OpenSUSE Install :: Failed Attempt At Triple Booting
Apr 6, 2010
I installed from a live CD when it came to selecting the partition I re-sized the partition that Ubuntu was on because it was 68 gigs I shaved off 15 gigs for SUSE. Then I selected this new 15gig partition to install SUSE on, everything went fine with the installation I was tinkering around on SUSE but of course I needed internet access, so I go to get on Ubuntu where I had my file with my network key. I restarted expecting to see the usual GRUB boot-loader screen only now with an added option for SUSE. Instead I see an entirely new layout for the GRUB boot loader and all that is listed is SUSE, Failsafe SUSE, Windows XP, and Floppy. The Windows is my XP install and it loads fine sadly it is actually what I'm using now because it is the only thing left that I have my network key saved so I can get on this forum.
Looking on SUSE I notice that the 50gig partition formerly known as Ubuntu still exists I figure no problem add the partition back on to the boot-loader and I'm good to go. Added it and when I select to load it nothing happens it starts to then reverts back to the OS list. Does anyone A) Know how to resolve this or have any ideas. B) Think I can at least copy files off that 50 gig partition to an external hard drive.
I am having problems with triple booting my system. The original Linux OS I started out with was Ubuntu, which I was able to triple boot in the desired configuration (Mac OSX, Unbuntu, and Windows XP) after several tries (the instructions I got weren't quite right). I am now trying to install openSUSE instead of Ubuntu. However, if I install openSUSE before Windows XP, Windows XP erases my installation. If I install it afterwards, it seems to erase Windows XP, as it becomes unbootable thereafter. Perhaps this is because I am following the instructions for installing Ubuntu (format partition 3 as Ext3, mount it as /, and install the grub boot loader inside that partition), without modifying much else. I can't seem to find any good instructions online to tell me what else to do.
the instructions on installing Ubuntu screwed up because it said I had to install Windows XP first, before installing Ubuntu. I found out it was the other way around. Also, while Ubuntu was installed, all three partitions showed up on disk utility (although the Linux partition wasn't a recognized file system). However, every time I've installed openSUSE, where the partition should have been showed up as empty space on disk utility.
I think the installation caused the corruption of the partition table. I removed the last 3 logical partitions and gparted correctly reported the 2 remaining distros and the swap. The problem hopefully will be solved when I reinstall those distros. I have a 160 gig HD with 3 Linux,1 swap,and a Windows partition. I attempted to install PCLINUXOS unsuccessfully. When I rebooted I had the same grub. I checked gparted and it indicated all 160 gigs as unallocated. fdisk shows the partitions. and indicates one partition as empty where I attempted to install PCLOS.
No problem in accessing any of my distros, but currently I can't make any changes to my HD. I've tried parted magic and there was no solution there. I have been unable to download the Ubuntu Rescue remix. Is there a way to restore? I haven't used fdisk or cfdisk for that purpose. I am beginning to think I would need to delete all of the partitions in the extended. FDISK omitting empty partition (8)
I have an Acer Aspire One, Model PAV70 that had Windows 7 Starter on it. I booted Ubuntu 10.10 from a USB HDD and then formatted the Acer drive with Ubuntu. I then started installing Ubuntu on the newly formatted HDD and got an error near the end of the install. It said, "apt configuration problem, an attempt to configure apt to install additional packages from the cd failed." After this happened the system locked up and I had to reboot. Now I get a black screen with a white blinking cursor. I can't get the system to recognize anything. What can I do?
CPU Type: Intel(R) Atom(TM) CPU N450 CPU Speed: 1.66GHz System BIOS Version: V3.05(DDR2) VGA BIOS Version: Intel V2001
I had a failed attempt at an upgrade to 10.04 but I know the error of my ways however before I go through it again does 10.04 still have the tools available for a dial-up connection, wvdial & gnome ppp?
I followed blindly this how to : [URl].. out of laziness and then for some reason bind9 didn't want to start. So I tried to apt-get remove it, but when I re-install it, it failed because
Code: chgrp: cannot access `/etc/bind/named.conf*': No such file or directory so I assume the chrooting stuff I did is in the way, but I know very little about chrooting and permissions ... how can I undo the following things I did : Code: /etc/init.d/bind9 stop
If you attempt to install VLC by simply adding the VideoLAN repository to YAST, the version that's installed won't have audio.Follow the Zypper instructions on the VideoLAN website (bottom of the page)VideoLAN - VLC media player for openSUSE Be sure to specify 11.3 as described, and VLC will install fine.
I'm trying to get a triple-boot setup working with rEFIt and OSX 10.6.5/Win7/Ubuntu 10.10. I'm finally to a point where rEFIt shows a OS X, Windows, and Linux option but the Linux item boots up windows. I just finished booting the live CD and installing grub on the ubuntu partition, but rEFIt is *still* booting windows with the Linux menu entry (and no new entries have appeared since the GRUB reinstall).
Here's what the rEFIt partition inspector is currently showing - can anyone spot any problems? Note: Currently I have 5 partitions (OS X @ 60GB, Win @ 120 GB, Ubuntu (swap) @ 2 GB, Ubuntu @ 58 GB, and a general storage partition (formatted in OS X's HFS).
Code: Report for internal hard disk
Current GPT partition table: # Start LBA End LBA Type 1 40 409639 EFI System (FAT) 2 409640 117597143 Mac OS X HFS+
I have an Intel iMac that has about 500 GB of unused space and I was wanting to install Ubuntu or Ubuntu studio or any Linux distro on about an extra 50 - 100 GB of space. I currently have the iMac with a windows bootcamp partition on it as well. Is it too late to partition the main partition and install Ubuntu on it without having to erase it and reinstall the Mac OS and Windows on it? Also, I wanted to try Ubuntu studio on a live CD, but when I hold C and bring up the preboot environment then I don't see an option to "try Ubuntu without changing anything".
Im trying to install Backtrack 4, XBMC live, and ultimate boot cd onto a 4gb usb flash drive and im wondering if my partition layout is acceptable for doing what i want to do, and im wondering how to install them to usb correctly (unetbootin doesnt work)
partition layout 100mb for boot 2.5gb for backtrack 4 700mb for UBCD 700mb for XBMC live
how do i install grub, or another boot loader that will read the adjacent partitions and boot them no matter what pc im on?
I Currently have Windows 7 and Ubuntu 10.10 on dual boot system, but I want to change that. I want Win 7, openSuse 11.3 and Ubuntu 10.10 on a triple Boot. I have a 500gb sata hdd. The Rough Plan was to 150gb for Win7, 150 for openSuse 11.3 (50gb for / and 100gb for /home) and same again for Ubuntu 10.10 and 50gb for Swap. I am using entire drive for 3 Operating Systems and Swap. I have read a few guides and they all say install win7 then opensuse then ubuntu, and thats fine but none say anything about partitioning. And one main problem is cant split into more than 4 different partitions.
I would like to install Opensuse 11.4 on my macbook pro to do a triple boot. I found lots of tutorial on Ubuntu but not on Opensuse, and this facility is the same way?
I keep getting hundreds of SSH failed logins per day. Is there a way with iptables, i can say if a user connects too to port 22 over 8 times in 10 minuntes, then block them for an hour?
When I try 'makebootdisk' and get to the 'format' stage, it tells me: "The attempt to format the floppy disk in /dev/fd0 has failed ..." The disk is fine, and can be read from, but the above msg. shows up instantly -- the light on the drive doesn't even come on. I'd expect this to be a routine problem but I can't find any solutions either here or on the web.
I'm a former Ubuntu user who jumped ship to Linux Mint. I currently am dual booting Windows 7 and Linux Mint 11 using Grub 2. Is there a way to install Fedora last? Much of the reading I have done suggests Fedora needs to be installed before Mint/Ubuntu. By the way, I have searched the forums and it has been suggested to wipe out Ubuntu, install Fedora and then re-install Ubuntu. I would much rather shrink the Windows partition and install Fedora before Mint and update Grub.
My laptop had Vista, I installed Lucid so I'm dualbooting with GRUB, and I'm wondering if anybody knows of a way to triple-boot with Mac OSX. Thanks in advance.
I would like to triple boot my Macbook Pro. I don't want to use rEFIt. Although it worked on my iMac, it would randomly not load the OS's sometimes.
1. Is there a way to use Boot Camp?
2. I know how to use Mac with the windows xp bootloader. How can i put Ubuntu in too? I got this thing about taking 512 megabytes of the bootloader grub or something like that but I don't get it.
I'm triple booting (windows, ubuntu and osx86) at the moment but in order to load OSX86, I need to pass "cpus=1" to the kernel otherwise it won't load and the PC just reboots. Can I pass this argument from grub or do I have to install osx to a separate hdd and get grub to load the Darwin bootloader on the second hdd and then pass the argument?
I'm trying to install (k)Ubuntu 10.04 side-by-side via Wubi, so that I can triple-boot Windows with the GNOME and KDE flavors of Ubuntu. Is there a way to install an OS to another folder?
This is my first post to this forum! I'm just getting into openSUSE and really excited to get involved in it. I have a MacBook running OS X 10.6 (Snow Leopard) that I triple booted using Disk Utility. I installed openSUSE, (not WFindows yet), and have it set up to load using reFIT. reFIT can see that openSUSE is installed, but when I choose to load it it displays the following error message:
"No bootable device -- insert boot disk and press any key" I have the feeling there is something very simple I'm doing wrong I know this post isn't extremely detailed to please let me know whatever other information I should provide.
I learned that, even while on Linux, using Iceweasel/Firefox 3.0.6 is not safe. So I tried to update the browser for my PPC G4 iMac (256 MB RAM, 800 MHz processor).
1. I downloaded a backported Iceweasel .deb from URL...
2. I then tried to install it with dpkg -i PathToIceweasel.deb
3. There was an error. I remember seeing xulrunner-1.9.1 is not installed. I tried to install that with apt-get but it was not available.
4. Now when I click on web browser I get the error "Failed to execute default Web Browser: Input/Output error".
I made an attempt to backup my system (karmic koala) using this routine. cd / then sudo tar cvpzf backup.tgz --exclude=/proc --exclude=/lost+found --exclude=/backup.tgz --exclude=/mnt --exclude=/sys /
The process of backup went on for a very long time, which is probably normal. On returning to the computer in the morning, it was in suspend mode and would not power on via the usual method,tapping power button. So then I used the reset button, and after booting up a message appears on the top right that reports "Install problem! The configuration defaults for GNOME Power Manager have not been installed correctly. Please contact your computer administrator."
Is there something wrong with the statement that was used for backing up the system? Also when I attempt to login it does not work now either, it eventually returns to the login user selection. So is there a possibility the backup finished and then there may be a chance the system can be restored from the backup file? I have tried booting up with a live cd and could use some advice on how to navigate with terminal to root of the system and see if the backup file exist even, have been unable to get to the root folder(where the backup would be) with the GUI method via live cd.
My buddy has a computer with a problem and hes asked me to see if I can retrieve the data documents from the computer. The subject computer is a COMPAQ PRESARIO SR5030NX with a Pentium 4 cpu, 3.2 GHz, 1 GB RAM, running Windows Vista Home Basic.
His goal was to create a dual boot computer UBUNTU and Vista. What he did was to install UBUNTU, partitioning the computer in two partitions. The computer is now giving an error code of 21 when GRUB Loader starts up. Is there a restore disk or some kind of utility that can undo what was done to the computer. He has no backup disk.
I tried Recovery Commander Ver. 3 made by Avanquest but as their website indicates it�s for XP. They never updated it for Vista and Windows 7. Is there a utility that can undo some of the changes that were made to the machine when UBUNTU was installed, albeit, unsuccessfully.
(1) I have an HP PC running XP professional and I was wondering if I take the hard drive out from the COMPAQ and rig it to my HP via a SATA/IDE to USB 2.0 Adapter device would I be able to see the contents of that COMPAQ computer that had Vista and now UBUNTU.
(2)What about attaching the COMPAQ internal hard drive and attaching it to my HP as a slave drive.
(3)Can the UBUNTU disk going to help?
Were just after the data files and not software programs.
I've searched lot on forums but couldn't find a related post. My problem is I want to hide my mail folders when login attempt in Evolution has failed. I dont use Remember password option so everytime I'm prompted for password.
When I give no password and escape that dialog, I can see all the mails that have been already downloaded form my gmail account. If any of you guys know already existing post, please redirect me to that one.
I will like to triple boot Ubuntu, XP and Windows 7, but I already had Ubuntu and XP running on separate HDDs, Ubuntu was installed first, then I installed XP on a separate HDD (with the Ubuntu HDD disconnected), now I did the same for Windows 7, I disconnected all other HDDs (Ubuntu, XP and Data)and installed windows 7 on a separate HDD.When I connected everything back(Ubuntu HDD, XP, Data HDDs and Windows 7 HDD, Windows 7 does not appear on grub boot menu and now Windows 7 does not boot up by it self.
Is there a way to simply add Windows 7 to Grub so I can have all 3 OS's on grub menu?Can grub search HDDs to look for OSs to add to the menu?Funny thing is the XP entry on grub appeared by it self, I've never edited grub to add XP on the booting menu, I was booting directly to XP by going into the BIOS and selecting the XP HDD as my booting drive instead of Ubuntu HDD, somehow XP was added to the grub booting menu.
Hey there. Currently my Toshiba laptop is dual-booted with windows 7 and Ubuntu 10.10 and I think I may try and triple-boot it with Snow Leopard. I'm not too familiar at all with hackintoshes so, how should I go about configuring a partition for the OS?
Also: is there any known problems running windows and a mackintosh OS?
If someone can give me some insight here I can also provide my computer's specs.
A few minutes ago I was using google chrome when suddenly the scroll-lock indicator on my keyboard turned on... I pressed the scroll-lock key, but nothing happened, the light remained. I opened a terminal and ran "top" to find what processes were running when I was automatically logged out. I logged back and checked the logs and found the following entries in my auth.log:
Code: CRON[2971]: pam_unix(cron:session): session opened for user root by (uid=0) CRON[2971]: pam_unix(cron:session): session closed for user root
