OpenSUSE Multimedia :: Audio With The MSI H67MA-E35 Motherboard?
Sep 15, 2011
Just installed opensuse 11.4 using a new motherboard, the MSI H67MA-E35. According to the book that came with the Motherboard it has a Intel H67 chipset and a "HD audio codec integrated by Realtek ALC887". Also have an older Hauppague TV card installed in the system. Not setting the sound quality I would expect. By this I mean that the audio played by webpages is low. And the audio played by the TV card is distorted. The volume control is ineffective.The only way I can adjust the volume is by the control on the speakers. Perhaps it is just as simple as setting opensuse to use a different soundcard?
I have run the script also-inso.sh and the results were uploaded to: [URL]..
The other information requested is as follows:
alsa-devel-1.0.24.1-4.9.1.x86_64
alsa-utils-1.0.24.2-3.1.x86_64
alsa-plugins-32bit-1.0.24-6.1.x86_64
alsa-oss-1.0.17-32.1.x86_64
alsa-plugins-pulse-32bit-1.0.24-6.1.x86_64
alsa-plugins-1.0.24-6.1.x86_64
[Code]...
View 1 Replies
ADVERTISEMENT
Sep 11, 2011
Got this new motherboard and it's running 11.4 of Opensuse and it works great. Even got the DVI working with the monitor with help of instructions I found here. However the sound is poor and the volume controls just as bad. According to the motherboard docs it has THX Tru Studio sound pro, a Intel H67 (B3) chipset. Six audio ports. And the chipset integration by Realtek ALC837. I have tried to find this information in the sound setup with no luck. What was selected was the Intel model (no other specifics was found). According to the Alsamixer it says HDA Intel PCH and the card and chip is set as PulseAudio. What should the sound card be set to other than Intel?
View 3 Replies
View Related
Aug 4, 2010
Is there a way to record streaming audio from an integrated motherboard.
View 3 Replies
View Related
Feb 14, 2011
This is a problem that I have had since Ubuntu 8.04 when the sound on my system stopped working. I have an Intel DG33BU motherboard with audio onboard.
I originally had 7.04 installed on the system (sound worked fine) and did an upgrade to 8.04 for a couple of reasons and found the sound no longer worked.
I have since upgraded to 10.10 and despite trolling various audio threads have yet to get the sound working again. I have noted that when the system boots up there is a quick message (approximately from memory) 9.32.0061: audio codec not found for hda-intel.
Is there a troubleshooting guide or information someone can point me toward as I would like to solve this problem?
I have been trying to use the information at [URL]... otingProcedure to work through the problem.
Output:
WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.conf.083110, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/alsa-base.conf-bak, it will be ignored in a future release.
[Code]...
View 1 Replies
View Related
Aug 21, 2010
Im used suse 11.3 GNOME, many tutorial i try to hear my sound on my speaker but until i wrote this post, i still cannot hear sound on my speaker. This my output...cat /proc/interrupts
CPU0
0: 157 IO-APIC-edge timer
1: 8251 IO-APIC-edge i8042
[code]....
View 9 Replies
View Related
May 7, 2011
I tried to listen mp3 on in, but it was too silent (of course, I tried to put speakers to be louder).. I switched to winXP (as a second OS) on this computer, and sound volume is ok, so I suppose it's problem in OpenSuse... I have ASROCK N68C-S UCC motherboard with nForce 630a sound chip on it.
View 2 Replies
View Related
Oct 17, 2010
I'm thinking of installing openSUSE-11.1 Gnome on a Fujitsu-Siemens Amilo 7400M laptop because the wireless in Gnome is much more user friendly than KDE3/KDE4 in openSUSE-11.1. The idea is to give this laptop to my 84-year old mother and things need to 'just work' for her (she currently has a desktop running openSUSE-11.1 KDE3 that uses a WIRED interface to the web).
I refuse to update this laptop to openSUSE-11.2 nor 11.3 (nor other recent distributions) because every kernel update after the 2.6.27 kernel has broken the Intel i855GM graphics drivers for that laptop. There are many bug reports and none have fixed the problem for this Fujitsu-Siemens implementation of the i855GM graphics.
Hence I am looking at Gnome.
I booted the laptop to a Gnome openSUSE-11.1 liveCD and wireless is easy and works great. But audio is very very VERY bad. It is incredibly user unfriendly and it does NOT work well. I assume that is because pulse audio in openSUSE-11.1 was very immature.
I note these updated packages in the openSUSE-11.1 update repository:
Code:
So my question is, did the updates to pulse audio (in the openSUSE-11.1 update repository) fix the pulse audio situation? Are there ANY helpful views on this?
Currently my wife is using this laptop with KDE-4.4.4 (and openSUSE-11.1) so I can't just install Gnome and play with it without taking the laptop away from her for a while (note the hard drive is too small for a dual boot of KDE/Gnome).
View 6 Replies
View Related
Jun 7, 2011
to start off, i'll post the specs of the machine:
dell inspiron e1505
3.2 gb ram
1.86 ghz intel core duo
ati x1400 gfx
opensuse 11.4 kde 32 bit.
okay, here are the details: can't play any audio with amarok when desktop effects are enabled because the minute a window is moved, it will distort the audio. even when disabling desktop effects, some applications still cause this. can't play videos videos even with desktop effects disabled because of the same reason.
i just switched from ubuntu and when i ran version 11.04, i had to disable kms to do anything. i tried on opensuse 11.4 and the audio was flawless but the gfx went all to hell.
View 3 Replies
View Related
Apr 18, 2011
I'm trying to get audio working on a new Intel DQ67EP motherboard. lspci -v shows:
Code:
00:1b.0 Audio device: Intel Corporation 6 Series Chipset Family High Definition Audio Controller (rev 04)
Subsystem: Intel Corporation Unknown device 200f
Flags: bus master, fast devsel, latency 0, IRQ 7
[code]....
Googling around, I've learned that 6 Series Chipset blah blah is generally driven by the snd-hda-intel driver. But when I modprobe that, it isn't magically connecting to this audio chip. My kernel is Linux 2.6.27.8 #1 SMP Thu Sep 23 17:21:53 GMT 2010 i686 Intel(R) Core(TM) i7-2600S CPU @ 2.80GHz GenuineIntel GNU/Linux (derived from Slax 6.0.9) Is there a place I should be going to find newer drivers? Or perhaps there is some bleeding edge patch I should be applying? (Intel's web site is useless. They only give Windows drivers for audio. I did get the ethernet working by using their latest e1000e driver.)
View 2 Replies
View Related
May 24, 2010
Intro: Let me start by saying I've spent two days researching this issue and resolution. I am a noob to Linux, but I've done tons of research as I like to resolve my issues on my own. From the time I've spent with Ubuntu 10.4 Lucid over the past couple of weeks, I'm loving it and want to stick with it. I have it dual booting on my Laptop with no issues.
System:Motherboard: M3a32-MVP Deluxe Wi/FiVideo Card: ATI Radeon 3870 512 GBRam: 8GB corsair (4x2GB)HDD: Uh, several, there are 5 HDD's installed on my system with several OS's.Problems: No Audio from MB, Raid controller not working.My main concern right now is my audio. I have 2 512 GB Maxtor drives in Raid0 running Win7 Ultimate that I can't access, but like I said, the audio is more important.
I have audio coming from the HDMI port in the video card, but it's choppy. I'd rather use my MB's audio device anyway so I can utilize my surround sound system. I've obtained the Linux drivers from ASUS but don't know how to install them. Besides that, in sound preferences, it appears to be loaded and I've tried every combination of settings possible. And before you ask.. It's not muted, (this seems to be the typical first smart a$$ response to noobs regarding sound).aplay -l
Code:
austiclees@Austiclees-Linux-Desktop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
[code]....
View 5 Replies
View Related
Mar 23, 2011
I'm trying to diagnose a weird problem ... maybe someone has an idea where to start. I'm having a problem with flash videos. The video part displays as if the fast-forward button is being held down; audio sounds correct.
I'm thinking "synchronization error" (duh!) but I'm not sure how to start to diagnose the issue. I'm running OpenSUSE 11.4 x64, and the problem shows up in both chrome and opera.
View 3 Replies
View Related
Jul 27, 2010
Volume of sound is minimal compared to my MS OS.
View 1 Replies
View Related
Nov 26, 2009
I want to create a few audio cd's and the only burning software I have is K3b. But when I open it a window is displaying that says there is a system configuration problem and literally saying:
Mp3 Audio Decoder plugin not found. K3b could not load or find the Mp3 decoder plugin. This means that you will not be able to create Audio CDs from Mp3 files. Many Linux distributions do not include Mp3 support for legal reasons. Solution: To enable Mp3 support, please install the MAD Mp3 decoding library as well as the K3b MAD Mp3 decoder plugin (the latter may already be installed but not functional due to the missing libmad). Some distributions allow installation of Mp3 support via an online update tool (e.g. SuSE's YOU).
knows any other program to create audio cd's
View 2 Replies
View Related
Apr 10, 2010
I managed to take some .avi files and convert them to the various files needed for viewing on my DVD home player. I used DeVeDe for the conversion and, of course, k3b to write the files to disk.
One thing I wanted to do though, is to have an audio file play while the menu is being displayed like many of the commercial disks. I can't seem to find a way to accomplish this. DeVeDe has many options to control the appearance of the menu but I don't see anything about sound.
I'm in the US if that makes a difference. I found it does for the video format.
View 4 Replies
View Related
May 9, 2010
I'm in a real mess I have been reading loads of forums and wikis for a week now, trying to work out how to configure mythtv and ALSA to pick up the audio output from my hauppauge HVR 1300. I am using it to watch the RF output from a sky box, so there is only one channel which I have managed to tune ok.
I can listen to other sources of audio such as dvd mp3 etc. and I have run speaker test pointing at ALSA:default and I get audio, but when I point mythtv at ALSA:default I get glorious silence which for once is not what I want.
I have read some comments about having to redirect the audio output with sox but have not really understood how, and there are other comments about connecting a cable between the tv card and the aux in of the sound card but have not hmanaged to find a way of doing that either. If there is someone who have used this card and configured the analog audio I would love to know how you did it.
View 2 Replies
View Related
Aug 5, 2010
after installing opensuse 11.3 i am finding that i cannot recieve any audio with video with any application.
i can hear certain types of audio, it seems any audio that is not attached to video. i can hear the welcome chime through my speakers after i log in to opensuse and i can also listen to .mp3 files played with amarok. i can watch videos with multiple players, videos videos etc., but there is no audio happening with the video.
i am thinking now this may actually be a hardware problem, since it seems to persist with different software, and only with audio attached to video. i'm thinking maybe there is a problem with my graphics card and its driver (or a lackthereof), although i'm unsure of why i can still watch video. i don't receive any error messages or anything, nor have i attempted to manually install any drivers for my existing hardware. i tried cranking every volume control i could find, including the system volume, but still no volume with video (its weird, its like i can hear it a tiny bit when i crank it, perhaps this is just the internal system beep speaker trying to fill in for the gfx card?).
the card i'm currently using is an nvidia card and although its not exactly old, i have read about some problems with nvidia being reluctant to produce drivers for linux in the past. after some brief googling of nvidia and linux, i was surprised to see that nvidia has an entire portion of their site devoted to unix/linux and open source drivers (perhaps they're doing better now).
is there any way that i can troubleshoot this problem, or do you think the solution is simply purchasing another graphics card from a vendor that has a good reputation for linux support?
View 9 Replies
View Related
Aug 30, 2010
I am a longtime Fedora user. Moved over to OpenSUSE 11.2 after Fedora 13 won't install on my old hardware. I am unable to play DVD or Audio CD using VLC. I have OpenSUSE 11.2 with Gnome desktop installed.
After a fresh install, I followed the steps in this FAQ:
Code:
http://forums.opensuse.org/english/information-new-users/new-user-how-faq-read-only/407184-multi-media-restricted-format-installation-guide.html#post2058613
Thereafter I tried to do RedDwarf's 10 point multimedia check. But it seems like #5 doesn't return results as expected and #6 fails for some packages.
Code:
r2d2@linux-vp8l:~>
r2d2@linux-vp8l:~>
r2d2@linux-vp8l:~> #1 check if missing dependencies
[Code].....
View 2 Replies
View Related
Dec 9, 2010
I mainly use KDE apps only, but a problem in Amarok is forcing me to look elsewhere. I'm not sure how long this issue has existed but I'm unable to play any sound from certain applications.
So far Rhythmbox, Exaile, Guayadeque, Firefox and Songbird don't produce any sound. Amarok, Juk, SMPlayer and VLC are fine. As the apps with problems are mainly Gnome/GTK apps, I'm suspecting a gstreamer problem.
My desktop is 11.3 x64 with KDE 4.6 beta 1. I've tried all three phonon backends, although Xine is the only one that works with Amarok. Pulse wasn't installed, I tried installing it but it didn't even detect my SPDIF output, so no audio whatsoever. Hardware is ATI HD4200 onboard sound card through the SPDIF output. Gstreamer is installed.
View 9 Replies
View Related
Jan 30, 2011
my laptop speakers aren't that brilliant (like most laptop speakers), but i was wondering if i could improve it by equalising it. the problem is that high-pitched noise (such as clapping) is really loud and shrill, to the point that it becomes painful to listen to. for example, this video i just can't listen to on my laptop: videos - argumental - s3e2 threesomes (nothing naughty, just a bbc show!!). i'd just like the ability to turn the high pitched sounds down a bit.
View 3 Replies
View Related
Mar 13, 2011
VLC looses audio during playback (.iso of DVD, not encrypted)Pretty sure this happens with .avi .mp4 etc.. also (can't check ATM)
View 6 Replies
View Related
Jul 14, 2011
I'm using k3b to rip an audio CD and save it on my computer. It fails with:
Code:
Devices
-----------------------
LITE-ON DVDRW SOHW-1633S BPSA (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite] [%7]
System
-----------------------
K3b Version: 2.0.2
KDE Version: 4.4.4 (KDE 4.4.4) "release 3"
QT Version: 4.6.3
Kernel: 2.6.34.8-0.2-default
NOTE: It only fails with mp3, ogg works (but I can't use ogg because my player doesn't understand that format).
View 2 Replies
View Related
Sep 5, 2011
I put in a dvd and couldnt hear the first 3 minutes of one dvd, i put in a second dvd and could hear anything from it, how do i know what codecs to install to hear the audio? the video is viewable
I got an audio disc to play in kaffeine but not in amorok, in setting of amarok i hit the configure phonon and pick my audio device hit test and i can hear sounds.
View 9 Replies
View Related
Sep 8, 2011
I've finally got round to setting up my speakers and am now experiencing a slightly odd sound problem; some programs run sound perfectly, whereas some are completely silent. For example, running mplayer from command line produces sound, whereas wine, flash, kaffeine, system sounds, etc, are silent. I'm assuming this is likely a pulseaudio problem, and I've ran through the things suggested on the suse troubleshooting page for that, but haven't had any luck [URL]rpm -qa '*alsa' output:
Code:
alsa-plugins-pulse-1.0.24-6.1.i586
alsa-firmware-1.0.24.1-3.1.noarch
[code]....
View 4 Replies
View Related
Apr 23, 2009
I run opensuse 11.1 64 bit with KDE, and I have never been able to get the CD player working. Either it does not load, or once in awhile it also shows a message saying something like "cd player not configured", - which is odd because Suse is able to use it for installing additional programs and such from the Suse Dvd. I am also quite new in this, my first Opensuse distribution is the current.
View 9 Replies
View Related
Nov 14, 2009
i just installed 11.2 and i do not get any audio from flash movies (e.g. videos). (startup sound and amarok work ok). interestingly i do manage to get sound out of flash in a particular circumstance:
* i install 11.2 from the livecd using default settings.
* at the end of the process i log in as a normal user
* in a console as super user i run "zypper install flash-player"
* flash-player and nspluginwrapper get installed (nothing else)
* i start firefox and i am able to play flash movies with sound from videos
* i reboot and log in as a normal user
* i start firefox and now flash movies from videos play without sound
View 9 Replies
View Related
Jul 8, 2010
I have developed an audio problem; although continue to get sound with kaffeine and aamrok, firefox recently quit playing sound; no software updates were performed, it just quit. It has always been buggy, like audio would cut out if another program tried to play a sound and firefox and/or aamrok would have to be restarted. this is different though, it's nothing to do with a conflict it just doesn't work. It won't play sound from flash videos from the internet or locally but I can see the vids, and it won't play mp3's (these both will play fine with aamrok or kaffeine). It worked fine until all of a sudden, Also, konqueror is exhibiting the same behavior as firefox, and it too used to play sound just fine.
I have already used yast to update anything to do with "codec" "xine" "flash" and "firefox"
View 1 Replies
View Related
Sep 5, 2010
I have a problem about playing cds in my newly installed Opensuse 11.3 KDE 64 bit.If I put an audio cd and play it with Kscd or any other device it can play, but after few seconds it hangs, plays again, hangs etc.I have installed the files explained in the multimedia guide, ( - maybe with one exception; - I misread the guide and did not delete the VLC repository right away.I have since tried to address this by using YasT Software Management to switch all packages,
View 9 Replies
View Related
Oct 27, 2010
DSS and DSS Pro file formats are used by professional voice recorders such as the Olympus DS-4000, Olympus DS-5000 and Philips LFH-9600. Is there any known program running under Linux to play and/or convert these files into something more compatible?
View 2 Replies
View Related
Dec 3, 2010
I am wondering if there are working realtek drivers for 11.3 and where to get them? I went to realteks site but only found drivers for linux 2.6 and i dont know if they will work.
View 9 Replies
View Related
Jun 1, 2011
I need to capture from my webcam. It has a mic too.I can specify video input device as /dev/video0.I specified input audio device as /dev/dsp2 ( OSS device, corresponding to USB Webcam), Now VLC throws an error, "VLC is unable to open the MRL 'alsa:///dev/dsp2'. Check the log for details".Thinking it wants an alsa device, I specify device as /dev/snd/pcmC2D0c. (got it from kinfocenter and dolphin). Now again an error, "VLC is unable to open the MRL 'alsa:///dev/snd/pcmC2D0c'. Check the log for details.".I try with any device, the same error. I have added myself to audio device so that I can read/write to the mentioned devices.I see no way of switching VLC to use OSS. And I see no information (documentation on net) on it's expected device listing for audio.
View 5 Replies
View Related
