OpenSUSE Hardware :: Ati Driver And Yast Won't Identify Card In The Hardware Section
Jan 29, 2010
I have a ati firepro v3700, and I installed the driver I think. I did the fglrx install, and it said it worked. I believe it because prior to doing that my video was off and very laggy, but now it's fine.
My problems are these: yast won't identify my card in the hardware section, and it won't let me turn on 3d effects. I know most people wouldn't care, and I wouldn't, except I use linux to do FEA and CFD research. I used ubuntu before no problem, but some of the programs I used weren't supported.
View 1 Replies
ADVERTISEMENT
Jul 20, 2010
I just want to change the text displayed on bootup from "Desktop - opensuse - lotsaversion numbers" to "OpenSUSE 11.3".I tried doing it during installation, but it didn't seem to take affect, and now it won't let me do it through Yast
View 5 Replies
View Related
Dec 8, 2010
In my YaST Network Settings (11.3), I see an entry labelled "Unknown Network Device" how to remove the confusion? The Overview tab also correctly lists my three known network devices (listed below), as does the Hardware Information utility. This is the output of lspci, and as far as I can tell, is accurate and complete. So what has YaST seen that it can't identify?
Code:
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 11)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 11)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI [Code].....
View 7 Replies
View Related
Jul 8, 2010
You maybe know that VirtualBox has an "immutable" feature for HDD images. I.e. setup the system, if the stuff is in place, you can set the image to IMMUTABLE to prevent any changes to the image. Differences are written to a separated image. So on the next boot you'll see that all the (unintended) changes are gone and the "old" system is up & running again. I run an old SuSE 10.3 on a write-protected SD-IDE-Adapter. Changing and playing with RPMs is a mess due to around 50 changes I had to do to make that work. Is there any option to mount an SD-card as RO and having all the changes written to e.g. /dev/sda3? To make it clear: I thought about something like a RAID-X system, but could not find any description on how to setup a raidtab.
View 3 Replies
View Related
Mar 6, 2011
Recently I had to replace my Hauppauge HVR-1600 (it was doing everything I wanted it to do but after a few years burned out) and decided to get the HVR-2250. Before purchasing I checked the forums and noticed that there was quite a bit of support and most everyone managed to get it working so I thought it would be a good idea.
The problem I have now is that, though lspci shows the card as Multimedia controller: Philips Semiconductors Device 7164 (rev 81); however, when trying to setup mythtv-backend, the card does not show up under the "capture card" section. After a few hours of research, I came across this thread and it seemed to be general consensus that the method worked so I tried it. Still no luck.I ended up formatting, fresh install of Ubuntu 10.10 and then installed MythTV and still nothing. Not really sure where to go from here.
View 9 Replies
View Related
Dec 7, 2010
I've just upgraded from 11.1 to 11.3. When I go into Yast and try to invoke the Graphics Card and Monitor settings, nothing happens - I get the spinning circles for a few seconds and nothing after that. How can I get at those settings, and why doesn't Yast let me do that?
View 9 Replies
View Related
Aug 1, 2010
How do you determine the source and version of a device driver in your linux box? (The wifi driver, for instance.) In windows you can find that info using "device manager". I suppose there is some corresponding tool in linux.
View 2 Replies
View Related
Mar 2, 2011
I have a printer connected locally to my Debian box. It runs fine via cupsd.I am also running a Windows 2003 VMware guest which I would like to use the printer (use as a local printer, not a network printer).
VMware offers a connection via USB, so it should work. The printer I have plugged locally into the Debian host is recognised by the Windows 2003 guest, but it won't print. I get an error message saying that the printer is still connected to the host OS, and that I need to remove (or presumably disable) the host driver before the guest can use the printer.
So how can I find out which printer driver/module is being used by the Debian host to connect to this printer? And what is the best way to temporarily disable it, while my VMware guest is running?
View 3 Replies
View Related
Nov 14, 2010
I have a problem with the graphics on my thinkpad a22m laptop. specs:
900mhz cpu
256 ram
20gig hd
??ati rage mobility m3 video card ??
when I start up ubuntu (10.10) and reach the desktop, the screen is messed up. The center of the screen becomes blurry, and it looks like what is normally the right part of the screen is duplicated in the middle of the screen (with what should be the middle of the screen disappearing).
I think its an ATI video card, and I tried to install different driver from Softwarecenter but no succes.I know the screen is working, because when I boot forinstance, the Ibm logo is showed nicely across the screen. So its not a hardware issue. Another thing, I got puppy linux to work correctly after having the same grapphic issues on that OS when I first installed it. But some how I managed to get the right drivers. But as I like ubuntu more, I would appriciate your help with figuring this out
ps. when I try to setup screen resolution in System>Settings>"resolution", Ubuntu says "unknown display" (marked with red color).
View 1 Replies
View Related
Sep 22, 2010
I have an old Radeon 9250, reported as RV280 in hardware info, the current driver is radeon but the performance looks very suspicious to me.
In browsers, for example, simply scrolling down a page shoots CPU to 100%.
It could be the browser issue but at this point I tend to think that I need the proprietary Ati driver, the problem is that my card is "legacy" and simply installing their driver from their repo won't work for 11.3.
So, what are my options here?
Is Radeon driver tweakable in any way?
If fglrx is the better solution - what are the general steps to install an older driver? There's so much to read on it and I can't figure out what is applicable to my case and what isn't.
Maybe I should just revert to 11.2?
I tried checking Opera forums, it doesn't seem like a browser issue and it works just fine on 11.3 with a different graphic card anyway. I wouldn't mention it at all but older versions of Opera, below 10.11, comparing to 10.61 in repos or 10.62 on their site, work extremely fast without any lag, or any latest improvements, for that matter. Chrome appears faster but CPU still shoots up to 100% on page scroll.
Or should I just buy a new card? They are not very expensive but then my motherboard might support only what is now "legacy". It's AGP, not PCI express or whatever it's called now. In that case, should I go for nVidia or Ati? I've got AMD processor, if it matters.
View 3 Replies
View Related
Jun 25, 2010
I have unfortunately found myself unable to properly boot up openSUSE because I decided to buy the Acer Aspire with the i5 Processor.
I have the Intel Graphics Media Accelerator HD (GMA HD) graphics card, and unfortunately from all my searching online and on openSUSE, I have been unable to find a driver for this that works for linux, and in addition I don't know how to install a driver outside of a GUI.
My openSUSE boots up to the boot choosing screen (regular openSUSE or failsafe), and then that nice list of functions being done is displayed, but as soon as the daemon has started, suddenly my screen goes blank and I am unable to do anything about it. Beyond this point, my OS loses all functionability, and while I can hear it computing, I am unable to actually tell WHAT it is computing. get a driver for this and to install this driver and get this GUI running, that would be great.
View 7 Replies
View Related
Feb 13, 2010
In new Acer Extensa 5635G i install 11.2 but lan card don`t work,wireles too!Hеrе info
Code:
/sbin/lspci
07:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
09:00.0 Ethernet controller: Attansic Technology Corp. Device 1063 (rev c0)
/usr/sbin/hwinfo
[Code]..
View 5 Replies
View Related
Feb 12, 2011
I've a big question about openSUSE 11.3 x86-64 graphics card driver. How do I successfully install proprietary graphics card driver on openSUSE 11.3? My graphics card is NVIDIA GTS 250, and Compiz is working on my PC. But it's using "Nouveau" driver, now I want to install NVIDIA proprietary GTS 250 driver. I did gooogle many ways, and tried them for install driver many times many hours. I still can't successfully install it, including "blacklist nouveau", "rdblacklist=nouveau", "NVIDIA-Linux-x86_64-260.19.36.run -k $(uname -r)"
View 5 Replies
View Related
Dec 9, 2009
i am testing the opensuse 11 installation on the Eee pc (Eee Box B202). My installation source is in the network drive but i can't seem to point it to this destination because the network card is not detected. This Eee pc is using a jmicron network card and i can't seem to find any related drivers on the net.
View 1 Replies
View Related
Feb 8, 2011
Many people are having trouble with the latest nvidia drivers. I think there might be a pattern and that might lead to a solution; even if that solution is "give up with that card you're using." So, here's the first:
7600GS PCI with 32 bit opensuse 11.3 and KDE 4.6
View 9 Replies
View Related
Feb 1, 2010
I tried to install the NVIDIA graphic card drivers on my laptop XPS 1340, running with opensuse 11.2. There are two graphic cards, the integrated one and the NVIDIA one. I installed the drivers correctly by doing
wget ftp://download.nvidia.com/XFree86/Li...90.36-pkg2.run
su -c 'sh NVIDIA-Linux-x86_64-190.36-pkg2.run -q'
but when trying to configure the x-server
su -c 'sax2 -r -m0=nvidia'
I got the following error message in the /var/log/SaX.log NVIDIA: could not open the device file /dev/nvidia0 (Input/output error).
View 4 Replies
View Related
Aug 30, 2011
I have tired everything I know how to do and I can not install the driver for the rtl8191se. I read the instructions that say to run:
sudo make
I have been through this before with Fedora. Ubuntu supported my wireless card but not my display so I am switching to this OS. Does anyone know how to install the driver on 11.4 suse?
joecamel@linux-1b2w:~/Downloads/rtl_92ce_92se_92de_linux_mac80211_0003.0620.2011> sudo makemake -C /lib/modules/2.6.37.1-1.2-desktop/build M=/home/joecamel/Downloads/rtl_92ce_92se_92de_linux_mac80211_0003.0620.2011 modules
make: *** /lib/modules/2.6.37.1-1.2-desktop/build: No such file or directory. Stop.
make: *** [all] Error 2
joecamel@linux-1b2w:~/Downloads/rtl_92ce_92se_92de_linux_mac80211_0003.0620.2011>
View 4 Replies
View Related
Jun 18, 2009
I recently installed SuSE 11.1 (64 bit) on my system
AMD Phenom II 940 3.0 Ghz;Biostar TA790GX 128M Motherboard with ATI Radeon HD 3300 Graphics card built in;
4 Gb (2*2 sticks) DDR2 800 MHz RAM
The installation went smoothly, But on first restart and login (and subsequent ones too!) I get a light purple screen with a skyblue box at top left corner, with xconsole written on it. when I Left click anywhere on the screen, I get a popdown with a number of options, of which only XTerm (bash shell) and exit (logout) options work. Now I know the HD 3300 graphics card drivers are not built into the SuSE 11.1 distribution, and I have already downloaded them (Linux ones)from ATI website. I login as Superuser, and type init 3 to go to a very basic screen,login as user, change to superuser again and then run the following file i downloaded from ATI:
sh ati-driver-installer-9-4-x86.x86_64.run
The result/output at the command prompt:
Created directory fglrx-install.ubanI5
Verifying archive Integrity... All good.
Uncompressing ATI proprietary linux driver-8.602...
.....(lot of dots)...
ati-driver-installer-9-4-x86.x86_64.run: line 295: ./ati-installer.sh: Permission denied Removing temporary directory: fglrx_install.ubanI5
Once again, i tried everything in superuser login.
Also I tried making changes via sax2 command, it doesnt seem to work. A window opens where I see that my graphics card has been detected but thats about it. nothing else in that option, everything is greyed out (nothing to be selected)
View 6 Replies
View Related
Mar 18, 2010
I have an HP Pavilion dv6-2120ca and I'd like to find out where to find the graphics driver. This is the card: TI Mobility Radeon HD 4200 Graphics I plugged in my MP3 player in and it worked with Opensuse.
View 2 Replies
View Related
May 17, 2010
I installed openSuse 11.2 64bit (DVD version). Later I installed the graphic card driver. Then I noticed that it's not working well due to an improper installation (didn't use the manual that you provided here). So I uninstalled the driver. Then, after reboot, instead of a regular desktop, I get a CLI and I'm requested to enter my login information. But in the boot menu, if I enter to the failsafe option, then everything works fine. How can I change the CLI to the regular desktop?
View 9 Replies
View Related
Dec 28, 2010
I'm very new to openSUSE, so I need easy, clear instructions on how to install the driver for RaLink RT2561T wi-fi card. I have the driver and everything, I just don't have a clue on how to install it!
View 5 Replies
View Related
Dec 29, 2010
I can not install a driver for device EDUP WU2070. I have a disk with a driver for linux general. I don't know how to compile a makefile. My OS 11.3v doesn't see a device.
But when I run in Live CD mode all drivers install automatically and my WI-FI device work properly.
View 9 Replies
View Related
Apr 29, 2011
I have just installed openSuse 11.4 and have been trying to get my Edimax EW-7711In wireless card to work. I have downloaded and installed NDISWRAPPER but when I type ndiswrapper -i /path/to/rt2860.inf I get a message saying that this is the incorrect driver. However this driver drives the card for both Fedora 14 and Ubuntu 10.10, both using ndiswrapper, so what may be the problem with openSuse 11.4?
View 8 Replies
View Related
Mar 13, 2010
I recently bought a HIS HD 4670 IceQ card but can't get it to work in openSUSE 11.2 Under Windows the card works fine, so I assume there is no hardware problem. I tried this card in two computers with different mainboards, but it does not work. Several times I reinstalled openSUSE completely from scratch (tried both 32bit and 64bit versions) but no luck. The problem: Right after the installation it uses the radeonhd driver. This basically works, but without 3D (no Tuxracer...) and even 2D is slow (dragging around windows on the desktop is slow, page scrolling in firefox also).
Then I tried to install the ati proprietary driver, both from rpm (the rpm's from the "official" ati repository have a checksum error, as already mentioned in another thread!), and by downloading the driver from AMD and running the install script. The install script seems to work successfully. The kernel module is compiled and loaded. "aticonfig --initial" makes a rudimentary xorg.conf. But then, when starting X, it does not work:
- on one of the 2 tested systems, even kdm does not start, the screen simply stays black with a frozen cursor top left, even CTRL+ALT+backspace doesn't do anything - on the other system, kdm starts and shows the login screen, but when trying to start KDE kwin crashes, and the windows have no title bar (when I googled for this symptome I found lots of people also having this problem...) - trying to configure the system using sax2 didn't help, even sax2 doesn't display properly I have now spent 4 days trying to get this to work and now I'm really tired of those buggy graphics drivers, be it proprietary or open source...
Can anyone recommend me a graphics card that is approximately as powerful as the radeon 4670 (I bought this card because it is said to be the most economical card (both in price and energy consumption) that allows to play Anno 1404 reasonably well on windows), but is known to work in openSUSE 11.2, even in 3D mode (tuxracer...)?
View 4 Replies
View Related
May 19, 2010
I just got a new computer and I have been busy setting it up with openSUSE 11.2. I am trying to install the Nvidia proprietary driver for my graphics card, a Geforce GTX 260, but it will not work. I added the Nvidia repository and I am installing the driver for GeforceFX series cards but every time I restart I get a command prompt and if I try to start x it says that my card is not supported. This is really getting frustrating, I need the proprietary driver so I can play DDO with Wine.
View 2 Replies
View Related
Jun 13, 2011
I would like to use Nouveau rather than NVidia proprietary drivers. I am very experienced with Linux but a bit clueless with monitors. I got rather close to a working setup, but just can't get the resolution and maybe H/V sync frequency of my monitor correct.
My system:
OpenSUSE 11.4 32-bit
Gforce 7300
KDE desktop
Acer 21" LCD monitor, non-wide screen, it can do 1600x1200
X configuration: No x.org.conf file, and only one modified file in xorg.conf.d, namely to specify the driver "nouveau" (by the way, is that even needed??) According to lsmod, nouveau loads perfectly. However, KDE starts-up in an odd, non-useful screen resolution. 3d works, slowly, which is OK. I specifically want 1024x768 resolution, but am not able to specify a different resolution in the Display configuration section of the KDE control center (I understand that is perhaps normal).
I tried inserting text into the xorg.conf.d/50-monitor, not really knowing what to add or where and eventually got 1024x768 but the display was unstable, blinking off and on every so-often, and the screen edges were off.I am pretty sure I simply need to put information about my monitor and desired resolution into some file(s) in xorg.conf.d/ or maybe build a dreaded xorg.conf file. I know of the "cvt" utility, and I have a hunch this is part of the solution.
View 9 Replies
View Related
Jun 29, 2011
After a bit of work I got 3d acceleration (direct rendering) working on my system. Now, whenever I use intensive graphics, (certain screen savers, Google Earth overlay animations) all performs fine for a while (1-2 minutes) and then causes a full system freeze. Only solution at that point is a hard power reboot. I don't know where to look for a solution, since I can not check any diagnostic files when the system is frozen.
System:
Intel Pentium 4 CPU 3.00GHz
ATI FireGL V3100 graphics Card
OpenSuse 11.4 with radeon driver.
View 9 Replies
View Related
Mar 15, 2010
Am trying to install the correct driver for my RV710 Radeon HD4350 grahics card.which version out of these two I should install: * x11-video-fglrxG02 (for HD2000 series and later) * x11-video-fglrxG01 (for Radeon 9500 - X1900)
View 3 Replies
View Related
Mar 21, 2011
I`m trying to install Intel EXPI9402PT PRO/1000 PT Dual Port Server Adapter on my machine. I download the drivers for this card from intel web page, but I can`t make it work. I`m running OpenSuse 11.3 version. When I tried to install it for the first time I got this message:
Makefile:71: *** Kernel header files not in any of the expected locations.
Makefile:72: *** Install the appropriate kernel development package, e.g.
Makefile:73: *** kernel-devel, for building kernel modules and try again. Stop
Then I install the kernel-source package and I got this one:
Makefile:107: *** Linux kernel source not configured - missing version header file. Stop.
I also installed kernel-devel package, but I get the same message.
View 9 Replies
View Related
May 8, 2011
I have spent ages looking at similar problems but not not quite the same. I have installed 11.4/Gnome (x86) and wanted to use my GT430 card. I went here: 'http://en.opensuse.org/SDB:NVIDIA_drivers' and used the 'one click' install for current cards. All went ok until I rebooted and I got a 'gdm[1239]: WARNING: GdmDisplay: display lasted 0.846578 seconds' message. I got five of these in succession until the 'gdm[1239]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors' appeared and it popped me down to an init 3 login.
So, I deleted the blacklisting conf file so that I could get back in to Gnome on Nouveau (which I did ok). I then noticed there was no /etc/X11 Xorg.conf file so I ran /usr/lib/nvidia-xconfig to generate one (which it did) - but it made no difference. I am at a loss know after spending 8 hours on this. Any pointers would be greatly appreciated. My machine is still at fresh install state so even if I have to reinstall 11.4 it does not matter.
[Code]...
View 5 Replies
View Related
