Following instructions here: [URL] However, when I hit test in the audio settings I get an error saying it doesn't work. And when I try to load the installer exe I get the following error:
View 3 RepliesI'm using 64bit Ubuntu 9.10 and my sound card is not working. I'v tried to install oss drivers, but there is no effect.
View 1 Replies View RelatedAfter the last updates (in which there was also the 2.6.35.28 kernel) my audio isn't working anymore. When i open an audio file, it goes foreward with steps like 5 secondos and i can't listen nothing. Videos i can see, but with no audio, and ..... videos go at like 2x speed (and also here no audio). I tried booting with the 2.6.35.27 kernel, but doesn't change anything.
View 1 Replies View Relatednow half of the speakers plug is stuck in the back of my PC. cant get it out, because it's very deep. i decided to use the front jack for sound but it wont work.already tried alsa mixer and upgraded my kernel.i think the problem is that i need to somehow kill the jack in the back of PC because its still alive and sending signals to that half-dead jack
View 1 Replies View RelatedI'm running Ubuntu 10.10 with an EVGA nForce 730i Intel mobo with onboard HDMI. Video output works. Audio output does not. I'm trying to output both to a Samsung HDTV.
I tried booting to a bootable drive with Ubuntu 11.04, and no audio.
I've essentially tried everything in every other thread. I'm using alsa mixer, I've muted S/PDIF, my settings all have HDMI output selected.
sudo modprobe snd-hda-codec-nvhdmi results in:
Code:
aplay -l results in:
Code:
aplay -L results in:
Code:
Also tried aplay -D to play a .wav, and heard no sound, but also encountered no errors.
i just upgraded from Skype 2.0.0.72 to 2.1.047. Now my microphone isn't working anymore and i cannot select it in the skype options. From now on i can only select the PulseAudio server ..
So i have read some howtos for PulseAudio. They say i should starte PulseAudio Volume Control. ok.. Now i should go to the tab "Recording". This tab doesnt exist on my pc. I upgraded to the latest version of this volume control. It still doesnt exist.
I am using OpenSuse 11.0 with KDE4.3
Here are some screenshots:
[URL]
PS: My mic is still working with applications, that dont use pulseaudio.
I recently installed Ubuntu on my HP Pavilion dv4-2012br and am really enjoying it, except that it is conflicting with my sound card. The only way I can hear some sound is going into System> Preferences> Sound> Output and selecting "Internal analog stereo audio" which makes the sound hollow and not at all pleasant to listen to music. When I mark "RS880 audio device [Radeon HD 4200] Digital Stereo (HDMI)" the sound is not played.
I followed step by step these instructions: [URL] yet the only way to run the audio through the "Internal analog stereo audio. "
Just adding: I used the "Install with Synaptic Package Manager" way to do it. And i'm using a desktop version of Ubuntu.
Here are some screenshots:
[URL]
I want to listen to this audio file: [URL] but my real player 11.0.0.4028 gold desn play it, it says that there is a codec 28_8 missing, I go to relaplayer page, download the last release available for linux systems, but the message is the same : audio codec missing and doesn't play the audio.
I havev tried to play the audio with smplayer (not luck), vlc can play the audio but the pause button doesn't work so I have to listen the entire audio all the time I stop it playing. Is there any audio player capable od reproducing in the proper way this audio in ubuntu? No one of my video players totem, smplayer, realplayer or vlc are capable of playing this video: [URL]
I'm trying to extract files off of an audio CD using the program that came with Ubuntu. In the preferences I set the format to FLAC but when it's done and I open up the file manager, all the files are mp3. When I try to play the file with Songbird it tells me it can't read the codec. What's going on? I've extracted the music off of CDs before.
View 6 Replies View Relatedwhenever i oped an audio program, it doesn't work. for example in ardour it says, "JACK is running as another user".I think this is the problem for most of them.I searched for JACK and found a folder and it says the user's name is root.
View 1 Replies View Relatedhappened and now half of the speakers plug is stuck in the back of my PC. cant get it out, because it's very deep. i decided to use the front jack for sound but it wont work.already tried alsa mixer and upgraded my kernel. i think the problem is that i need to somehow kill the jack in the back of PC because its still alive and sending signals to that half-dead jack
View 2 Replies View Relatedyou have an onboard soundcard that you have or may not have disabled in the BIOS, and you intend to use headphones with a USB sound card with headphone and microphone jacks (or no mic jack, it doesn't matter), but you notice that the headphones are detected. Alsamixer provides an interface to control the volume, etc etc, but still the headphones do not work..In my case, the module snd_hda_intel was being loaded for my onboard soundcard that I had disabled in the BIOS before booting the computer for the first time, and even though I tried to "activate" the USB headset in alsamixer, I still couldn't get the headset to work.
Solution as a trial: Open a terminal, and look to the code section for what you need to type.A big missing key to my puzzle is how to simply restart and/or reload a module so that it isn't necessary to unplug and plug back in the USB device. Can't I just re-discover the USB devices? (or other such hardware, such as a PCI card, or otherwise inaccessible component?)
Works fine when I have the laptop plugged into the mains and will happily switch from 3.5mm to speakers and back again.
But for some reason, when the laptop is on battery I don't get any sound and all, from the 3.5mm or the speakers.
Samsung Q430 laptop
Ubuntu 10.10 x64 (fully up-to-date)
Ubuntu insists on using movie player as the default for audio files. I would like to use VLC. VLC doesn't show up on the list as preferred applications for multimedia. I tried using custom with vlc %u but it doesn't work.
View 3 Replies View RelatedI've seen this problem on dozens of different forums but I haven't found anybody with my specific problem or a solution that has worked. I have an nVidia GeForce 8400GS which I just installed in my Debian box and I can't get the HDMI audio to work. Kernel version is 2.6.32-5-amd64, nvidia driver version is 260.19.36, alsa version is 1.0.21. Output of lsmod shows that nvidia module is loaded. Output of aplay -l code...
I feel like I've looked everywhere on the internet for a solution to this and I just can't find one. It seems that everybody is able to see their nVidia audio device using aplay -l and then the solution goes from there.
I have a small audio problem: the Audio that exists from the back of my PC is working like a charm, but the one that cames out from the Frontal output doesn't work at all. It works well on OpenSuse 11.2, but it's not working on opensuse 11.3.
View 9 Replies View RelatedOkay, when I load epsxe it loads just fine and I got it playing playstation games BUT the audio doesn't work. I have this issue with Basilisk II and it never got solved. When I load the epsxe executable I get
Quote:
I'm using 'Adobe Flash plug-in 10.3.183.4ubuntu0.11.04.1', installed from the package repos on kubuntu, and since the last update, it has broken all flash functionality in both rekonq and firefox.I have tried removing and reinstalling the package multiple times, both with and without the browsers open. Can anyone suggest a way to restoring functionality?
View 7 Replies View RelatedI am using open -suse 11.1 .During start up I am getting notification such that,The audio playback device HDA intel (ALC888 Analog) does not work falling back to default.
View 2 Replies View RelatedI'm not able to configure my microfone. Audio works very well. HW it's OK, mic works well on windows. Recording WAVE 'foo.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
Plug PCM: Linear conversion PCM (S32_LE)
Its setup is:
stream : CAPTURE
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
[code]...
I tried to make a copy of my Audio CD and it asked me to install some plugins, so I installed them. After installing them, it still doesn't copy any audio cd. Can someone tell me how to fix this problem, because GnomeBaker takes long time to copy an audio cd.
View 1 Replies View RelatedI'm trying to record the beautiful music of rai-tv. Sadly to say it onlyings me audio-files with no sound at all. Ps. In "alsamixer" everything is on 100%
View 1 Replies View Relatedhow to make creative web cam working with ubuntu
View 1 Replies View RelatedWhen I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
I'm struggling to get the native Spotify on Ubuntu 10.10 working. I haven't tried it on any other version so I'm not sure if it's exclusive to 10.10.
Basically, the application loads fine, until I hover over to the left-hand side bar (playlists etc), at which point it crashes and *poof* instantly closes down.
Additional Notes: Output from terminal:
how to use Spotify with my USB DAC. In MOC, Audacious etc it works great because I can configure what soundcard to use. Spotify only uses my laptops internal soundcard. Anybody have an idea how I can solve this?
View 1 Replies View RelatedI just installed ubuntu on top of my windows xp on my laptop. I've got all the files I need to play mp3's i think. I'm using rhythmbox music player and the track play but I get no sound. Is there a better mp3 player out there?
View 2 Replies View RelatedI am on Ubuntu 10.10 (upgraded from 10.04). And I can't get the audio to work, (it wasn't working on 10.04 either) I tried all the different settings in "Sound Preferences".
I tried running ALSA Upgrade Script, it downloaded (sudo bash AlsaUpgrade-1.0.23-2.sh -d) but when I tried to compile (sudo bash AlsaUpgrade-1.0.23-2.sh -c) it said
Code:
alsa-driver-1.0.23 make failed
Here's the output of aplay -l
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC1200 Analog [ALC1200 Analog]
Subdevices: 1/1
[Code].....
I have seen already many post about my same problem but the suggestions have not been enough in my case .
I have Ubuntu 10.10, I run spotify through wine, but i receive the message saying can't play the music. I already ticked only ALSA, only OSS, both, I followed the other instructions for the audio tab ( Emulation, 44100 and 16 ), I reinstalled it as well, but nothing to do.
Basically as it says in the title. The second to last update about 6 or 7 weeks ago broke Spotify native. I get the following error message in the terminal:
[Code]....