i have a OpenSUSE 11.3 with Gnome desktop ( core i5 processor, 2 GB DDR3 RAM ) want to run memtest, plz advice me which prog is best for it and where to find documentation or videos.Moreover is there any tests for motherboard / processor
View 8 Replies
I'm about to upgrade a server for a local non-profit, and am looking at a Gigabyte GA-P55-UD3L motherboard and an Intel Core i5 750 processor. Does anyone have any observations or experiences with SUSE on this platform?
View 7 Replies View Relatedneed to know start till end explantory steps to configure my internet connection. using amd athlon 2 x2 processor and newer motherboard asus
View 11 Replies View RelatedI have two SUSE(2.6) virtual machines running in the same subnet with two network cards each as shown below.
VM1------------------------------------------------------------------------------
appstage1:~ # ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:29:22:5A:24
inet addr:192.168.128.12 Bcast:192.168.128.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe22:5a24/64 Scope:Link
[Code]....
Ultimately my DB will run in VM2 and any DB requests coming in at 2055 of VM1 should be forwarded to port 2055 of VM2. Since I do not yet have a DB running I am trying to test with netcat.
i have installed ubuntu in my laptop.since i have AMD processor fedora doesnt support AMD processor..the recent version fedora 12 supprots AMD processor.i am doing my final project in ns2 hence it should support tht too!!! Which is the best choice to override ubuntu grub fedora 12 or redhat linux.
View 3 Replies View Relatedis there a way to run hardware tests on a remote VPS? Ubuntu-10.04-x86_64
View 4 Replies View RelatedFifteen years ago buying a new computer was easy, magazines provided comparative tests of PCs for one's budget. Now typical magazine specs are not high enough for my needs:
I need a PC that can duplicate a 5 gb file in less than 10 seconds.
Where do I find comparative tests for PCs at this very high end?
After many modifications, I managed to install ns2.28 , but some validation tests failed. I got the following message at the end of validation test:
validate overall report: some tests failed:
./test-all-simple ./test-all-tcp ./test-all-testReno ./test-all-newreno ./test-all-sack ./test-all-tcpOptions ./test-all-sack-full ./test-all-tcpVariants ./test-all-LimTransmit ./test-all-aimd ./test-all-greis ./test-all-rfc2581 ./test-all-sctp ./test-all-tcpHighspeed ./test-all-frto ./test-all-friendly ./test-all-srm ./test-all-realaudio ./test-all-ecn ./test-all-ecn-full ./test-all-quickstart ./test-all-hier-routing ./test-all-lan ./test-all-mcast ./test-all-vc ./test-all-mixmode ./test-all-red ./test-all-adaptive-red ./test-all-red-pd ./test-all-rio ./test-all-vq ./test-all-rem ./test-all-gk ./test-all-pi ./test-all-cbq ./test-all-schedule ./test-all-jobs ./test-all-intserv
to re-run a specific test, cd tcl/test; ./test-all-TEST-NAME
Notice that some tests in webcache will fail on freebsd when -O is turned on. This is due to some event reordering, which will disappear when -g is turned on. I tried to run the test individually one after another, but that is too time consuming, it prompts for permission after every test and thus runs many test & opens a lot of xgraph window. The tests I run so far individually, agreed with the reference output. Now I am wondering, should I report a bug about it, or should I hire a kid to run those failed 40 tests( which require hitting the ENTER key 1200 times,maybe ), or what else should I do.
System: OpenSuSE 11.0Mouse: Microsoft Intellipoint OpticalI'm having some troubles and am in need of any assistance you can spare. I've recently upgraded to an ASUS A8N-SLI, SuSE transitioned over smoothly as I set the system to mount via volume/disk labels; it booted up perfectly although, naturally, I needed to run SaX2 to reconfigure the X server. After I did this, I logged into my desktop and after about a minute the mousetopped responding. The lights would still light up upon movement however the cursor would not move unplugged and reinserted the device however it would not light up.
I have tried the mouse on my Windows disk and my other Windows computer and it works fine. I have already tried reconfiguring SaX2 andremoving the mouse0 file from /dev/input yet the problem still persists. In fact, I'm navigating the forums with a keyboard. After the mouse fails, if I try testing a new SaX2 configuration, switching virtual consoles or doing anything which would switch resolution the computer locksp and displays s screenful of coloured, fuzzy lines. I imagine this has something to do with an X configuration somewhere, I'll post my X configs here.
Code:
# /.../
# SaX generated X11 config file
[code]...
After installing a new motherboard msi k9m6pgm2-v2 openSUSE 11.4 64 won't boot.
This is what happens -
The computer boots normally
The grub menu appears as usual
I select opensuse & press Enter
The boot splash appears......but the progress bar stays still for a few secs ...... then the following appears
Code...
Want me to fall back to dev [something something] Y/n ?
When I press enter
Then I press ctrl+alt+del to reboot.
Is there a way to fix this or do I have install openSUSE all over again ?
I have server with Xeon E5620, 8 GB RAM, three 1TB hard drives which are in sw RAID 5 and two 250GB disk which are in sw RAID 1, all of this on Intel S5500BC motherboard. Installation of opensuse 11.0 11.1 11.2 and Enterprise suse 11 was successfull. After grub menu i get blank screen. It`s blank for about 60 - 120 sec and then appear Suse loading page and loading bar. This also happens if i change to text mod. But in text mod i can see what`s going on. First 5-10 lines are informations about partitions and then i get output just like on this link. Yfrog Image : yfrog.com/5nimag0108djIf i hit any key (in graph and text mode) booting will continue to opensuse loading screen and loading bar.I have tried installations on one workstation and one server and didn`t have this problem.
View 4 Replies View RelatedJust installed opensuse 11.4 using a new motherboard, the MSI H67MA-E35. According to the book that came with the Motherboard it has a Intel H67 chipset and a "HD audio codec integrated by Realtek ALC887". Also have an older Hauppague TV card installed in the system. Not setting the sound quality I would expect. By this I mean that the audio played by webpages is low. And the audio played by the TV card is distorted. The volume control is ineffective.The only way I can adjust the volume is by the control on the speakers. Perhaps it is just as simple as setting opensuse to use a different soundcard?
I have run the script also-inso.sh and the results were uploaded to: [URL]..
The other information requested is as follows:
alsa-devel-1.0.24.1-4.9.1.x86_64
alsa-utils-1.0.24.2-3.1.x86_64
alsa-plugins-32bit-1.0.24-6.1.x86_64
alsa-oss-1.0.17-32.1.x86_64
alsa-plugins-pulse-32bit-1.0.24-6.1.x86_64
alsa-plugins-1.0.24-6.1.x86_64
[Code]...
In C++ language, we can do the following compound tests,
Code:
std::string a, b, c, d;
if ((a == "Yes" && b == "Yes" ) || (c == "Yes" && d == "Yes")) { ... }
In bash scripts, how can we do the parenthesis around compound tests?
Code:
if [ "$a" = "Yes" ] && [ "$b = "Yes" ] [ "$c" = "Yes" ] && [ "$d" = "Yes" ]; then
...
fi
I have a USB sound card that works sometimes with Firefox and with the VLC media player, but in the middle of a Gnome session it drops out and the sound starts coming from the internal card. In the Gnome Sound Preferences USB Audio is still selected and the test sounds still come loud and clear from the USB card, but the applications are ignoring this and have switched to the internal card.
Some system components are:
Centos 5.3 x86_64
Toshiba laptop AMD Turion
Roland UA4-fx audio interface sound card
Gnome 2.16.0
The Gnome Device Manager shows the UA-4fx card and under it "USB Audio ALSA playback" and "USB UA4FX ALSA Control Device" devices are listed. I want to make the USB card the default for all applications and have internal card take over only when the USB card is unplugged.
if OpenSuse 11.2 supports the new Intel I7 8 core chip and the motherboard (Intel DX580SO) on Linux Platform?
View 1 Replies View RelatedIm used suse 11.3 GNOME, many tutorial i try to hear my sound on my speaker but until i wrote this post, i still cannot hear sound on my speaker. This my output...cat /proc/interrupts
CPU0
0: 157 IO-APIC-edge timer
1: 8251 IO-APIC-edge i8042
[code]....
I have a problem with kmix, which uses 100% of my processor without stopping. And this is providing to rise of temperature above 80 degrees Celsius. The problem became actual after one of updates of 11.4 series.
View 9 Replies View RelatedI tried to listen mp3 on in, but it was too silent (of course, I tried to put speakers to be louder).. I switched to winXP (as a second OS) on this computer, and sound volume is ok, so I suppose it's problem in OpenSuse... I have ASROCK N68C-S UCC motherboard with nForce 630a sound chip on it.
View 2 Replies View RelatedAm investigating processor affinity theory and practice, am somewhat surprised at the paucity of information on something that has been a part of many Windows Enterprise type applications for more than a decade and although I haven't investigated would assume is supported by big iron UNIX.What it is Processor Affinity is the *NIX terminology for "soft" assigning a process and its threads to a specific processor core. On multi-tasking machines and particularly those which run heavy loads it can be useful to "advise" the Scheduler to isolate/assign heavy loads to a core separate from other processes. I also have a specific situation where I would like to run more than one instance of a specific app, but cannot when sharing the same processing environment.
What I've found so far By default, any and all processes are assigned an affinity that permits running on any and all available processors.The taskset utility can be used to modify the affinity for any process, which means that once an application/service/process has been launched, only then can the affinity be modified.It seems that the RH platform may also have a utility called tuna which might provide some tuning capabilities in addition to setting affinity but does not seem to be in the SuSE repositories and I cannot find source.Is there a reference or utility that can launch an application with a specified processor affinity?
Are there any tools available in openSUSE for evaluating cpu/processor performance. My processor/cpu is under warranty til end of October, will like to know whether I need to get new one or i am good. I am looking for something that can log an event and report. Have tried stress and crashme but they dont show any results.
View 9 Replies View RelatedI'm starting to spec out a new GNU/Linux boxen. I'm considering the ASUS P6X58D Premium motherboard. Has anyone had any experience with this board in terms of compatibility with openSUSE 11.2/11.3? I'm mainly concerned about:
on-board sound: Realtek ALC889
ethernet: Marvell 88E8056
new interfaces: SATA3, USB3.0
being able to use: AHCI (which I had to turn off on a netbook, Acer Aspire 1410, for hard drive stability), 64-bit kernel I'm planning to use an i7-930 or i7-950 (should the price drop in August as rumored) with 6 GB DDR3 1333 RAM (not planning to overclock, as yet). The graphics card will probably be an NVidia GT240 or so (budgeting about $100 for the graphics card).
Also, I'm hoping to move some old IDE drives over using IDE->SATA 1 bridge cards. Any advice on this? Or should I just get a new SATA 3 drive? For the optical drives (DVD RW/CD RW), I'd like to use bridge cards since there's no benefit for the higher speed SATA interface, or is there?
P.S. For the naive question: As I haven't dealt with 64-bit installs before... I would need the 64-bit kernel for full access to all the extra address space, correct? After that, I can still run 32-bit apps, with a slight speed penalty?
This is really not a Linux or SuSE question. However, the folks on this forum are polite and knowledgeable, so I will give it a try.In the process putting together a new computer.About 99% confident in the following:otherboard: ASUS Crosshair IV FormulaCPU: AMD Phemon II X4 955Graphics card: Gigabyte GV-R685D5RAM: Unknown. ASUS, as well as several other motherboard suppliers, have not approved of any 1x4GB DDR3 RAMS. Has anyone had success with getting a 1x4GB DDR3 RAM to work on the ASUS Crosshair IV motherboard?
View 2 Replies View RelatedI'm doing some tests and playing around with postfix in a test squeeze server. What I want to achieve is a postfix mail server using ports 465 and 587 with smtp authentication to send mails. I followed this howto: [URL].. and I'm using a php script with pear functions to test sending emails to a gmail test account of mine. This is the script:
<?php
require_once "Mail.php";
$from = "Webmaster <webmaster@server>";
$to = "My Name <myaccount@gmail.com>";
$subject = "This is sent with pear as a test";
$body = "This is the body of the message";
[Code]...
Epson stylus d88 recognised by 10.04 no tests or maintenance available in local host and obviously not printing. It's like it's there but they cannot talk to each other
View 3 Replies View RelatedI am using suse for a long time but I did not yet experience this strange error:
I installed 11.2 and now 11.3RC1 on a new HW: ASUS M4N72-E with AMD Phenom2 X4 965, 8GB Memory, standard settings.
I experienced unusual errors when copying large files to the new system with scp/ssh (connection broken).
Even stranger I could not read .tgz files created on the older machine, same OS 11.2, but MB ASUS M2N32-SLI with AMD Phenom X4 9850
Testing further reveals that if I create a .gz file from the same source it produces every time a different output:
-rw-r--r-- 1 root root 3875041280 Jun 21 01:51 wwtest.tar
-rw-r--r-- 1 root root 1326141906 Jun 21 01:55 wwtest1.tar.gz
-rw-r--r-- 1 root root 1326137319 Jun 21 03:26 wwtest2.tar.gz
-rw-r--r-- 1 root root 1326146273 Jun 22 07:32 wwtest3.tar.gz
[Code].....
I never saw something like it, I guess it must be something with the underlying library not working on the new processor. I tried with slower memory speed, newest BIOS etc ...always the same errors. Other wise the system works absolutely stable.
When I compare the generated files with one created on the older system it looks like there are single bits missing in a random number of bites.
I consider building a new computer using a mainboard with support for two processors. I wish to do this to improve performance of course, specifically in regards to audio production. Though, what I would like to know is if anyone has some experience with using such a hardware on an ordinary desktop system and if there are some general implications I should be aware of?
View 7 Replies View RelatedIf opensuse will run on a notebook with an Intel atom processor?
View 5 Replies View RelatedI recently set up a Samba Server on a new Gigabyte (Desktop) Motherboard with support for SATA 3.0. I used a new 1T SATA 3.0 (6Gb) Hard Drive. The system is performing poorly, seems to have problems both opening and closing files (*.dbf).
Also will hold a file as open periodically (may be a Samba Issue).
Does the O/S have to support this standard, or is it a function of the Hardware...?
Got this new motherboard and it's running 11.4 of Opensuse and it works great. Even got the DVI working with the monitor with help of instructions I found here. However the sound is poor and the volume controls just as bad. According to the motherboard docs it has THX Tru Studio sound pro, a Intel H67 (B3) chipset. Six audio ports. And the chipset integration by Realtek ALC837. I have tried to find this information in the sound setup with no luck. What was selected was the Intel model (no other specifics was found). According to the Alsamixer it says HDA Intel PCH and the card and chip is set as PulseAudio. What should the sound card be set to other than Intel?
View 3 Replies View RelatedBasically system monitor and the "top" command show 2 cpu cores when I only have 1 (a 3 Ghz P4 on my work computer).
I'm not sure if the two are related but I frequently get 100% CPU usage when running a few programs together (Kile, Firefox, Chrome and okular for example) at which point even the movement of the mouse cursor slows down.
