OpenSUSE Install :: Panel Bar Changes After Reboot
Mar 22, 2010
I use the Air openSUSE theme for my panel bar, etc., yet, after rebooting (or starting up the computer after it has been shut down), the panel bar comes up as if it were configured with some kind of black theme, which I do not like - you can still see things like icons for windows, launcher, etc. except for the clock, since its font color is black.
How do I put a stop to this? I have tried everything I can think of, customized settings, different themes, and so on, yet I get the same results after booting into openSUSE.I am using the openSUSE 11.2 KDE version.
View 9 Replies
ADVERTISEMENT
Sep 14, 2010
I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
View 1 Replies
View Related
Jun 30, 2011
I ordered a SuSE 11.4 installation DVD from an online Linux Distro distributer that I've used before with no problems. I did this rather than burn my own DVD from the website. I thought that I might perform a fresh install of SuSE 11.4 on this Dell 1420 Laptop that is currently running Ubuntu 11.04.
Note, this is a completely fresh install, not a side-by-side installation with Ubuntu; I followed the installation sequence that completely repartitions the entire disk for SuSE, and accepted all of the suggested options regarding logon, etc.
Everything goes well ... sort of. The first install didn't reboot correctly, i.e., the set-up that is supposed to run after the initial install never happened and I had to manually power-down the machine and restart from the "safe mode." Needless to say, that didn't work as expected. So, I re-install, from scratch, trying different options: for instance, instead of LVM, I decide to have an un-encrypted partition scheme and accept the "obvious" options ... thinking that the LVM options interacted badly with the install. Eventually I get the installation to proceed correctly, or so it appears: it goes though the entire sequence, including the re-boot, building the default image, etc.
I test this image by removing the DVD, power-cycling the machine, and all looks good, so I begin the process of installing software updates, etc. Being paranoid, I re-boot the machine, and all restarts correctly, etc.
Now here's the annoying thing. The next day, I power the machine on, and it locks at the splash screen. By the way, these are the exact symptoms that I experienced with the bogus/incomplete installations. The boot sequence proceeds up to the splash screen and waits forever.
So, in sum: I spent inordinate amounts of time attempting to install this software, carefully following the instructions provided by the installer. In every instance, after leaving the machine off for a day or so and rebooting, I am met with a splash screen that sits forever. Needless to say, I am extremely reluctant to repeat another day of software installation to only have to re-start with no assurances of success. Either I go back to ugly Ubuntu (which has always worked out of the box, by the way), or I look at other options. I was hoping to use SuSE, but I really don't care which distro is on that machine as long as it works and it provides TeX, R, Emacs, Scheme, and a few other software packages that I'm sure are of no interest to your customer base.
View 4 Replies
View Related
Sep 15, 2010
I just wanted to install openSUSE 11.3 64bit. Installation works fine until reboot request. It switches to console, saying that it tries to load without reboot, screen becomes black, i got a cursor with animated wait-symbol and then it freezes. Can't move the mouse, no reaction on keyboard inputs, HDD-led not blinking. If I reset my PC and boot the new installation, it says that an error occurred and asks me to complete the unfinished installation. It starts auto-configuration and freezes again at about 3%. I tried again and some time it did not start the graphical yast but in textmode. The freeze came at the same position, but it posted many lines on console with error messages. I could not scroll, so I saw only parts of it, saying kernel panic and many addresses.
I guessed that it has to do with my chipset and graphics card, it is a nVidia GeForce 9300 chipset (MCP7A) with onboard graphics. It works fine with openSUSE 11.2 64bit by the way, but it was not supported in earlier versions than 11.2. So I tried to install it with proprietary drivers. I started the installation again and added the nVidia repository and a Packman repo and selected the driver which works fine on 11.2. Error was same as above. Next I tried an openSUSE 11.3 32bit Live CD that came with some PC magazine and lay around and it is booting and works fine!
This was confusing to me, so I wanted to try the 64bit version of the live CD. Which was again not booting. It freezes at some part, maybe when it tries to start X. But it also freezes booting with 'nomodeset' (found it somewhere here), in VESA mode and even in textmode! So i guess it's not X what causes the freeze. But it is sometime at the end of booting up, as far as I can say. I would like to use the 64bit version but I don't know where to search for the problem. I checked every checksum before burning, so a broken media should not be the reason
View 9 Replies
View Related
Jan 26, 2010
This system has AMD Turion with ATI HD 3200 Graphics system. Installation program correctly initializes graphics - all installation completes with automatic configuration - gives no option for sax2 to run. Then Suse does not comes up or the x does not comes up or display is not showing anything. I can switch to Vista and Vista boots works from grub menu. How can I test and configure graphics and monitor before installer boots the system?
View 1 Replies
View Related
Dec 21, 2010
I tried several times to install sue 11.3 on a amd 64 system by configuration a soft raid1 by this order:
md0 /boot
md1 /
md2 swap
or my problem, after configuration and install over the dvd and yast installation menu, after the first reboot I have a grub error -> nothing found.If i try to setup suse 11.2 over the same method, it works.after a system upgrade to 11.3 all is working fine. The only problem is by installing directly the 11.3 I also re-download the dvd and try over the netcd and it's all the time the same error.I searched in the forum but nothing found (perhaps i do a wrong search)
View 2 Replies
View Related
Dec 10, 2010
i have some problem with my Maverick, his gnome panel (top panel) always missing after reboot, and I always type gnome-panel & to get back my gnome panel, get back my panel permanently?
View 1 Replies
View Related
Oct 26, 2010
11.3 will not load after the first reboot during install, after the reboot the screen just goes blank and that's all.
This is a single setup no dual boot, from openSUSE-11.3-DVD-x86_64, on brand new Latitude E6510 laptop.
View 9 Replies
View Related
Jul 17, 2011
config is pentium D and nvidia 7300 , plus 1 gb of ram ; ok they had an 11.2 opensuse version and installed 11.4 from a cd (or dvd) they bought in a shop , the pc is working ok, but upgrades are NOT , how come ? This looks stange to me
- in init 3 : zypper cc && zypper ref && zypper up does not work : after reboot using "shutdown -r now" the pc is frozen, with the green screen and white lizard (no access to keyboard, nor to grub options), ctrl+ alt+ f1 is ko for example.
- in init 3 and only with 3 repos (oss, non-oss, and update of 11.4) a zypper dup works but a bug with mozilla firefox 4 brading opensuse which is ko . we continued , can one package break down a zypper dup ? ( same ko result : after reboot usinf shutdown -r now the pc is frozen with the green screen and white lizard (no access to keyboard, nor to grub options) )
View 9 Replies
View Related
Jul 1, 2009
Have openSUSE 11.1 and (AFAIK) KDE 4 on an older notebook; worked OK for weeks, then booting became a problem and the OS seemed to go to sleep between keystrokes: now the cursor stops blinking, the clock stops running, and nothing happens after clicking a radio button until the mouse moves. Am now 25 minutes into a reboot, hung at "Unmounting file systems" but it also hung for a while when changing run levels. Is this related to the stability problems with 11.1 I've read about? Possibly KDE? Where would I adjust a config to use kde 3.5 rather than 4?
View 9 Replies
View Related
Jan 12, 2010
I am installing 11.2 on an older machine, Athlon 2800+, GeForce 6800, 1 GB RAM. Install goes fine until try to reboot to the OS and just get massive garbage on the screen. Can't see anything just lines crossing the screen, it seems almost like the resolution is way off but don't know how to change that since I can't see anything. I tried two different install disks to make sure not the problem and got the same thing with both. I tried installing both KDE and GNOME on separate occasions and still same problem. I have used the same install disk to put this on an even older machine and that went fine. I do have windows 7 installed on another partition. I'm fairly new to linux but I'm learning.
View 9 Replies
View Related
Jul 7, 2010
in a previous version of openSUSE (I think it was v10.3), there was a possibility to directly/automatically start another OS after exiting (rebooting) openSUSE. This could be done through "right-clicking" on the Reboot (Restart) button from the KDE's log-off dialog and choosing the OS you wanted to be started after the restart. Please, does anybody know if this is possible in openSUSE 11.2 (KDE 4.4)? PS: I know that GRUB enables that, but I prefer a "GUI way" rather than using command line and editing configuration files
View 4 Replies
View Related
Jan 2, 2011
I have the problem that for working properly my soundcard needs sort of re-initialisation after every reboot (11.3, 64 bit). I have to change a setting in the sound module of yast that causes the yast to rerun its final steps. What is not working otherwise is audio playback from a usb TV-stick (recording is no problem, same as playing an audio/video file). any idea what might be the problem? how to call the final steps of the sound module of yast from the command line, I could at least put that call into boot.local to avoid having to call yast.
View 9 Replies
View Related
Feb 23, 2011
I recently got myself a seagate 2 TB external usb harddrive.
I formatted it with ext3 and the fstab looks thus:
Code:
(the problematic device is in red) it worked well for a couple of weeks, but then, one day, after i rebooted, my machine can t find the device:
Code:
I ve rebooted a couple of times, but to no avail.
View 4 Replies
View Related
Mar 16, 2011
I would like to remotely reboot a computer (via ssh) to a non default kernel. If I just type reboot, it reboots to the default kernel. Man reboot(8) does not give any hint so I am not sure that is possible at all. I have found nothing googling around either.
View 6 Replies
View Related
Apr 2, 2011
On one of my computers that I upgraded from 11.3 to 11.4 with a SSD HDD, it no longer umounts any disks on reboot or shutdown, there are no errors shown, it goes from sending TERM and KILL to rebooting.here is my fstab:
Code:
/dev/disk/by-id/ata-OCZ_SOLID_SSD_MK0109030A6100011-part1 /boot ext4 acl,user_xattr,noatime 1 2
[code]...
View 6 Replies
View Related
May 11, 2011
I hope I open the thread in the correct section.I have just installed OpenSuse 11.4 with XFCE environment on my Acer Aspire 5738Z.Everytime I boot, I experience the following "strange" behaviours:1 - I need to reconfigure manually the "capture device" with Alsamixer to change it from "micro" to "internal micro". Even though I restore a taylored asound file with alsactl, as I used to do when I used Ubuntu, every time I restart my computer, the capture is on "micro" again.2 - In the panel, I need to remove the Thunderbird launcher. I remove it everytime I log in on Suse, but it comes back after every reboot.3 - Skype and Pidgin start automatically, even though they no longer are in my list of apps to start automatically after log in. (They once were, but then two instances of each tried to start at the same time).Besides, I have another problem with the action button, the one that enables to shut down, restart, hibernate, etc. When I click on it, I will immediately be logged off.
View 1 Replies
View Related
May 29, 2011
Running OpenSuse 11.4 and have setup 2 x Raid5 configs - raid created, disks format, everything working fine. I've just rebooted and the raid5 fails to initialize.
Getting these errors:
Code:
May 29 16:58:30 suse kernel: [ 1788.170692] md: md0 stopped.
May 29 16:58:30 suse kernel: [ 1788.197864] md: invalid superblock checksum on sdb1
May 29 16:58:30 suse kernel: [ 1788.197876] md: sdb1 does not have a valid v0.90 superblock, not importing!
[Code]....
View 9 Replies
View Related
Jun 4, 2011
I am in possession of a new HP HPE-570f PC which I bought this morning. This has AMD Phenon 1090T and AMD Radeon HD 6770 graphics card. The OEM Windows 7 works fine. When I try to install Suse 11.4 using same DVD that works on my other (older) machine, I see the Suse Installation screen from which I select "installation", then comes the "Loading Linux Kernel" progress bar. As soon as the progress bar gets to the end, the computer reboots! Then of course I end up back at the Installation screen since the DVD is still in the drive.
View 9 Replies
View Related
Jan 31, 2016
Installed Debian 8 Lxde desktop yesterday. All worked fine post install. Executed following two commands to make system up to date:-
Code: Select allapt-get update and Code: Select allapt-get upgrade
Switched off my system after using it for close to 3 hours. Today I booted my system and I could not see any GUI in action except mouse pointer. What I can only see is clicked on my camera and posted below for your review.When I get the login screen, I can choose different DE (fluxbox) and I was able to login and do some action. I don't know the reason for this sudden disappearance of desktop.
View 7 Replies
View Related
Nov 18, 2009
After successfull installation of Suse 11.2 and reboot i get a Blackscreen. When i try to start with "init 3" its still the same problem, Error Message in Bootlist
"Failed to get NUMA Memory Information from." Suse stops loading after "HAL DAEMON - DONE" and gets a blackscreen. If got a Nvidia Gforce 9400GT Graphic Card, and a Athlon 2 x2 Processor. I loaded the DVD with Bittorrent and Checksume and Burning are o.k/successfull. I also tried to reinstall with ext3 but still the same problem. Are there any known issues/solutions for this Problem?
View 9 Replies
View Related
Apr 4, 2010
Whenever I reboot or shut down my computer (running OpenSuse 11.2 on a Dell Studio 15), it makes a weird noise that sounds like very loud static, even if my sound was muted when I selected shut down.
View 9 Replies
View Related
May 18, 2010
Yesterday I used gparted to shrink win xp partition and to expand opensuse. When I try to reboot my laptop it doesn't boot anything, and it doesn't dislay on the screen anything like missing grub, grub rescue. I have opensuse 11.1 gnome on acer 5920g
View 5 Replies
View Related
May 26, 2010
My server is opensuse 11.1 I recently wrote a small script to quickly shut down or reboot my server (I needed this because I need to close an application manually before shutting down. The shutdown line in the script was: /sbin/shutdown -r now When I tested the script (as root) from the console terminal, It worked just fine but after reboot strange things started to happen if I logged in as root - while the mouse works, the keyboard freezes (rebooting the server does not help). While I can still use console terminal, if I try to start any application that requires root permission or log in as root from my sftp client then I will get an error on the server that says; broadcast message from root (time & date), the system is going down for reboot now! I have since commented out level 6 in my inittab, so that now when root sends a reboot signal and It shows the message about going to reboot, it does not actually go into reboot anymore because of the commented out line but that is ofcourse not an healthy way to go about it.
View 4 Replies
View Related
Aug 3, 2010
I am trying to update my OS from Opensuse 11.2 to 11.3 using the installation DVD (checked OK). Everything is OK during the installation process until the message "System is going to reboot" is displayed with a countdown : when the countdown is finished, the screen becomes black and the screensaver starts, but the system does not reboot. When I reboot manually, after selecting "Opensuse 11.3 desktop" on the first menu, the screen becomes black and the screensaver starts.
So the installation seems incomplete and I do not know how to finalize it. When I select the failsafe option on the first menu, it seems to work but some behaviours are quite "strange"... When I choose update instead of installation at the beginning, the behaviour is the same.
I do not know if it is linked but the firmware tests started from the installation DVD show the following errors :
Memory tests are OK.
View 5 Replies
View Related
Sep 13, 2010
After reading this article openSUSE News - Forum Users Benefit from openSUSE KDE Repository I added that KDE repo to yast and switched all packages.
After rebooting it says (failsafe kernel configuration says the same):
Kernel panic - not syncing: VFS:
Unable to mount root fs on unknown block (0,0)
And stops at this string: "[<c0203826>] kernel_thread_helper+0x6/0x10" and capslock light is blinking.
View 8 Replies
View Related
Oct 4, 2010
I recently installed open SUSE 11.3 on my computer which I built myself and the problem I have is after rebooting the computer, I get a black screen. It will not boot the operating system. Here is my component specification:
Video Card: BFG GeForce 8800GTX 768MB 384-bit GDDR3 PCI Express
Motherboard: DFI LP DK 790FX-M2RS AM2+/AM2
CPU: AMD Phenom II X4 955 Black Edition 3.2GHz
Memory: CORSAIR XMS2 4GB (4 x 1GB) DDR2 800 (PC2 6400)
HD: Western Digital Caviar SE16 320GB 7200 RPM 16MB Cache SATA 3.0Gb/s
Another question is, where can I purchase SUSE 11.3 and if I do purchase, will I get help on the phone installing it ? Pleas keep in mind that I have little experience with SUSE Linux.
View 9 Replies
View Related
Nov 21, 2010
Recently I installed openSuSE 11.3 x64 on PC with Intel motherboard, 4GB RAM & two of 1TB WD RE3.Of course I set RAID1 during installation After some struggle with GRUB which pointed to wrong devices after installation I started to work. But suddenly I found that file system is corrupted after every reboot (It does not depend on what I use and what the way I use - reboot, shutdown -r now or even just poweroff - everything follow to:
Starting MD Raid mdadm: /dev/md2 has been started with two drives
mdadm /dev/md3 has been started with 2 drives
mdadm /dev/md4 has been started with 2 drives
mdadm /dev/md5 has been started with 2 drives
[Code]...
View 7 Replies
View Related
Dec 24, 2010
After installing Opensuse 11.3 i get massive graphical errors after reboot. Those errors directly start after the first resolution change after grub. So i used nomodeset from now on and installed the drivers from nvidia.
After this X11 only flasht up very shortly and i got this logs:
Code:
View 9 Replies
View Related
Feb 6, 2011
I have a fresh install of openSuse 11.3 installed. But after the install the auto reboot nothing happens screen turns off, I restart comp grub came up.
OpenSuse (Default)
Failsafe openSuse
Windows 7
I select default the little gecko loading screen comes up then after 15sec screen goes black screen actually goes into idle mode, button pressing mouse moving nothing effects it. I reboot again select failsafe, text screen comes up going through list everything green, then screen turns black doesn't go into standby just black screen. I reboot try default with nomodeset loading runs same as failsafe except when comes to x-server screen goes black.
I have 2 displays a 18" Dell digital lcd Monitor, and my 26" TFT TV, They are both connected to a Gigabyte Nvidia GeForce 8400 GS, TV with HDMI and Monitor with DVI-I. I have a second 18" Dell LCD Monitor, which I had connected with D-Sub but I couldn't get all 3 working so disconnected second monitor, as i wanted tv over monitor. I had ubuntu 10.10 running before the opensuse 11.3 install it worked fine but i wanted to try suse.
I thought it might have been that I was picking KDE desktop then adding Gnome later in installation, so tried reinstalling default install same problem, tried gnome alone same issue, tried gnome and KDE and same issue. so i put original idea back on KDE and gnome later in install. and im sticking with this until I fix as its the one I want. But if I really have to I will switch back to ubuntu. I have no Linux experience.
View 1 Replies
View Related
