Alright I've been trying despretly to installed the nvidia drivers.If reinstalled them over and over but it just wont work. I have Gefore GTX 275 and I installed it using the one-click install.
It apperently installs but it doesn't run or something.
I need to install the latest drivers for my Nvidia card. I have the Quadro FX 1800.I don't think the Nvidia One click installation will work with this card.I downloaded the drivers from Nvidia and tried to install them but their directions are very confusing. It says "exit x windows" and "restart in init 3". I don't know what that means.Can someone tell me step-by-step how to compile and install the nvidia drivers?I have opensuse 11.2 64-bit clean install with all the defaults, and the Quadro FX 1800.
View 6 Replies View RelatedI am running openSUSE 11.2 64-bit KDE version. I would like to install drivers for my Nvidia GTX 285 1gb video card. How exactly would I do this?
View 2 Replies View RelatedLappy is a Dell XPS M1330
Intel core 2 T7500 2.2Ghz 4gig Ram
Nvidia GeForce 8400M GS
HDD 320
1 64bit system installs but wont let me do updates so now using 32bit thats ok
2 How do I update drivers? My screen seems to have ghosting around the edges
3 On firefox when scrolling down the page its jerky Ive used firefox on most of my Pcs and never had this problem Im duel booting ubuntu and suse and using the internet on ubuntu so far other than these problems suse is fine
Like a guy earlier today report a problem with Opensuse 11.2 working fine on his machine but 11.3 is not. I have somewhat the same problem. The default installation freezes randomly. I have seen this error before with Intel video cards but never with NVIDIA. Right now, I'm using VESA in failsafe mode and trying to install some drivers from this repo.
I'll try and find a fix for this. (Hope their is one)BTW, can anyone confirm when the official drivers for NVIDIA cards are coming out?
Basically everything was going fine, and i was enjoying the OpenSuse experience, then downloaded djl (Games Launcher) , installed some games and found that i had a very very very bad frame rate (about 1FPS), and my GPU is a NVIDIA GTS250 (1GB), and runs most games flawlessly under m$, so i went about installing the graphics drivers for my card. I followed the instructions and was under the assumption that i installed the correct ones, but now i cannot boot into any graphical interface. I think that it should be a graphics issue, as this was one of the few things done before rebooting. I have tried booting into the normal mode, and the failsafe, I have read many other "Not booting'' posts, and have tried their solutions without success, there include: Changing the boot parameters Logging in and manually trying to boot up the gui (init 3.... init 5... etc)
When the computer tries to load up OpenSuse in normal mode, it comes up with the normal loading screen, and then about 90% of the way it stops for about 30 seconds, and then switches over to a CLI, asking for a login, going through the log a couple of things fail, did have these noted down (but cannot find and will post along with other commands that i am asked to do) I want to try and avoid a reinstall as it took me a long time to get the WiFi card working.
I've recently jump from the Ubuntu/Mint ship, and figured I've give a polished KDE distribution a shot. Of course I turned to OpenSuSE, and I love it so far. I've resisted KDE quite a lot since 4.x came out but it's really come along. Much better than the (in my opinion) monstrous disaster that Gnome has become.
Anyways, on to my problem: I've installed the proprietary Nvidia drivers via the one-click-install shown in the wiki, and that worked great. But now my resolution at boot - that is the boot/loading screen, not my desktop - is shown at a very low resolution instead of my native resolution, like it was with OpenSuSE's default open-source Nvidia driver, which I'm guessing is Nouveau. On Ubuntu, this was pretty easy to correct; all you had to do was edit /etc/default/grub and put your resolution there, and tinker with some other options so that instead of Plymouth trying to set its own, it just carries over Grub's specified resolution. But I can't seem to do that with OpenSuSE. For one, I don't see /etc/default/grub, and more than that, I don't think you guys use Plymouth. I could be wrong on that second point, though. So, how can I change the boot screen's resolution to my native resolution? I'm using the latest Stable release (11.4) and latest Nvidia drivers. Other than that, the install is new.
I have installed openSUSE with Gnome3.
I had to install the nVidia proprietary drives so the OS would boot into Gnome3 and not fail safe mode. Without the proprietary drivers installed the display settings said:
Driver: software rasterizer in use
After installing the nVidia drivers Gnome3 works in one monitor, but I would like to be able to use my other two monitors (totaling three with two video cards.)
When I run nvidia-settings to generate an xorg.conf file it hangs, so I used nvidia-xorgconf to generate the xorg file and then used nvidia-settings to configure my extra screens.
This fails with a permissions error, running sudo nvidia-settings fails with the following error:
ERROR:
So, I ran nvidia-settings, saved the settings file to my /home/$USER dir, then copied xorg.conf to /etc/X11/
Logging out and logging back into Gnome fails with the error:
This problem extends to Ubuntu running Gnome3, so my thinking is:
a) Imma id10t and something in my xorg.conf file is wrong,
b) there is an issue with Gnome3/nVidia/Multiple displays.
I would really like to use Gnome3, it works on multiple other machines (ironically all ATI devices) just not the machine I use all day long...
Here is my xorg.conf file as generated by nvidia-settings.
Code:
I have compiled the proprietary nvidia drivers for 11.3. When I boot, even using the nomodeset boot option, the nouveau module still loads, causing gdm/X to fail. I am able to manually remove the modules with rmmod and restart gdm. Everything then works normally. I have added the line "blacklist nouveau" to both 50-blacklist.conf and 99-local.conf in /etc/modprobe.d
View 7 Replies View RelatedAfter installation of 11.3 I had intermittent hangs and blurred icons.
"My Computer" told me I had a Nvidia GeForce 9100 and a driver called "gallium". That was the problem.
I added "ftp://download.nvidia.com/opensuse/11.3" to my repository and found a new driver to install. That solved my problems. Now my systems are rock solid.
My install of 11.4 (& 12.1) won't load unless I add the X11failsafe option to the loading of 11.4 (& 12.1) in the Grub menu.lst file. They bomb out after resetting the video when booting. I don't need to do this with my 11.3 install. Upon closer inspection 11.3 is using the nouveau nVidia driver, whereas both 11.4 & 12.1 are using the fbdev nVidia driver. My Hardware is a GEForce 6150SE and a Samsung SyncMaster 933SN. I have a couple of questions
1) What do I lose by adding the X11failsafe option in Menu.lst?
2) Can I, should I, replace the fbdev driver with something else. If yes, What? Nouveau?
[URL] I just updated and then saw this news , whats the solution for me, I either want to go beta or downgrade, If i try to boot to previous kernel, boot hangs in graphic mode, I cant start X and gdm . How to install kmod with beta drivers? Or whats the solution, nvidia ver: 195.36.08
[Code]....
opensuse 11.2 ,my monitor keeps going to sleep or somthing and this is a problem when im watching videos,ive set screens power setting but they dont seem to be whats doing it.im running a nvidia gtx260 and have installed nvidia drivers for series 6 and up.dont know if its the divers or somthing else.
View 9 Replies View RelatedI can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
I have Ubuntu 10.10. I want to install the from the nvidia website. The propriatary drivers from Ubuntu aren't great. I have downloaded the file, but what do I do with it now? How can I get it installed?
View 5 Replies View RelatedSo I have been trying to install these drivers forever and after going through a million forum posts and Google searches I have been unsuccessful. The process I have been trying starts as such: I hit ctrl-alt-f1 and then login as root. i then change to run level 3 by doing /sbin/init 3. After that's done I cd to desktop and do sh NVIDIA-LINUX-x86-185.18.29-pkg1.run --kernel-source-path /usr/src/kernel/2.6.18-128.2.1.el15-i686
If I don't give it the source path it can't find the source tree. Eventually I get the error: ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
[Code]...
the url to the nividia drivers for 11.3. They are not yet in the community repos.
View 9 Replies View RelatedI installed Debian 8 on my new computer 3 days ago. Everything went fine, until I tried to install the nvidia non free drivers version 352.21 (for a GTX 970M).I read a lot about that, figuring out I had to add the experimental repo. Here's my sources.list for reference :
Code: Select all# deb cdrom:[Debian GNU/Linux 8.1.0 _Jessie_ - Official amd64 DVD Binary-1 20150606-14:19]/ jessie contrib main
# deb cdrom:[Debian GNU/Linux 8.1.0 _Jessie_ - Official amd64 DVD Binary-1 20150606-14:19]/ jessie main contrib
deb http://ftp.fr.debian.org/debian/ jessie main non-free contrib
deb-src http://ftp.fr.debian.org/debian/ jessie main non-free contrib
[code]....
E: Unable to correct problems, you have held broken packages."but it is not going to be installed" ?I searched on various search engine for this issue with no revelant result..
when i try to install the nvidia drivers with 'yum install kmod-nvidia' its worked before, but now i get this (look at the bottom for where it goes wrong)
[root@localhost Tom]# yum install kmod-nvidia
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list
Setting up Install Process
Resolving Dependencies
[Code].....
I have a desktop installation of Ubuntu 8.10 which has somehow lost parts of it's nvidia drivers. Is there some way, short of reinstalling Ubuntu, that I can completely remove the dregs of my nvidia installation, and then re-install it all afresh ?
View 9 Replies View Relatedteh current version according to Hardware Drivers is 195.36.24 the current one on nvidia's site is 256.53 if there is a way to sue the package manager to get it that would be preferable I know how to install their run files they have
View 5 Replies View RelatedI've got Ubuntu 10.10 and a nVidia 8400GS but when I try to install the newest drivers I get the following error:
ERROR: You appear to be running an X server; please exit X before installing.
I did alot of reading on installing nVIDIA Drivers So far, I did it through the Package Manager. But I got the older 260.* drivers. I downloaded the main drivers from nVIDIA Page. Ran the RUN file. I'm running an Giada PC with ION 9400 IGP. What do you people recommend the best way to install? Custom build? Which I don't know how to. I tried to get vdapu installed as well. But I still get Undefined Rendering in Flash Player. And Boxee plays videos cropped on the left hand side. Right now I have 270.40.16 drivers installed.
View 8 Replies View RelatedJust installed Ubuntu 10.04 on my desktop, inserted a nVIDIA cd in order to install the nVIDIA control panel plus drivers, a CD icon appears on the screen but nothing happens, I have right-clicked the icon and selected open but it show me just a folder with 'bin', autorun.exe' etc. and the cd wont start. Same for other cds.
View 9 Replies View RelatedAfter installing 11.3, I realised that my graphic driver is not working as desired. I have a Compaq CQ60-430SA laptop with an NVIDIA 8200M graphics card. Earlier with 11.2, I had some proprietary NVidia drivers and my graphics were smooth. However, I am not getting the same performance with Nouveau...
As can be seen from the screen clipping below, the images especially in the preview mode and the icons look jarred (highlighted in red). I have no complains with the video but the images and icons do look shabby at times and therefore I want to switch over to the proprietary NVidia drivers.
[URL]
Just got openSuSE 11.3 installed on my system and so far I like it better than my previous distro (Xubuntu).However, under YaST, it's showing a Vendor Driver CD, which I think might be for my nVidia chipset on my Zotac ION motherboard. How do I enable full graphics support for my system?
I Xubuntu, it automatically picked it up and prompted me to use the nVidia drivers. It also added the nVidia PPA to the Software Sources. Does openSuSE have anything like this?
To install the proprietary drivers must be change before the grub?
SDB:NVIDIA drivers - openSUSE
I do not understand where I put the option nomodeset
I looking for a new disto been using ubuntu. my friend recommended Debian, I just installed it and made it unusable very quickly by trying to use repositories for ubuntu. I'd like to know if there is an easy way to make my wireless work like in ubuntu it just does, (i don't even need to attach a cat 5 cable after install), and I'm happy in my blissful ignorance. Also an easy way to install nvidia drivers?
I need Broadcom and nivida 173 drivers. I looked through the Debian forums while I had a working system but found nothing easily and iceweavel was so slow, unless there was something wrong with my wired connection. Is there an easy way to install no free drivers?
I am a real Linux noob lol XD. So sorry if this questions seems a bit easy for some. So here it goes: I want to install NVidia drivers for my laptop and need a compiler to actually install them. I do not have any installed and would like to know how to install gcc, as in the error when i run NVidia driver it says that I need it.
View 9 Replies View RelatedI've been scouring google, using all forms of guides to try and get these damn nvidida drivers installed so I can move my resolution from 800x600 to 1280x1024 (I have a small monitor) I'm running a NVidia GeForce 260 GTX. I've executed yum update I've run rpm - [URL] and everything installed. I've edited grub.conf to disable the default drivers.
[Code]....
