Ubuntu :: Root Filesystem Fills Up When Copying A Large File?
Mar 17, 2010
I was just copying a large (50GB) file from one mounted partition to another mounted partition (a USB drive), but before the operation completed, my root filesystem, on a separate partition, filled up.Because it filled up I also couldn't get past the login when I rebooted. I think this is because there is no room to load temporary files. I'm expanding the root partition to temporarily fix this. how can I avoid my root file system filling up when copying a massive file between mounted partitions? the file is being cached in root during the transfer.
View 3 Replies
ADVERTISEMENT
Feb 17, 2010
I am trying to copy a file from a network resource on my Local Area Network, which is about 4.5 GB. I copy this file through GNOME copying utilities by first going to Places --> Network and then selecting the Windows Share on another computer on my network. I open it and start copying the file to my FAT32 drive by Ctrl+C and Ctrl+V. It copies well up-to 4 GB and then it hangs.
After trying it almost half a dozen times I got really annoyed and left it hung and went to bed. Next morning when I checked a message box saying "file too large to write" has appeared.
I am very annoyed. I desperately need that file. It's an ISO image and it is not damaged at all, it copies well to any windows system. Also, I have sufficient space on the drive in which I am trying to copy that file.
View 8 Replies
View Related
Mar 4, 2010
My root filesystems flooded so I'm trying to move it to another (bigger) partition but I'm not sure of the best method. I just tried to use "dd if=/dev/sda1 of=/dev/sda6" to copy it but all that did was give me a brand new partition with no freespace available presumably because the filesystem is smaller than the partition. Is it possible to make the filesystem bigger?
View 8 Replies
View Related
Jan 27, 2010
Have been running 11.1 on a generic notebook (eRacks) just fine until a few days ago when CUPS couldn't be reached. Rather than futz more with 11.1, I decided to install 11.2 (which has been on my desktop). Using the same CD, which continues to check ok, the install has failed many times at about the same point: 87% through "copying root filesystem" in yast2.
Specs: Intel P4 2.4 GHz, 1.5 GB RAM, ATI radeon PV250Lf
The HD was partitioned into /, swap, /home, and an extended partition of /opt, /var, /usr. Only / was ext4 and the rest were ext3. Tried various options:
* no apic
* no acpi
* "noapic acpi=off" entered manually
* Vesa instead of 1024x768
Each time had to edit partition table to mount the extended partitions. Always formatted /. At first didn't format the extended patitions, later formated all but /home. Then set yast2 to format / as ext3, to match the other partitions. In the sysinfo page the / partition is now shown as /mnt containing 723.6 MB out of 7 GB, still formatted as ext4. On rescan by yast2 partition manager, / shows as ext3. The install halts every time with an error while "copying root filesystem." Tried booting from the CD direct to install and to the Live OS followed by install--same result. So, hours later, went back to 11.1--which installed in minutes.
View 4 Replies
View Related
Jun 15, 2010
I am having a bit of a problem with my Ubuntu Server 10.04 install. I think it might be a kernel problem. Basically, what happens is when I copy a large file (a 160GB disk image) to my drive (>60GB) the system consistently crashes after about 60GB of the file is transferred. It doesn't matter if I am sending the file using cifs, or over SSH. Checking syslog (paste dump here), it seems these flush errors always appear shortly before the crash occurs. The destination filesystem is a hardware RAID 10 array with 2TB of space. It is formatted as EXT4.
View 7 Replies
View Related
Apr 22, 2010
I'm planing to copy a productive mysql innodb file from one server to another, and the file size is around 300GB. As the file is keeping changing all the time, I have to shutdown mysql instance and copy the large data file to other server as quickly as possible.I should have to find a way to speed up file copying ... I'm wondering whether there's a way to copy file block by block.If the destination side block has same content, then bypass it.
View 4 Replies
View Related
Oct 15, 2010
This has happened several times now, with 9.10 and 10.04. I back up my photos periodically to external drives, using Nautilus. At the next attempted login Gnome won't start and sometimes gives power manager incorrect installation error.
First time this happened I was stumped and eventually did a clean install. Second time, I found advice elsewhere in this forum to solve this by emptying root trash, which did the trick. This time, however, root trash has nothing in it and 2 users trash were insignificant (I emptied them all anyway with rm -r). Tried looking for enormous directories but couldn't find a smoking gun. I would rather not end up doing another clean install - a painful and extreme solution. I'm continuing to look for solutions to the immediate problem, but my question really is, what causes this and how do I prevent it in the future? I've run Computer Janitor regularly and ran apt-get clean but no help. Should I do all my large scale copying from terminal? I'm not a total noob, but close.
View 9 Replies
View Related
Nov 24, 2010
I am trying to copy a 7.3gb .iso file to an 8gb USB stick and I get the following error when it hits 4.0gb
Error while copying "xxxxxx.iso". There was an error copying the file into /media/6262-FDBB. Error splicing file: File too large The file is to be used by a windows user, and I'm just trying to do a simple copy, not a burn to USB or anything fancy. Using 10.4.1.LTS, AMD Dual Core, all latest patches.
View 2 Replies
View Related
Dec 21, 2010
My linux distro is CentOS 5.3. Today I edited /etc/sysconfig/readonly-root and set "READONLY" to yes, now my /etc/sysconfig/readonly-root file is like this:
# Set to 'yes' to mount the system filesystems read-only.
READONLY=yes
# Set to 'yes' to mount various temporary state as either tmpfs
[code]...
View 3 Replies
View Related
Jul 23, 2010
I am trying to copy four files from my machine, through a second machine, and finally to the destination. The destination computer can only be reached through the second computer, and I am curious to know if there is an easy way to do this. I am able to ssh to the middle machine and then ssh from there to the destination. I know that I could just copy from the first machine to the second, and then from there to the third. I guess that I'm curious to know what kind of command I can run to do this all at once or even if I could do such a thing (which I'm betting I can). I need to copy these files as root on the destination machine too.
View 6 Replies
View Related
May 20, 2010
Well, when I copy large amount of data the other applications than Nautilus freezes until the copy is done...
So, what can I do? Because when backuping some data this is really annoying =/
View 6 Replies
View Related
Oct 20, 2010
I am running Ubuntu Linux 10.04.1 on an AMD 64-bit system. The server is primarily used for Windows file sharing via Samba in a small local network. I use webmin and putty to administer the system. I have two 1.4 TB drives for storage and one 500 GB drive with 18 GB mounted for root.I performed a large cut & paste operation (25.8 GB of files) using the File Manager in Webmin to move a certain folder into another folder within /media/Work. The operation failed and I am now getting a "root filesystem full" error, and am stumped.
View 8 Replies
View Related
Feb 10, 2010
I've a directory containing around 2.8 lacs of files. I want to move them to another directory.If I use cp or mv then I get an error 'argument list too long'. If I write a script like
for file in ls *; do
cp {source} to {destination}
done
then because of ls command , its performance degrades.How can I do this?
View 7 Replies
View Related
Mar 15, 2011
I am facing problem in copying a large number of file 18 lakh (18,000,000) files from my personal hardisk to another hardisk each file is very small and size of folder is around 3.95 GB copying files using copy given by Windows is frustrating and I am not even able to compress file its giving me error that its not readable.And problem is I am not able to open this drive in Linux it showing me error there saying do diskchk in Windows and Windows disk check is also not able to repair this drive and goes into some mode unsolvable.Is there any way to open disk with error to open in Windows and if not any way I can copy data faster?ERROR: Disk labled EDU is corrupt go to windows and chkdsk /f there and reboot into window 2 times.
View 3 Replies
View Related
Jan 11, 2010
I just bought a HP 3085dx laptop with an intel 5100 agn wireless card.
The problem: copying a big file over the wireless to a gigabit hardwired to the router computer only gives an average 3.5MB/Second transfer rate. If I do the same copy from my wireless-n macbook pro to the same computer. I get a transfer rate of about 11MB/sec. Why the big difference? I noticed the HP always connects to the 2.4 GHZ band instead of the 5GHZ bands...
On the HPL
[jerry@bigbox ~]$ ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:246:36:AC4
inet addr:192.168.1.75 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::224:d6ff:fe36:acc4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:639243 errors:0 dropped:0 overruns:0 frame:0
TX packets:1293049 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:53832795 (51.3 MiB) TX bytes:1888619922 (1.7 GiB)
[jerry@bigbox ~]$ iwconfig wlan0
wlan0 IEEE 802.11abgn ESSID:"<censored>"
Mode: Managed Frequency:2.412 GHz
Access Point: 00:24:36:A7:27:A3
Bit Rate=0 kb/s Tx-Power=15 dBm
Retry long limit: 7 RTS thr: off Fragment thr:off
Power Management: off
Link Quality=70/70 Signal level=-8 dBm Noise level=-87 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I am not getting any errors. I don't know why the bit rate is not known. My airport extreme base station typically reports that the 'rate' for the hp is typically 250~300MBi and about the same for the MacBook Pro. The hp is about 6 inchs away from the base station. Is there anyway to get the rascal to go mo'faster? Is there anyway to get the rascal to use the 5GHZ band.
View 3 Replies
View Related
Jul 13, 2009
For my research I have some very large files that are basically millions of lines of ten columns of numbers. These files can be up to 5 GB in size. Recently I noticed that when I made a copy of one of my files, some exclamation points appeared in it where there should not be any: in front of random numbers throughout the file. Making another copy of the file would result in exclamation points in front of different numbers in different parts of the file. Doing this many times has given me up to four exclamation points in different parts of the file. Sometimes the file copies just fine without producing any extraneous exclamation points.Additionally, I have occasionally seen a "^K" where there should be a newline (the data that should have been on the next line was instead on the previous line with a ^K in front of it) in copies that I have made of my files. I don't know if this is related or not.
View 7 Replies
View Related
Mar 27, 2010
When I try to boot to OpenSUSE I get the following error during boot-up: unknown filesystem type 'reiserfs' could not mount root filesystem - exiting to /bin/sh$
This only started happening quite recently - before this I could boot to Linux quite happily.
View 6 Replies
View Related
Dec 3, 2010
I've just checked my apache error log and it's filled with this:
Code:
[error] [client 127.0.0.1] File does not exist: /srv/www/htdocs/announce
Every 8 minutes or so.
I'm running rTorrent as daemon on same machine, and I suspect it's trying to access something like http://localhost/announce. But that's just my guess, is it some misconfiguration of rTorrent, and how do I fix that? Or should I just ignore all those errors.
View 3 Replies
View Related
Apr 8, 2010
Well I was looking into backing up my system and with some excellent help from remeeraz in another post just realized how big the filesytem for fedora was. On my system at least its showing 10GB of used space. Now im not sure if that includes the swap file aswell but as explained in another post I have the 210MB filesystem location and the the 320GB LVM2. From my limited understanding it seems the lvm2 location ecompasses the swap and the filesystem but does not explicitly show the swap location and in any event shows the full size of the drive.
once i have backed this core system up so I dont have to worry about ballzing it again how can i strip the installation to a more managable size like to fit on a DVD, im not talking about saving pictures or movies just the base install as thats all i have right now anyway.
View 2 Replies
View Related
Jun 24, 2011
I am running CentOS 5.5 with a 14T ext4 volume. We are sharing out a few sub-directories via NFS. Our customer was doing some penetration testing with our web app that writes to one of those NFS shares. We are not sure if they did something to cause the metadata to grow so large or if it is corrupt. Here is the listing:drwxrwxr-x 1 owner owner 470M Jun 24 18:15 temp.badI guess the metadata could actually be that large, however we have been unable to perform any operations on that directory to determine if the directory is just loaded with files or corrupted. We have not run an fsck on the volume because we would need to schedule downtime for out customers to do so. Has anyone come across this before
View 2 Replies
View Related
Jul 27, 2010
I am dual booting XP and Ubuntu 10.04, but in the future I will be getting a new machine and I will only be running Ubuntu and won't have access to iTunes. Because I have an iPod Touch, I have been trying to find workarounds for syncing everything that iTunes took care of in the past. One problem I have is managing movies. I have looked through various media players/iPod management tools (Amarok, Rhythmbox, gtkpod) and I am using Rhythmbox to sync my music and and attempting to use gtkpod to sync my movies.
gtkpod is able to sync songs (Tested with a few minute test clip) and short *.mp4 files (15mb I know for sure from test). I am unable, however, to get it to sync a movie (~700mb) I am able to drag it onto my iPod in gtkpod, but when I try to save the changes and write the files, it hangs at "Copying Tracks" at 0%. It eventually crashes during the couple times I have tried to wait it out. So this being my situation, my question is, is there a size limit to the *.mp4 files I can sync to my iPod Touch via gtkpod? is there any other tools that you know of that I can sync videos to my iPod with?
View 9 Replies
View Related
Feb 14, 2010
I've discovered that Dolphin seems to lose random files when copying many large folders.
I first noticed this a few months ago when I tried to copy my music library from one folder to another on the same HDD. It consisted of around 600 folders and 6500 files. During the copy there were no errors but after the copy I found that some of the newly copied folders were missing files. I put it down to human error or a glitch.
Yesterday I tried to copy 13 folders containing rips of some of my DVDs. Each folder basically had one film of either 700MB or 1.4GB. Again no errors showed up during the copy but I found 3 of the newly copied folders were empty.
It's not so critical with music or films but I can't afford to lose work data like this.
Has anyone experienced or seen a similar problem with Dolphin? I'm going to have to do some more extensive testing but this is not good.
The first time I noticed the problem I was running KDE4.3.4 (I think) and now the latest was with KDE4.4.0.
View 9 Replies
View Related
Apr 4, 2010
I m having a RHEL-5 sever.ABC directory size is 57GB after taking backup in the same disk with name ABC.bkp showing 56GB. i used below command to copy/backup. # cp -r ABC ABC.bkp (different sizes after copying)..I checked both the directory sizes by #du -sh <ABC> and du -ks <ABC.bkp>In both GB and KB there is lots of difference (200mb). why this will happen in copying? what is the solution for above question? what is the correct way of copying 1dir to newdir exactly?
View 4 Replies
View Related
Nov 12, 2010
i am running ubuntu 10.10 and windows7 on a asus eee 1015. currently i have two partitions: 80GB for windows (NTFS) and 160Gb for Ubuntu (ext4).
I want to:
- shrink the windows partition (easy, no worries);
- Shrink the ubuntu partition
- join the space thus created in a third partition that i can use for storage, media etc accessible by both windows and ubuntu
The problem:
- i could not manage to get gparted live to run off USB stick (i get the unable to find medium.... error)
- even if i would get gparted to work and i succeed in shrinking the ubuntu partition as well, the two spaces reclaimed will be divided by the ubuntu partition, which means they cannot be joined in a third partition.
so here is what i want to do:
- shrink windows and create a new partition;
- format this new partition as ext4;
- somehow "clone" the data on my current ubuntu root into the new partition;
- format the current root as NTFS and use it as the storage partition
i am aware this may mean i would have to re-set grub etc but would the cloning of the partition be possible? that i would need to clone data from a 160G partition into a 40G partition.
BY THE WAY - forgot to mention that i have tried to load clonezilla off an USB drive and i get the same error: "unable to find medium..."
View 3 Replies
View Related
Jul 19, 2010
Linux kernel 2.6, slackware 12.0
KDE 3.5.7
I have some directories whose owner is root. When I enter the GUI (KDE) I always do it as normal user john. But then, when I want to copy a file to some of root's dirs, I get an "Access denied" notification. To be sincere, these dirs are in a window$ vfat partition and I can neither change the ownership nor the permissions. So what I do is to switch to a root console and painstakingly type the whole path of both source and destination, with the help, of course, of tab completion. To su to root, copy the file and exit to john would be much more comfortable. But I don't know how to do it. If I do K Menu>Run Command and type 'su root' nothing happens.
View 6 Replies
View Related
Feb 16, 2010
I tried to move 2.7TB of data from my /var/webroot/ partition (4.5TB total in size). I left it to run over night, this morning when I came to check I saw that all data on / paratition is used up and no operations can be done because of the "no space left on device" message.
Code:
Filesystem Size Used Avail Use% Mounted on
/dev/cciss/c0d0p7 911G 911G 0 100% /
tmpfs 7.9G 0 7.9G 0% /lib/init/rw
[code]....
I freed up several hundred MB from / but still the usage is at 100% and I cant free up any more space or complete the transfer ?
View 1 Replies
View Related
May 8, 2011
How is it possible that I get perm denied when I'm copying files in console.
View 1 Replies
View Related
Jan 28, 2010
When I installed opensuse 11.2 64-bit (KDE) the installer set the root partition to 20GB by default. That seemed unnecessarily large, so I reduced it to 16GB. I then completed the install (basically a default KDE install minus games & educational stuff) and still had more than 8GB free. I'm aware that these days hard drive storage space is quite cheap, but it's not so cheap for me as I have an SSD. Would it not be reasonable to reduce the default root partition size to 12GB, or perhaps vary it according to the software package load selected?
View 3 Replies
View Related
Jun 3, 2010
When I try to copy PDF files from one folder to another folder, it give me this error: "Error while copying "2004-SNUG-Europe-paper_...log_DPI_with_SystemC.pdf". There was an error copying the file into /media/CCDCE66BDCE64F70/Backup Master/Heterogeneous_cosimulation/Documentation" "Error splicing file: Input/output error" What is the reason of this error and how can this be fixed?
View 9 Replies
View Related
Jun 29, 2010
I have a 7.2 GB file (VMWare virtual machine file) that I am trying to copy from its original location to the another folder OR to external hard drive...each time I try to do this, I always get the following error after the copying process reach 'exactly' 1.4 GB
Error reading from file input/output error
And I have to either Cancel or Skip
I've tried to split the files to smaller pieces but the idea didn't work as I still get the same error whenever I try to compress/ split or do any operation with this file. how I can copy this file?
View 2 Replies
View Related
