I can't get Vmware Workstation 7.1 to install on 11.3.
Nothing to be found in VMware logfiles, the installer just rolls back the installation.
Is there anyone who has any idea on how to make it work?
(I install all the required modules by the way)
After a few tribulations, I managed to get VMWare server installed. The only problem is that it will not recognize any usb devices. I installed usb in the virtual machine using the VMWare interface and in preparation for that, I followed the instructions in the tutorial to the letter regarding fstab and the vmx file. Supposedly, at least according to Windows control panel, the usb controllers and interfaces are installed. The VMware web interface says the same thing. However, neither the Device tab on VMWare nor VMware Tools show any usb devices. The usb devices - a printer, removable drive, and magicjack - are all recognized by Linux. How can I get the virtual Windows machine to recognize the devices?
This is crucial since my major use for it is to run the magicjack which is not supported in Linux.
Is it possible to install Snow Leopard 10.6.6 VMware AMD edition (which I downloaded) on VMware linux? It is under Windows 7 so I just need to know if everything of VMware linux (like Hardware Virtualization) is the same under linux as for Windows.
View 1 Replies View RelatedIs it possible sitn opensuse 11.2 to install vmware server or another free vmware?
View 9 Replies View RelatedI'm thinking about installing OpenSuse 11.3.
Before loosing a long time... install VMWare Server on OpenSuse 11.3?
i am using Open Suse 11.4 as VMWare guest, I installed the Open Suse on the Guest using the Live CD and when I am trying to install vmware-tools am getting an error that its not able to find the linux-headers I have installed all other prereq's using zypper, when i try to do zypper in linux-kernel-headers am getting this error
Loading repository data...
Reading installed packages...
'linux-kernel-headers' not found in package names. Trying capabilities.
'linux-glibc-devel' providing 'linux-kernel-headers' is already installed.
Resolving package dependencies...
resolve this ? Is there any way i can specify the linux-glibc-devel' providing 'linux-kernel-headers' for the vmware tools so that the installation is completed successfully
I just loaded openSUSE 11.2 64bit and can't get VMware server to install. I had it working just fine in 11.1. I installed: kernel-source, make, gcc, gcc-c++, downloaded VMware server RPM installed with Yast. opened a console went root and ran: /usr/bin/vmware-config.pl. Make aborts with the following few lines:
Prior to this had a whole rift of Warning Such as:
Unable to build the vmmon module.
In the past I followed instructions I down loaded for "swerdna" and it worked well.
I am using my OpenSuse 11.2 in VMware Workstation. I didn't do anything to it and when I open it, there is no more GUI coming up. Only command line interface came up. how can I change this back to GUI?
View 9 Replies View Relatedfirst of all, please excuse my bad english. We rent a dedicatet server at Strato.de.I need to install VMWare Server. Actually this should be no Problem for me. I installed the server an patch.When I run the vmware-config.pl starts the problems:
Code:
Your kernel was built with "gcc" version "4.3.2", while you are trying to use "/usr/bin/gcc" version "4.3". This configuration is not recommended and VMware Server may crash if you'll continue. Please try to use exactly same compiler as one used for building your kernel. Do you want to go with compiler "/usr/bin/gcc" version "4.3" anyway? [no] I submit "y".
[Code]...
I'm a issue with a opensuse 11.4 guest VM. The root partition goes read-only while the VM was running normally.
I note this /var/log/messages:
Code:
Aug 22 10:57:02 guest1 kernel: [508161.475307] mptscsih: ioc0: attempting task abort! (sc=dc29c5c0)
Aug 22 10:57:02 guest1 kernel: [508161.475380] sd 2:0:0:0: [sda] CDB: Write(10):
Aug 22 10:57:02 guest1 kernel: [508161.475582] mptscsih: ioc0: task abort: SUCCESS
[Code]....
How do i install vmware tools on 11.2? I uninstalled the open-vmtools non-sense removed the remaining modules from it (no clean work from suse here) installed gcc, make, kernel-source and kernel-headers installed the vmware-tools rpm i started vmware-configure-tools and it says that my kernel was built with gcc 4.4.1 while i try to use version 4.4 now.(if i do a 'gcc -v' it clearly says version 4.4.1) so what ?! I said "yes" here, it tries to build the memory moudle and fails......
View 9 Replies View RelatedI am running OpenSuSE 11.2 64bit which was upgraded from 11.1. When I moved to OS 11.2, I found out the hard way about VMWare not working. Then tried to remove it and fix it myself.
When I try to run the config script...
Code:
parents:~ # vmware-config.pl
Unable to find the answer LIBDIR in the installer database
(/etc/vmware/locations). You may want to re-install VMware Server.
Execution aborted.
parents:~ #
When I try to install vmware-server
Code:
parents:~ # rpm -i VMware-server-2.0.2-203138.x86_64.rpm
package VMware-server-2.0.2-203138.x86_64 is already installed
When I try to upgrade vmware-server
Code:
parents:~ # rpm -U VMware-server-2.0.2-203138.x86_64.rpm
package VMware-server-2.0.2-203138.x86_64 is already installed
When I try to force install vmware-server
Code:
parents:~ # rpm --force VMware-server-2.0.2-203138.x86_64.rpm
rpm: only installation, upgrading, rmsource and rmspec may be forced
Other than rebuilding my box, how can I recover from this?
I just had one hell of an experience trying to get openSUSE 11.2 to run on VMware server 2.0 on a Windows XP host. I am posting some instructions on how I finally got things working.
1) Download the openSuse iso image (and add-on CD if needed)
2) Download and install the VMWare server
3) Before you try to start the server console, you will need to configure the web access to allow you to log on. go to press Start->Programs->VMware->VMWare web access->Configure Tomcat
4) on the logon tab check logon as: option
5) add your account there and set the password
6) Now in your web browser (I use firefox) access the console via: [url] [url]
7) Before you start to create a virtual machine, you will want to set up the server to have access to your iso's. The server will only allow VM's access to specific directories through "datastores". You can either move the iso images to what has been specified as the default datastore... or create another datastore that points to the where you have the iso's.
8) Now we can create our virtual machine. This is simple, just press the button and follow the prompts.
a) at some point it will ask about an CD-Rom, you will want to use your suse DVD iso image. Select the option and then navigate the datastore that contains the image. Once found click and continue.
b) Network interface has 3 choices:
Bridged - the virtual machine will appear on the network as any other computer. Allows the VM to host server applications. User needs to have control over the network to ensure DHCP requests are handled (or static IP is assigned).
NAT - VMWare server will manage a virtual router, the VM is then connected to this router. On this router, the hosts internet is used as the WAN. Users do not have to have control of the network, but will have to setup port forwarding in VMWare to host server applications
Host Only - This means that the virtual machine can only talk to the host. The only way to get networking is to have a proxy through the host machine. This is setup on the host independent of VMWare. Users do not need control of the network, but control over the host. I doubt you could host server applications though.
9) With the VM created we can start it up. We can open a window to it through the console tab of the VMWare server console. When I first started it, it was stuck looking for an OS once the console finally rendered the graphics. A reset, an F2 at the post and selecting the appropriate boot media for boot got the installation started.
10) Install Suse as you would any other suse installation. I added a separate partition for swap, but kept the rest on one big one. Others may still want to maintain the separation of home and root
11) ---- Important Error/Solution ----
Once the installation has completed many will notice that the mouse or keyboard does not work! This was the source of my biggest head-ache. Some may think it was a problem with VMWare tools... I tried that to fix that and found the tools were working properly.
For some reason today when I attempted to reboot my machine I am unable to start runlevel 5. The errors I am getting are the following:
Failed services in runlevel 5: vmware
Skipped services in runlevel 5: cifs nfs
I uninstalled Vmware in hopes that it would solve the problem. No dice.
how to debug this or has anyone seen this issue before.
Bug-buddy tells me vmware-user crash on every-time I boot up. I don't know what to do about this just pop-up without i changed anything on my machine. I saved a "crash report" on the desktop but couldn't understand what was the "problem" when I read it.
Opensuse 11.3 gnome.
I am trying to install openSUSE 11.4 as a virtual machine running on VMWare Server V1.0. VMWare Server is running under WinXP 32bit.
I configured the VM with the following settings:
10GB disk
512 MB Ram
The installation starts from the DVD after inserting the disk. OpenSUSE setup appears, i do not touch the default resolution 800x600. Every thing is looking good. After setting the language, the installation process continues. Then a problem with the screen/resolution/graphical adapter appears. After a while I cannot read anything from the setup screen, everything is unreadable. I remember I had those problems already with 11.3 but I did not follow this issue an took openSUSE 11.1 instead. With 11.1 I could follow the installation instruction till the end and I got a running system.
Is there some better way of getting my display size set to 1280x960 when I launch openSUSE 11.4 under VMware Server? Here's what I've done so far: I am running Windows 7 on an AMD Phenom II system (motherboard: Gigabyte 880GMA-UD2H). I installed VMware Server (version 2.0.2) so that I can run openSUSE 11.4. The initial install went pretty smoothly. However, the display size was set to 800x500. I attempted to set it to 1280x960 by changing the /etc/X11/xorg.conf.d/50-monitor.conf file as follows:
Code:
/etc/X11/xorg.conf.d/50-monitor.conf
Section "Monitor"
Identifier "Default Monitor"
## If your monitor doesn't support DDC you may override the
## defaults here
# HorizSync 28-85
# VertRefresh 50-100
HorizSync 1-10000
VertRefresh 1-10000
## Add your mode lines here, use e.g the cvt tool
Option "PreferredMode" "1280x960_60.00"
# 1280x960 59.94 Hz (CVT 1.23M3) hsync: 59.70 kHz; pclk: 101.25 MHz
Modeline "1280x960_60.00" 101.25 1280 1360 1488 1696 960 963 967 996 -hsync +vsync
This resulted in a display size of 1734x1342 (or something close to that). I noted from the /var/log/Xorg.0.log file that the vmwlegacy driver is being used instead of the vmware svga driver. There is a note that the vmwlegacy driver does not support the "PreferredMode" setting in the monitor section of the xorg.conf files. For the time being, I have set my horizontal and vertical rates to 60kHz and 60Hz, respectively. This does limit the maximum display size to 1280x960, but for all the wrong reasons. How do I set up my system to get the correct display size?
I have installed VMWare server 2 on a windows XP host. Then I installed Suse 11.2 on the VMWare server. For the most part everything seems to be working Ok. However, the key board will type two letters with every keystroke. I have used the the accessibility options to force a hack fix (slow keys). Also, the host pointer looses synchronization with the guest. Simple fix, running it off the screen forces VM to synchronize.
I have managed to find work around solutions, but overall it is annoying and effects my productivity (IE Ctrl+C takes about 2 seconds to register!!!). I would like to find better solutions. So I am looking for advice on how I could address these issues, I need advice on two methods:
1) Assuming the problems are within Linux, I will need to tweak/change the drivers for my mouse and keyboard, how would I do that?
2) Assuming the problem is with VMWare Tools, I will need to tweak/update the tools. Now, I have noticed that Suse has their own custom setup for the tools. Thus the documentation for tweaking the tools doesn't apply (ie cannot find vmware-tools-config.pl). So how would I go about playing with that side of things?
3) Ruled out the problem being with VMWare itself. Whenever I run the system in command line mode, or in the graphical installer, the keyboard works fine. It is only within KDE that the problems arise. Thus it is either X-Windows/KDE or the VMWare tools layer that is causing the problem. So my next question, is there a way of turning components off and on to narrow in on what component is causing the problem?
im running suse 11.3_x64 clean install along side with Win7 Pro _x64 had a big fight installing Vbox 3.2.8 PUEL edition but i need to test some VMWare products like 'VMWare vShpere (ESXi 4..0.1 - which i couldn't install in a vm in Vbox) ' before putting it in production enviroment in some of my clients. version: VMware-Workstation-Full-7.0.0-203739.x86_64 The installation of vmware was quite simple with no errors. the problem kicks in after the first reboot when i try to run it. before installing vmware i installed the following:
[Code]..
When i try to run vmware workstation the 1st error kicks in: Before you can run vmware, several modules must be compiled and loaded into the running kernel:
[Code]...
installed VMWare workstation by following the steps on this page. Everything seemed to install ok, I have a VMWare Workstation and VMWare Player link in my System menu, but when I click them nothing launches.
I even rebooted to see if that would help, nada.
how I can launch VMWare Workstation? Need to set up a couple Windows clients.
After upgrading Ubuntu to version 11, vmware-server-console stopped working - only gray window opens. After killing the process error message appears:
/usr/lib/vmware-server-console/bin/vmware-server-console: symbol lookup error: /usr/lib/i386-linux-gnu/libgio-2.0.so.0: undefined symbol: g_cclosure_marshal_VOID__VARIANT
I have problem installing Suse on vmware, after checking media i got "wrong digest" even if i try to skip this i got md5 checksums errors. The best I use DVD' SLED 11 and SLES 11 from course i was some time ago
(in both the same error). I thought maybe something wrong with my dvd in laptop (GSA-4082N) but i tried on my old PC with same result.
I am currently installing 11.2 on a new 1TB hdd.the opensuse installer does not allow me to create a / partition (ext4) >20GB. Does anyone know why and how I can get around this limitation?
View 9 Replies View RelatedI successfully installed OpenSUSE on a 4gb pen drive using the instructions contained within this portal. However, for the life of me I can't figure out why the persistent feature doesn't work.
Here's my partition table map:
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code]...
I've recently added a new hard disk and due to mother board controllers this new hard disk is known as sda.Before that my boot partition was /dev/sda3 and know this changed to sdb3.Whenever grub menu appears and I choose opensuse,it can't find /dev/sda3 .It seems that I should edit menu.lst or change boot loader parameter.something like root (hd1,2).But I don't how I can do this with opensuse boot loader.Though I could do this with CentOS easily.
View 7 Replies View RelatedI am trying to install the latest SUSE in a virtual machine created on 64 bit Windows 7 Ultimate. When the CD loads in the VM's console it says 'This is a 32 bit computer. You cannot use 64 bit software on it'. I am running the free VmWare Server 2.0. Windows 7 sys info clearly shows it as 64 bit OS, and it is running on i7-720 (definitely a quad core 64 bit proc).
View 6 Replies View RelatedI've got a multiboot system with Windozin the first drive and first partition like everyone recommends. I have several distro's and just let them install their bootloaders, but always on hd0 mbr. I installed Debian 5.0.1 this way and it wouldn't boot, so I got SGD to "fix" it, which it said was successful, but all I get is a partition doesn't exist when I try to boot. I put Debian on /dev/sdb3, I loaded Linux Rescueand mounted sdb3 and verified that its menu.lst had the right boot numbers (hd1,2). fdisk even showns /dev/sdb3 as boot as shown by the asterisk under the boot column. Should I do a complete reinstall of grub, maybe using one of the other distro's as the holder of grub? At one time they did all the grub launching as each addition was made
View 9 Replies View RelatedI upgraded to 11.3 and now a program I need to run under CrossOver doesn'trun. All I want to do is backtrack to 11.2 but it has disappeared from therepositories and I can't find my install dvd any more. Where can I download11.2 from?
View 6 Replies View RelatedI had a working setup of opensuse 11.0, dual booting using grub installed on the home partition. I tried to install 11.3 from the coverdisc of linux format (LXFDVD136). It took 5 goes before the install succeeded. Mostly stopping at the "boot installed system" stage. I put 11.3 on a formatted partition in the same place as 11.0, and put grub there too.
The system will not boot without assistance. I have to use a supergrub disc and tell it which partition to boot. If I use boot linux from supergrub I get the Grub error message 15 file not found. Supergrub CAN find windows and it boots with the win command. Automatic and yast initiated attempts to check for software upgrades are blocked by the application with pid 4587.
I have openSUSE in a dual-boot environment with Win Vista. Everything worked fine with 11.0, but after installation of 11.1 Vista does not hibernate. The screen gets dark, but after a while it turns on again so I can see that Vista did not hibernate, but just lock the session. In another forum I was given the tip to add makeactive to the Vista entry in menu.lst. This worked for the initial problem, but got me a new one: the computer booted straight into Vista without showing Grub, so I had to reinstall SUSE (after doing this Vista once again does not hibernate).
how to fix the hibernation problem or what changed from 11.0 to 11.1?