Suse is 11.1 or maybe 11.2 (btw, how to see the version?) Printer is HP Deskjet 2468 belongs to the 2400 series
I connected the usb ,and Copmuter -> Printing -> New Printer Auto find it and install the driver
Now I can see it but it would not print a test page
I have not a lp group from the YaST -> User and Group Management
The Printer works when printing Test Pages.
I want to print an image on GIMP and, in the General TAB, appears:
Status -> /usr/lib/cups/backend/hp failed.
I updated to the recent 9.10 version of Ubuntu and found that my printer no longer works. When trying to print, the printer just blinks and *occasionally* makes a noise and prints out a partial line of text or whatever. It's a USB connecting HP Deskjet D1420 that is not a network printer and does not need to be networked.
[Code]...
I'm using a HP Deskjet F380 multifunction printer on a ubuntu 9.1 machine. It recognises it as an F300 series printer and so far it prints and scans very well. The problem is that I usually print 2 pages per sheet and double side on windows but I cannot do it on linux (in this case the option of printing odd pages first and even pages second is useless). I see there is an option in your printer preferences to print double side but it doesn't work.
View 3 Replies View RelatedI recently installed 10.04 and the printer was working for a while. Now when I print something the print que icon shows up and goes out like it has printed but nothing prints. I ran the troubleshooter and got this.
Page 1 (Scheduler not running?):
{'cups_connection_failure': False}
Page 2 (Choose printer):
{'cups_dest': <cups.Dest HP-Deskjet (default)>,
[Code].....
Suddenly, my printer has stopped printing in black. Either I get a smudge on the paper, or the warning light comes on and it stops working completely.
hp-levels reports the black cartridge as 82% full and in good health hp-info says "there is a problem with a print cartridge" hp-clean either doesn't help or doesn't run
I've tried wiping the print head (the ink's coming out OK) and polishing the cartridge connection.
I can't print via our network printer (HP DeskJet 3650) which is connected to a WinXP PC on the network. My laptop is wireless connected to the network. My distribution is openSUSE 11.2 and I tried setting up the network printer via CUPS:
Went to http://localhost:631
Add Printer
Device: Windows Printing via SAMBA
Device URI: smb://UMBRELLA/SMOKE/HP3600
Make: HP
Model: HP DeskJet 3650, hpcups 3.9.8 (en)
Printer State: idle, accepting jobs, published.
Then clicked the "Print Test Page" button. At this point the printer actually starts making sounds.. the same sounds it makes when it's preparing to print something. But then, it stops. The printing job is still present in the printer queue at the WinXP PC, but it won't print.
So I looked at this documentation: [URL]
Step 2 from this documentation tells me to install a PPD file.. which I can't find anywhere. It's not on the original HP driver CD, neither can it be downloaded from this page: http://www.openprinting.org/show_pri...P-DeskJet_3650.
Also, I believe I have everything installed:
Code:
serrano@saibot:/usr/share/cups/model/HP> rpm -qa hplip hplip-hpijs foomatic-filters
hplip-hpijs-3.9.8-3.4.1.i586
foomatic-filters-4.0.1-2.1.i586
hplip-3.9.8-3.4.1.i586
I have hp and samsung printers HP L3000, HP P1320,P2035,P2015 and Samsung ML750. Now when i like to print a landscape doc from libre office and i select landscape orientation but still the report comes in portrait format.even if i go to cups n change printing orientation from auto to landscape I still not get a landscape report.Another problem is that in windows I selected the row in excel to print then printed using fit to one page.But in suse I dont see that option
View 1 Replies View RelatedI just installed my HP DeskJet 1220C printer on my CentOS 5.2 server, and it's working apart from one GIANT issue: It only prints from my Windows machines via its Samba share. It won't print from any of my Linux machines, not even the machine itself. I seem to be stumped here, I cannot find a reason why its doing this.
View 7 Replies View RelatedI expected more from ubuntu 10.4 with regards to printing with exact size photos and with poor auto colour printing but the situation remains unchanged! for instance .. the photo size configurations for ubuntu/fspot/gimp and others are not compatible with my printers (HP and Brother) .. here in Europe a typical standard size photo (10x15inches or 150x100mm are not even on the Ubuntu listing? I have tried all listed possibilities including "custom" (which does not seem to ever work correctly?)and the result at best is photos with uneven boarders or at worse my printer goes a bit crazy with much wasted photo paper and expensive ink ...even photos selected for "no boarders" still produces photos with the self same uneven boarders.
I have tried pretty much everything over time following advice in this forum and including using HPlip and updating drivers required for my Brother printer but the root problem seemingly lies with the Ubunto photo size setup listing. Working with Ubuntu over the years I have found that it can do pretty much everything that Windows can do except for this dam ongoing photo quality and configuration problem.
Strangest thing happened today. I tried to print a simple text document from Kwrite and noticed it would not print. I tried it again selecting a different printer. No result. I tried copying the contents and pasting into Libre Office, then print...no printers to select...Odd. I decided to check on cupsd status from CLI. It was up. Here's where things get stranger. I open CUPS web manager and select printers...'No printers found' Okay, that's odd since I should have about 12, and they are showing up in Kwrite but not in LibreOffice nor CUPS manager.
Assuming Kwrite used some sort of cache I decided to check out /etc/cups/printers.conf....Hmmm zero byte file with but in the same directory a file printers.conf.O dated about 7 days ago. So I did an /etc/init.d/cups stop, did a cat printers.conf.O > printers.conf and /et c/init.d/cups start...all is back to normal. WTH?! What waxed all of my printers?
I'm trying to get HP DeskJet 1050 working on Slackware 13.1. When I plug it in to USB I can see it in lsusb. I've installed CUPS started it and went to add printer - but printer is not found. Ok, so I wanted to choose the series I have but 1050 is not listed in HP (is this driver missing?). So I went on to google on it and I got to HP website telling me to install HPLIP. Ok downloaded extracted and ./configure should run but it is not there (automatic script run has no Slackware listed).
View 6 Replies View RelatedI haven't paid attention to this before (there are too many monitors around here). But I just noticed a display problem with fglrx on HD 2400 XT (iMac) : parts of pages get covered with gray or black while scrolling up and down in Firefox.
I did reboot that machine a couple times and switch the driver to reproduce the problem. It never occures with either radeon or radeonhd.
I bought a Kodak 5300 printer/scanner a year and a half ago and then found that it would not work under 9.04. So I packed it away. Now I find reports on this website that it can be made to function properly on Lucid Lucy.
I find references to the printer all over the place, but when I try to print something nothing happens. I tried the print routine in 'gimp', 'gedit', 'thunderbird, and 'firefox'.The printer as a stand alone will copy and scan. About a year and a half ago it was connected to a Windows machine and worked.The Samsung you see works just fine.
I am attempting to install my hp Deskjet D1660 printer and I am getting a dependency error that states I am in need of the GNU gcc C+ or C++ compiler. I know I have the latest gcc compiler installed on my system already. I am running SUSE 11.3.
Code:
warning: Missing REQUIRED dependency: gcc (gcc - GNU Project C and C++ Compiler)
warning: This installer cannot install 'gcc' for your distro/OS and/or version.
error: Installation cannot continue without this dependency. Please manually install this dependency and re-run this installer.
Code:
# zypper install gcc
Loading repository data...
Reading installed packages...
'gcc' is already installed.
No update candidate for 'gcc-4.5-4.2.i586'. The highest available version is already installed.
Resolving package dependencies...
I have recently installed Fedora 13 dual booted with windows 7. Everything on both OS's works fine with the exception of Linux printing. I am using a Netgear WGPS606 print server. (it works fine on Windows 7). I have, from Linux pinged the server (192.168.1.200) and have gotten a response for each string sent but following the usual procedure [System-Administration-Printing then Add (a printer)- Expand Network Printer etc.] The response is that there is no printer found at that address. (the firewall was disabled).
View 4 Replies View RelatedThis printer has worked fine with FC14 on my AMD x86_64 system for months using the printer drivers from the Brother Solutions Center web site (see below). I installed FC15 today from the network CD and installed the same printer drivers. Test print works fine, and just now this web page printed OK using Firefox. But when I try to print from LibreOffice Writer or Thunderbird, a message appears briefly at the bottom of my Gnome3 desktop that the job is being printed and then another message saying that printing is complete. Nothing is sent to the printer, however. In Thunderbird, the Print dialog window says the status of the MFC-240C is "No pages found!" I tried deleting the printer using System Setings -> Printers and reinstalling using system-config-printer, selecting the Brother MFC-240C, with no change.
Brother drivers:
mfc240clpr-1.0.1-1.i386.rpm
mfc240ccupswrapper-1.0.1-1.i386.rpm
I'm an happy user of 11.2 but I've a weird and very annoying problem with my old but still good for me hp 710c Printer.
I should say that I have this problem on with 11.2 because printer runs well either on windows or with other linux distro.
the problem is that when I try to print anything I get:
/usr/lib/cups/filter/foomatic-rip failed
I've found an other thread (11.2 - Cups ends /usr/lib/cups/filter/foomatic-rip failed - openSUSE Forums) regarding the same problem but with 11.2 milestone 1 and the solutions seemed to be to downgrade to an older cups and ghostscript version.
This probably way TOO much information. Sorry for the long post. I bought a Kodak 5300 printer/scanner a year and a half or so ago and then found that it would not work under ubuntu 9.04. So I packed it away. Now I find reports on several websites that it can be made to function properly with ubuntu 10-4 Lucid Lynx. I downloaded and installed the recommended driver - c2esp. [URL]...
Quote:
dave@dave:~$ dmesg | tail -n 14
[ 43.353990] EXT3 FS on sdb1, internal journal
[ 43.354009] EXT3-fs: mounted filesystem with ordered data mode.
[12885.576042] usb 1-8: new high speed USB device using ehci_hcd and address 5
[12885.720095] usb 1-8: configuration #1 chosen from 1 choice
[12885.730916] usblp1: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x040A pid 0x4026
[Code]....
I find references to the printer all over the place, but when I try to print something nothing happens. I tried the print routine in 'gimp', 'gedit', 'thunderbird, and 'firefox'. The printer as a stand alone will copy and scan. About a year and a half ago it was connected to a Windows machine and worked.
Where can I find driver and install it on backtrac4 for hp laserjet 6l and scenjet 2400?
View 1 Replies View RelatedI have an old Dell Dimension 2400 running Windows XP.I want to dual boot a Linux Distro on this PC. It has a Celeron Processor (2.60Ghz, 400 fsb. 256 cache) Hard Drive is 40GB IDE Installed Ram is 256Mb (Though I am in the process of maxing this to 2Gb). I have 10 GB Free space. I want to run a Linux Distro on this space.
View 14 Replies View RelatedFirst time user of Ubuntu and first post on this forum. So i installed Ubuntu on an external hard drive, it took me a couple days. I followed the web sights direction and when i saw the option for windows or Ubuntu, clicked Ubuntu and that brought me to this:
GNU GRUB Version 1.98+2010...
Minimal BASH-like line editing is suported. For the first word, TAB list possible command completion. Anywhere else TAB list possible device or file completions.
GRUB>
No tricksters Im having a profetional check this stuff before i use any of it
I am running Fedora 12 on a Dell dimension 2400 with the following hardware:
Intel Celeron 2.40Ghz. 400Mhz FSB
512MB DDR-SDRAM
80GB IDE 7200.0 RPM harddisk
Onboard intel graphics
Is another 512MB RAM going to make a noticeable difference ? or is the CPU the problem ?
I installed a program with Yast (Kmess), but when I try to run it, bash gives me back this message:
Code: kmess: command not found I checked into Yast and it seems to be installed correctly!
I would like recommendations for a USB wireless device to get Internet on a Dell Dimension 2400. It is an old computer but, Ubuntu 10.4 is running like a really fast steam train - like nothing will stop it. Hooray for Ubuntu - XP has been dumped from this machine when I inherited it as it was becoming bloated and inevitably slow (not that I wanted to keep it any way). So I only need a good easy to install wireless USB device for Internet connection. I bought a Realtek RT2070 chipset device without reading into the dos and don'ts. My own fault really as I have been spoilt with everything 'just working' with my laptop and Ultimate Edition Linux.
I have tried a few different driver versions for this thing and it simply won't see the device properly. I can get a @Connection Established' message with a couple of the drivers but, I never actually get connected. I have tried the Windows Wireless Drivers and although they all install I get the 'No Hardware Detected' next to the driver name every time. Something definitely not working somewhere.
So I am giving up with this one and hoping I can find one that people know works well and easily installed. Preferrably with a .deb file (asking a bit much I know but, in this day and age I expect it). After all the other Operating Systems have their own executables that work for all installations of everything. Oh, how I wish I had the time and know-how to do this for all peripherals for Linux. It would be like being in seventh heaven for everyone. No more compiling, or make commands just download and install...
I was amazed to see four simultaneous video feeds running in VideoLan the other day through Ultimate Edition on a Dell Studio 1537. I think I could have just kept opening and running the videos. They had no dropped frames at all - amazing when I considered the same day what crap Windows 7 was to stutter trying to play a CD with music.
I have a fresh install of Kubuntu on an old Dell Dimension 2400 that seems to be working perfectly except for the network connection. I have a wired network connection to a linksys router connected to a cable modem. This connection works on other devices.
Code:
ifconfig
eth0
Link encap:Ethernet HWaddr 00:0b:db:b6:cf:09
[code]....
I've seen a bit about the display being frozen on intel integrated displays, but I do not see the answer anywhere. Does anyone know how to fix this problem: Ubuntu 9.10 boots and runs just fine for 10, 20 or even 30 minutes performing variety of tasks. Then, without warning the display is frozen. The mouse can move the pointer just fine, but I cannot interact with the desktop and the machine must be shutdown by holding the power button.
I've observed this while playing a Kpatience game, general surfing of the internet, and view ..... videos. One time it happened when the display powers off after being idle, but this is not consistently the case. I have tried to make the freeze happen, but am unable to do so (so it seems, anyway). What is happening here? Here are the details of my system:
Dell Dimension 2400 Desktop
Output from lshw:
*-display
description: VGA compatible controller
product: 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device
vendor: Intel Corporation
[Code]...
I'm owning an old single Core AMD (Opteron 148, like Athlon 64 3200+), it can't play h264 1080p-Videos without framedrops in active scenes. I'm also owning an not so old AMD/Ati Radeon HD 2400. It's not an UVD2 card, it's not even UVD+, its UVD i.e. UVD1. All articles regarding GPU h264 decoding I've found so far are saying "for vaapi gpu decoding on linux you need to have a UVD2 card". That's wrong! My UVD1-Card is playing fine some demo movies.
Setup:
Ubuntu "Lucid" 10.4
"deb http://ppa.launchpad.net/nvidia-vdpau/cutting-edge-multimedia/ubuntu lucid main" in /etc/apt/sources.list.d/cutting-edge-multimedia.list
[code]....
(With the original Ubuntu Lucid fglrx (8.723) there's some error, I don't remember the words. It doesn't work for me)It's working. I can play h.264 HD Videos with mplayer and decode it with a Radeon GPU. vlc 1.2 not working so far. It seems it's decoding fine, but screen remains green. Here's a screenshot, no fake! It's a two Monitor setup with fglrx' big Desktop. On the right there's running a movie Trailer (I Am Legend) and on the left there's some status info. Quality is not perfect (as you can see, horizontal displacement), but it's basically working.
We developed qt based application in linux. I wish to stop ejecting the paper after printing over.How to do it.
View 2 Replies View RelatedAnyone having trouble printing pages from opera 10.10 in opensuse 11.2.
View 5 Replies View Related