Every boot, I see screenfuls of staprun error messages fly by, e.g from /var/log/boot.msg:
Code:
<notice -- Aug 31 23:39:53.511288000> service boot.startpreload startstaprun:send_a_relocation:336: ERROR: reloc name too long: .gnu.linkonce.r._ZN6AsicNII18ucode_class_caymanE23NITiling
ModeLookupTableE: No such file or directory
[Code]....
I'm not sure when this occurred, but it happened either when I was trying to install the new gnome-shell, or after installing kbuntu. In any event, when I try to boot Ubuntu 10.04, I get the login screen where I enter my username/password. After doing so, I get the following error messages (in this order). I should note that add the login screen, I have the option boot gnome, kde, failsafe gnome, etc. I tried all the options with the same result:
"Cannot open consolekit session: unable to open session: failed to execute to program /lib/dbus-daemon-launch-helper:success"
"Cannot enter home directory. Using /"
"Could not duplicate ICEauthority file/.Iceauthority."
Yesterday, after I reinstall suse linux enterprise 11 in my note book. I got some error messages. They are :
From Suse linux installing processedacroread-9.3.2-0.1.1.i586.rpm
yast2-pkg-bindings-2.17.45-0.2.10.i586.rpm
After installed suse linux.
error messages for all options in yast2.
The story is when I started installing suse linux, I checked first the live cd and I got message that live cd is okay. But, when the installation process was running, I got 2 messages error. But, the messages were informing me to verified from software management module.
So, my questions are :What are acroread-9.3.2-0.1.1.i586.rpm and yast2-pkg-bindings-2.17.45-0.2.10.i586.rpm and what are they fungtions? If my guess is not wrong, acroread means acrobat reader. Is it true? Where is others place I can download them (no.1,2,3) beside the live cd? Or, if the easyest way is live cd. As yast2 got error, is there an other way I can installed them (no.1,2,3)?
Using 11.4 I noticed a couple of messages I have not seen before:-
Code:
<5>[ 14.485094] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it
<5>[ 14.485098] thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation
My machine is a TP T42 but should I try and od anything about this message or just ignore it?
[Code]...
I have an iMac, and i'm trying to setup a triple boot(Mac, Windows, Linux).
I used rEFIt and GParted to boot and create the partitions for the openSUSE.
But when I try to install the openSUSE 11.2, in the installing process, it came up "error messages".
The error messages are like: cannot download xxx files. or file have been edited by someone and is not save to install.
Btw, can i boot openSUSE from a usb linked external hard?
Running 11.3 64 bit updated to kde 4.5.4I noticed when booting yesterday the following error message is shown:-
[ 17.688956] end_request: I/O error, dev sr1, sector 4294180608
[ 17.696944] end_request: I/O error, dev sr1, sector 4294180608
[ 17.702846] end_request: I/O error, dev sr1, sector 4294180784
[code]....
I'm dual booting Windows 7 and openSUSE. I attempted to start up my computer, and got ERROR 17 on the GRUB loading page. I am assuming this is related to me disabling the openSUSE uninstaller on startup in Windows.installer seemed completely superfluous.
View 9 Replies View RelatedI am seeing a udev error message on booting that I have not seen before with LInux and which I cannot interpret. My Suse 11.4-KDE installation is fairly new. My system is a System 76 PanP4 Pangolin that originally ran Ubuntu.Uname -a returns: Linux linux-zcga 2.6.37.6-0.5-desktop #1 SMP PREEMPT 2011-04-25 21:48:33 +0200 x86_64 x86_64 x86_64 GNU/Linux. My video is a Geforce 9300M with an nVidia driver.A Google search turns up the fact that similar error messages have been reported with Fedora, Ubuntu, Meego and Gentoo. These frequently have had something to do with sound and in at least one case the advised correction was to reinstall udev. I can see where bugs were filed but with no clear response. Some of these go back several years, the most recent is within the last few months. I did not see a posting that involved Suse.
1.Can someone tell me what these error messages mean?
2.Does this pose a problem?Everything seems to work normally on my system once I am through the boot process.
3.If this is a problem how does one fix it?
Im probally just being a noob here but for the projects sake I thought it would be good to identify this problem. I have an old advent laptop and I tried to install Opensuse from DVD on it. I followed the installation as normal but when I tried to boot it said some sort of check was forced and then I have to enter the admin/root password upon doing this I got the message system repair # in red. I have tried to repair the system through the installation DVD and tried re-installing it but I still get the same message.
View 9 Replies View RelatedWhen I first turn on I get the windows boot manager where I can choose between openSUSE 11.2 installer (LOCAL) and Windows Vista. Selecting either has the same result of trying to boot the openSUSE. This results in error 17 and pressing any key takes me to the GRUB4DOS where I can get to the command prompt.
View 9 Replies View Relatedwhile booting with bootsplash turned off there's a message "FATAL: Module ata_piix not found FATAL: Error running install command for ata_piix" .Though everything works fine i'd like to know what does this message mean and is there a way to disable loading of ata_piix whatever it means.
View 2 Replies View RelatedI have a number of applications (Evolution, Openoffice Writer & Calc, Firefox) that are popping up an error message when I close them, but the window snaps closed before I can read the message. The applications run fine as far as I can tell. how to slow or pause the error message so I can figure out what's going on.
View 9 Replies View RelatedI am currently facing a problem with rsync (or maybe ssh, I don't know yet). I have daily backups that are done via cron using rsync from my computer (client) to a NAS. And systematically during these backups my computer completely freezes (no remote login possible, nothing), so I have to hard reboot. As you might imagine, I cannot do this every day. In /var/log/messages there is just a line like that :
Feb 26 17:23:53 eggplant rsyslogd: -- MARK --
right before the hang. The rsync worked well before and I don't really know what changed in my system config. In /var/log/rsyncd.log I sometimes (but not every time) I get :
2011/02/26 16:39:19 [13229] rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at rsync.c(543) [Receiver=3.0.7]
I aldready update the default rsync from opensuse 11.3 to 3.0.7.7, but it does not help. How can I at least know what is going wrong? I am trying to track down the problem but don't know how to start. Last also a log of the rsync command (client) running ssh in verbose using the command "rsync -av --delete --timeout=180 -e "ssh -v -p xxxxxx -i /root/.ssh/rsync-key_eggplant" /mds root@xxxxxxxx:/volume1/autoBackup/eggplant":
OpenSSH_5.4p1, OpenSSL 1.0.0 29 Mar 2010
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
[code]....
Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade:
E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report. I wanted to attach the log files; YOUR FORUM RULES WOULD NOT ALLOW ME TO AS IT SAID FILES TOO LONG!
could not get my sound to operate so i followed the intructions toMulti-media and Restricted Format Installation Guide - openSUSE Forumsnow i have a working audio and video player but my sound is depreciated to an almost inaudible levelwhen i try to open pulse i get connection failed:connection refusedand when i try alsa gui i get function snd_ctl_open failed for default:connection refusedcan anyone please correct this with me or for me. Noob wanting not to regret leaving windows
View 9 Replies View RelatedMy /var/log/message log file is filling-up with these messages:
Code:
Mar 25 09:55:37 gzunder kdm_config[9818]: Multiple occurrences of section [General] in /usr/share/kde4/config/kdm/kdmrc. Consider merging them.
[code]....
My memory could be failing but I thought there was a tool, possibly in Yast, to access the boot logs in earlier versions. Can't find it now though. Is there such a tool other than console?I should clarify in case I am using the wrong terminology that I seek the log which scrolls up the screen during the booting process. Reason is that I see several errors and warnings there and wish to investigate further.
View 9 Replies View RelatedSo I'm using opensuse 11.2 and recently installed ubuntu 10.04 to a different partition and all went well. when I boot opensuse I get a lot of interesting messages yet everything seems to load fine and I've not noticed anything behaving differently. I checked the boot log via
Code:
Looking through it i did see a line in there that looked familiar from the boot up and it is
Looking through syslog, I see some peculiar messages that occur when booting my Debian machine up. Can anyone explain to me, why it seams to think my filesystem is read only, and what do the other messages mean? Is there anything I need to start worrying about?
Feb 26 08:48:21 chris-desktop kernel: [ 4.082355] EXT3-fs (sdb3): recovery required on readonly filesystem
Feb 26 08:48:21 chris-desktop kernel: [ 4.082361] EXT3-fs (sdb3): write access will be enabled during recovery
[code]....
What i'm trying to accomplish seems rather silly but is needed for my little project here.
I'm using OpenSuSE 11.2 as a media center PC and need it to login automatically(console not X). That one i accomplished without problems.
However, after login i can see all the info about the services that were started and that needs to "go away".
One could do a "clear" in the .bash_rc and or .bash_profile but it will still show the login prompt which i don't want to see either (i don't even want to see the blinking cursor as well).
Question: How do i accomplish that so that the login console shows only the "splash screen" without any output of the kernel,rc.status nor the "issue-file"... just a plain blank screen ?
how to record/save logout/shutdown messages for OpenSuse 11.2.
View 9 Replies View RelatedI want to know if there is a way to disable the GUI console on 10.04 Server I want the traditional pure text console ... no plymouth, no plymouth-theme, just 80x24 console. Another question, Is there a way to get those traditional messages when booting? Like 8.04 Server does?
[code]...
I just upgraded an 11.1 install to 11.2. The upgraded system appears fully functional but I get many "all config files need .conf" warning messages during boot. See below. I also did a clean install on another system to compare and the clean install does not exhibit the same behavior so the warnings are evidently related to it being an upgrade. The system's working but I would like to understand why this is happening and clean it up. This system provides some key services to my networks and I have spent a lot of time getting this and the systems it interacts with "just right" under 11.1 and I am not particularly interested in starting over except as a last resort.
View 2 Replies View Relatedi downloaded Vmware Workstation 7 onto my Windows XP PC and i have tested the os on a HP laptop so the OS is fine, well back to the point i load it up and VMware has a error saying it can not find "C:/Documents/allusers/applicationdata/" something like that ill add a picture so you will see.
i installed an rebooted and i still get this problem.
everytime I try to shutdown/reboot, it gets to the screen where it has the green/bold status messages on the side, but then it simply stops. The cursor doesn't blink, nothing happens...you could wait 10 minutes, and it would still be at that same screen. I don't know if I've described this well enough for anyone to understand, but I hope so! I don't have a camera, but if I did...I'd post a picture of where I mean...
But like I said, after getting to a certain, without actually shutting down, it simply stops and does absolutely nothing. This is rather inconvenient, and I'd like to find a solution to this if possible. EDIT: I'm sorry I didn't provide any hardware info, but I'm using Gnome...This didn't happen 100% of the time KDE like it does now though. (But it DID happen in KDE as well) I'm using OpenSUSE 11.2... I'll be back in a moment with hardware info, assuming it may aid in a solution.
[Code]...
I am currently running all my applications off a HD as I was unable to install the grub bootloader on my ocz pci express card (grub won't install on the pci express card as it is a raid0 array). I would like to use the HD for backup only and run everything off the ocz card - with the exception of booting (which is unfortunate but I didn't manage to make the pci express card boot). How is it possible to tell suse during the installation to create the /boot on the HD and the rest on the pci express card and also to allocate the remainder of the HD as empty storage area??
View 1 Replies View RelatedI installed Opensuse 11.3 on a separate partition to vista on my Acer 5115. It runs fine but the GRUB boot loader failed to show the Vista OS. I tried to add it by editing menu.As far as I can see (and I don't have much experience with these things) the Vista OS is there, on sda5, but doesn't boot correctly because the winload.exe is in the wrong directory. Why the sdax numbers are all rearranged is a mystery too, but I have reinstalled vista several times so that could be why.I don't have a vista recovery cd (wasn't given one), is there any way to fix this within opensuse (which works fine)?
View 9 Replies View RelatedI recently tried to upgrade my openSuSe 11.1 system using the instructions at:
SDB:System upgrade - openSUSE
I successfully got the system to 11.2, but the upgrade from 11.2->11.3 went awry. The installation froze during the update, and I had to start it over. The first issue I had to deal with was the fact that rpm had been upgraded and zypper hadn't, so zypper wouldn't function because older rpm files that it would search for had been deleted. After rolling back rpm to a previous version, I managed to complete the upgrade to 11.3 and everything looked good. However, when I rebooted the system, it hangs at a blank screen. More precisely, the system seems to get through all of the BIOS stuff and then hang while loading the OS (I assume). Although I've worked on Windows boxes for a long time, I'm a complete novice at OS installations/upgrades for Linux systems, so I'm not even quite sure where to begin to troubleshoot this. Ideally, I'd like to be able to fix the installation on the system to save the data on the hard drives, but I realize this might not be possible. My first thought was to use a recovery tool that I'd seen on some Linux installation CDs, but I see that for openSuSe 11.3 and on that utility has been dropped. I can, however, use the disk to get to the "Rescue" command prompt, so maybe there's something I can do from there?
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
We have 2 machines (quad core intel i5) running suse 11.2. They were clean installs and both suffer from this problem on around 50% of boot-ups. Other times, the system boots quickly and is fine.
Basically, one of the CPU's gets hammered to 100% (according to KDE system monitor) for around 10 minutes after boot up. Although the other three CPU's seem mostly idle, the system is very slow, to the point of being unusable until suddenly the system recovers and runs normally.
I've looked at 'top' and the KDE system monitor and both show no process taking more than a few % of the CPU. So it is a mystery as to what is taking up so much CPU and why it does it some days and not others !
One other thing, if you try to run virtualbox during this time, it (eventually) says that the kernel drives are not loaded - so possibly the kernel is stuck loading drivers. Infact, from dmesg, I can see that the system is still booting but other than the extended time stamps, the only obvious difference between a good boot and a bad one seems to be the line :
Code:
[ 141.794727] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. which is there after a slow boot. The sound works ok (as does everything else).