OpenSUSE Hardware :: Can Not Print On Hp Deskjet 710c / Sort It?
Feb 4, 2010
I'm an happy user of 11.2 but I've a weird and very annoying problem with my old but still good for me hp 710c Printer.
I should say that I have this problem on with 11.2 because printer runs well either on windows or with other linux distro.
the problem is that when I try to print anything I get:
/usr/lib/cups/filter/foomatic-rip failed
I've found an other thread (11.2 - Cups ends /usr/lib/cups/filter/foomatic-rip failed - openSUSE Forums) regarding the same problem but with 11.2 milestone 1 and the solutions seemed to be to downgrade to an older cups and ghostscript version.
View 9 Replies
ADVERTISEMENT
Aug 16, 2010
I recently installed Ubuntu 10.04 on my computer. Everything works except for my HP Deskjet D2660 printer. The printer is recognized, but it will not print. HP-check shows no errors or warnings. The printer works fine on another computer with Ubuntu 9.10
View 4 Replies
View Related
Aug 5, 2010
My HP Deskjet D-2660 will not print. I can print to file but not the printer. I am running Ubuntu 10.04 and have no other problems. I have installed hpip and hpijs form HP and cups was made available via and upgrade. I have a lot of data from var/log/cups/error_log but don't know what it is supposed to say.
I can print to file and everything else I check seems to say that all is right. Is there any glaring faults that I should look for?? As I stated on the other post I get a message that the print job has been sent to the printer and then another message stating that the print job has completed. In system/administration/printing, the printer shows up properly and has a green check mark on it. Connected to localhost shows at the bottom of the little window. Under /printer it shows shared and enabled Then under printer/properties, it shows as the HP Deskjet D2600 series the location is given as john-desktop It defines the Device URI: hp:/usb/Deskjet_D2600_series?serial=CN9ANDF0ZT05C9 shows the Make and Model HP Deskjet d2600 Series hpijs,.. printer state: idle
Across the bottom it theoretically allows you to print a test page or clean the print heads. (won't print) On the printing-local host small page that opens under system/administration/printing there is no group under that heading only new group or new group from selection. I never named a group since I am the only user.
I have shut the printer down and disconnected the USB and rebooted. Then connect the power and plug in the USB cable I get all the same answers nothing appears to change. Here is some of the var/log/cups/error_log file. It does this over and over every minute same thing. The print que is empty from both administration and applications.
[Code]....
View 2 Replies
View Related
Dec 15, 2010
After a recent update, I suddenly find myself unable to print on my hp Deskjet 1600;
I have the necessary software; the HP management tool is on my panel and I use it.
When I attempt to print now, I get an error that says "hpcups is not installed".
Here is the output of the troubleshooter
Code:
View 1 Replies
View Related
Apr 19, 2011
[i use Ubuntu linux 10.04 LTS - the Lucid Lynx] i tried to print a document and i got the following message from the "document print status (my jobs)": "There was a problem processing document 'take it easy' (job 400)" i tried to print other things but i got the same error. after any print request i sent the printer asked me to release the paper it took, and when i release it, it printed this:"Unable to open the initial device, quitting." i have "HP Device Manager" installed on my computer, and lately i tried to install a wireless printer (officejet 4500 g510n-z) through it, and it failed because the connection between the printer and my computer disconnected before the terminal finished the installation. i didn't try to print with the deskjet right after it but now when i try- it doesn't work, so it might have something to do with my current problem... also when i looked at the HP Device Manager i saw the deskjet printer icon marked with X so i used this program's option "Setup Device" and the X mark disappeared.. and it still doesn't work.
View 2 Replies
View Related
Jun 29, 2009
Centos Version 5.3 updated
Thunderbird 2.0.0.21 (20090327)
Every time I try to print an email it goes through the process of activating the print. in the print window I click "print" then I get a message "You cannot print While in print preview"
Other applications print without a problem. I can also print attachments to emails.
This has been getting worse over a period and now I can not print an email at all. Rebooted, started and stopped the Thunderbird.
View 4 Replies
View Related
Sep 6, 2010
The printer is connected to a networked XP machine that is accessible from Ubuntu.
I have set up the printer as instructed in this help file...
https://help.ubuntu.com/community/WindowsXPPrinter
SAMBA sees the printer on the network , verifies the printer and the driver loads.
Everything goes along just fine until "print test page" No go.
The printer shows up in the "Printing -local host" window.
Under "printer properties" the "Make and Model"are showing the correct device in the correct location.
The "Printer State" shows "idle - /usr/lib/cups/filter/foomatic-rip failed"
Is there something I might have missed in the set-up?
View 9 Replies
View Related
Jun 17, 2010
To whom it may concern.
If your acroread chokes with this error
Code:
"The print process returned an error. Please check whether the printer is connected to the machine."
check if "lpr" is available in your penguin.
Some distros may not have 'lpr' in cups package.
View 1 Replies
View Related
Aug 5, 2010
I am attempting to install my hp Deskjet D1660 printer and I am getting a dependency error that states I am in need of the GNU gcc C+ or C++ compiler. I know I have the latest gcc compiler installed on my system already. I am running SUSE 11.3.
Code:
warning: Missing REQUIRED dependency: gcc (gcc - GNU Project C and C++ Compiler)
warning: This installer cannot install 'gcc' for your distro/OS and/or version.
error: Installation cannot continue without this dependency. Please manually install this dependency and re-run this installer.
Code:
# zypper install gcc
Loading repository data...
Reading installed packages...
'gcc' is already installed.
No update candidate for 'gcc-4.5-4.2.i586'. The highest available version is already installed.
Resolving package dependencies...
View 4 Replies
View Related
May 5, 2011
The Printer works when printing Test Pages.
I want to print an image on GIMP and, in the General TAB, appears:
Status -> /usr/lib/cups/backend/hp failed.
View 1 Replies
View Related
Jun 7, 2010
Suse is 11.1 or maybe 11.2 (btw, how to see the version?) Printer is HP Deskjet 2468 belongs to the 2400 series
I connected the usb ,and Copmuter -> Printing -> New Printer Auto find it and install the driver
Now I can see it but it would not print a test page
I have not a lp group from the YaST -> User and Group Management
View 9 Replies
View Related
Apr 8, 2011
I am trying to set Empathy up and it takes my account on google talk so i can chat. But when I try to initiate an audio call it falls into an error:
"Can't establish audio stream.
There was a failure in the call engine.
Technical details:
Could not sync the state of the new nicesrc with its parent."
View 2 Replies
View Related
Feb 28, 2010
What options should I use when I'm using the sort command to sort the top 5 CPU processes (ps -eo user,pid,ppid,%cpu,%mem,fname | sort ??? | head -5) showing max to min usage?
View 2 Replies
View Related
May 4, 2010
We switched from unix to linux and we have an old report that extracted data from a database, output to an ascii file and then sorted the results in the file based on different arguments. The report now blows up when it runs,and I can only guess it is because the options for sort on linux differ slightly from unix.For example, here is one of the commands issued from within the report app that ran on the old unix box:
if sort-sequence = "descending" then
'sort -t~" -f +3.0f -4.0 +5.0r -6.0 -f '
else
'sort -t~" +3.0f -4.0 +1.0f -2.0 -f'
I will eventually rewrite the report to store the data in a local table, but I can simply adjust the options to suit the requirments of linux. Basically, I need to know if this can be a quick fix for the short term.
View 2 Replies
View Related
Dec 6, 2008
I initially had a problem accessing the CUPS interface (see my other post) and got that resolved by adding the user "cupsys". Now, everything "looks" ok, and when I print a test page, it shows it as completed (in CUPS). However, the page never prints.
The printer is a Canon MP600 (using the canonmp600en.ppd file to configure it). Here's the output of my conf file.
Code:
# Show troubleshooting information in error_log.
LogLevel debug
[code]...
View 8 Replies
View Related
Mar 23, 2011
Interesting problem: For the first time with Xubuntu 10.10 64bit, I am finding certain applications print corrupt. A varying amount of letters / numbers either get substituted/print a blank space/ print a box etc etc. This corruption seems to happen from a Pdf ( evince ) or Spreadheet ( Gnumeric ) Opening the same Pdf on another machine (ubuntu 10.10 32bit) prints perfectly. Opening the same .xls file on the original computer but using OOo Calc prints perfectly.
I guess I have ruled out any problems with the printer itself or the network JetDirect box. I have re-installed CUPS and evince and upgraded to the latest version of HPLIP but the problem appears unchanged.
View 2 Replies
View Related
Jun 5, 2011
I cannot print pdf files. I have tried using okular and xpdf. The documents display in the program, but print preview shows a blank page. The printer then sends out blank pages. I have tried printing on 2 different printers using usb cables. Using terminal to process the commands shows error:
Quote:
xxx@xxx:~$ xpdf
***** MediaBox = ll:0,0 ur:611.976,791.968
***** CropBox = ll:0,0 ur:611.976,791.968
***** Rotate = 0
Segmentation fault
Converting to .ps also is blank.
View 6 Replies
View Related
Dec 26, 2010
My wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?
View 5 Replies
View Related
Feb 16, 2011
I'm running Kubuntu 10.10 with a Laserjet 5M printer. When I attempt to print a job from Firefox or from Okular, the job never gets onto the print queue. However, I can print test pages on the printer and also print from OpenOffice, so this seems to be app-dependent. I know the jobs aren't being queued because the job number doesn't increase (as shown by the jobs for the test pages). Both Firefox and Ocular give every indication that the print job has been processed correctly.
View 1 Replies
View Related
Feb 26, 2011
Not sure when CUPS started acting up. I have the latest 13.1 current software installed.The first page to print is always OK, but all succeeding pages are overwritten. The second page shows the first page on top of it, and the third shows the preceding pages on top of it - and so on. Has anyone else seen this problem?I guess the printer buffer is not getting flushed correctly. If my configurations were trashed in some way, I don't know where to look for a fix.
View 14 Replies
View Related
Jan 29, 2010
Just that, kopete keeps crashing and crashing all the day like two times per hour, in my two lappys.
My Aspire one with openSUSE at 32bits, and my HP with openSUSE at 64bits.
Both, has this kde config code...
View 6 Replies
View Related
Aug 6, 2010
I am using Suse 11.1 on a 64-bit computer. Some time ago, I was helped on these forums to get a Brother MFC-640CW printer/scanner to work by downloading the relevant drivers from the Brother website. Although the printer works fine, when I attempt to scan something into the computer nothing happens. A pop up box appears on screen when the printer is used with an XP OS. Can anybody suggest a way to get the scanner working?
View 3 Replies
View Related
Mar 10, 2011
Has anyone noticed an increase in runtime for sort? I'm having to sort large, 30+ GB text files, and I've noticed a substantial increase in the time needed to sort files in 11.4. Files that take maybe two hours to sort under previous conditions now take multiple hours.
View 2 Replies
View Related
Apr 20, 2011
Webpin is unable to search for packages. Its search for them for ever and cannot find nothing.
Any turn around to fix the issue?
View 9 Replies
View Related
Mar 23, 2010
How can I combine multiple single page prints into a single print job? For example, using Firefox on Linux one can print a web page such that each sheet of paper has four pages printed upon it. I would like to combine several separate web pages so that for example, web-page-a, web-page-b and web-page-c (each less than one print page long) are printed on a single sheet of paper.
I would like to do this without having to use some form of image editor to combine and manage manually created temporary files.
View 1 Replies
View Related
Aug 14, 2010
Just installed drivers for Lexmark pro200 - S500 series. However although it is recognised by the system and has a tick by its name, And tells me it is connected via usb file goes to print que but will not print. Also tells me it is Printing - localhost! is this correct?.
View 1 Replies
View Related
Dec 8, 2009
I've just installed OpenSUSE 11.2 with KDE via DVD. I've checked media for errors. Installation went fine and so far the OS is great and is pleasing me better than Kubuntu.
Except for printing.
I have an Epson Printer plugged in a Wireless router via LPD wich always worked fine. In 11.2 I installed the printer and, on first printing, I noticed I got no tray icon. I had to go to CUPS to manage printing. I got an error in one of the prints. I canceled it in CUPS, but after that I was unable to print again. I always got an LPD backend error. I had to turn it physically off and on to get it to work again.
With Kubuntu I installed the printer via KDE manager and I always managed print jobs without a problem. I never had to touch the printer - except to get the jobs, of course
So,
1) How do I get a systray icon for my printing jobs? Is it possible to manage print jobs without going to CUPS?
2) Why is it choking like that? Is it just with me?
View 9 Replies
View Related
Mar 9, 2010
I need help to resolve this problem, i can't update opensuse 11.2, becouse show me a download error...i tried do it manually but still give me that error.
i opened a terminal and they show me this code...
but if a lock in software repositories, the direction is only this:
Index of /debug/distribution/11.2/repo/oss,
and if i start the software manager, this continue give me that message.
soo please i need help, becouse this is my first time installing this, and i need to give a very quickly s solution.
View 5 Replies
View Related
Apr 26, 2010
I recently installed freeradius using Yast,but wehen I tried to run it in a debug mode code...
View 4 Replies
View Related
Jan 5, 2011
After an upgrade to opensuse 11.3 from 11.2 it turns out that cron uses pam for authentication. Now I have one user 'mythtv' which does not have a login and is not part of the 'users' group. This user is being denied access (permission denied messages in /var/log/messages from crond).
Now, I have been experimenting with the /etc/pam.d/crond config file. I wanted to use the pam_listfile module to grant access to this specific user without authentication. That however didn't work and I have now narrowed down the problem even more.
When I use this for my crond file
Code...
What could be the problem here?
View 3 Replies
View Related
