Ubuntu Multimedia :: Audio Doesn't Work Anymore After Updates - 10.10

Mar 19, 2011

After the last updates (in which there was also the 2.6.35.28 kernel) my audio isn't working anymore. When i open an audio file, it goes foreward with steps like 5 secondos and i can't listen nothing. Videos i can see, but with no audio, and ..... videos go at like 2x speed (and also here no audio). I tried booting with the 2.6.35.27 kernel, but doesn't change anything.

View 1 Replies


ADVERTISEMENT

Ubuntu Multimedia :: Dual Head Doesn't Work Anymore In Lucid?

May 9, 2010

Upon upgrading to Lucid from Karmic, my dual head setup doesn't work anymore with the new 2.6.32 kernel. In the previous kernel 2.6.31, everything works as expected (also when I boot Lucid with that kernel). On 2.6.32, the only thing I get is two clones. Is there some new type of configuration required that I missed or should I still compile some new kernel module???

My card:

Code:
rogier@rogier-desktop:~$ lspci |grep VGA
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 If [Radeon 9000] (rev 01)
My xorg.conf, which worked fine on Karmic:
Code:
Section "Monitor"

[Code]...

View 4 Replies View Related

Debian Multimedia :: CTRL-ALT-F* Doesn't Work Anymore To Switch To Console?

Jan 26, 2010

not sure exactly when this broke, but for some reason I'm not able to use CTRL-ALT-F1 anymore to fall back to the first virtual console.I can kill X with CTRL-ALT-BACKSPACE just fine, but I'd like to be able to get a normal shell to kill things when I've messed too much with graphical stuff.

View 4 Replies View Related

OpenSUSE :: Several Programs Doesn't Running Anymore After Some Updates?

Jun 26, 2010

Installed version are:openSuse 11.2KDE 4.4.4After installing some upates does my firefox will not starts anymore. And I have no idea why. It's seems not really a problem with firefox itself, because some other programs can't be started as well. Such as eclipse or Googles ChromeIt's appears only for few secounds the program in the task bar, and disappears then. Is there some log file or something like this, there I could see what happens in the start procedure of the firefox program

View 3 Replies View Related

Ubuntu Multimedia :: Spotify 10.10 - Audio Doesn't Work

Dec 4, 2010

Following instructions here: [URL] However, when I hit test in the audio settings I get an error saying it doesn't work. And when I try to load the installer exe I get the following error:

View 3 Replies View Related

Ubuntu Multimedia :: M-Audio Delta 1010LT Doesn't Work?

Apr 4, 2010

I'm using 64bit Ubuntu 9.10 and my sound card is not working. I'v tried to install oss drivers, but there is no effect.

View 1 Replies View Related

Ubuntu Multimedia :: Front Audio Jack Doesn't Work

Apr 20, 2011

now half of the speakers plug is stuck in the back of my PC. cant get it out, because it's very deep. i decided to use the front jack for sound but it wont work.already tried alsa mixer and upgraded my kernel.i think the problem is that i need to somehow kill the jack in the back of PC because its still alive and sending signals to that half-dead jack

View 1 Replies View Related

Ubuntu Multimedia :: Onboard HDMI Audio Doesn't Work

Aug 5, 2011

I'm running Ubuntu 10.10 with an EVGA nForce 730i Intel mobo with onboard HDMI. Video output works. Audio output does not. I'm trying to output both to a Samsung HDTV.

I tried booting to a bootable drive with Ubuntu 11.04, and no audio.

I've essentially tried everything in every other thread. I'm using alsa mixer, I've muted S/PDIF, my settings all have HDMI output selected.

sudo modprobe snd-hda-codec-nvhdmi results in:

Code:

aplay -l results in:

Code:

aplay -L results in:

Code:

Also tried aplay -D to play a .wav, and heard no sound, but also encountered no errors.

View 9 Replies View Related

OpenSUSE Multimedia :: Pulse Audio - Microphone Doesn't Work

Dec 13, 2009

i just upgraded from Skype 2.0.0.72 to 2.1.047. Now my microphone isn't working anymore and i cannot select it in the skype options. From now on i can only select the PulseAudio server ..

So i have read some howtos for PulseAudio. They say i should starte PulseAudio Volume Control. ok.. Now i should go to the tab "Recording". This tab doesnt exist on my pc. I upgraded to the latest version of this volume control. It still doesnt exist.

I am using OpenSuse 11.0 with KDE4.3

Here are some screenshots:

[URL]

PS: My mic is still working with applications, that dont use pulseaudio.

View 4 Replies View Related

Ubuntu Multimedia :: Rs880 Audio Device[Radeon HD 4200] Doesn't Work

Dec 27, 2010

I recently installed Ubuntu on my HP Pavilion dv4-2012br and am really enjoying it, except that it is conflicting with my sound card. The only way I can hear some sound is going into System> Preferences> Sound> Output and selecting "Internal analog stereo audio" which makes the sound hollow and not at all pleasant to listen to music. When I mark "RS880 audio device [Radeon HD 4200] Digital Stereo (HDMI)" the sound is not played.

I followed step by step these instructions: [URL] yet the only way to run the audio through the "Internal analog stereo audio. "

Just adding: I used the "Install with Synaptic Package Manager" way to do it. And i'm using a desktop version of Ubuntu.

Here are some screenshots:

[URL]

View 9 Replies View Related

Fedora :: After The Installation Of XFCE The Audio Does Not Work Anymore?

Jun 9, 2011

I'm using Fedora 15, I have installed XFCE and now I do not have audio in both XFCE and Gnome. The external DAC is found but does not emit a sound.

View 2 Replies View Related

OpenSUSE Multimedia :: 11.1 Updates To Pulse Audio In Gnome Improve Audio Functionality ?

Oct 17, 2010

I'm thinking of installing openSUSE-11.1 Gnome on a Fujitsu-Siemens Amilo 7400M laptop because the wireless in Gnome is much more user friendly than KDE3/KDE4 in openSUSE-11.1. The idea is to give this laptop to my 84-year old mother and things need to 'just work' for her (she currently has a desktop running openSUSE-11.1 KDE3 that uses a WIRED interface to the web).

I refuse to update this laptop to openSUSE-11.2 nor 11.3 (nor other recent distributions) because every kernel update after the 2.6.27 kernel has broken the Intel i855GM graphics drivers for that laptop. There are many bug reports and none have fixed the problem for this Fujitsu-Siemens implementation of the i855GM graphics.

Hence I am looking at Gnome.

I booted the laptop to a Gnome openSUSE-11.1 liveCD and wireless is easy and works great. But audio is very very VERY bad. It is incredibly user unfriendly and it does NOT work well. I assume that is because pulse audio in openSUSE-11.1 was very immature.

I note these updated packages in the openSUSE-11.1 update repository:

Code:

So my question is, did the updates to pulse audio (in the openSUSE-11.1 update repository) fix the pulse audio situation? Are there ANY helpful views on this?

Currently my wife is using this laptop with KDE-4.4.4 (and openSUSE-11.1) so I can't just install Gnome and play with it without taking the laptop away from her for a while (note the hard drive is too small for a dual boot of KDE/Gnome).

View 6 Replies View Related

Ubuntu :: Standby Doesn't Work Anymore?

Apr 26, 2010

I'm using Karmic since November and standby/sleep has always worked fine. Some weeks ago, it stopped working fine.

After a reboot, I can put the system in standby only once. If I try standby after that, the system seems to do a normal standby, but it resumes at the moment the fans would normally stop working.

I tried different things like the s2ram program, pmi action sleep, etc. I went to the BIOS and tried a number of things, one was succesfull: disable USB. When USB is disabled I can go into standby every time. When I enable USB again (even with no devices connected), standby only works once again.

So, how can I disable USB at the moment I go into standby?

View 1 Replies View Related

Ubuntu :: If Don't Use For A Week It Doesn't Work Anymore

Jun 22, 2010

If i use my Ubuntu some times per week, there isn't any problem. But if i don't use it for a short time (a week), when i want use it again and select it on GRUB.. after the first loading screen (on Ubuntu 10.04 the purple screen with Ubuntu in white and some points under), my screen is black. The computer screen is receiving signal because the led is green and not brown/orange like when is on standby mode. On Windows i haven't any problem.

First time it happened with Ubuntu 9.10. I didn't got solution for it and i format the partition and install the 10.04. But now it happen again with 10.04. I have an ATI 5770 and i have tried drivers since 9.12 till 10.4 (last ones the best i have had) On versions before 9.10 i had no problem, but i can't confirm that, because i had other graphic card (NVIDIA 9800GT). But the 5770 didn't work well on previous version so i updated to 9.10 and after this problem, updated to 10.04.

At spanish forum, people don't know solution for this problem, they never read about a similar problem. I hope you know a solution for it, because the only one i found and work is.. format and reinstall.

View 3 Replies View Related

Ubuntu :: 9.10 External Microphone Doesn't Work Anymore

Jan 14, 2010

Update 6th March 2010: Update to Kernel 2.6.31-20 SOLVED the problem. Recording works again (still wouldn't in kernels 2.6.31-17 to 2.6.31-19). If a kernel update doesn't solve your problem, please read post 14 on page 2 by Mocha which seems to have solved the problem for other users without updating the kernel

Update 8th February 2010 to Kernel 2.6.31-19 did not solve the problem, please also read post number 7 for more details.

Quick Conclusion for other users who might experience the same problem:

After an update to kernel version 2.6.31-17 in Ubuntu 9.10 Karmic Koala, my external microphone did not work anymore. Playback was possible, just recording would not work anymore, although there was quite some background noise in the headphones. This made it impossible for me to use Skype and/or Sound Recorder.

All the possible solutions offered below did not help in my case (although you might give them a try).

I switched back to kernel version 2.6.31-16 where the problem does not occur.

Output: cat /proc/asound/card0/codec#* | grep Codec

Realtek ALC662 rev1

I know there are lots of threads about this topic, but I have spent hours on this problem already and none of the solutions offered so far worked for me so I decided to start this thread.

I have been using Ubuntu 9.10 and so far, my external microphone worked flawlessly in Skype as well as in Sound Recorder. A few days ago, I received a call on Skype and all the guy on the other side could hear was loud noise. I can only play sound, but not record anymore (i.e. the microphone doesn't work anymore). I tried two different microphones just to be sure whether one was defective and also checked it in Windows (where they both work).

I am not sure what might have caused this problem, I just remember a kernel upgrade about that time (not sure whether this is the reason though). I use 2.6.31-17-generic now.

Here is what I have tried so far:

1) Right-click on the Sound Icon in the top right corner and checked the following: in the hardware tab, it is set to analog stereo duplex, input is set to internal audio analog stereo (no other choice here) and the mic is NOT muted (playing with the volume doesn't help either) and output is set to internal audio analog stereo (again, no other choice) and connector is set to analog output (here I can switch to analog headphones or analog speaker, but makes no difference).

I remember that I could choose between Microphone 1 and Microphone 2 in the input tab; this is somehow magically gone.

2) Installed padevchooser, tried several settings to no avail

3) When I use "alsamixer" (version 1.0.20) in a terminal, Playback>Master is set to 100<>100, Capture is set to 150<>150, lowering and/or playing with these figures doesn't help either.

When I use "alsamixer -Dhw:0" in a terminal, I get the same results as in step four.

4) In Gnome Alsa Mixer, only "Beep" is muted, everything else is set to max. I have Master, Headphon, PCM, Front, Front Mi (x2), Lin, Mic, Mic Boost, Capture (x2, set to record), Beep, Speaker

I have tried to mute/unmute different setting to no avail. Now I wonder why I have two Front Mi and two Capture entries. This is different than it used to be, might this be causing the problem?

5) Fiddling with Pulse Audio Volume Control didn't help either.

6) Had a look at "paman" (pulse audio manager), not sure whether I should change anything here.

7) Installed "linux-backports-modules-alsa-karmic-generic" and rebooted as recommended in several threads, did not help either.

Added the parameters "model=auto" and "probe_mask=1" to '/etc/modprobe.d/alsa-base.conf', did not work, so I deleted the entries again (hint from [url], see post 5)

Now I am at my wits end. I need my microphone to work, especially for Skype, otherwise I have to switch to Windows every time I receive or want to make a call which is definitely not a long-term solution?

Does anybody have an idea what might be causing this problem? As I said, it used to work flawlessly just a few days ago and now I don't even know what I should do next to make it work again...

Output of "amixer"

When I run "alsactl init" I get the following result which might be at least a part of the problem, but I wouldn't know how to solve this problem:

Unknown hardware: "HDA-Intel" "Realtek ALC662 rev1" "HDA:10ec0662,103c303a,00100101" "0x103c" "0x303a"
Hardware is initialized using a guess method

View 9 Replies View Related

Ubuntu :: Gnome Do Gcalc Doesn't Work Anymore

May 10, 2010

I don't know whether it has to do with Googles revamp of their search page or something else but it doesn't work any more.

Typing:2+2 =

Results in:"Google Calculator could not evaluate the expression."

I'm using Ubuntu 10.04. GNOME Do 0.8.3.1

View 5 Replies View Related

Ubuntu :: Grub Doesn't Work Anymore Since Update

Oct 25, 2010

I've got a double boot system (Windows XP Pro and Ubuntu Maverick). Since I updated Grub2, Grub doesn't work anymore! I'd tried this (because I HAD that error). But since than, I'd a black screen (harddisk didn't anything, and Grub too...) And now, after using a couple of these commands via the Ubuntu Lucid Lynx Live CD I get a mini bash in Grub, but no entry's to one of the two systems! What's wrong, and what do I have to do? (and what did I wrong?

View 7 Replies View Related

Ubuntu Servers :: Vsftpd Doesn't Work Anymore

Nov 27, 2010

I recently installed vsftpd on my system and it was running fine for my system users. Now I wanted to add virtual users so I googled it, I found this tutorial: [URL]

I did what they've been saying over there but when I restarted the vsftpd I couldn't login with the virtual user and also not with the system user anymore. This is the error ( with the system user who could login before ):

Code:
Status:Verbinden met 109.230.234.21:21...
Status:Verbinding aangemaakt, welkomstbericht afwachten...
Antwoord:220 (vsFTPd 2.2.2)

[Code]...

View 9 Replies View Related

Ubuntu :: Sound Control Doesn't Work Anymore

Nov 30, 2010

after installing trying to install veetle on my ubuntu 10.04 64 bit I always get the message at the start-up:could not update /home/user/.ICEauthority.my sound control does not work anymore (message: 'waiting for sound system to respond')using Krusader I get the message 'Cannot talk to klauncher: The name org.kde. klauncher was not provided by any .service files.I checked the owner of .ICEauthority and the permission and they are OK. Same for my /home. None of the suggestions found in the other threads worked.Veetle has been installed using the install.sh script and there is no unistall option

View 3 Replies View Related

Ubuntu :: Suddenly Touchpad Doesn't Work Anymore

Jul 14, 2011

my touchpad worked out of the Box after insalling Xubunut 11.04 and did so ever since. But since yesterday it doesn't. It worked when i shut down the laptop and didn't when i booted later. How do i fix this? Yes i read the article about thouchpads.

View 2 Replies View Related

OpenSUSE :: Command Doesn´t Work Anymore On 11.4?

May 23, 2011

have You noticed that mt command doesn´t work anymore on 11.4? We try to install new version to hadle robotic library, but someone has written mt command as a new, and it doesn´t accept mt -f command anymore. cpio based mt command it´s not reliable as old one. Can anyone tell where to get old mt command which is compatrible new 11.4 x64 bit version?

View 9 Replies View Related

Fedora Hardware :: Touchpad Doesn't Work Anymore?

Jul 7, 2010

I've been using fedora for about 2 years, and i recently bought a new laptop. After using a usb mouse my toughpad no longer works? Now it works on login but after login touchpad input is gone.

View 4 Replies View Related

OpenSUSE :: Beclock Kde Effect Doesn't Work Anymore?

Apr 5, 2011

I just upgraded from kde 4.4.4 to 4.6.0 in the *stable* kde repo, and now beclock effect doesn't works anymore I can't live without it how can I solve???

View 2 Replies View Related

OpenSUSE Hardware :: 11.2 32 Bit: Audigy 2 Doesn't Work Anymore?

May 6, 2010

After installing openSUSE 11.2 to get rid of my suddenly dysfunctional 11.1, my Audigy 2 doesn't produce a single sound anymore - neither via the regular nor the digital output. It used to work like a charm on 11.1. I cannot say how much I have come to hate Linux during the past 12 months after constant problems with system instabilities due to incompatible software component updates and stuff like my system still not working after ominously going out of service and "repairing" it with openSUSE's repair function.

I decided to get into Linux because I found it cool when I started with a couple of years abo and thought it would be well worth getting into an OS that might become the successor of Windows. I also wanted an OS I felt secure with when doing online banking or shopping.

Well, I have to say that Windows 7 delivers on all the promises Linux has made (at least those that are important for me), and that Linux hasn't advanced a micrometer in the time I have started using it. The only thing in favor of Linux was that it worked well enough on my 6 year old hardware. I'd rather purchase some new hardware and Windows 7 on top of than tormenting myself more with this unspeakable PITA Linux has proven to me to be. To hell with it. Stay in your server corner, but stop telling people Linux was anywhere close to being a useful desktop operating system. PS: Yes, I have tried other distros too.

View 9 Replies View Related

General :: Sound Doesn't Work Anymore After Replacing RAM?

Dec 24, 2010

I replaced one old RAM module with two newer, bigger ones, but now, the sound doesn't seem to work anymore. Already ran alsaconf andOutput of lspci for the audio device:

00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
Subsystem: Giga-byte Technology Device a002
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-

[code]....

View 1 Replies View Related

Networking :: Intel Wireless Doesn't Work Anymore

Aug 2, 2009

My intel pro wireless 2200 NIC doesn't work anymore. Yesterday it did, but not today (I didn't do anything special, so that it could go wrong).What is ucode and -62? Any ideas? I already checked the forums and found that ipw doesn't work when ndiswrapper is loaded. Well, I don't have it loaded. What happend?

View 8 Replies View Related

General :: Rolling Menu Doesn't Work Anymore?

Feb 17, 2010

I am using Ubuntu 10.04LTS and receive regular software updates. Being a silver-surfer I frequent an old fogies site called "Beyond the realms of AOL - forumotion.net" where we share memories and the like. The site (message board) has a rolling menu which up until recently worked on my computer ... now it doesn't! When I log-in, the rolling menu pops up for a second and then disappears. I get the feeling that one of the regular upgrades has removed a plugin or something from my system. I have Adobe Flash 10 (latest version) installed ... perhaps I'm missing something!It has to be my system because the rolling menu works perfectly well using Windows XP.

View 7 Replies View Related

Ubuntu Installation :: Upgrade 9.10 To 10.04: Keyboard Doesn't Work On X Login Anymore

Apr 30, 2010

Just before Lucid was released, I installed karmic on a vanilla VM in 64-bit mode, and all was good. Did a desktop setup and afterwards installed Eclipse, and I was happy: A new system for coding on-the-go! Now, after upgrading to Lucid with do-release-upgrade -d, I can no longer enter my password on X login. The keyboard just doesn't work for some reason. When I enable the onscreen keyboard, and click my password, I can login. The strange thing is that my keyboard works like a charm after I've logged into my X session?

View 7 Replies View Related

Ubuntu Installation :: Dual Monitor Setup Doesn't Work Anymore

May 1, 2010

It used to work perfectly on Ubuntu 9.10 but I get "input not supported" in the secondary monitor.

View 9 Replies View Related

Ubuntu :: Internet Network Doesn't Work Anymore After A Forced Restart

May 3, 2010

I have Ubuntu Lucid Lynx and suddenly my wired internet network doesnt work anymore after a forced restart.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved