Installed from DVD. Everything looked great until reboot. When the computer tried to reboot, it stalled. I c annot even get tp the setup utility. My computer does not work at all. Obviously I am not happy but if someone has a fix for me.
View 3 Repliesit's my first day of trying to figure out Linux, and I now understand why it's been largely used by the geek community.I've tried to install both xcdroast and 7zip using the console and failed miserably both times.7zip doesn't have a ./configure and xcdroast just gives me errors that I don't understandI think I need a package manager?
View 6 Replies View RelatedI tried to upgrade to v10.04 ("Lucid"). After nearly 15 hours of painfully slow downloading and installing, my computer froze, just as the upgrade was almost complete. Needless to say, my Linux kernel is now wasted. what is the best way to proceed? I would like to get theOS going again, without losing any of my data or files. I also have a Windoze partition on that HD, which needs to be preserved.
View 9 Replies View RelatedI really like qBittorrent.I would really love it if it worked in the unity desktop.There's a few issues with this--
1. No icon in system tray.
2. No access to latest version in software center.
I've looked around in the forums and tried to "whitelist" all apps--I don't know what that means and don't personally understand why ALL apps weren't whitelisted in the first place.That was unsuccessful.
Subprocess failed. Error: RPM failed: installing package xen-4.0.0_21091_06-0.1.1.x86_64 needs 27MB on the /boot filesystemI seem not to be able to change the size of the /boot, but 11.2 loads okay but not 11.3There only 19MB left from 66 and I can't make it bigger, I hope there is someone thathas seen this. I would like to see some of the update with XEN.
View 1 Replies View RelatedToday i upgraded my system and started getting error when i update, install or remove a package. The error isn't restricted only to one repository so i thing something is wrong with my system.
[Code]....
When I try to run the Online Updates to the system through Yast I get the following errors for each package:
[QUOTE]
Subprocess failed. Error: RPM failed: warning: /var/cache/zypp/packages/Packman Repository/Multimedia/i586/libaudcore1-2.4.4-1.pm.1.1.i586.rpm: Header V3 DSA/SHA1 Signature, key ID 9a795806: NOKEY
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
[Code]...
I have installed Ubuntu 10.04 and many applications have changed, including the OpenOffice suite. Unfortunately, the new OpenOffice Wordprocessor is almost unusable. ODT files open slowly (DOC files are almost better!), and the laptop (T5470 Core2Duo!) seems overwhelmed by this application. I cannot format the text, I cannot zoom, it is real madness. I dont understand why. The previous version was OK. Is there any advice? Could I uninstall this version of OpenOffice (3.2) and return to the older one I used in Ubuntu 8.04?
View 2 Replies View Relatedi try to install oci8 for php in suse 10 with this command :
$ cd/opt/oracle -> because the source in this folder
$ pear5 install oci8-1.4.1.tgz
and the result is :
/tmp/glibctestKR4FKZ:1:22: error:feature.h : No such file or directory
10 source files, building
running hpize
Configuring for :
bla...bla...bla
error: 'phpize' failed
what happen with this command? i can not found glibctestKR4FKZ folder in /tmp and 'phpize'.
I am trying to install OpenSuSE 11.2 via network.It is my pxelinux.cfg/default file
default ubuntu
prompt 1
timeout 30
# Install i386 11.2 Suse
[code]....
A network client computer gets ip address from dhcp server, loads initrd and failed on Loading Istallation System stage 4 or 5. If I try to continue installation in manual mode I get an error net_activate: ifconfig eth0 up failed I tryed network cards from different vendors it did not help. Ubuntu linux installs successfully in current environment.
I am using OpenSuSE11.1 very frequently I need to install and update the software and packages.but I am getting this error: Download failed:File '/repodata/repomd.xml' not found on medium URL...
View 3 Replies View RelatedI thought I'd make myself a bash script of sorts to download movie trailers, from a file where I manually dump the URL of each file on a separate line: file 'trailerlist':
[Code]...
I have finally gotten around to installing 11.3 x86_64 on a deskside PC. All went well with the installation until the last package, fetchmsttfonts-11.3-1.1.5-noarch, failed to connect to a server and produced a "Command exited with status 5" error. I have not yet clicked the "OK" button on the error popup. Is there any way to rescue this installation?
I had tried once before, and had clicked the "OK" button before looking things over to see what was the issue since I'd figuredwas nothing that couldn't be sorted out later.However, it aborted the install with the system largely unconfigured. I attempted to fix it but gave up and started a new install from scratch, which failed as described above.I was doing a netinstall, using the oss, non-oss, and update repos.
I would like to avoid having to restart the install yet another time since I do not have the packages cached locally and most certainly do not want to go thru the package selection phase again since I'd picked quite a few additional packges. If I can rescue this one it would be great. If I have to start over, is there a way to import the list of packages from this install into the installer during a hew install
Does anyone know how I can install the following dependencies?
libcrypto.so.0.9.7 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586
libcurl.so.3 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586
libssl.so.0.9.7 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586
I tried through yast with no luck.
I ve succesfully installed 11.2 on my desktop using Gnome (I kept 11.1 on my system) Ive tried to install the KDE using Yast (within Gnome) but halfway the connection failed, after continuing the download the KDE does not have a menubar and I cannot do anything. I only have the KDE splashscreen.
Now (frome gnome) I would like to de/re-install the KDE but I cannot find What i should remove in yast, there is no KDEdesktop option to remove. How can I reinstall the KDE
i'm trying to install OpenSUSE 11.4 on a Macbook Pro 5,1 (later 2008). From boot menu i have chosen all the possible options, but i always get the same result.
I began choosing 1024x768 and standard kernel and i get a black screen. Reboot. I chose VESA and kernel with security adjust. Black screen, then reboot. Finally, i chose VESA and kernel with no-apic and the installation wizard loaded. I configured all and OpenSUSE began to install, but when it was finishing, the screen turned black.
I've posted this question already on opensuse@opensuse.org, however perhapsthat is not the right mailing list, while this forum is dedicated to such questions.And there seems to be much more activity on this forum then on the general mailinglist ---- and I hope to get some answer sooner than later (don't know how to proceed).I ran an update from 11.3 to 11.4, using the 11.4 64-bitDVD, and additionally Internet sources.When it then came to reboot, I got a screen
doing fast reboot
FATAL: Module thermal not found.
FATAL: Module processor not found.
[code]....
I'm trying to run OpenSUSE 11.2 on VirtualBox (ver3.0.8 on Ubuntu 9.10). The installation proceeds without a hitch, but when I try to login, the login manager (kdm?) complains that the login failed. When I go to the console, my login/password do no work there either. I've tried installing OpenSUSE 11.2 three times -- the first two times, it complained about the simplicity of my password -- and all three times I've run into this problem.Have other users encountered a similar problem? It doesn't seem like a VirtualBox-specific issue. Is the /etc/password being changed somehow?
View 5 Replies View RelatedI've recently ran the Updater Applet to install any pertinent official openSUSE updates, but I got 2-3 (they vanished before I could click on them) popups on the bottom right of my screen saying that an update had failed. Additionally, I found the following message in the Updater's lower panel:
Code:
This update fixes an issue caused by a previous
yast2-ncurses update, which would leave some ncurses
(textmode) yast2 tools crashing.
- #569000: yast2-ncurses-2.18.11-0.1.1: crash of yast -i
with a segmentation fault
I ran 11.1 security update today, now the system will not recognize most of my hardware, will not enter X,, how can I recover or revert back? I have hardwired and cannot get the network card to work,,,errors at boot indicate a problem with modules....this all occurred after rebooting from today's update??
View 9 Replies View RelatedI tried most of the methods using a graphical interface to create a live USB through a 64-bit dvd image to install opensuse 11.2 including unetbootin, Win32DiskImager, Mandriva's Seed... Everything failed, so I'm left with the option to do it through the command prompt. There is a dd tool for Windows, and I got the command line instructions in the Live USB page. One thing I don't understand is that how is insert my path of the iso image for this command in Windows: # dd if=/path/to/iso/openSUSE-11.2-KDE4-LiveCD-i686.iso of=/dev/sdX bs=4M;sync; Should I replace the bit # dd if=/path/to/iso/openSUSE-11.2-KDE4-LiveCD-i686.iso, with like something like # dd if= CDownloadsOpensuse11.2x-64.iso?
View 9 Replies View RelatedEarlier this evening I suddenly had hundreds of "Bug Buddy" windows start popping up, which seemed to be stuck in an infinite loop. I rebooted to find myself stuck in run-level 3, due to multiple daemons unable to boot.I cant copy & paste the logs as I have no way to transfer them over to this PC.
Failed services in runlevel 5: earlyxdm xdm avahi-daemon network-remotefs Of course when ever I run 'startx' neither my mouse or keyboard works.I've finally joined the forums, pitty It's because of errors.
I get an error while trying to update the repo.
Index of /repositories/server:/php:/applications/openSUSE_11.1
Code:
│Fehler bei der Initialisierung des Repositorys. ─ │
│ │'openSUSE_11.1_php': [|] Failed to cache repo (4). │ │
│ │Verlauf: │ │
[Code]....
I wanted to install it on a secondary computer in my house for web browsing and little-to-nothing more.
How can I fix or get around the error 'Authentication failed' when attempting to login?
I just installed openSUSE. The installation seemed to go well. After installation, everything loaded up and I was using the OS with no problems.
I restarted the computer to change my boot sequence in the BIOS. Then I got to the openSUSE login screen. I was presented with three options:
1. my username - When I enter in the password I specified during the OS installation it says "Authentication failure"
2. Automatic Login - just says "Permission denied"
3. Other... - Nothing seems to work here
How can I login?
I get the bootchart.tgz file to be created, but I am unable to convert it to a png file. I have tried several instructions on how to make this conversion, but none of them have worked. Here is the one listed on this forum:
after login to GUI open your browser and go to: Bootchart scroll down to Renderer Web Form and upload bootchart log tarball located in /var/log/bootchart.tgz leave PNG format nex press Render chart button. I do not see the location on the website listed, to upload a file.
The other methods I have tried entail using the terminal to convert the file, but I continue to get errors on a failed conversion, or the wrong commands.Is there by chance I do not have a certain software yet installed to make this conversion on my laptop. I have installed the minimal OpenSUSE 11.3.
I've hit a problem with KDE when doing an update. I get an error when logging in:
"call to lnusertemp failed"
I've cleared out the /tmp files, set my tmp files to be deleted on reboot, tried creating a new user, renamed .kde4 to .kde4~old....no luck.
I think that the best solution is to completely remove KDE and then re-install it. How do I do that? Alternatively, if anyone has a better solution, I'll try that.
I've been googling and couldn't find solution to my problem. In the past I was able to get around dual boot with Win XP but that Win 7 seems to be more resistant to dual boot. I have a Toshiba Portege T110 that came with Win 7 home edition. I parted the hdd using gparted and put Linux on extended partition. It was OK up till then. After installing Opensuse 11.3 and installing Grub in extended partition, grub came up but when I chose windows, I got error from windows boot manager saying it couldn't find winload.exe. I tried to manipulate the grub by typing:
rootnoverify (hd0,1)
makeactive
chainloader +1
boot
That didn't work at all. So I reinstalled Win 7. After Win 7 back up, I again tried to fix grub by doing this:
find /boot/grub/menu.lst (this gives hd0,5)
root (hd0,5)
setup(hd0)
quit
After rebooting, grub came back but when I tried to access win 7, I again got the black screen saying my winload.exe is missing. I'm reinstalling my win 7 for the 2nd time now. But I'd still like to get the dual boot with Opensuse 11.3 to work. What have I done wrong? Should I put grub in MBR or the mount point / ? or should it be left alone in extended partition? And how do I move grub to different place?
I installed OpenSuSE 11.2 64bit from a Linux Magazine #111 dvd and now cannot create DomU guests. The exact error is in the subject line. It is sitting on a software RAID-1 partionion on two (mirrored) hard disks. When I first install - formatting all partitions - it reports error 17 and won't load the OS. After running the Repair installed system from the DVD I get the impression it is doing things twice rather than doing the repairs once on the RAIDed partition. Should I go back to 11.1?
View 4 Replies View RelatedI installed from a live CD when it came to selecting the partition I re-sized the partition that Ubuntu was on because it was 68 gigs I shaved off 15 gigs for SUSE. Then I selected this new 15gig partition to install SUSE on, everything went fine with the installation I was tinkering around on SUSE but of course I needed internet access, so I go to get on Ubuntu where I had my file with my network key. I restarted expecting to see the usual GRUB boot-loader screen only now with an added option for SUSE. Instead I see an entirely new layout for the GRUB boot loader and all that is listed is SUSE, Failsafe SUSE, Windows XP, and Floppy. The Windows is my XP install and it loads fine sadly it is actually what I'm using now because it is the only thing left that I have my network key saved so I can get on this forum.
Looking on SUSE I notice that the 50gig partition formerly known as Ubuntu still exists I figure no problem add the partition back on to the boot-loader and I'm good to go. Added it and when I select to load it nothing happens it starts to then reverts back to the OS list. Does anyone A) Know how to resolve this or have any ideas. B) Think I can at least copy files off that 50 gig partition to an external hard drive.
Using 11.0 64bit OpenSuse. I was updating this workstation. Everything was working good. I rebooted from the last set of updates and now I am trying to access the Package Manager from yast, but it is not working now. It starts up, then it goes to an "Initializing", then a popup says that "Accessing the Package Manager Failed". It also notes that something else is using the package manager, then gives me choice to either continue or retry.
View 3 Replies View Related