OpenSUSE Multimedia :: Switch Between Pulse Audio ALSA OSS Etc In 11.2
Nov 22, 2009switch between Pulse Audio ALSA OSS etc in 11.2
View 5 Replies
ADVERTISEMENT
OpenSUSE Multimedia :: Switch - Pulse Audio ALSA OSS Etc In 11.2 ?
Mar 4, 2011switch between Pulse Audio ALSA OSS etc in 11.2
View 1 Replies View RelatedUbuntu Multimedia :: Skype Disconnects From Pulse Audio ( Alsa ) On 10.04?
Feb 2, 2011When using Skype, the sound suddenly stops working, both ways (about 4-5 min into the communication). The message "connection failed: connection terminated" is displayed and when I click OK, Pulse Audio closes and Skype freezes. Actually, and I just realized this, the sound suddenly stops working on Firefox as well. (The Alsa plugin in Pulse Audio 'Playback' just disappears). However this occurs after a long period of use. I've just watched about 30 continuous minutes of live soccer through Espn3, before the audio stopped working. No message was displayed though, and just refreshing the page fixed it.
All this makes me think this is some type of Alsa-Pulse Audio problem. I really don't understand well what they are, although I believe Alsa is a driver and Pulse Audio a sound server? Sorry, I started using Linux very recently. I am using Ubuntu-Studio 10.04 and the rt Kernel (2.6.33-29-realtime). Sometimes I use Pulse Audio in Jack and vice-versa, using pactl load-module module-jack-sink and source respectively, but my problem seems to occur even if I unload the modules before using Skype. I believe all this started happening after I started using the rt kernel and/or the module-jack-sink/source.
Ubuntu Multimedia :: Get Mplayer To Recognize ALSA And / Or Pulse Audio Server
Jan 4, 2010I'm trying to get mplayer to recognize ALSA and/or pulse audio server, preferably both. On my laptop, mplayer works fine -- mplayer -ao help lists oss, alsa, pulse, and jack, among others. But here's the output of mplayer -ao help on the computer I'm trying to set up:
[Code].....
ALSA and pulse are both installed, and pulse is running -- ps -A | grep pulse gives: 3627? 00:00:00 pulseaudio Yet, mplayer fails to realize this. I'm sure I'm doing something wrong that's really simple...but what?
OpenSUSE Hardware :: Microphone - Alsa - Pulse Audio - Can't Record Anything
Apr 8, 2011I have some microphone problems. I can't record anything. (I'm using openSUSE 11.3)
My sound card was detected almost correctly (at least the chip-set was i think). I have an Asrock motherboard (k7upgrade880, with a Southbridge: VIA 8237 | Audio: CMedia CMI9761 6 channel AC'97.
I ran these commands so far with these results - while i was following the audio troubleshooting guide (SDB:Audio troubleshooting - openSUSE
But i have NO audio playback problems - movies, games, music all play well. And the Microphone guid has a broken link
I tried to change my 50-sound.conf file (i read it on a forum, I'm new to linux troubleshooting) from this:
options snd slots=snd-via82xx to this: options snd slots=snd-via82xx position_fix=1
But that did not work either. I did not get any sound with the last line.
Debian Multimedia :: Switch From Mate-volume-control To Pulse Audio Mixer?
Jun 20, 2015I'm using Mate on Jessie. The problem is that mate-volume-control kinda sucks as an audio control. It doesn't have nearly enough options for a proper volume control program. Pulse is much better for my needs. It or Alsa. Is it possible to remove mate-volume-control, or at least make Pulse the default volume control?
View 5 Replies View RelatedOpenSUSE Multimedia :: 11.1 Updates To Pulse Audio In Gnome Improve Audio Functionality ?
Oct 17, 2010I'm thinking of installing openSUSE-11.1 Gnome on a Fujitsu-Siemens Amilo 7400M laptop because the wireless in Gnome is much more user friendly than KDE3/KDE4 in openSUSE-11.1. The idea is to give this laptop to my 84-year old mother and things need to 'just work' for her (she currently has a desktop running openSUSE-11.1 KDE3 that uses a WIRED interface to the web).
I refuse to update this laptop to openSUSE-11.2 nor 11.3 (nor other recent distributions) because every kernel update after the 2.6.27 kernel has broken the Intel i855GM graphics drivers for that laptop. There are many bug reports and none have fixed the problem for this Fujitsu-Siemens implementation of the i855GM graphics.
Hence I am looking at Gnome.
I booted the laptop to a Gnome openSUSE-11.1 liveCD and wireless is easy and works great. But audio is very very VERY bad. It is incredibly user unfriendly and it does NOT work well. I assume that is because pulse audio in openSUSE-11.1 was very immature.
I note these updated packages in the openSUSE-11.1 update repository:
Code:
So my question is, did the updates to pulse audio (in the openSUSE-11.1 update repository) fix the pulse audio situation? Are there ANY helpful views on this?
Currently my wife is using this laptop with KDE-4.4.4 (and openSUSE-11.1) so I can't just install Gnome and play with it without taking the laptop away from her for a while (note the hard drive is too small for a dual boot of KDE/Gnome).
OpenSUSE Multimedia :: Sound Conflict Pulse And Alsa// Error Messages?
Apr 26, 2010could not get my sound to operate so i followed the intructions toMulti-media and Restricted Format Installation Guide - openSUSE Forumsnow i have a working audio and video player but my sound is depreciated to an almost inaudible levelwhen i try to open pulse i get connection failed:connection refusedand when i try alsa gui i get function snd_ctl_open failed for default:connection refusedcan anyone please correct this with me or for me. Noob wanting not to regret leaving windows
View 9 Replies View RelatedOpenSUSE Multimedia :: Pulse Audio - Microphone Doesn't Work
Dec 13, 2009i just upgraded from Skype 2.0.0.72 to 2.1.047. Now my microphone isn't working anymore and i cannot select it in the skype options. From now on i can only select the PulseAudio server ..
So i have read some howtos for PulseAudio. They say i should starte PulseAudio Volume Control. ok.. Now i should go to the tab "Recording". This tab doesnt exist on my pc. I upgraded to the latest version of this volume control. It still doesnt exist.
I am using OpenSuse 11.0 with KDE4.3
Here are some screenshots:
[URL]
PS: My mic is still working with applications, that dont use pulseaudio.
OpenSUSE Multimedia :: Can I Remove Pulse Audio To Fix Glitchy Sound
Apr 11, 2011I hear Pulse Audio is the culprit of all the sound issues. I would like to remove it, and default to straight ALSA or whatever distros like Fedora and Ubuntu use, which has never been problematic for me.
View 9 Replies View RelatedOpenSUSE Multimedia :: Tune Audacity Recording With Pulse Audio?
Jun 18, 2011I'm trying to capture audio from a stream, NOT from the mic. This is what I'm doing: Start Audacity, push its record button, play a song. It shows that it is recording but when I play back the results, all background noise, conversation, etc, is in the recording as well as the audio from the song. If the mic is unplugged, I cannot record what I hear coming from the sound card (as in what you hear from the sound card is what you get). I got directions on how to do what I want here ( Looking (maybe) for audio mixer for use with Pulse Audio - Page 2 Posts # 4 and 5) but it's not permanent. I got the instructions in post #11 from that same page to make such a change permanent. I tried using the instructions to make the change permanent (I backed up my default.pa just in case something went wrong) and these are the changes I had made:
Code:
### Load audio drivers statically (it's probably better to not load
### these drivers manually, but instead use module-hal-detect --
### see below -- for doing this automatically)
#load-module module-alsa-sink
[code]....
OpenSUSE Multimedia :: Redirect Input To Output Pulse Audio?
Aug 2, 2011I have a TV card connected to my Dish box, and I would like to use it on my computer. The tv card works fine, and the audio is connected to my line in. The audio card receives the audio signal, and I can set the volume and record it without any problem, but I can't get it to redirect to an output in order to hear the sound. I have been battling with this issue since a kernel update back when 11.2 was about to come out. Back then, the alsa mixer had an option called audio loop-back, which did the trick. Since I know I ca record the audio and play it back without any problem, is there an application that can do this automatically and simultaneously?
View 1 Replies View RelatedUbuntu Multimedia :: Alsa Works - But Not Pulse
Jan 27, 2011This is a fresh install of 10.10 (although I had the problem on 10.04 as well). I have installed MythTV on here (via apt-get, its not MythBuntu), and use the system primarily for that. Myth works great, sound in everything, no problems.
However, not much else can play sound. Firefox (.....), totem, mplayer, all nothing. Either just no sound or crash. If I can set them to use Alsa (eg: VLC), then they work.
System is an Asus P5B and on-board sound. I've also got an Nvidia GT210 and would like to use the HDMI out, but can't get anything at all to go through this. Don't know if thats related or not. Sound problems existed before adding the GT210.
One strange thing is, I can go into Preferences -> Sound -> Hardware and click "Test Speakers". Of course nothing plays. However, if I then set the onboard card to "Off", and then back to "Analogue Stereo Duplex", then click "Test Speakers", the left speaker works (right is still silent). But from then on, Pulse apps can play sound, until next reboot. Having FF open on a ..... video or something similar prevents Myth from playing sounds however.
What can I do to get sound working sanely? I don't need optical out, surround or anything. Simple stereo will be fine at this point, via either the onboard or the GT210.
OpenSUSE Multimedia :: Updated ALSA For Add Bass Speaker Switch For HP Dv7?
Apr 10, 2010I would like your input please. I'm using an HP DV7 laptop and the sound works under Opensuse 11.2 but without base. I have therefore updated ALSA to version 1.0.22.1 to make use of the introduced base switch for DV7 (ALSA changelog here)
I have tried these ALSA options but without any change / improvement to the base sound.
options snd-hda-intel=hp-dv5 and also hp-dv7 and hp_dv7
options snd-hda-intel enable_msi=1
Any ideas?
The second line stops the sound from "stuttering" but the first seem to have no effect.
Debian Multimedia :: Removing Pulse And Installing Alsa On Squeeze?
Feb 18, 2011I want to remove pulse and install alsa instead but I can't seem to be able to do it. I tried to search for all packages with "pulse" in their names and purging them but it didn't work because aptitude wanted to remove all of the packages that used pulse with along with pulse.
View 2 Replies View RelatedUbuntu Multimedia :: Karmic + ALSA - Pulse. Playback Works, But Not Record?
Jan 20, 2010I have upgraded from 9.04 to 9.10. Both playback and record were working using only ALSA. Karmic installed PulseAudio. Looking around the forums I found a post on how to update to the latest ALSA driver (+ lib + utils) and remove pulse to take it out of the equation. With or without pulse I cannot get record working. For work I need to use my laptop as a softphone. I've tested my headset on another machine - headphones and mic both work. Any suggestions on how to resolve this would be greatly appreciated. I have a Thinkpad T61P. Below is the output of some hopefully useful commands ...uname -aLinux moes 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 i686 GNU/Linux
lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
[code]....
Ubuntu Multimedia :: Sound Doesn't Work After Switching From Pulse To ALSA
Oct 16, 2010I have made a pretty sizable mistake. I was trying to figure out why my game was having sound issues when I was told to update my sound drivers. After a bit of searching, I came across this website. I downloaded and ran the script in the first link. Minor problem: I was using PulseAudio, not ALSA. Needless to say, the script didn't work. After the machine rebooted, I had no sound at all. I was planning on switching to ALSA anyway, so I found this thread and ran the following commands:
[Code]....
Ubuntu Multimedia :: AC3 Passthrough Pulse/Alsa/XBMC - Acer Aspire Revo?
Jun 16, 2010Is it possible to install XBMC onto Ubuntu Lucid and still have passthrough audio to a connected receiver (i.e. a workaround with Pulse)? I have an Acer Aspire Revo R1600 connected via HDMI to my Onkyo reciever. I am able to get desktop sounds and play MP3 files from XBMC, but passthrough has been a bear. If I tell Pulse that my sound device is analog, for some reason I can get XBMC to pass through audio. However, I would like to keep system sounds and have the passthrough ability if it's possible. As I understand it (from about two weeks of fidgeting) this is a limitation of Pulse and it's lack of pass through support. It seems so simple. I've tried multiple different .asoundrc configirations none of which have gotten me there. I've upgraded Alsa. I'd rather not run XBMC live if I dont have to. I'd like to have the ability to have a workstation for when I need it. I've upgraded to the latest NVIDIA driver available from their website - 195.36.31.
View 9 Replies View RelatedUbuntu Multimedia :: Pulse Audio On Top At 100% Cpu Usage?
Mar 25, 2010I have Intel core 2 duo machine running Ubuntu Karmic 64-bit.
Whenever I play a mp3 on rythmbox and use the "top" command, the pulse audio is at top at 100%.
Is it trying to break my system just by running a mp3?
Is my system not able to detect two cores? or Whatever?
It's just unbearable.
Here is the output of top command:
Code:
laxman@Cray-Jaguar:~$ top
top - 20:36:50 up 2:00, 2 users, load average: 0.71, 0.45, 0.45
Tasks: 162 total, 2 running, 160 sleeping, 0 stopped, 0 zombie
Cpu(s): 3.0%us, 48.4%sy, 0.0%ni, 48.6%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 2055676k total, 1778616k used, 277060k free, 100396k buffers
[Code].....
Ubuntu Multimedia :: Pulse Audio 100% CPU Usage?
Feb 11, 2011I am using Linux mint Debian Version 64 bit.What may be the fix?? I attached the image.
View 1 Replies View RelatedUbuntu Multimedia :: Redirect Pulse Audio Through Ssh?
May 20, 2011I would like to redirect pulseaudio sound through ssh to a local client while seeing content through a vnc connection. Something like this:
Client: ssh -L 5901:localhost:5901 user@server.net
Client: vncviewer localhost:5901
Server: Run a web browser with flash content on the server through vnc, but sound is redirected to the client.
A good example is Facebook flash games, most flash games require flash player 10 but my local client only supports up to version 9 because of the architechture.
Why? A number of reasons:
- The local client is not powerful enough to run flash content
- The local client has an architechture that flash does not support, eg ARM, PowerPC, etc.
- Save battery power - use the resources of a server instead of the client.
Environment:
Both the client and server have pulse audio installed and working. The server does not have a physical sound card installed but the client does.
Server: Ubuntu 10.04
Client: Ubuntu 10.10
I have tried these links so far: [URL]
Ubuntu Multimedia :: Pulse Audio Multiple Outputs?
Apr 3, 2010I've searched and searched and can't find a straight answer about this. I want to sent the same signal out of the digital output and one of the analog outputs on the soundcard (Intel HDA) on my motherboard. I'm using ALSA and Pulse Audio.
View 5 Replies View RelatedOpenSUSE :: Pulse Audio Libraries Are GONE?
Mar 20, 2010I have no Pulse Audio libraries anymore...not sure how they got deleted. Sound is working fine though....I wasn't using Pulse to begin with, but don't understand what happened to them....think they got deleted in going to KDE 4.4.1 rel 228 today. Should I have those libraries installed for any reason? If so, what should I install?
PS: If I go to Yast, under multimedia, I know longer see Pulse as an option...only hda_snd_intel or whatever
OpenSUSE Multimedia :: Alsa Based Software Multi-band Graphic Audio Frequency Equalizer That Works With 11.x?
May 15, 2010Does anyone know of an alsa based software multi-band (10 or more) graphic audio frequency equalizer that works with Suse 11.x? To be clear, I don't mean an equalizer within an audio or video player. One that can be used with any sound application, that works between the output of the player and the output plugs on a motherboard or sound card.
View 9 Replies View RelatedUbuntu Multimedia :: High CPU Load On Skype With Pulse Audio
Jul 16, 2010Just noticed that during calls skype uses ~30-50% cpu, + pulseaudio uses ~20%. I found some old threads on this like [URL] Or [URL]. The former suggests to purge pulse and use alsa/oss instead. The latter suggests changing mic in skype to DeviceXX and tweak the pulse.conf
There's also a launchpad bug on that with status Confirmed->invalid (due to "problem fixed in skype 2.1 beta") but looks like it's not (I am using 2.1 beta)
1. Does any1 has this problem?
2. I can't try 2nd link's approach as my skype has only PulseAudio in the settings, so I can't select Device or anything else!
3. Should I try to remove pulse in favor of ALSA? I'm pretty happy with pulse otherwise that this issue, I use it to record sound out of my sound card and I'm not sure if I can do this with alsa/os.
OpenSUSE :: Can't Find Pulse Audio Equalizer
May 14, 2010I was looking for the Pulse Audio equalizer in the repos and saw that it wasnt there? All the other Pulse Audio stuff is there but not the Pulse Audio equalizer?
View 9 Replies View RelatedUbuntu Multimedia :: Pulse-audio Just Doesn't Give Enough Output / Resolve This?
Mar 4, 2010I have Ubuntu 9.10 installed but the sound is way below normal..
Pulse-audio just doesn't give enough output..
Max output is just average...
I have a 945 Intel chipset..
Ubuntu Multimedia :: Pulse Audio Volume Controller: Stop It From Changing Settings?
Jun 12, 2010I'm still working on ubuntu 9.10 with an acer aspire 1810tz. To use my microphone I found out that I have to change my microphone settings because it's mono and the default setting is thinking it's stereo: With the Volume Controller I setup one chancel to 5 and the other to 90 and the mic is working fine. Starting Skype and using it I see that the setting is reducing the volume for the mic below 20, so nobody can hear me. I tried closing first Volume Controller and then starting Skype, no matter the volume of the mic is reduced. How do I stop this behavior?
View 2 Replies View RelatedOpenSUSE Hardware :: Pulse And ICE1712 Chipset / M Audio 1010LT In OS 11.4 Not Working
Jul 7, 2011Looks like Pulse is the cause of another problem with the ICE1721 chipset (when will this madness end!!). Anyways I have a pulseverbrose.log file that I'll pastebin here: Ubuntu Pastebin Also results of /usr/sbin/alsa-info.sh are here: Ubuntu Pastebin The symptoms are:
1. with Pulse I can play a guitar through inputs 1&2 and hear the output, but can not play any pgms like Banshee at all.
2. After "killall pulseaudio" I can then play Banshee but no external inputs, like a guitar.
The sys:
1. OpenSuse 11.4
2. 2.6.37.6-0.5-default Kernel
3. pulse-0.9.22
4. cat /proc/asound/version=Advanced Linux Sound Architecture Driver Version 1.0.23
5. Advanced Linux Sound Architecture Driver Version 1.0.23=alsa-1.0.24.1-4.7.1.i586, alsa-utils-1.0.24.2-3.1.i586, alsa-firmware-1.0.24.1-3.1.noarch
I'll update this post with more info as I get into it further..
Ubuntu :: Use ALSA Without PULSE ?
Sep 13, 2010I was just wondering if there was a way to use ALSA without PULSE, PULSE AUDIO is causing my Skype to crash continually.
I entered the following command into terminal- sudo apt-get remove --purge pulse-audio
Now my system has no sound at all, soundcards are detected in aplay -l, but unfortunately when i go to sound properties it just says waiting for sound system to respond.