CentOS 5 :: Can Not Do Anything While In Print Preview / Sort It?
Jun 29, 2009
Centos Version 5.3 updated
Thunderbird 2.0.0.21 (20090327)
Every time I try to print an email it goes through the process of activating the print. in the print window I click "print" then I get a message "You cannot print While in print preview"
Other applications print without a problem. I can also print attachments to emails.
This has been getting worse over a period and now I can not print an email at all. Rebooted, started and stopped the Thunderbird.
View 4 Replies
ADVERTISEMENT
Jun 5, 2011
I cannot print pdf files. I have tried using okular and xpdf. The documents display in the program, but print preview shows a blank page. The printer then sends out blank pages. I have tried printing on 2 different printers using usb cables. Using terminal to process the commands shows error:
Quote:
xxx@xxx:~$ xpdf
***** MediaBox = ll:0,0 ur:611.976,791.968
***** CropBox = ll:0,0 ur:611.976,791.968
***** Rotate = 0
Segmentation fault
Converting to .ps also is blank.
View 6 Replies
View Related
Oct 24, 2010
I am using Ubuntu 10.10 and have run into a problem recently. When I use print preview in gedit, a "print preview" screen comes up and all of the pages are blank. Sometimes, one or two pages are shown but it is random. This just started to happen when I upgraded to 10.10. I did a fresh install so a partial update would not be an issue.
Are there any ideas what could be wrong? Sorry if this thread exists somewhere else but some google searching and ubuntu fourm searching resulted in nothing.
View 1 Replies
View Related
Feb 17, 2010
There is the option to select a "printable form", but the form is much larger than any paper the printer supportsIf I use "Print Preview" in Firefox, it creates only one page that contains the beginning of the form, and ignores the rest of the form.If I do the exact same thing on a Windows machine, Firefox creates as many pages as necessary when I click "Print Preview"I feel that this problem is not because of Firefox, but because of how "Print Preview" works on Ubuntu.How can I get the print preview to create additional pages to include the entire text when I click "Print Preview" ?
View 3 Replies
View Related
Sep 6, 2010
The printer is connected to a networked XP machine that is accessible from Ubuntu.
I have set up the printer as instructed in this help file...
https://help.ubuntu.com/community/WindowsXPPrinter
SAMBA sees the printer on the network , verifies the printer and the driver loads.
Everything goes along just fine until "print test page" No go.
The printer shows up in the "Printing -local host" window.
Under "printer properties" the "Make and Model"are showing the correct device in the correct location.
The "Printer State" shows "idle - /usr/lib/cups/filter/foomatic-rip failed"
Is there something I might have missed in the set-up?
View 9 Replies
View Related
Feb 4, 2010
I'm an happy user of 11.2 but I've a weird and very annoying problem with my old but still good for me hp 710c Printer.
I should say that I have this problem on with 11.2 because printer runs well either on windows or with other linux distro.
the problem is that when I try to print anything I get:
/usr/lib/cups/filter/foomatic-rip failed
I've found an other thread (11.2 - Cups ends /usr/lib/cups/filter/foomatic-rip failed - openSUSE Forums) regarding the same problem but with 11.2 milestone 1 and the solutions seemed to be to downgrade to an older cups and ghostscript version.
View 9 Replies
View Related
Jun 17, 2010
To whom it may concern.
If your acroread chokes with this error
Code:
"The print process returned an error. Please check whether the printer is connected to the machine."
check if "lpr" is available in your penguin.
Some distros may not have 'lpr' in cups package.
View 1 Replies
View Related
Feb 3, 2010
In my CentOS 5.4 installation i configure it as a server GUI and click the updates box and go to the configure now option and click the internet box but it just says getting packages or something like that and i never does.
View 6 Replies
View Related
Mar 12, 2009
I tried to install with this command:
rpm -Uvh webmin-1.450-1.noarch.rpm
And got these error messages.
Quote:warning: webmin-1.450-1.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 11f63c51
error: can't create transaction lock on /var/lib/rpm/__db.000
View 2 Replies
View Related
May 22, 2009
Trying to install yum-installonlyn, yumex reports a dependency error because libgif.so.4 is needed. However, that library is in /usr/lib and I also have copied it to /lib - with no success. Could anybody tell me which piece of information I am failing to give yum?
View 4 Replies
View Related
Feb 9, 2010
I had VNC working with accounts that were logged in. Then I went thru the procedure for vnc-itsp-config (step 5 of the how-to-centos5 vnc server wiki) so that I could log in remotely to an account that was not already logged in.
All went well until....I tried to log in and all I get is this X11 window with a X cursor and a black screen.
I have restarted the vncserver service but I suspect it is a x11 issue (just a guess).
View 5 Replies
View Related
Jun 4, 2010
Cent OS 5.5
How do I configure CUPS to print to PDF?
View 1 Replies
View Related
Jan 2, 2011
My canon mf 4018 could not print in Centos 5.5 What I did before: I chose Administration/printing and there I tried to add new printer. Unfortunately, I could not find my model of the printer in that list. I used also official canon site to find a driver for Centos 5.5.
View 2 Replies
View Related
Aug 13, 2011
I am trying to print to an HP LaserJet 6L via a USB->parallel printercable, from a CentOS 5.3 machine using CUPS 1.3.7, but I cannot get itto work.When I plug the cable into the USB port on the CentOS computer, I seethat the following devices are created:
crw------- 1 root root 442, 6145 Aug 13 08:28 /dev/usbdev4.2_ep00
crw------- 1 root root 442, 6145 Aug 13 08:28 /dev/usbdev4.2_ep02
crw------- 1 root root 442, 6145 Aug 13 08:28 /dev/usbdev4.2_ep81
[code]....
View 9 Replies
View Related
Apr 8, 2010
I'm able to connect to ftp as a virtual user. It was also difficult as nowhere mentioned, that it should be done with SSL. Anyway I found the answer and got connection. But now I can't connect to ftp server as system user. It gives me "530 Permission denied", or if I delete the user from the file denied_users, - "530 Login incorrect".
1. Still I can't understand, how I can log in to FTP server with a system user.Also some other questions regarding this matter:
2. My httpd server Apache has a virtual hosts located in "/home" directory.The scripts create users in "/var/ftp virtual_users". Will it cause any problem if I will change them to "/home"? All I need to do with this is ability to have several virtual hosts in one server with separate access to each of them via FTP. And 1 account with access to all files in "/home".
3. In my ftp client I can see the owner of virtual host "ftp" instead of username.
View 7 Replies
View Related
Feb 16, 2009
I'm trying to compile libetpan-0.57 on RedHat Enterprise Linux 5.2 64-bit and it is refusing to link against the 64 bit system libraries. I've tried everything I can think of. I've tried to hack libtool, run the command make was trying to run manually and changing the library search paths but nothing works. When I run the command make tried to run manually and change -L/usr/lib to -L/usr/lib64 most of the "skipping incompatible" library messages disappear except for "/usr/lib/libexpat.so: could not read symbols: File in wrong format." Below is the output when I run make code...
View 4 Replies
View Related
Apr 21, 2009
I have a .sql file that is too large and needs to be uploaded via ssh.I know the commands to do this but my username password has parenthesis in it i.e. (password)So I am getting -bash: syntax error near unexpected token.
View 2 Replies
View Related
Dec 11, 2009
I added two scsi disk, but it is not listed in /dev. But the controller information is available from lspci code...
View 4 Replies
View Related
Mar 4, 2010
neeed help setting up a network printer on centos 5.2
View 4 Replies
View Related
Aug 27, 2010
I just installed CentOS 5.3 on Compaq desktop PC with HP laser jet 2100 attached to parallel port. The PC is connected to LAN with 2 other PCs running Fedora. I configured the HP printer as a shared CUPS printer and I was able to detect the printer from the other PCs running Fedora but I can't print test page from the other PCs.
P.S. I opened up port 513 and 631 for both UDP and TCP on print server PC and cups-lpd service is running on it.
View 3 Replies
View Related
Sep 12, 2009
I'm attempting to install CentOS 5.2 x86_64, on an HP Pavilion/Intel Core Duo.
The DVD boots, anaconda starts, displays blue screen with "Loading usb-storage driver", and then hangs at a blue screen of garbage.
View 6 Replies
View Related
Aug 16, 2010
I had a perfectly well running CentOS 5 system but with an old crappy monitor. I replaced the monitor by a bigger one, i did a monitor detect to make sure that CentOS would recognize the highest possible resolution. Then changed the display rsolution for the current user.
Now when i login as root just a black screen appears with a white mouse pointer and then nothing. I already deleted all the contents in the home directory /root but no improvement.
When i login as a new user X is starting perfectly.
Anyone have a clue what i need to do or delete to get X working again? I can nuke the whole box and do a reinstall but i'd rather not.
View 3 Replies
View Related
Oct 6, 2009
I work at The University of Alabama as a sysadmin on various HPC resources and also provide support for faculty using Unix systems. I've run into one problem that is affecting two different desktop systems running CentOS 5.3.oth of these systems have the latest updates. These machines have standard network-attached printers. One is an HP LaserJet 3250 and the other is a model that is pretty close to that one.Previously these users were able to print from graphical applications such as Firefox, but now when the print dialog is opened on ANY graphical application, it causes a hard freeze on that particular app.Printing from the commandline via `lpr` gives no issues and test pages from the Printer Admin interface also succeed.This problem has me stumped, so I'm looking for any insight as to what could have changed. I do not know what changed between the time when the printers worked graphically and when they stopped, but the users assure that they have changed no settings. The only thing I can suspect is a rogue update since this is affecting separate users on separate machines with separate printers.
View 4 Replies
View Related
May 18, 2010
I have made a cluster between two server.
In luci I can see that my cluster is green and the two nodes to.
I have make an IP resource and associate it to a service : green : I can relocate the service from a node to the other one and the IP appears in the list of IP addresses
The problem is that I have made the same in order to configure tomcat and postgresql and it does not work...
I put my configuration only for ip and tomcat:
My host configuration code...
View 4 Replies
View Related
Jan 20, 2011
I have installed CentOS 5 just downloaded yesterday on a Dell D620. Everything but the wireless card works. So I found this article:
http://wiki.centos.org/HowTos/Laptops/Wireless/Broadcom
and followed it step by step and was able to complete all of the tasks. The problem is that obviously it still won't start. It is not even recognized as an adapter but when I run lspci -v it is there sure enough. When I look under the networking GUI it is listed there but it has no MAC assigned to it. Please let me know what command output you need to see and I'll get here asap. I have searched this forum and other sites and nothing so far has worked.
View 1 Replies
View Related
Jan 30, 2009
This week I picked up a Dell Studio Hybrid and installed CentOS on it. I originally used 5.0 since I already had the DVD and the network card wasn't recognized at all (lspci recognized it but the card didn't show up in system-config-network). I then downloaded the 5.2 DVD and installed that. The network card then showed up in system-config-network but it still didn't work. If DHCP is enabled it tells me that no link is present, and if I manually configure it, I still can't ping the router. lspci reports the following about the network card:
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
The driver used is r8169.
I put Fedora 10 on it and the network is working fine, but I'd rather run CentOS on this machine. Is the issue likely to be fixed with CentOS 5.3 or should I just stick with Fedora?
View 11 Replies
View Related
Feb 28, 2010
What options should I use when I'm using the sort command to sort the top 5 CPU processes (ps -eo user,pid,ppid,%cpu,%mem,fname | sort ??? | head -5) showing max to min usage?
View 2 Replies
View Related
Apr 1, 2009
My setup is like this: i have a small office network and i bought yesterday a new multifunctional printer Samsung SCX-4521F. It is shared with samba and connected to the server with USB. In the network everyhing works well, users can log on to the domain, print from windows to the new shared Samsung printer and i even managed to enable network scannin. But when i try to print from MS DOS i wont get a single page. We have an accounting program in dos. All the other computers are XP Pro SP3. My server is running for 2 weeks the newest CentOS with all updates. I'v maped the network printer in windows witht the command "net use LPT1 \ServerSCX-4521F. I get a message that maping was completed succesfully. If i start a print job nothing happens. "Printing" or "warming up" flashes several times on the printer and thats it.
CUPS error log:
I [02/Apr/2009:00:03:45 +0300] Adding start banner page "none" to job 125.
I [02/Apr/2009:00:03:45 +0300] Adding end banner page "none" to job 125.
[code]....
View 3 Replies
View Related
Sep 27, 2009
I am demo'ing Kubuntu 9.04 workstation to a customer. He has a CentOS 5.3 server (my doing). On it is our CUPS Network file server. Everyone (65 of them) print to our network printer through it using LPR/LPD (and sometimes Samba).
Problem: when Kubuntu's Print Configuration Tool went looking for printers, it found every network printer's IP address, but missed my CUPS printer server. What did I do wrong on one or both ends (I have control over both).
View 7 Replies
View Related
May 4, 2010
We switched from unix to linux and we have an old report that extracted data from a database, output to an ascii file and then sorted the results in the file based on different arguments. The report now blows up when it runs,and I can only guess it is because the options for sort on linux differ slightly from unix.For example, here is one of the commands issued from within the report app that ran on the old unix box:
if sort-sequence = "descending" then
'sort -t~" -f +3.0f -4.0 +5.0r -6.0 -f '
else
'sort -t~" +3.0f -4.0 +1.0f -2.0 -f'
I will eventually rewrite the report to store the data in a local table, but I can simply adjust the options to suit the requirments of linux. Basically, I need to know if this can be a quick fix for the short term.
View 2 Replies
View Related
