OpenSUSE Install :: 11.4 (KDE 4) Could Not Mount Root Filesystem
Oct 26, 2010
I am running 11.2, kde4. The day before yesterday, the system updated and I think there was kernal update within that. I had no problems immediately afterward. Then I did a total shutdown for the night, and turned it back on yesterday only to find this:
Mount: wrong fs, bad option, bad superblock on /dev/sda2, missing codepage or helper program, or other error
In some cases useful info is found in syslog--try dmesg | tail or so
Could not mount root filesystem--exiting to /bin/sh
sh: cannot set terminal process group (-1): Inappropriate ioctl for device
sh: no job control in this shell
$
Besides the last updates from the other day, I did nothing out of the ordinary, no downloads or any system/configuration tweeks. Will I have to reinstall opensuse? or is there a way to reclaim my previous setup--or at least reclaim my files and documents? I'm running off of the 11.2 livecd.
View 9 Replies
ADVERTISEMENT
Mar 27, 2010
When I try to boot to OpenSUSE I get the following error during boot-up: unknown filesystem type 'reiserfs' could not mount root filesystem - exiting to /bin/sh$
This only started happening quite recently - before this I could boot to Linux quite happily.
View 6 Replies
View Related
Jun 12, 2011
I have opensuse 11.3 installed, and my motherboard has the intel i845 chipset,
one day windows had enough of the intel graphics chip and would not let me have anything but 640x480 pixels, well you cant do much with that so I put an ati card in and disabled the intenal graphics. windows was happy enough but suse could not boot - more specifically could not mount the root filesystem, saying it had errors (did a very quick fsck), could not find the journal, and I had a bad superblock. the "failsafe kernel" was no better. If I take the ati card out suse boots fine. however I do swap frequently between windows and linux and changing graphics cards between boots is somewhat irritating.
View 3 Replies
View Related
Jan 27, 2010
Have been running 11.1 on a generic notebook (eRacks) just fine until a few days ago when CUPS couldn't be reached. Rather than futz more with 11.1, I decided to install 11.2 (which has been on my desktop). Using the same CD, which continues to check ok, the install has failed many times at about the same point: 87% through "copying root filesystem" in yast2.
Specs: Intel P4 2.4 GHz, 1.5 GB RAM, ATI radeon PV250Lf
The HD was partitioned into /, swap, /home, and an extended partition of /opt, /var, /usr. Only / was ext4 and the rest were ext3. Tried various options:
* no apic
* no acpi
* "noapic acpi=off" entered manually
* Vesa instead of 1024x768
Each time had to edit partition table to mount the extended partitions. Always formatted /. At first didn't format the extended patitions, later formated all but /home. Then set yast2 to format / as ext3, to match the other partitions. In the sysinfo page the / partition is now shown as /mnt containing 723.6 MB out of 7 GB, still formatted as ext4. On rescan by yast2 partition manager, / shows as ext3. The install halts every time with an error while "copying root filesystem." Tried booting from the CD direct to install and to the Live OS followed by install--same result. So, hours later, went back to 11.1--which installed in minutes.
View 4 Replies
View Related
Feb 21, 2010
Formated new drive with ext3 on external drive on Suse 11.1 When upgraded to 11.2, drive was not connected... Could not get mounted after that... Set up another boot drive, could not get to mount. Found post with following:
>cryptsetup luksOpen /dev/sde1 restore
>mkdir /restore
>mount /dev/sde1 /restore
Error as follows: mount: unknown filesystem type 'crypto_LUKS' Have also got to another point where superblock was incorrect. I can use terminal, but am not a linux guru... Have looked at other posts under luks, but can not find a solution.
View 6 Replies
View Related
Feb 15, 2010
I have a dual booting newly installed 64 bit Ubuntu 9.10 on my machine. It was all fine until today. Now when I boot into Ubuntu, I see the error Failed to mount root filesystem. I cant remember any significant changes during the last session. One thing I remember is I upgraded the system using the update manager which asked me to choose an option for grub boot loader. I opted for its upgradation. After the upgrade, I was able to work with Ubuntu for a few more sessions. Windows XP works very fine.I checked other threads which suggested running fsck, but it did not help. fsck does not report any errors.
View 1 Replies
View Related
May 27, 2011
I am using GRUB bootloader. I can boot into windows fine. But booting into linux gives me the error "kernel panic: unable to mount root fs on unknown block(0,0)I got LILO to load linux fine but GRUB always gives me this error regardless of the linux OS for this particular computer.
View 11 Replies
View Related
Jun 27, 2009
I have successful tar an existing CentOS 5.2 partition from Fefora10. The idea is to move a working CentOS 5.2 reside in an internal hard drive to a portable hard drive. I know how to edit a stencil in menu.lst to boot the clone CentOS5.2. During boot, I encountered
Red Hat nash version 5.1.19.6
mount: could not find filesystem /dev/root
setuproot: moving /dev failed No such file or directory
setuproot: mounting /proc: No such file or directory
setuproot: mounting /sys: No such file or directory
[Code]...
View 4 Replies
View Related
Jul 31, 2010
Running F12 on my compaq evo N410c. Did a system restart 4rm gnome logged in as root & now grub cant mount my root filesystem, it boots vista though. How do i rectify dis.
View 2 Replies
View Related
May 5, 2011
I have just tried to update my kernel from 2.6.24.5 to 2.6.39-rc3 on a Slackware 12.1 distribution. I have successfully updated the kernel before, but it was from a newer distribution and newer kernel(Slackware 13.1 and 2.6.33.4). After I updated and rebooted, I got the following error:
Code:
List of all partitions:
0300 4194302 hda driver: ide-cdrom
0800 312571224 sda driver: sd
0801 244197560 sda1 00000000-0000-0000-0000-000000000sda1
0802 68372640 sda2 00000000-0000-0000-0000-000000000sda2
No filesystem could mount root, tried: romfs
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block (8,1)
Pid: 1, comm: swapper Not tainted 2.6.39-rc3-smp #1 .....
View 3 Replies
View Related
May 25, 2010
I am a linux semi-noob who just got the idea that it would be fun to play with Arch Linux.I was dual-booting Windows and OpenSuSE, and I installed Arch by shrinking the Windows partition and putting a new logical partition in between the windows partition and the swap partition I already have.Unfortunately, opensuse still thinks that its root filesystem is on /dev/sda7 so it fails to boot b/c it is looking at an ntfs filesystem that I used for document sharing.If someone has a solution, that will save me from having to reinstall opensuse.
View 5 Replies
View Related
Jan 12, 2010
My Fedora 12 System was failed when booting.The message like that : mount: wrong fs type, bad option, bad superblock on /dev/mapper/my_vol missing codepage or helper program, or other error. In some case, useful info is found in syslog - try dmesg | tail or so Can't mount at root filesystem. [drm: drm_mode_rmfb ] *ERROR* tried to remove a fb that we didn't own. Boot has failed, sleep forever. I guess something wrong with my hard disk, so the bootloader can't recognize the filesystem type.
View 2 Replies
View Related
Apr 12, 2011
I'm trying to boot Emdebian Grip 1.0 built on Compact Flash on a mini PC with grub2 as bootloader. Unfortunately , the booting is unsuccessful and I got stuck into an error message :Code:No filesystem could mount root , tried : minix msdos iso9660kernel panic - not syncing : VFS : Unable to mount root fs on unknown-block (22,1)It seems grub2 hasn't tried to mount ext2 as the filesystem and my Compact flash is formatted as ext2. Here is the menuentry of the grub.cfg :
Code:
menuentry "Debian GNU/Linux, linux 2.66.2.9-custom" {
insmod ext2
[code]...
View 4 Replies
View Related
Jun 17, 2011
I had a LiveUSB of CentOS 5.5, so I decided the install it.With no installer,I just copied the files to my hard drive.his was in a multi boot with Windows 7, Ubuntu 9.10, and FreeDOS.I updated GRUB2 and it detected CentOS. I loaded my entry and it failed to mount the root filesystem.I took the initrd0 file from the LiveUSB syslinux folder and added that ramdisk to the entry. Now it finds the root filesystem (/dev/sda9 as Ext3).But it fails shortly after loading /sbin/init. It talks about an init error where it says "File not found!!!".The previous lines involved umounting old filesystems, like /dev.
View 4 Replies
View Related
May 23, 2010
A friend of mine upgraded his pc to ubuntu 10.04. Sadly enough we ran into issues with his graphics card, which apparently doesnt work well with lucid. We decided to downgrade to 9.10. I did this by installing over the old partition and chose to import the settings from the old account.The problems started when the pc booted for the first time:The list of kernels in grub2 was the one from 10.04.Somehow grub2 from the old installation seems to be still around and messes everything up. Any ideas how I could fix this?
View 6 Replies
View Related
Nov 21, 2010
I decided to try to do the 3 distro upgrade stretch from 8.04 to 10.04 this weekend and now I am hung on 9.04 to 9.10.. The upgrade went swimmingly, but I hit a wall upon boot. When I try to load kernel 2.6.31-22 I am greeted with the following error:
Code:
[ 20.879845] ACPI: I/O resource vt596_smbus [0x400-0$407] conflicts with ACPI region SMOV [0x400-0x406]
Mount of root filesystem failed.
A maintenance shell will now be started ... After doing some digging I found this thread which appears to be similar in the inability to mount the filesystem. However, it does not mention the ACPI error. I tried everything in that thread; verifying device ID's, editing fstab options; running a filesystem check, and flipping the UTC option in the rcS file but nothing worked. The OP of that thread eventually did a fresh install of Karmic; but I would rather not have to go that far.
View 3 Replies
View Related
Jan 9, 2010
I've downloaded Fedora 12 and decided to try and install it on my old laptop which is currently running Ubuntu 9.10 with no problems.
When I boot from the live cd, it starts to load with the 3 bars on the bottom, one on top of the other, one is white, one is dark blue, the other is in between those colours in the spectrum somewhere....
Anyway, the load bars complete and "Fedora 12" turns white, then the following output populates:
mount: unknown filesystem type 'DM_Snapshot_Cow' (<----- repeated a bunch of times) can't mount root filesystem Boot has failed, sleeping forever.
View 9 Replies
View Related
Jun 16, 2010
I've upgraded my squeeze box to linux kernel 2.6.32-5. But it shows mounting "here is the uuid of / " on /root failed: Device or resource busy while booting.Here is the menuentry of linux kernel 2.6.32-5.
[code]....
View 9 Replies
View Related
Dec 28, 2009
I have a non-super user on my box which I'd like to give it MOUNT and UMOUNT permissions but I don't know how.For example purposes, the user name is "USER".I don't want to make it into a SuperUser, just give it rights to be able to issue the MOUNT and UMOUNT commands at the terminal.
View 6 Replies
View Related
Jan 12, 2010
I have a Suse 11.0 Server that has been running for a long time and I have not had to touch it, well I need to get into it today and I forgot the password. So I booted it up with the install disc and got into the rescue mode but I am not sure how or which system to mount to change the root password I tried sda and sda1 but it errored out with unknown system type
View 4 Replies
View Related
Apr 10, 2010
When I installed OpenSuse 11.2 it mounted I configured to mount all of my windows/NTFS partition. However, one problem is that only root can write to it. I was trying to change it to '777' permission. However, as root I can't change permission. chmod doesn't work and neither does using nautilus (as root) work.I even tried unmounting it and then doing a chmod. That didn't work either.
View 1 Replies
View Related
Mar 9, 2010
My computer
AMD phemom II 955 X4 Black Edition 3,2 Ghz
Asus M4A785TD-M EVO micro atx
Kingston 4Gb Ram DDR3 1333 mhz (KVR1333D3N9K2/4G)
Disco Duro Western Digital 1 terabyte
LG GH24 Super Multi DvD rewriter
menu.lst
fstab
fdisk /dev/sda
Orden (m para obtener ayuda):
Bios
I have Sata=AHCI
Sometimes it starts and sometimes not. the RAM is memtest OK. The test detects a firmware in the micro hole 15 to 16 mb of memory. The rest is OK.
View 7 Replies
View Related
Mar 11, 2011
I am trying to mount a file image, like this
mount -o loop /tmp/apps.img /media/apps
But I get the following:
mount: you must specify the filesystem type
I try ext3:
mount -o loop /tmp/apps.img /media/apps -t ext3
dmesg says:
error: can't find ext3 filesystem on dev loop6.
I've also tried ext2, vfat etc. How can I detect the filesystem type of apps.img?
View 2 Replies
View Related
Sep 2, 2010
I recently decided to try out OpenSuSE after a few years of using kubuntu. However, upon lanuching the install disk I get the following kernel panic: "kernel panic-not syncing VFS:unable to mount root fs on unknown-block(3,1)". I am using the 64-bit DVD install and I have verified the md5 of both the download and the disk itself. The specs for my computer are:
Core 2 Q6600
4gb ddr2 RAM
MSI P6N-SLI motherboard
Nvidia GTX 480
View 9 Replies
View Related
May 7, 2011
I have had a dual boot on my system since first trying Ubuntu a few months ago.I had a few problems when i upgraded to 11.04 (mainly due to the new desktop Unity), but after some great help here, we had the old desktop running again.I have Windows running on my spare Computer in case i should need it for any reason, though can not think of one lol Now i am used to Ubuntu (from the using side, get lost in terminal etc so here i come if i need help) i decided i would totally commit my main computer to Ubuntu.I downloaded the latest iso from the Ubuntu site, and burnt it to CD, inserted in my main computer & rebooted. It goes past the first purple ubuntu page (hit a key to choose language & also get a selection Menu) then goes to black screen and i get:
BusyBox v1.17.1 (ubuntu 1:1.17.1-10ubuntu1) built-in shell (ash)Enter 'help' for a list of built-in commands.(initramfs) mount: mounting /dev/loop0 on //silesystem.squashfs failed: Input/output errorCan not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs(hope i typed that i correctly)I have burnt the iso image numerous times, using different disks, speed (from x4 - x52) and burning programs
View 2 Replies
View Related
Dec 21, 2010
My linux distro is CentOS 5.3. Today I edited /etc/sysconfig/readonly-root and set "READONLY" to yes, now my /etc/sysconfig/readonly-root file is like this:
# Set to 'yes' to mount the system filesystems read-only.
READONLY=yes
# Set to 'yes' to mount various temporary state as either tmpfs
[code]...
View 3 Replies
View Related
Mar 12, 2010
I installed Ubuntu Server 9.10 in a virtual machine, and I'm trying to install the VMware Tools but I can't mount the installer CD: $ sudo mount /dev/scd0 /media/cdrom mount: unknown filesystem type 'iso9660'
View 1 Replies
View Related
Jul 19, 2010
I want to mount a serial device. To get do the data section in the device and retrieve image files. Not even root can mount.
Code:
# ls -l /dev/ttyU*
crw-rw---- 1 root uucp 188, 0 Jul 20 13:07 /dev/ttyUSB0
# mount -t fuse /dev/ttyUSB0 /media/M65
/bin/sh: /dev/ttyUSB0: Permission denied
[Code]....
View 9 Replies
View Related
Oct 12, 2010
Since I installed MS2 I messed up grub. Finally I got 11.3 back to its old glory.
What would be the best procedure to create a backup image with all settings and permissions ...just in case ?
View 5 Replies
View Related
Feb 5, 2011
i am having problems with privileges i have created a new user with my name, but i cant get root privileges on it. i need the same privileges as the root profile.
View 9 Replies
View Related
