Ubuntu Multimedia :: Surround Sound With ALC888 Intel DG31PR Gude?
Mar 16, 2010
Well i will write this down one more time i hope you don't delete it again To enable surround sound with ALC888 on Intel DG31PR for all versions of ubuntu inluding Lucid.(this works on other distros with alsa as well) gksu gedit /etc/modprobe.d/alsa-base.conf Find this line (if there is no such line (or the file is empty) it doesn't matter just add the next line and save it)(note that on older Ubuntu versions the file is named "alsa-base" as far as i remember): # Prevent abnormal drivers from grabbing index 0
Add this line after the #Prevent abnormal drivers from grabbing index0: options snd_hda_intel model=3stack-6ch-dig Then use this command to edit pukeaudio: gksu gedit /etc/pulse/daemon.conf
Find this line:
; default-sample-channels = 2
Change it to (make sure to remove the ; in front of it):
default-sample-channels = 6
I am using 10.04 64-bit on a GA-770TA-UD3 motherboard with onboard Realtek ALC888 audio chip. I'm having scratchy sound with games like World of goo and Penumbra. I solved the problem for Penumbra by selecting OSS option instead of ALSA from the settings menu but I'dont have that option in World of goo (and many other games).I have no problem with video or audio files. The board is [URL]..
I installed 11.3 Gnome 32 bit in my system twice after couple logins and updates the system freezes. I can't use keybord etc. Only option is Power off/on. It happens either during boot/during usage randomly. I posted my issue in this forum and implemented the suggestion but after couple of reboots, now it won't boot, not even in safemode. So I have decided to Install again. In the same machine I have installed Ubuntu and it's working fine without any problems from 1 week.
Alsa says I'm using a HDA ATI SB audio card with realtek ALC662 rev 1. chip, I've set the default channels to 6 for 5.1 in /etc/pulse/daemon.conf but got only stereo.
I would assume I have to do something with the channel map, but I don't know where to begin. I can say it is not a hardware issue as it works fine in windows 7 where my mic in is my sub-woofer/center out and my line in is my line in is my rear speaker out. I tried going into sound preferences to see if I could get it to use line in and mic in as sub-woof out and rear out , but there was no such option. All I was allowed was analog duplex 1 output / 1 input.
When I decode an audio clip which contain 5.1 streams (the encoding doesn't matter - or does it?) I cannot find an option which allows redirection of the lower frequencies (from front, back and center channels) to the sub woofer (LFE channel). I understand that this perfectly normal and this is how 5.1 supposed to work. My problem is that my speakers are not full range, so they cannot reproduce the bass in the streams. What I want to know is if there is a way to do something like this: [URL]
Which is described as: Bass redir - Bass redirection. Route basses from all channels to subwoofer. Works only if it is subwoofer at output speakers. Highly recommended for systems with separate subwoofer. Basses are routed before mixing so basses are shown at LFE input level (although 'real' LFE may be absent).
I'm aware of the enable-lfe-remixing = yes option. It works fine for stereo, but not for 5.1
I use ubuntu 9.10 and my pulseaudio version is 0.9.19. The player I use most is SMPlayer (version 0.6.8 (SVN r3213)) and AC3-liba52 for AC3 decoding. My system is up to date.
Currently using an Asrock ION 330 with an SPDIF output and running 10.04It works as stereo but can't get the system to run as surround sound and everything shows as 2 channels only.The hardware itself supports it fine as it works under windows 7 without issues so it has to be a config issue somewhere.I have tried everything I can find via google including upgrading the alsa drivers but so far there has been no change.
I've been trying to get my surround sound(5.1) to work for the past couple of of days, followed a number of guides, but nothing seems to get it working at all. I'm connecting the speakers using 3 analogue audio cables, I have tested and they work fine under Windows. When I go into the Sound options in Ubuntu I don't see a 5.1 profile listed under the Hardware tab, only stereo(and that works fine).
The sound controller is a Realtek ALC892 built-in to my mobo(Gigabyte P55A-UD3).
Here is some info I've seen requested in other threads, I'm running 10.10 RC, but I can assure you it doesn't work under earlier versions.
Code: Linux Yurippe 2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:32:27 UTC 2010 x86_64 GNU/Linux Code: **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog]
I just got a 5.1 Surround sound system and set it up. I found that it was only working as stereo, though (That is, only the two frontal speakers were producing any sound). I made sure everything was not muted in alsamixer and checked that the hardware was set to 5.1 in the Sound Preferences Hardware tab.
I'm using Ubuntu 10.10 64bit and my sound card is an onboard Intel DG41TY, Realtek ALC888VC codec.
I recently purchased a Creative Fatal1ty headset with a USB connection, and was wondering if it's possible to use its 5.1 surround sound capabilities under Ubuntu.
I have a Acer Aspire Revo R3600 running Ubuntu 10.10. Its a clean install, all I have done is update the NVidia drivers and ASLA. The PC connects to my AV Receiver via HDMI and I have stereo sound but no surround sound. If I go to System > Preferences > Sound and look under the hardware tab I only have "Internal Audio Digital Stereo (HDMI) Output" and no mention of surround sound or 5.1 etc. I assume this is part of the problem.
I have these Creative Inspire M4500 4.1 surround sound speakers.I got them to work succesfully on my older computer by installing the ALSAmixer. and then unmuting the channels. However on my new computer even after installing ALSAmixer, i cannot seem to be able to get playback from my rear two speakers. I tried the community ubuntu documentation and ALSA's own guide(which seemed too complicated for me.)
Here is the update to the old thread that somehow disappeared "HOWTO: A52 Encoded 5.1 Surround Sound Awesomeness with PulseAudio and ALSA on Hardy" thread (archived here). See also this bug report.There are two steps here: add the a52 plugin, and tell pulseaudio to use it.
Step 1: Go to a terminal and do the following:
Code: sudo bash echo "pcm.a52 {[code]....
Pulse should come back on its own unless you disabled autospawn.Now pulse should be aware of your digital surround output. Go to System -> Preferences -> Sound. Click on the "Hardware" tab and change the profile to one of the 'Digital Surround 5.1' profiles. Play some sound (I like to test with www.pandora.com) and enjoy!If it doesn't show up, it probably means that alsa didn't create it correctly. To test if alsa sees the a52 device, type:
Code: aplay -D a52:0
If it errors out (audio open error: No such file or directory) then that means it did not like your asound.conf settings. You might learn something by looking at the output of 'sudo alsa reload' or just 'aplay'.[code].....
I got a 5.1 desktop sound sys for my recently built gaming rig. It sounds great. On Windows, that is. In ubuntu when I'm playing music, primarily when the subwoofer plays the bass, the speakers sound like they're farting and ripping phone books in half. Also, they get very statticy and sort of quiet. In sound preferences, analog stereo duplex is selected, if that's of any value. How can I get good sound playback in ubuntu?
On my initial setup I follow the Comprehensive sound guide that is posted on the ubuntu forums because I wanted to get the spdif work Optical out with surround. After a while I was able some how to get it to work and but my headphones would no longer output sound so in an effort to get sound back to the headphones I maanged to ruin the the settings for the spdif.My question is how can I get spdif back and switch between headphones and spdif.I there no way to figure it out how do I purge every file that has to do with sound and recompile. ( THe comprehensive sound guide showed how to purge the alsa utils but that didnt work if someone know why please let me know and if you could explain.)
I found out there is no way to install headset's own drivers. At least I am looking for a way to switch its 5.1 property on. Is there any way for it on ubuntu 10.04 with pulse or whatever works?
My 785G motherboard comes with an integrated sound card. In the manual I see there is an option to install Dolby Software to make 2-channel stereo sources play to 4, 5.1, and 7.1. Is there any equivalent Dolby or other software for OpenSuse 11.2?
I just installed Maverick, and everythings working great except sound. I only have 2 channels working front left and right, no middle, no rear, no bass. In sound preferences i can only choose between different stereo options.
I'm using Xubuntu Natty at the moment, on an Acer Aspire 5739G. Figured I would go to Realtek's site and get the most recent soundcard driver, since the built-in subwoofer has never worked on Linux for me.
I used the automatic install script, then when it tried to probe for other devices, suddenly I had no sound.
I'm currently getting
Code: korin@corrosion:~$ aplay -l aplay: device_list:240: no soundcards found...
I tried reinstalling the ALSA driver, but to no avail. I now have no sound, and no idea a) why this failed, and b)
I have on-board sound on a EVGA nForce 750i FTW edition motherboard, not sure if you need the board type, but I'm not getting any sound out of my headset which is a Razer Barracuda 5.1 surround sound. link me to a very basic tutorial video/text document for Ubuntu Linux.
I am having intelG33 motherboard with hda soundcard realtex alc888 supporting 5.1 surround system. Using opensuse 11. I have successfully installed alsa drivers. But iam not able to get sound from surround and center speakers. Only able to get from front speakers. When i used alsamixer. it shows me master and capture volume controls only. Before alsa, I tried default sound configuration in my opensuse but didnt able to get surround even when I increased volume control for surround speakers to maximum. Please help me... why im not able to get it working? I am new to linux and getting used to it
I just got Ubuntu 10.04 installed and I seem to be having a problem as many others with the sound. because a laptop with no sound tends to be a wee bit boring
I've got an old Philips 5.1 surround sound system and I'm just wondering how to set it up.Everything's hooked up properly (I think) but it's journeyed to no avail. I'm actually wondering if it's possible. I haven't got a surround sound card. I simply have a twin audio RCA to stereo cable plugged into the sound card.I've set the hardware in sound preferences to Analog 5.1 Surround. Here's the contents of my /pulse/daemon.config
Code:
# This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify
I am running Ubuntu 10.04 with an Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller, and no sound output. I have both pulseaudio and ALSA installed. I have already checked with
Code: alsamixer that my sound isnt muted and aplay -l outputs this Code: xxxx@xxxx-ubuntu:~$ aplay -l
I have a 4.1 surround setup that the computer sees a 4 channel setup (stuff going to subwoofer is split out in hardware so all the computer sees is the front and rear l/r channels).
All well and good, but phonon isn't giving me an option to set my output to 4 channels, only stereo (which means my rear speakers are useless) or 5.1 (which makes me fear losing channels if I play anything with actual surround sound).
I cant get sarround on pulseaudio 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) I have 5.1 speaker, sound is only from front, front left && front right and from subwofer its no sound from rear left and right.
