Ubuntu Installation :: Installer Cannot Create A Shared Fat32 Partition With Win 7
Oct 12, 2010
I have win 7 installed on a primary partition along with two other primary partitions containing a recovery partition and system files partitions. (don't know exactly what the latter is for.) I made a defrag and resized the win partition to make some free space for a primary ubuntu partition.I then inserted the 10.10 live disc and created a fat32 shared partition, a root (/), a /home Nd a swap in the advanced gparted menu, BUT every time I try to initiate the installation I get an error message saying that installer couldn't create the fat32.
View 4 Replies
ADVERTISEMENT
Jun 13, 2010
I am having the same problem. I did delete partition trying to create a new shared fat32 one.below fdisk -l screen..I booted from live CD and tried quite a few things already...I think I need a clear direstions for it is getting annoying...
Device Boot Start End Blocks Id System
/dev/sda1 1 5906 47437866+ 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
[code]....
View 5 Replies
View Related
Apr 28, 2011
Am trying to format my SD card and creat a FAT32 partition for booting
after following procedure i was stuck with the below command
Command (m for help): [t]
Selected partition 1
Hex code (type L to list codes): [c]
Changed system type of partition 1 to c (W95 FAT32 (LBA))
i don't have the [c] option or any "W95 FAT32 (LBA)"
View 3 Replies
View Related
Oct 3, 2010
I am dual booting windows 7 and ubuntu 10.04 using grub. I am using a 1tb samsung hard drive. Ubuntu has 750gb and windows has 250gb. I want 500gb of my HD to be FAT32 so I can put all of my music, pictures, and videos on it. I don't have more than 100gb used on either partition.
I have done quite a bit of searching and browsing, but I can't find a good step by step guide to do this. I am guessing I need to figure out how to use fdisk?
View 3 Replies
View Related
Jun 19, 2010
I dual boot, in the process of installing Windows 7 & Fedora 13 on a new drive. Back in the day when it was risky for the newbie to read/write NTFS, I created a "shared" FAT32 partition. Even though the later Fedoras could read/write NTFS fresh out of the box, I have kept the "shared" partition for my important files (email, documents, digital camera pics).
Now that I'm installing Win7 and Fedora 13 on a new hard drive and I'm partitioning my disk, I'm scratching my head trying to decide how I should format this partition. I was considering the FAT32 again, but I'd like 50GB, not just 32. At the same time, I'm thinking of making the size sacrifice because, and maybe this is just carryover from the olden days and groundless, I have an irrational worry about using NTFS for my most important files.Maybe someone could assuage my fears. Is it just as safe, at this point, for files to be on a NTFS partition and run under Fedora as they are under FAT32?
View 6 Replies
View Related
May 15, 2011
On my Linux system, I want to create a symbolic link to a folder on my Windows 7 partition formatted FAT32. I use:
sudo ln -s /media/OS/Users/dennis/AppData/Roaming/.minecraft ~/.minecraft
However, I end up with a file in my home directory called .minecraft and when I try to access it, I receive:
bash: CD: .minecraft: Too many levels of symbolic links
is there a way to make the symbolic link to the FAT32 folder?
View 2 Replies
View Related
Oct 2, 2009
when i try to install fedora 11 on my laptop my Fedora 11 Preview installer crashes after attempt to create a partition. How do i overcome this problem
View 6 Replies
View Related
Apr 5, 2010
I'm installing a new SSD this upcoming weekend. My thought was to go easy on it so it lasts longer by putting my swap files on a mechanical drive instead of the SSD. I don't - however - want to waste space for swap files. It would be nice if I could use the same 6GB FAT32 partition for swap files for both Windows 7 and Ubuntu. Is this possible? It might not even be necessary though, I have enough RAM that I rarely use the swap file at all (I've even considered going without swap all together), so it probably won't pose a huge load to the drive.
View 9 Replies
View Related
Jun 28, 2010
I purchased a new HD and my goal is to have a Windows partition, an Ubuntu partition, (a swap partition of course), and large fat32 partition for storing data to be used on both the Windows and the Ubuntu side.
I am installing from USB and do not yet have a copy of Windows to install. I keep getting an error saying that the attempt to mount vfat failed.
View 6 Replies
View Related
Mar 17, 2010
I formatted 56 GBs of my hard disk space into fat32 and it seems that 27 gbs of it is used! Though direct checking from the volume itself shows nothing like this, gparted still insists 27 gbs are used.
View 4 Replies
View Related
Feb 18, 2011
I have created live persistent usb-hdd (fat32) image, put into USB stick, but now I should create persistent live-rw partition. How this persistent partition should be formatted? Should I format with ext2, or fat32?
View 1 Replies
View Related
May 28, 2010
I would like to get Linux working on my new Compaq CQ10-130ca. I was on ubuntu a few days ago, and the was a fast and easy way to create exactly that. Now I come back, the site has changed, and the USB key method too! I have tried to follow the instructions, but failed completely.,. Does anyone have an "easy" way to do this, or at least clearer explanations on how to proceed ?
View 8 Replies
View Related
Jan 9, 2010
I am currently installing 11.2 on a new 1TB hdd.the opensuse installer does not allow me to create a / partition (ext4) >20GB. Does anyone know why and how I can get around this limitation?
View 9 Replies
View Related
Aug 17, 2010
using suse 11.3 and kde 4.4.4 on the mounted fat32 partition I cannot change icons partition is mounted in fstab in this way:/dev/sda8/ /dati vfat user, users, gid=users, umask=0002, utf8=true, 0, 0.I can create files folders modify, move and save them on the partition but if I try to change the icon (in dolphin right click>properties>click on icon) of the /eros folder (or any other folder or link) system gives me
this error:impossibile salvare le proprieta' , non hai accesso sufficiente per scrivere su /dati/eros/.directory tha in english is something like this: impossoble save properties, you havent enough permission access to write on /dati/eros/.directory this happen also as superuser I remember that with suse 11.0 or 10.3 I was able to change icons on fat32 partitions, now with 11.3 I cannot, there ought to be a way to do what I did with the previous version with this 11.3 brand new ad more advanced version shouldn't it?
View 11 Replies
View Related
Jul 11, 2010
i cant install 10.04 on my desktop with the 32bit or 64bit versions of 10.04 desktop.
i get to step 4 and there is nothing listed for partitions or any information and if i click forward, i get that message "no root file system is defined" "please correct this from the partition menu"
View 1 Replies
View Related
Oct 28, 2010
When using the gparted option to create a new partition table does this automatically create a new mbr?
View 1 Replies
View Related
Jun 11, 2010
I want to create a "Shared Memory" in linux, then create multiple "Shared Objects" that can access to a Table for example; And one of them can write something into the Table and the other can access and read it, so that these operations can be handled by programmer! I'm using Ubuntu 9.04 and I've set it's runlevel at 3 (I have commandline environment now!) I've searched the Internet so much, but couldn't find a good sample code for this! I have no experience about it and need your help to introduce me a sample code about it and advise me how to compile and use it with "GCC"?!
View 6 Replies
View Related
Dec 20, 2010
This is maybe the 15th time I've installed an Ubuntu OS in the past two years, and it's the first time I've really been stuck.Not long ago I installed 10.10, with no problems, but a couple days ago I did a fresh install of windows 7, and I planned to re-install ubuntu 10.10 alongside it.Before I installed windows, I created a partition on my 320gb HD, half and half, but while doing this I noticed that gparted would crash if a USB key was plugged in. I mention this because I'm convinced this is related to the problem.
After having installed windows, I went and created a bootable usb key with 10.10 using unetbootin (which I've used once before, but along time ago). I'm unable to make an actual live CD because my disk drive has been broken for the past year - a fact that has never stopped me from installing different distros with a usb key.So the installer starts as usual, but after the 2nd (or 3rd) step (where it says "for best results, make sure that your computer is plugged in, that you have an internet connection, and at least [...] of free space), I click forward, and the little wheel just spins forever,it never advances.I tried everything again with 10.04.1 and I got the same thing, this time after choosing my keyboard layout.
When I simply go to the live distro and then go to install, I see that at that moment, there's a crash report, something about gparted, which I'm assuming is a built-in part of the next step.
To sum up
-gparted doesn't seem to like USB keys
-installer won't advance to partition table
-can't use a disk because drive is broken!
My computer is an Acer Aspire 4530, AMD64. The 10.10 and the 10.04.1 installations were both 64bit.
View 8 Replies
View Related
Oct 25, 2010
This is my partition table:
/dev/sda1 1 4255 34178256 83 Linux
/dev/sda2 4256 4437 1461915 5 Extended
/dev/sda3 * 4438 9964 44395627+ 7 HPFS/NTFS
[code]....
View 4 Replies
View Related
Apr 24, 2011
I'm trying to install Ubuntu 10.10 on a brand new 500GB hard drive I just purchased and installed in my machine. I boot from the CD and instruct Ubuntu to install to this drive and tell it to "erase and use the entire disk" for this 500GB drive. After moving forward from that, I see it saying a message about creating an ext4 partition for root "/" and then shortly after the entire install dialogue goes away. All I am left with is the little circle cursors spinning round (mouse input still works) and the installation background. The HDD activity light was still on though. I gave it about 3 hours before I finally gave up and tried again.
When I tried again, I saw that it did create two partitions (root and swap) during the last attempt. The same thing happened, although now even mouse input isn't responding so my system is completely locked up. HDD activity remains active this time as well. Running Ubuntu from the CD works fine. The only problem I saw with it was when I ran gparted from the CD and tried to manually create a ext3 partition on my new disk drive. When I tried that, I ran into a similar occurrence (couldn't run any programs, eventually system locked up) and had to reboot.
I have a second hard disk but I have a lot of valuable data on that and don't want to mess around with it. It could be a hardware failure, but that seems unlikely to me as this is a brand new Seagate disk drive. I suppose I could try installing it on a spare partition on my other drive and see what happens, but other than that I'm out of ideas.
View 3 Replies
View Related
Jan 18, 2010
i already reserved the space for the partition, from what i have read so far, it has to be FAT32 or NTFS. also my major question is how i would be able to point both OS to save my files to the 3rd partition i am creating for sharing. cos in my experience, windows likes to store files in its home partition without even giving u an option to see other partitions in ur system, ubuntu at leastb allows me see the other partitions on the drive.
View 3 Replies
View Related
Sep 30, 2010
I am trying to install windows 7 on my harddive, I am running ubuntu 10.04 and have windows 7 on DVD.I was until recently also using uberstudent, which I deleted (100 gigs) to make space for windows.However once I get to the windows start up I get a message: setup cannot detect or create a partition for this partition. (not word for word).
View 1 Replies
View Related
Jun 12, 2009
When using the manual partitioner on the fedora 11 installer on the live cd, both for 64 bit and 32 bit, it will not allow me to create a new partition. I understand that I have four primary partitions and it cannot have more than that, so I tried deleting one of the partitions, then creating the new ext4 partition for F11. It still fails and gives me the same bugsee attachment)
how to read this, especially since there is so much there. I see at the top it says that there are 4 primary partitions, could it possibly still be seeing 4 primary partitions when trying to create the new one, even though I am deleting one of them? Other than this, I truly have no idea what else I can do.
EDIT: Attachment wont load up for some reason, here is some of the error file:
anaconda 11.5.0.59-1.fc11 exception report
Traceback (most recent call first):
File "/usr/lib64/python2.6/site-packages/parted/disk.py", line 183, in addPartition
constraint.getPedConstraint())
[Code]....
View 5 Replies
View Related
Oct 14, 2010
I've not jumped on the Alpha/Beta upgrade's this time round so have decided to upgrade by doing a fresh install. I'm using the normal desktop install cd via usb. On the drive setup I choose to manually setup the partitions. I deleted the partition which help Lucid. Created a new partition with the root path. All good so far. I selected my home partition and selected use as 'ext2', entered /home as the mount point. Clicking ok to return, showed the /home partition as marked to be formatted, I was unable to change this ... so I decided to quit the installer and reboot ...
1st problem ... the root partition for Lucid was deleted, and a new empty partition created, despite the fact I had not confirmed the actions.
2nd problem ... rebooting with the live cd (which I'm on now) and running the installer, it hangs when I select manual partitioning.
View 7 Replies
View Related
Feb 3, 2011
So I decided to reinstall my 10.10 to undo the 'encrypted home folder feature.' I know are other ways to undo the encryption, but for various reasons I'd rather just do a quick reinstall and start fresh.Currently, I dual boot linux and windows, each with their respective partitions. There is also a storage partition that is fat32 to swap files between the two OSes. So the partitions are:
[Code]...
View 5 Replies
View Related
May 31, 2011
I got tired of dual booting on my old computer so on the new computer I am planning to run XP on VMware Player. The problem is that on the new computer neither Ubuntu or XP can "see" the FAT32 partition. I intend to use the FAT32 partition for photo images and old Windows files and need access from both Ubintu and XP.
Partition table entries are not in disk order.
View 5 Replies
View Related
Mar 21, 2015
Tried to install Jessie RC1,but installer hangs on formatting the partition,at 33%.
View 7 Replies
View Related
May 19, 2015
I created a bootable Debian installer on my USB flash drive. The Debian Installation Guide advises;
The hybrid image on the stick does not occupy all the storage space, so it may be worth considering using the free space to hold firmware files or packages or any other files of your choice. This could be useful if you have only one stick or just want to keep everything you need on one device. Create a second, FAT partition on the stick, mount the partition and copy or unpack the firmware onto it.
I want to put non free firmware packages on the stick but when I try to create a FAT partition in the free space using Disk Utility I get the following error;
Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sdb, start=661837824, size=7507093504, type=
Entering MS-DOS parser (offset=0, size=8168931328)
MSDOS_MAGIC found
looking at part 0 (offset 0, size 657457152, type 0x00)
new part entry
[Code] ....
I formatted the drive to clear it, created a new FAT partition and copied the Debian.iso to it again. When I tried again to create a partition in the free space the same error occurred.
View 7 Replies
View Related
Jan 12, 2016
I have an issue with Gparted v0.19.0 (Jessie) which has replaced v0.12.1 (Wheezy) which works fine. I had hoped to ask this question in Gparted's own forum, but after three weeks and multiple attempts no-one has approved my account there.
Unfortunately, my existing partition structure (on two different laptops) seems to be invisible to the new version of Gparted. Since parted seems to be used by the Debian installer, the Jessie installer cannot install on these machines without repartitioning the entire disk. That means that on such machines, the only option is to wipe everything or install Wheezy, then edit sources.list to upgrade to Jessie.
Both Gparted v0.19.0 and the Jessie installer report the entire hard disk as a single Fat16 partition,The same partitions which are invisible to Gparted appear as normal in the Places sidebar, of either Thunar or the PCManFM file manager. They can be mounted and used, seemingly without issue (I have experienced the same problem under Ubuntu/Lubuntu 15.10). Below, is the shell output of fdisk, which can see the partition structure and parted, which cannot:
Code: Select all$ sudo fdisk -lu
Disk /dev/sda: 74.5 GiB, 80026361856 bytes, 156301488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[code]...
View 6 Replies
View Related
Aug 21, 2009
This is my first time using Fedora. My previous experience is from Ubuntu. However I want to give a try for Fedora so I went ahead to install it on my new computer. Problem is that Fedora Installer (Live CD) wiped out my NTFS Partition. Causing my computer unable to recover Vista from factory DVD because it lost system partition as well. I want to know if this is my error or a bug in installer.
Original partition setup:
220 GB - Vista System Partition (NTFS)
14 GB - Recovery Partition (NTFS)
First I resized system partition under Windows Management in Vista:
170 GB - System
50 GB - Unallocated
14 GB - Recovery
Using GParted from Ubuntu 9.04 Live CD, moved recovery to the left:
170 GB - System
14 GB - Recovery
50 GB - Unallocated
Rebooted into Vista, make sure everything is fine. Then put in FC 11 Live CD, using custom layout setup in partition, intended partition layout is:
170 GB - System (NTFS) - Primary sda1
14 GB - Recovery (NTFS) - Primary sda2
200 MB - /boot (ext3) - Primary sda3
sda4 - Extended Partition
45.8 GB - / (ext4) - sda5
4 GB - swap - sda6
After I check my setup and pressed enter, it returned with unable to format /boot error: -1. Restart FC installer, it tells me that my hard drive needs to be re-initialized. I clicked no and reboot. BIOS tells me that no OS is found. Attempting to recover from factory DVD failed, telling me that system partition is gone. I want to know did I do something wrong or is this a bug in FC installer.
View 6 Replies
View Related