OpenSUSE Install :: Failed Bootchart Tgz To Png Conversion
Nov 3, 2010
I get the bootchart.tgz file to be created, but I am unable to convert it to a png file. I have tried several instructions on how to make this conversion, but none of them have worked. Here is the one listed on this forum:
after login to GUI open your browser and go to: Bootchart scroll down to Renderer Web Form and upload bootchart log tarball located in /var/log/bootchart.tgz leave PNG format nex press Render chart button. I do not see the location on the website listed, to upload a file.
The other methods I have tried entail using the terminal to convert the file, but I continue to get errors on a failed conversion, or the wrong commands.Is there by chance I do not have a certain software yet installed to make this conversion on my laptop. I have installed the minimal OpenSUSE 11.3.
View 9 Replies
ADVERTISEMENT
Nov 22, 2009
I did a kernel upgrade in openSUSE 11.2 which caused bootchart to fill the root partition or so it would appear as when I rebooted I started getting messages on the console saying bootchartd could not write because the device was full.
Let me begin by describing my system:
Partition table:
fdisk -l /dev/sda
Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00083a53
Device Boot Start End Blocks Id System
/dev/sda1 1 2612 20980858+ 7 HPFS/NTFS
/dev/sda2 2613 15666 104856255 7 HPFS/NTFS
/dev/sda3 * 15667 15927 2096482+ 83 Linux
code....
As you can see from the partition table I have 2GB allocated for the / partition and according to the df command there is 0 free space but du -hx shows / is only using 405MB. What's happened to the almost 1.6GB that should be available?
View 2 Replies
View Related
Jun 19, 2011
I am using apache pdfbox box 1.5 with openjdk i.6.0_0 on opensuse 11.4 32-bit (minimal install, as provided by amazon ec2). The problem is that when I use the apache pdfbox tool to convert a pdf to an image the image is blank. I am using the exact same application on opensuse 11.2 (default install from opensuse 11.2 dvd) with no problems. I suspect there are issues caused by uninstalled packages. I installed several font packages and Image manipulation packages with no success.
View 2 Replies
View Related
Dec 29, 2010
I had some success with handrake to rip dvd's in older versions of ubuntu. i now have a clean install of 10.10 and know that handbrake is not compatible (even tried the ppa of the nighly builds without success). In looking for alternatives, i cam across arista transcoder....which seems perfect for my needs (simple), but whenever i put a dvd in the queue its gives me an error that says conversion failed....no valid dvd title found. this happens no matter what dvd i use and no matter what preset i choose.
View 2 Replies
View Related
Oct 14, 2010
Subprocess failed. Error: RPM failed: installing package xen-4.0.0_21091_06-0.1.1.x86_64 needs 27MB on the /boot filesystemI seem not to be able to change the size of the /boot, but 11.2 loads okay but not 11.3There only 19MB left from 66 and I can't make it bigger, I hope there is someone thathas seen this. I would like to see some of the update with XEN.
View 1 Replies
View Related
Apr 9, 2010
Today i upgraded my system and started getting error when i update, install or remove a package. The error isn't restricted only to one repository so i thing something is wrong with my system.
[Code]....
View 4 Replies
View Related
Mar 5, 2011
When I try to run the Online Updates to the system through Yast I get the following errors for each package:
[QUOTE]
Subprocess failed. Error: RPM failed: warning: /var/cache/zypp/packages/Packman Repository/Multimedia/i586/libaudcore1-2.4.4-1.pm.1.1.i586.rpm: Header V3 DSA/SHA1 Signature, key ID 9a795806: NOKEY
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
[Code]...
View 3 Replies
View Related
Feb 8, 2010
I have OpenSUSE 11.2. I removed bootchart and forgot to run mkinitrd. Now, right at the start of the boot process, I get boot/93-bootchart.sh: line 17: 462 Terminated stopinitrd 5
I Can't find any 93-bootchart.sh anywhere. Earlier I got an error message about non existing /sbin/bootchartd, but I just copied /bin/cat to /sbin/bootchartd using a GParted boot disk. I tried to use chroot with an OpenSUSE boot disk, but mkinitrd can't find the root device, which is there actually (/dev/sda5). How can I make my system boot again? now I managed to re-install the bootchart rpm, using OpenSUSE boot disk and chmod. The system starts again. But that annoying bootchart is still there. I will not try again to remove it. First I will try to figure out, how to disable it during the boot process.
View 1 Replies
View Related
Mar 23, 2011
I need a utility to convert a non-copyprotected dvd to an mpeg file. Where can I find one? Something I can send via email.
View 9 Replies
View Related
May 19, 2010
My Friend and I have a similar spec PC apart from mine has 4GB DDR2 his 2GB DDR2 and Mine quad core 2.3Ghz and his Dual core 2.3Ghz.... Both on a fresh 10.04 install with Grub2
Bootchart beats mine by about 10sec why?[Files Attached]
Edit files here: (Attached got resized)
Mine : [URL]
Friend : [URL]
View 9 Replies
View Related
Jun 6, 2011
I have some downloaded files of radio programme from BBC which are .aac. I have never come across this type before. Googled it so now I am a bit wiser and VLC seems to play them without problem but they are not accepted by my upnp client devices which are happier with flac or mp3. I would prefer flac but what is the preferred conversion software.
View 3 Replies
View Related
Jun 30, 2010
The thing I love most about 10.04 has been the boot times. Now, sadly that is gone for me... Suddenly it takes longer to boot. With almost no new apps installed and I have a separate disk for music/videos and such. Also, removed most of startup-applications!
Before, when the ubuntu logo showed the dots didn't even complete a whole lap, and...I was in the desktop... Now it does a couple rounds before eventually getting to the desktop.
Nothing extremely slow, but still noticable!..
Created a bootchart, but i couldn't see anything extraordinary.. maybe you guys can?
BOOTCHART RESULTS
View 1 Replies
View Related
Feb 16, 2010
i try to install oci8 for php in suse 10 with this command :
$ cd/opt/oracle -> because the source in this folder
$ pear5 install oci8-1.4.1.tgz
and the result is :
/tmp/glibctestKR4FKZ:1:22: error:feature.h : No such file or directory
10 source files, building
running hpize
Configuring for :
bla...bla...bla
error: 'phpize' failed
what happen with this command? i can not found glibctestKR4FKZ folder in /tmp and 'phpize'.
View 1 Replies
View Related
Mar 2, 2010
I am trying to install OpenSuSE 11.2 via network.It is my pxelinux.cfg/default file
default ubuntu
prompt 1
timeout 30
# Install i386 11.2 Suse
[code]....
A network client computer gets ip address from dhcp server, loads initrd and failed on Loading Istallation System stage 4 or 5. If I try to continue installation in manual mode I get an error net_activate: ifconfig eth0 up failed I tryed network cards from different vendors it did not help. Ubuntu linux installs successfully in current environment.
View 3 Replies
View Related
Feb 21, 2011
I am using OpenSuSE11.1 very frequently I need to install and update the software and packages.but I am getting this error: Download failed:File '/repodata/repomd.xml' not found on medium URL...
View 3 Replies
View Related
Jan 21, 2011
I have finally gotten around to installing 11.3 x86_64 on a deskside PC. All went well with the installation until the last package, fetchmsttfonts-11.3-1.1.5-noarch, failed to connect to a server and produced a "Command exited with status 5" error. I have not yet clicked the "OK" button on the error popup. Is there any way to rescue this installation?
I had tried once before, and had clicked the "OK" button before looking things over to see what was the issue since I'd figuredwas nothing that couldn't be sorted out later.However, it aborted the install with the system largely unconfigured. I attempted to fix it but gave up and started a new install from scratch, which failed as described above.I was doing a netinstall, using the oss, non-oss, and update repos.
I would like to avoid having to restart the install yet another time since I do not have the packages cached locally and most certainly do not want to go thru the package selection phase again since I'd picked quite a few additional packges. If I can rescue this one it would be great. If I have to start over, is there a way to import the list of packages from this install into the installer during a hew install
View 7 Replies
View Related
May 15, 2011
OS: Opensuse 11.4 Webcam: Bus 002 Device 002: ID 046d:08ac Logitech, Inc. QuickCam Cool Error Message: libv4l2: error allocating conversion buffer. The quality of my webcam output is very poor. I am uncertain as to what I can do to re
View 2 Replies
View Related
Oct 25, 2010
Does anyone know how I can install the following dependencies?
libcrypto.so.0.9.7 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586
libcurl.so.3 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586
libssl.so.0.9.7 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586
I tried through yast with no luck.
View 2 Replies
View Related
Mar 9, 2010
Installed from DVD. Everything looked great until reboot. When the computer tried to reboot, it stalled. I c annot even get tp the setup utility. My computer does not work at all. Obviously I am not happy but if someone has a fix for me.
View 3 Replies
View Related
Jun 5, 2010
I ve succesfully installed 11.2 on my desktop using Gnome (I kept 11.1 on my system) Ive tried to install the KDE using Yast (within Gnome) but halfway the connection failed, after continuing the download the KDE does not have a menubar and I cannot do anything. I only have the KDE splashscreen.
Now (frome gnome) I would like to de/re-install the KDE but I cannot find What i should remove in yast, there is no KDEdesktop option to remove. How can I reinstall the KDE
View 3 Replies
View Related
Mar 14, 2011
i'm trying to install OpenSUSE 11.4 on a Macbook Pro 5,1 (later 2008). From boot menu i have chosen all the possible options, but i always get the same result.
I began choosing 1024x768 and standard kernel and i get a black screen. Reboot. I chose VESA and kernel with security adjust. Black screen, then reboot. Finally, i chose VESA and kernel with no-apic and the installation wizard loaded. I configured all and OpenSUSE began to install, but when it was finishing, the screen turned black.
View 5 Replies
View Related
Jul 11, 2011
I've posted this question already on opensuse@opensuse.org, however perhapsthat is not the right mailing list, while this forum is dedicated to such questions.And there seems to be much more activity on this forum then on the general mailinglist ---- and I hope to get some answer sooner than later (don't know how to proceed).I ran an update from 11.3 to 11.4, using the 11.4 64-bitDVD, and additionally Internet sources.When it then came to reboot, I got a screen
doing fast reboot
FATAL: Module thermal not found.
FATAL: Module processor not found.
[code]....
View 9 Replies
View Related
Nov 13, 2009
I'm trying to run OpenSUSE 11.2 on VirtualBox (ver3.0.8 on Ubuntu 9.10). The installation proceeds without a hitch, but when I try to login, the login manager (kdm?) complains that the login failed. When I go to the console, my login/password do no work there either. I've tried installing OpenSUSE 11.2 three times -- the first two times, it complained about the simplicity of my password -- and all three times I've run into this problem.Have other users encountered a similar problem? It doesn't seem like a VirtualBox-specific issue. Is the /etc/password being changed somehow?
View 5 Replies
View Related
Jan 22, 2010
I've recently ran the Updater Applet to install any pertinent official openSUSE updates, but I got 2-3 (they vanished before I could click on them) popups on the bottom right of my screen saying that an update had failed. Additionally, I found the following message in the Updater's lower panel:
Code:
This update fixes an issue caused by a previous
yast2-ncurses update, which would leave some ncurses
(textmode) yast2 tools crashing.
- #569000: yast2-ncurses-2.18.11-0.1.1: crash of yast -i
with a segmentation fault
View 3 Replies
View Related
Mar 3, 2010
I ran 11.1 security update today, now the system will not recognize most of my hardware, will not enter X,, how can I recover or revert back? I have hardwired and cannot get the network card to work,,,errors at boot indicate a problem with modules....this all occurred after rebooting from today's update??
View 9 Replies
View Related
Mar 18, 2010
I tried most of the methods using a graphical interface to create a live USB through a 64-bit dvd image to install opensuse 11.2 including unetbootin, Win32DiskImager, Mandriva's Seed... Everything failed, so I'm left with the option to do it through the command prompt. There is a dd tool for Windows, and I got the command line instructions in the Live USB page. One thing I don't understand is that how is insert my path of the iso image for this command in Windows: # dd if=/path/to/iso/openSUSE-11.2-KDE4-LiveCD-i686.iso of=/dev/sdX bs=4M;sync; Should I replace the bit # dd if=/path/to/iso/openSUSE-11.2-KDE4-LiveCD-i686.iso, with like something like # dd if= CDownloadsOpensuse11.2x-64.iso?
View 9 Replies
View Related
Mar 21, 2010
Earlier this evening I suddenly had hundreds of "Bug Buddy" windows start popping up, which seemed to be stuck in an infinite loop. I rebooted to find myself stuck in run-level 3, due to multiple daemons unable to boot.I cant copy & paste the logs as I have no way to transfer them over to this PC.
Failed services in runlevel 5: earlyxdm xdm avahi-daemon network-remotefs Of course when ever I run 'startx' neither my mouse or keyboard works.I've finally joined the forums, pitty It's because of errors.
View 9 Replies
View Related
Apr 23, 2010
I get an error while trying to update the repo.
Index of /repositories/server:/php:/applications/openSUSE_11.1
Code:
│Fehler bei der Initialisierung des Repositorys. ─ │
│ │'openSUSE_11.1_php': [|] Failed to cache repo (4). │ │
│ │Verlauf: │ │
[Code]....
View 1 Replies
View Related
Jun 3, 2010
I wanted to install it on a secondary computer in my house for web browsing and little-to-nothing more.
How can I fix or get around the error 'Authentication failed' when attempting to login?
I just installed openSUSE. The installation seemed to go well. After installation, everything loaded up and I was using the OS with no problems.
I restarted the computer to change my boot sequence in the BIOS. Then I got to the openSUSE login screen. I was presented with three options:
1. my username - When I enter in the password I specified during the OS installation it says "Authentication failure"
2. Automatic Login - just says "Permission denied"
3. Other... - Nothing seems to work here
How can I login?
View 8 Replies
View Related
Dec 11, 2010
I've hit a problem with KDE when doing an update. I get an error when logging in:
"call to lnusertemp failed"
I've cleared out the /tmp files, set my tmp files to be deleted on reboot, tried creating a new user, renamed .kde4 to .kde4~old....no luck.
I think that the best solution is to completely remove KDE and then re-install it. How do I do that? Alternatively, if anyone has a better solution, I'll try that.
View 2 Replies
View Related
