I have an HP Pavilion dv5 and Opensuse 11 with dual boot (windows and linux).. When I try to disable the sound using the hardware switch, it does, but when I try to reenable it it doesn't work.. it shows the same image that I get when I try to disable the sound.. The only way to reactivate using switches is to press vol +.. I have the lastest kernel and the lastest BIOS upgrade.
View 5 RepliesI have a small audio problem: the Audio that exists from the back of my PC is working like a charm, but the one that cames out from the Frontal output doesn't work at all. It works well on OpenSuse 11.2, but it's not working on opensuse 11.3.
View 9 Replies View Relatedi just upgraded from Skype 2.0.0.72 to 2.1.047. Now my microphone isn't working anymore and i cannot select it in the skype options. From now on i can only select the PulseAudio server ..
So i have read some howtos for PulseAudio. They say i should starte PulseAudio Volume Control. ok.. Now i should go to the tab "Recording". This tab doesnt exist on my pc. I upgraded to the latest version of this volume control. It still doesnt exist.
I am using OpenSuse 11.0 with KDE4.3
Here are some screenshots:
[URL]
PS: My mic is still working with applications, that dont use pulseaudio.
I am using open -suse 11.1 .During start up I am getting notification such that,The audio playback device HDA intel (ALC888 Analog) does not work falling back to default.
View 2 Replies View RelatedI'm not able to configure my microfone. Audio works very well. HW it's OK, mic works well on windows. Recording WAVE 'foo.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
Plug PCM: Linear conversion PCM (S32_LE)
Its setup is:
stream : CAPTURE
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
[code]...
I've bought a Avocent SwitchView MM1 KVM switch, og and connected my two Ubuntu boxes to it. Toggling the keyboard and mouse between them work only when pressing the buttons on the kvm switch itself, but not when using the hotkey combination ("Scr Lk" x 2, then key 1 or 2). Does anyone knows how to debug this
View 5 Replies View Relatednot sure exactly when this broke, but for some reason I'm not able to use CTRL-ALT-F1 anymore to fall back to the first virtual console.I can kill X with CTRL-ALT-BACKSPACE just fine, but I'd like to be able to get a normal shell to kill things when I've messed too much with graphical stuff.
View 4 Replies View RelatedSo i want to install AMD drivers from the website. I know.. I know.. Its the same old story but I play games and such so i need them...
So I'm using the --buildpkg switch and have tried every Debian/stable, Debian/unstable, Debian/testing etc.. none of them work. I get en error stating a folder is not found.
How do I build packages specific to Debian. in the --listpkg it says Debian is supported but i cannot get the %**^ %#@@$ ATI drivers ever to work right.
i'm running Ubuntu 10.10 32-bit on an Acer Aspire 3050 laptop with an Atheros AR5BMB5 WiFi card.
The problem i'm having is that the hardware switch to turn the WiFi on and off isn't working right. When I hit the switch to turn it off, the light doesn't turn off, and Ubuntu just disconnects from the network and searches for more WiFi networks - it doesn't say that the WiFi has been deactivated, and I don't think it is. When I hit the switch again, it finds my network and connects to it.
The lspci -v | less command gives me the following information for the WiFi:
Code:
08:04.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
Subsystem: AMBIT Microsystem Corp. Device 0418
Flags: bus master, medium devsel, latency 168, IRQ 21
[Code]....
It lists a different model of card, but it's using what I assume is the correct driver, so I don't know if that has anything to do with it. I've checked the card itself and it is a AR5BMB5.
I would like to fix it so the switch actually turns the WiFi off instead of just making it search for more networks (I assume it's not actually turning off), and perhaps make the light turn off as it should as well.
switch between Pulse Audio ALSA OSS etc in 11.2
View 5 Replies View Relatedswitch between Pulse Audio ALSA OSS etc in 11.2
View 1 Replies View RelatedI have problems with keyboard layout switcher. On Gnome everything works. But when I start to use other DE I can't switch keyboard layout by default. So I create xorg.conf, but anyway it doesn't work...
View 1 Replies View RelatedI'm trying to extract files off of an audio CD using the program that came with Ubuntu. In the preferences I set the format to FLAC but when it's done and I open up the file manager, all the files are mp3. When I try to play the file with Songbird it tells me it can't read the codec. What's going on? I've extracted the music off of CDs before.
View 6 Replies View Relatedyou have an onboard soundcard that you have or may not have disabled in the BIOS, and you intend to use headphones with a USB sound card with headphone and microphone jacks (or no mic jack, it doesn't matter), but you notice that the headphones are detected. Alsamixer provides an interface to control the volume, etc etc, but still the headphones do not work..In my case, the module snd_hda_intel was being loaded for my onboard soundcard that I had disabled in the BIOS before booting the computer for the first time, and even though I tried to "activate" the USB headset in alsamixer, I still couldn't get the headset to work.
Solution as a trial: Open a terminal, and look to the code section for what you need to type.A big missing key to my puzzle is how to simply restart and/or reload a module so that it isn't necessary to unplug and plug back in the USB device. Can't I just re-discover the USB devices? (or other such hardware, such as a PCI card, or otherwise inaccessible component?)
whenever i oped an audio program, it doesn't work. for example in ardour it says, "JACK is running as another user".I think this is the problem for most of them.I searched for JACK and found a folder and it says the user's name is root.
View 1 Replies View RelatedFollowing instructions here: [URL] However, when I hit test in the audio settings I get an error saying it doesn't work. And when I try to load the installer exe I get the following error:
View 3 Replies View Relatedhappened and now half of the speakers plug is stuck in the back of my PC. cant get it out, because it's very deep. i decided to use the front jack for sound but it wont work.already tried alsa mixer and upgraded my kernel. i think the problem is that i need to somehow kill the jack in the back of PC because its still alive and sending signals to that half-dead jack
View 2 Replies View RelatedI've seen this problem on dozens of different forums but I haven't found anybody with my specific problem or a solution that has worked. I have an nVidia GeForce 8400GS which I just installed in my Debian box and I can't get the HDMI audio to work. Kernel version is 2.6.32-5-amd64, nvidia driver version is 260.19.36, alsa version is 1.0.21. Output of lsmod shows that nvidia module is loaded. Output of aplay -l code...
I feel like I've looked everywhere on the internet for a solution to this and I just can't find one. It seems that everybody is able to see their nVidia audio device using aplay -l and then the solution goes from there.
I'm using 64bit Ubuntu 9.10 and my sound card is not working. I'v tried to install oss drivers, but there is no effect.
View 1 Replies View RelatedWorks fine when I have the laptop plugged into the mains and will happily switch from 3.5mm to speakers and back again.
But for some reason, when the laptop is on battery I don't get any sound and all, from the 3.5mm or the speakers.
Samsung Q430 laptop
Ubuntu 10.10 x64 (fully up-to-date)
After the last updates (in which there was also the 2.6.35.28 kernel) my audio isn't working anymore. When i open an audio file, it goes foreward with steps like 5 secondos and i can't listen nothing. Videos i can see, but with no audio, and ..... videos go at like 2x speed (and also here no audio). I tried booting with the 2.6.35.27 kernel, but doesn't change anything.
View 1 Replies View Relatednow half of the speakers plug is stuck in the back of my PC. cant get it out, because it's very deep. i decided to use the front jack for sound but it wont work.already tried alsa mixer and upgraded my kernel.i think the problem is that i need to somehow kill the jack in the back of PC because its still alive and sending signals to that half-dead jack
View 1 Replies View RelatedI'm running Ubuntu 10.10 with an EVGA nForce 730i Intel mobo with onboard HDMI. Video output works. Audio output does not. I'm trying to output both to a Samsung HDTV.
I tried booting to a bootable drive with Ubuntu 11.04, and no audio.
I've essentially tried everything in every other thread. I'm using alsa mixer, I've muted S/PDIF, my settings all have HDMI output selected.
sudo modprobe snd-hda-codec-nvhdmi results in:
Code:
aplay -l results in:
Code:
aplay -L results in:
Code:
Also tried aplay -D to play a .wav, and heard no sound, but also encountered no errors.
Okay, when I load epsxe it loads just fine and I got it playing playstation games BUT the audio doesn't work. I have this issue with Basilisk II and it never got solved. When I load the epsxe executable I get
Quote:
When my computer is going down for hibernation (ram2disk) he safes the session corretly to the disk and the statusbar reaches 100%, but the computer and screen leaves on. Maybe some acpi troubles?
It is just that the computer won't switch off so that I have to press the OnButton 3sec. When I start again the session is sucessfully restored.
I recently installed Ubuntu on my HP Pavilion dv4-2012br and am really enjoying it, except that it is conflicting with my sound card. The only way I can hear some sound is going into System> Preferences> Sound> Output and selecting "Internal analog stereo audio" which makes the sound hollow and not at all pleasant to listen to music. When I mark "RS880 audio device [Radeon HD 4200] Digital Stereo (HDMI)" the sound is not played.
I followed step by step these instructions: [URL] yet the only way to run the audio through the "Internal analog stereo audio. "
Just adding: I used the "Install with Synaptic Package Manager" way to do it. And i'm using a desktop version of Ubuntu.
Here are some screenshots:
[URL]
after using Gnome on my 11.3 system I wanted to go back to KDE4. So I installed the patterns and now I can choose it from gdm and it works fine. But if I also try to use kdm, nothing works. I see the kdm login screen without any users. Autologin isn't set in system settings. Any idea how to reset all the kdm settings to default? KDM Screenshot (oxygen theme):
View 8 Replies View RelatedI am having trouble trying to figure out how to switch over to Ubuntu. I have downloaded the OS to my computer but can't figure out how to put it on my USB flashdrive as directed. It shows how use your USB flashdrive using Windows, Mac and Ubuntu but when I read the instructions for Ubuntu, opensuse does not have the program Startup Disk Creator.
View 9 Replies View RelatedI've used this video conferencing web app on Windows 7 and it works perfectly. [URL] But I'm having flash problems. Flash doesn't load and the light at my webcam doesn't switch on at all. Things to note:Cheese works so I know my webcam in Ubuntu is functional. I've tried purging the flash plugin and reinstalling it. It doesn't work on Chrome and Firefox so it's definitely only a flash problem. I'm not using any medication so I know it isn't me just imagining it. EDIT: I checked out [URL] Here's a screenshot: [URL] I'll check back later, Charlie the Unicorn just rang my doorbell and invited me to tea on the magic hot air balloon. Definitely not hallucinating. Definitely. Definitely.
View 9 Replies View RelatedI want to listen to this audio file: [URL] but my real player 11.0.0.4028 gold desn play it, it says that there is a codec 28_8 missing, I go to relaplayer page, download the last release available for linux systems, but the message is the same : audio codec missing and doesn't play the audio.
I havev tried to play the audio with smplayer (not luck), vlc can play the audio but the pause button doesn't work so I have to listen the entire audio all the time I stop it playing. Is there any audio player capable od reproducing in the proper way this audio in ubuntu? No one of my video players totem, smplayer, realplayer or vlc are capable of playing this video: [URL]