I've hit a problem with KDE when doing an update. I get an error when logging in:
"call to lnusertemp failed"
I've cleared out the /tmp files, set my tmp files to be deleted on reboot, tried creating a new user, renamed .kde4 to .kde4~old....no luck.
I think that the best solution is to completely remove KDE and then re-install it. How do I do that? Alternatively, if anyone has a better solution, I'll try that.
opensuse 11.1 64 bit NVIDIA 180.22 yesterday i update my kde from 4.13 to 4.2. Before i install kde 4.2 ,i disable all repo about 4.13 and remove kde 4.13 .using one-click installer,i install kde 4.2 successfully.but i can not login my account in kde session. it says "call to lnusertemp faild (temporary directories full?)..."
use command
df /tmp
df -i /tmp
df /var/tmp
df -i /var/tmp
i found my disk have enough space,about 70% free space. i try to lonin use root account .it failed too ,with same error. any one know what is the matter about my kde 4.2?
opensuse 11.1 64 bit NVIDIA 180.22
yesterday i update my kde from 4.13 to 4.2.
Before i install kde 4.2 ,i disable all repo about 4.13
and remove kde 4.13 .using one-click installer,i install kde 4.2 successfully.but i can not login my account in kde session .it says
"call to lnusertemp faild (temporary directories full?)..."
use command
df /tmp
df -i /tmp
df /var/tmp
df -i /var/tmp
i found my disk have enough space,about 70% free space.i try to lonin use root account .it failed too ,with same error.any one know what is the matter about my kde 4.2?
I had a fresh install of Slackware 13.1 up and running. I was looking to use an app which could only run on a gnome distro. So I installed gnomeslackbuild. Ran into dependency hell so I gave up the ghost and decided to reinstall.Re-install resulted in a message "Call to lnusertemp failed(temporary directories full).Had this before a different machine and sorted with another install at the time.Tried this but it keeps coming up with the same message. (4 installs later).Quote:
xset: bad font path element (#23) possible causes are:
Directory does not exist or has wrong permissions
Directory missing fonts.dir
[code]....
I've tried to get an opensuse box I have to share a directory via NFS. I've failed each time, but I thought that the third time, I'd enlist some help from the forums, if I could. how do I know that the nfs server and not the client is the problem? Short answer is: I don't! That's why nfs (and many netwrk problems) are laborious, you're troubleshooting needs to take place at both source and desitination. Next question, what do I have set up so far? Well, I did download the nfs server kernel stuff (two months back) and /etc/init.d/nfsserver start seems to get set up OK. No errors and the daemons nfsd, idmapd, mountd area all running. So, I *think* that part is OK. I have the share set up properly in /etc/exportfs and have "exportfs -r" it.
OK, now onto the trickier stuff: the client and iptables. On the client pinging to the nfserver box is perfect, and I have rpcbind running. the reported error is "mount.nfs: mount system call failed" though from experience nfs errors don't mean a whole lot.However, I will go off and check now and see if I need a mountd running on client-side too.Then there's iptables .... ouch, that could be a long and painful trek. I don't see any specific ports being blocked, and it's the iptables that the default v11.2 opensuse came with. I did turn them off and the problem was the same, so whether wishfl thinking or not, I'm hoping it's not an iptables issue.
Subprocess failed. Error: RPM failed: installing package xen-4.0.0_21091_06-0.1.1.x86_64 needs 27MB on the /boot filesystemI seem not to be able to change the size of the /boot, but 11.2 loads okay but not 11.3There only 19MB left from 66 and I can't make it bigger, I hope there is someone thathas seen this. I would like to see some of the update with XEN.
View 1 Replies View RelatedToday i upgraded my system and started getting error when i update, install or remove a package. The error isn't restricted only to one repository so i thing something is wrong with my system.
[Code]....
These are the settings on my server, which has a static ip:
Code:
[tim@computim ~]$ cat /etc/exports
/media/cavern 192.168.1.*(rw,sync)
Code:
[tim@computim ~]$ cat /etc/hosts.deny
portmap:ALL
mountd:ALL
rquotad:ALL
statd:ALL
lockd:ALL
Code:
[tim@computim ~]$ cat /etc/hosts.allow
portmap: 192.168.1.2/100
lockd: 192.168.1.2/100
rquotad: 192.168.1.2/100
mountd: 192.168.1.2/100
statd: 192.168.1.2/100
When I try to mount the disk from my client machine I get the error:
Code:
[tim@localhost ~]$ sudo mount -t nfs 192.168.1.10:/media/cavern /media/cavern
mount.nfs mount system call failed
Thinking the problem might be due to iptables I tried the following command as recommended by a book I found on google:
Code:
sudo iptables -A INPUT -i wlan0 -f -j ACCEPT
didn't help so tried disabling the firewall - still getting the error
Both machines are running FC11 - should i be using nfs4?
I am running a VPS of CentOS. clock command doesn't work.[174-37-247-102.lx-vs.net ~]# clock hwclock is unable to get I/O port access: the iopl(3) call failed. How to solve the problem? I have tried "timeconfig" and set to New York and System Clock uses UTC and restart the server but it was not useful.
View 2 Replies View RelatedWhen I try to run the Online Updates to the system through Yast I get the following errors for each package:
[QUOTE]
Subprocess failed. Error: RPM failed: warning: /var/cache/zypp/packages/Packman Repository/Multimedia/i586/libaudcore1-2.4.4-1.pm.1.1.i586.rpm: Header V3 DSA/SHA1 Signature, key ID 9a795806: NOKEY
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
[Code]...
In practice I have a script that call a java program that call a linux system command. The script if I run it, from a shell functions well,so it is not a java problem. The problem come out when i put this script in a crontab schedulation. The result in this case is that java do not execute the system command. I think it depends on crontab
View 4 Replies View Relatedi try to install oci8 for php in suse 10 with this command :
$ cd/opt/oracle -> because the source in this folder
$ pear5 install oci8-1.4.1.tgz
and the result is :
/tmp/glibctestKR4FKZ:1:22: error:feature.h : No such file or directory
10 source files, building
running hpize
Configuring for :
bla...bla...bla
error: 'phpize' failed
what happen with this command? i can not found glibctestKR4FKZ folder in /tmp and 'phpize'.
I am trying to install OpenSuSE 11.2 via network.It is my pxelinux.cfg/default file
default ubuntu
prompt 1
timeout 30
# Install i386 11.2 Suse
[code]....
A network client computer gets ip address from dhcp server, loads initrd and failed on Loading Istallation System stage 4 or 5. If I try to continue installation in manual mode I get an error net_activate: ifconfig eth0 up failed I tryed network cards from different vendors it did not help. Ubuntu linux installs successfully in current environment.
I am using OpenSuSE11.1 very frequently I need to install and update the software and packages.but I am getting this error: Download failed:File '/repodata/repomd.xml' not found on medium URL...
View 3 Replies View RelatedI'm new to CentOS and the forum. I installed Cent tonight, added the RPMForge repo and installed GParted. Every time I try to launch the app, it fails with the message "The exec() call failed." I have uninstalled and reinstalled it a couple of times with no success. Has anyone seen this problem?
I have finally gotten around to installing 11.3 x86_64 on a deskside PC. All went well with the installation until the last package, fetchmsttfonts-11.3-1.1.5-noarch, failed to connect to a server and produced a "Command exited with status 5" error. I have not yet clicked the "OK" button on the error popup. Is there any way to rescue this installation?
I had tried once before, and had clicked the "OK" button before looking things over to see what was the issue since I'd figuredwas nothing that couldn't be sorted out later.However, it aborted the install with the system largely unconfigured. I attempted to fix it but gave up and started a new install from scratch, which failed as described above.I was doing a netinstall, using the oss, non-oss, and update repos.
I would like to avoid having to restart the install yet another time since I do not have the packages cached locally and most certainly do not want to go thru the package selection phase again since I'd picked quite a few additional packges. If I can rescue this one it would be great. If I have to start over, is there a way to import the list of packages from this install into the installer during a hew install
Does anyone know how I can install the following dependencies?
libcrypto.so.0.9.7 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586
libcurl.so.3 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586
libssl.so.0.9.7 is needed by amanda-backup_client-3.2.0-1.suse10.0.i586
I tried through yast with no luck.
Installed from DVD. Everything looked great until reboot. When the computer tried to reboot, it stalled. I c annot even get tp the setup utility. My computer does not work at all. Obviously I am not happy but if someone has a fix for me.
View 3 Replies View RelatedI ve succesfully installed 11.2 on my desktop using Gnome (I kept 11.1 on my system) Ive tried to install the KDE using Yast (within Gnome) but halfway the connection failed, after continuing the download the KDE does not have a menubar and I cannot do anything. I only have the KDE splashscreen.
Now (frome gnome) I would like to de/re-install the KDE but I cannot find What i should remove in yast, there is no KDEdesktop option to remove. How can I reinstall the KDE
i'm trying to install OpenSUSE 11.4 on a Macbook Pro 5,1 (later 2008). From boot menu i have chosen all the possible options, but i always get the same result.
I began choosing 1024x768 and standard kernel and i get a black screen. Reboot. I chose VESA and kernel with security adjust. Black screen, then reboot. Finally, i chose VESA and kernel with no-apic and the installation wizard loaded. I configured all and OpenSUSE began to install, but when it was finishing, the screen turned black.
I've posted this question already on opensuse@opensuse.org, however perhapsthat is not the right mailing list, while this forum is dedicated to such questions.And there seems to be much more activity on this forum then on the general mailinglist ---- and I hope to get some answer sooner than later (don't know how to proceed).I ran an update from 11.3 to 11.4, using the 11.4 64-bitDVD, and additionally Internet sources.When it then came to reboot, I got a screen
doing fast reboot
FATAL: Module thermal not found.
FATAL: Module processor not found.
[code]....
I'm trying to run OpenSUSE 11.2 on VirtualBox (ver3.0.8 on Ubuntu 9.10). The installation proceeds without a hitch, but when I try to login, the login manager (kdm?) complains that the login failed. When I go to the console, my login/password do no work there either. I've tried installing OpenSUSE 11.2 three times -- the first two times, it complained about the simplicity of my password -- and all three times I've run into this problem.Have other users encountered a similar problem? It doesn't seem like a VirtualBox-specific issue. Is the /etc/password being changed somehow?
View 5 Replies View RelatedI've recently ran the Updater Applet to install any pertinent official openSUSE updates, but I got 2-3 (they vanished before I could click on them) popups on the bottom right of my screen saying that an update had failed. Additionally, I found the following message in the Updater's lower panel:
Code:
This update fixes an issue caused by a previous
yast2-ncurses update, which would leave some ncurses
(textmode) yast2 tools crashing.
- #569000: yast2-ncurses-2.18.11-0.1.1: crash of yast -i
with a segmentation fault
I ran 11.1 security update today, now the system will not recognize most of my hardware, will not enter X,, how can I recover or revert back? I have hardwired and cannot get the network card to work,,,errors at boot indicate a problem with modules....this all occurred after rebooting from today's update??
View 9 Replies View RelatedI tried most of the methods using a graphical interface to create a live USB through a 64-bit dvd image to install opensuse 11.2 including unetbootin, Win32DiskImager, Mandriva's Seed... Everything failed, so I'm left with the option to do it through the command prompt. There is a dd tool for Windows, and I got the command line instructions in the Live USB page. One thing I don't understand is that how is insert my path of the iso image for this command in Windows: # dd if=/path/to/iso/openSUSE-11.2-KDE4-LiveCD-i686.iso of=/dev/sdX bs=4M;sync; Should I replace the bit # dd if=/path/to/iso/openSUSE-11.2-KDE4-LiveCD-i686.iso, with like something like # dd if= CDownloadsOpensuse11.2x-64.iso?
View 9 Replies View RelatedEarlier this evening I suddenly had hundreds of "Bug Buddy" windows start popping up, which seemed to be stuck in an infinite loop. I rebooted to find myself stuck in run-level 3, due to multiple daemons unable to boot.I cant copy & paste the logs as I have no way to transfer them over to this PC.
Failed services in runlevel 5: earlyxdm xdm avahi-daemon network-remotefs Of course when ever I run 'startx' neither my mouse or keyboard works.I've finally joined the forums, pitty It's because of errors.
I get an error while trying to update the repo.
Index of /repositories/server:/php:/applications/openSUSE_11.1
Code:
│Fehler bei der Initialisierung des Repositorys. ─ │
│ │'openSUSE_11.1_php': [|] Failed to cache repo (4). │ │
│ │Verlauf: │ │
[Code]....
I wanted to install it on a secondary computer in my house for web browsing and little-to-nothing more.
How can I fix or get around the error 'Authentication failed' when attempting to login?
I just installed openSUSE. The installation seemed to go well. After installation, everything loaded up and I was using the OS with no problems.
I restarted the computer to change my boot sequence in the BIOS. Then I got to the openSUSE login screen. I was presented with three options:
1. my username - When I enter in the password I specified during the OS installation it says "Authentication failure"
2. Automatic Login - just says "Permission denied"
3. Other... - Nothing seems to work here
How can I login?
I get the bootchart.tgz file to be created, but I am unable to convert it to a png file. I have tried several instructions on how to make this conversion, but none of them have worked. Here is the one listed on this forum:
after login to GUI open your browser and go to: Bootchart scroll down to Renderer Web Form and upload bootchart log tarball located in /var/log/bootchart.tgz leave PNG format nex press Render chart button. I do not see the location on the website listed, to upload a file.
The other methods I have tried entail using the terminal to convert the file, but I continue to get errors on a failed conversion, or the wrong commands.Is there by chance I do not have a certain software yet installed to make this conversion on my laptop. I have installed the minimal OpenSUSE 11.3.
I've been googling and couldn't find solution to my problem. In the past I was able to get around dual boot with Win XP but that Win 7 seems to be more resistant to dual boot. I have a Toshiba Portege T110 that came with Win 7 home edition. I parted the hdd using gparted and put Linux on extended partition. It was OK up till then. After installing Opensuse 11.3 and installing Grub in extended partition, grub came up but when I chose windows, I got error from windows boot manager saying it couldn't find winload.exe. I tried to manipulate the grub by typing:
rootnoverify (hd0,1)
makeactive
chainloader +1
boot
That didn't work at all. So I reinstalled Win 7. After Win 7 back up, I again tried to fix grub by doing this:
find /boot/grub/menu.lst (this gives hd0,5)
root (hd0,5)
setup(hd0)
quit
After rebooting, grub came back but when I tried to access win 7, I again got the black screen saying my winload.exe is missing. I'm reinstalling my win 7 for the 2nd time now. But I'd still like to get the dual boot with Opensuse 11.3 to work. What have I done wrong? Should I put grub in MBR or the mount point / ? or should it be left alone in extended partition? And how do I move grub to different place?