OpenSUSE Install :: Graphics Card Driver / Everything Is Greyed Out (nothing To Be Selected)?
Jun 18, 2009
I recently installed SuSE 11.1 (64 bit) on my system
AMD Phenom II 940 3.0 Ghz;Biostar TA790GX 128M Motherboard with ATI Radeon HD 3300 Graphics card built in;
4 Gb (2*2 sticks) DDR2 800 MHz RAM
The installation went smoothly, But on first restart and login (and subsequent ones too!) I get a light purple screen with a skyblue box at top left corner, with xconsole written on it. when I Left click anywhere on the screen, I get a popdown with a number of options, of which only XTerm (bash shell) and exit (logout) options work. Now I know the HD 3300 graphics card drivers are not built into the SuSE 11.1 distribution, and I have already downloaded them (Linux ones)from ATI website. I login as Superuser, and type init 3 to go to a very basic screen,login as user, change to superuser again and then run the following file i downloaded from ATI:
sh ati-driver-installer-9-4-x86.x86_64.run
The result/output at the command prompt:
Created directory fglrx-install.ubanI5
Verifying archive Integrity... All good.
Uncompressing ATI proprietary linux driver-8.602...
.....(lot of dots)...
ati-driver-installer-9-4-x86.x86_64.run: line 295: ./ati-installer.sh: Permission denied Removing temporary directory: fglrx_install.ubanI5
Once again, i tried everything in superuser login.
Also I tried making changes via sax2 command, it doesnt seem to work. A window opens where I see that my graphics card has been detected but thats about it. nothing else in that option, everything is greyed out (nothing to be selected)
View 6 Replies
ADVERTISEMENT
Jun 25, 2010
I have unfortunately found myself unable to properly boot up openSUSE because I decided to buy the Acer Aspire with the i5 Processor.
I have the Intel Graphics Media Accelerator HD (GMA HD) graphics card, and unfortunately from all my searching online and on openSUSE, I have been unable to find a driver for this that works for linux, and in addition I don't know how to install a driver outside of a GUI.
My openSUSE boots up to the boot choosing screen (regular openSUSE or failsafe), and then that nice list of functions being done is displayed, but as soon as the daemon has started, suddenly my screen goes blank and I am unable to do anything about it. Beyond this point, my OS loses all functionability, and while I can hear it computing, I am unable to actually tell WHAT it is computing. get a driver for this and to install this driver and get this GUI running, that would be great.
View 7 Replies
View Related
Mar 18, 2010
I have an HP Pavilion dv6-2120ca and I'd like to find out where to find the graphics driver. This is the card: TI Mobility Radeon HD 4200 Graphics I plugged in my MP3 player in and it worked with Opensuse.
View 2 Replies
View Related
Feb 12, 2011
I've a big question about openSUSE 11.3 x86-64 graphics card driver. How do I successfully install proprietary graphics card driver on openSUSE 11.3? My graphics card is NVIDIA GTS 250, and Compiz is working on my PC. But it's using "Nouveau" driver, now I want to install NVIDIA proprietary GTS 250 driver. I did gooogle many ways, and tried them for install driver many times many hours. I still can't successfully install it, including "blacklist nouveau", "rdblacklist=nouveau", "NVIDIA-Linux-x86_64-260.19.36.run -k $(uname -r)"
View 5 Replies
View Related
Apr 9, 2011
I'm trying to install a driver for a Radeon x700. I downloaded the driver from the site and the sh command to install it but this is what I got.
View 2 Replies
View Related
Mar 13, 2010
I recently bought a HIS HD 4670 IceQ card but can't get it to work in openSUSE 11.2 Under Windows the card works fine, so I assume there is no hardware problem. I tried this card in two computers with different mainboards, but it does not work. Several times I reinstalled openSUSE completely from scratch (tried both 32bit and 64bit versions) but no luck. The problem: Right after the installation it uses the radeonhd driver. This basically works, but without 3D (no Tuxracer...) and even 2D is slow (dragging around windows on the desktop is slow, page scrolling in firefox also).
Then I tried to install the ati proprietary driver, both from rpm (the rpm's from the "official" ati repository have a checksum error, as already mentioned in another thread!), and by downloading the driver from AMD and running the install script. The install script seems to work successfully. The kernel module is compiled and loaded. "aticonfig --initial" makes a rudimentary xorg.conf. But then, when starting X, it does not work:
- on one of the 2 tested systems, even kdm does not start, the screen simply stays black with a frozen cursor top left, even CTRL+ALT+backspace doesn't do anything - on the other system, kdm starts and shows the login screen, but when trying to start KDE kwin crashes, and the windows have no title bar (when I googled for this symptome I found lots of people also having this problem...) - trying to configure the system using sax2 didn't help, even sax2 doesn't display properly I have now spent 4 days trying to get this to work and now I'm really tired of those buggy graphics drivers, be it proprietary or open source...
Can anyone recommend me a graphics card that is approximately as powerful as the radeon 4670 (I bought this card because it is said to be the most economical card (both in price and energy consumption) that allows to play Anno 1404 reasonably well on windows), but is known to work in openSUSE 11.2, even in 3D mode (tuxracer...)?
View 4 Replies
View Related
Mar 28, 2010
Using Ubuntu 9.10 I installed Ubuntu onto a second hard drive and everything seems to work fine except for the fact that I cannot install the driver (it says not supported or something) when I downloaded it from the website. I downloaded the driver made for Linux. The driver manager claims "no proprietary drivers." At the moment it shows to be using integrated graphics, but I need the full hardware graphics to play games. The open source alternate driver didn't work either.
View 2 Replies
View Related
Dec 21, 2009
I was looking to get glx to work with direct rendering. So i installed the nvidia drivers from the openSuSe Sight. I installed because /var/log/Xorg.O.log Said that the Nvidia card was not loaded. Long story short looks like the card is loaded but X windows... I guess GLX is not running and neither is Opengl. I still have output to the monitor. here is
[Code].....
View 9 Replies
View Related
Jul 30, 2010
I have a z9 volari Graphics card that opensuse 1.2 is recognising but the xgi driver is not present. I get the following when I startx:
auth: creating new authority file /root/.serverauth.4650
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
[Code]....
Perhaps my last post about this was too long and hence why nobody responded. So i will try and keep it simple and let the experts advise me.
I have tried installing an rpm that I got from rpm search. Namely xorg-x11-driver-video-xgi-1.5.0-6.1.i586 which seemed to install but when I did a query it said it was not installed, but when I tried to do an install again it said it was already installed ??
There is also a file called xserver-xorg-video-sis_0.9.3.orig.tar.gz which i got from this site. I have not managed to extract it properly yet but will look into that myself. It appears to have in it a makefile, so I presume it is source files and I could really do with some help in that.
View 2 Replies
View Related
Jul 16, 2011
I am running Opensuse 11.4 on a file server, based on an Intel Atom motherboard with 945G graphics chipset.I recently shut down and then rebooted the server (because I needed to switch off the power for a few minutes) after it had had been running quite happily for several weeks since the last boot. Now I cannot start X - it gives up after the line(EE) intel(0): failed to set mode: Invalid argumentI've tried googling but am none the wiser what could have caused this, or how to fix it. Excerpts from the X log file:
Code:
[ 229.187]
X.Org X Server 1.9.3
[code].....
View 7 Replies
View Related
Sep 17, 2010
I tried to install the ATI proprietary driver for an HD 5800 (Catalyst for Linux 64 bit, v. 10.8). The two main instruction sites are:
SDB:Configuring graphics cards - openSUSE
SDB:ATI drivers - openSUSE
I chose the hard way method. I downloaded the driver. Restarted SuSE 11.3 in mode 3. And as SU followed the method above, including adding the zypper programmes (which found some already installed and which installed a whole lot more). When I then attempted to run the install (sh ./atidriver-install-10.8-x86.x86_64.run) and selected automatic mode. It completed 82% and stalled attempting to install "Postprocessing Kernel Module".
I pressed control c to kill the process and attempted to re-install using the manual mode and then using the build mode. In both instances, same outcome. When I rebooted, and entered my password, the desktop did not load but sent me back to the username/password page. I can't get back in. Does not matter as I have backed up my docs.
I decided to install the proprietary driver because the colours on the desktop corrupt after the 2nd boot following a clean install. i.e. on the initial boot the colours are fine. Second, this is the 3rd effort I have made to install the driver after a clean install of SuSE 11.3 and there is no change in outcome. So, my question: anyone any suggestion what is going on and how I can install the driver successfully? Or, do I not understand the new regime in SuSE 11.3 and should I not attempt to install a new driver.
View 9 Replies
View Related
Aug 12, 2010
I was trying to get the package ready to install my Graphics card to the new update. This is the problem that I am having.
Code:
Problem: nothing provides kernel-devel = 2.6.35-21 needed by kernel-syms-2.6.35-21.1.x86_64 Solution 1: do not install kernel-syms-2.6.35-21.1.x86_64 Solution 2: break kernel-syms by ignoring some of its dependencies Choose from above solutions by number or cancel [1/2/c] (c): c Now the vanilla kernel is 2.6.35-21 were as the "default" opensuse one is 2.6.35-20. I have googled and told opensuse download search engine to look for the 2.6.35-20. I cannot find it at all.
If I upgraded to the vanilla kernel without the opensuse patches would it make my machine unstable? Or can I tell it to break some of the dependencies?
View 2 Replies
View Related
Jan 22, 2010
I did not find my graphics card in the HCL/Nvidia video cards thread. I looked in YaST for drivers & found none. My desktop pc freezes after the system loads so I cannot use my system. I understand about the level '3' boot option for tty input. How would I download/run the nvidia installer from tty?
View 4 Replies
View Related
Aug 22, 2010
the solution of my monitor is much to small. So I tried to find out, where I can change the settings of my graphic card and monitor. Unfortunately opensuse only gives me the possibility to change it up to 600x800, which is by far too small. So I thought maybe I need to install a driver... so... there I am ... having question marks around my head and wondering how to install a graphics card driver on my opensuse 11.3.???
And where to find the right ones?
My graphic card is a Matrox Mystique (no 220 or anything else!!). I checked the website of Matrix to find my drivers, but it tells me that there is no driver planned for linux. Matrox Graphics - Support - Latest Matrox drivers for legacy products But I guess I am not the only person in the world who uses this graphic card on linux, so there must be a way to make it work!!
View 9 Replies
View Related
Jun 12, 2011
I have opensuse 11.3 installed, and my motherboard has the intel i845 chipset,
one day windows had enough of the intel graphics chip and would not let me have anything but 640x480 pixels, well you cant do much with that so I put an ati card in and disabled the intenal graphics. windows was happy enough but suse could not boot - more specifically could not mount the root filesystem, saying it had errors (did a very quick fsck), could not find the journal, and I had a bad superblock. the "failsafe kernel" was no better. If I take the ati card out suse boots fine. however I do swap frequently between windows and linux and changing graphics cards between boots is somewhat irritating.
View 3 Replies
View Related
Mar 25, 2010
I have a qzd netbook with opensuse 11.2 running but I cannot get the graphics working. I have tried "startx" and get the following:
xauth: creating new authority file /root/.serverauth.4650
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
[Code]...
View 4 Replies
View Related
May 20, 2011
Caution to all using ati graphics download repository. I have been using SUSE 11.4 after an upgrade from 11.3 through zypper for months. I added ati graphics as a update repository. Software update installed two ati files. I did not notice their names.
Upon installation my graphics was acting funny so I uninstalled the two ati-files figuring I'd be back to where I was. Now I can only get into terminal window after reboot at both runlevel 3 and 5; no graphics at all. I keep getting message re: display 'null' I wish to return to original graphics configuration prior to ati downloads which, I believed used xorg drivers.
I believe I either need to revise xorg.conf file back to original which was overwritten by ati process or reinstall xorg/X11 related files. I have an ati radeon HD 3450 agp card. 32 bit SUSE w/11.4 installed and running. Anyone have a sample xorg.conf that might work or some other ideas of how to get back to where I was.
As a related question, if I do a fresh reinstall of SUSE 11.4 using dvd can I save my /home files and any /filesystem files that my special software created in root directories.
View 9 Replies
View Related
Jun 27, 2010
I got a vaio vgn-ar21s laptop that under yast reports to have a tv card: saa7131/saa7133/saa7135 Video Broadcast Decoder
However if I try to choose a tuner (bottom on the right bottom of the yast window for Manual TV card selection, I get "No tuner is available for the selected card".Can this be set up somehow under opensuse 11.2 ? I am running kernel 2.6.31.12-0.2-desktop x86_64
The card works under windows (I can see most digital tv channels [I am in the UK]), but I would prefer to use it under opensuse, of course.
View 2 Replies
View Related
Apr 30, 2011
i was trying to uninstall old nvidia driver and install new driver via terminal. i used these commands (sudo dpkg -p nvidia -173; sudo apt-get --purge autoremove) and then this is the one that froze up on me (sudo apt-get install nvidia-current)computer froze while installing the new driver. now i cant boot up ubuntu 11.04. i get the grub menu but cant boot OS. i cant get recovery mode to boot either. it stops after it reads my dvd drive. i dont remember exactly what i did to get this message but i got a message that says alloc magic is broken at 0xb7ce5c80. im assuming that i have no graphics card driver installed and this is why i cant boot. is there anyway to boot from a live cd and manually install the graphics card driver? im on a dual boot with win7 and upgraded from ubuntu 10.10 so i dont really want to do a clean install and have to install tons of software etc.
View 4 Replies
View Related
Jul 10, 2011
Does any one know of an driver for the ATI x1200 graphics card? I believe this is stopping me from logging in.
View 5 Replies
View Related
Jun 6, 2010
After having some trouble with Intel graphics I decided to pick up a PCI Nvidia graphics card. Now I am wondering what driver to use. Is the open source drive good enough to use or should I install the Nvidia driver? I know that things are generally easier with the default driver, especially for support on older cards, but I would like to get the best performance I can. This is for my Dad's computer, so he won't be playing any games, but if it will help with 2D and video that would be great.
The card is an Geforce FX5200 fanless card, I've heard they are well supported in Linux.The computer is a P4 Dell 3000 with Ubuntu desktop 10.04 32bit.
View 2 Replies
View Related
Feb 17, 2011
It found it in 10.04 on its own, in 10.10 will it do the same?
something went wrong with my upgrade I'm running in safe graphics mode even though I'm in my regular desktop session.
View 1 Replies
View Related
Apr 28, 2010
I revived my old desktop (failed psu), and installed debian squeeze using netinst. It has a nvidia geForce 7600GT card. The driver in squeeze does not work very well, so I downloaded nvidia driver-installer. When I run it, it comes back with an error saying the kernel (I assume the nvidia graphics kernel) is compiled with gcc4.3, but the system is using gcc4.4. Using synaptic manager, I installed gcc3.3, but same error.
Next I tried to uninstall gcc4.4 and it gave a warning the system might not be usable. I did not understand it, but I went ahead and uninstalled gcc4.4 and guess what, the system is not usable, and I have to re-install squeeze. Not a big loss, since I do not have much in it. How to install this nvidia driver, specifically, how do I get switch to gcc4.3 from gcc4.3? Also, the squeeze install gave me 2.6.33-trunk-amd64, and 2.6.33-3-amd64. How do I get rid of ...trunk-amd64? Do I just delete it from grub?
View 10 Replies
View Related
Jan 4, 2011
Finished installing Ubuntu 10.10 in my XPS15, intel i5 4g ram, nvidia GT 420M graphics card,
problem is when i go to additional drivers, the driver listed (Nvidia accelerated graphics) when I install it and reboot it the computer starts on the terminal, no graphic interface. All I get is the black screen asking me login and password, when I enter them, just get the terminal prompt in a black screen.
View 3 Replies
View Related
Dec 9, 2009
i am testing the opensuse 11 installation on the Eee pc (Eee Box B202). My installation source is in the network drive but i can't seem to point it to this destination because the network card is not detected. This Eee pc is using a jmicron network card and i can't seem to find any related drivers on the net.
View 1 Replies
View Related
Feb 3, 2010
i don't know what this os want from me one moment everything is fine the next it's not first of all it started asking me to choose resolution on startup it said undefined b31 and i have to press enter then 366 for 1024x1280 32 bit how can i fix this problem how can i define 366 resoultion as default and how can i update the screen card driver for 10.1 i have ati hd 3650 agp card. and by the way what are the cool things i can do with graphics here except the rottaing windows.
View 1 Replies
View Related
Apr 15, 2010
How can I find video driver for nvidia geforce 320M graphics card for ubuntu 9.l0?
View 4 Replies
View Related
Aug 30, 2011
I have tired everything I know how to do and I can not install the driver for the rtl8191se. I read the instructions that say to run:
sudo make
I have been through this before with Fedora. Ubuntu supported my wireless card but not my display so I am switching to this OS. Does anyone know how to install the driver on 11.4 suse?
joecamel@linux-1b2w:~/Downloads/rtl_92ce_92se_92de_linux_mac80211_0003.0620.2011> sudo makemake -C /lib/modules/2.6.37.1-1.2-desktop/build M=/home/joecamel/Downloads/rtl_92ce_92se_92de_linux_mac80211_0003.0620.2011 modules
make: *** /lib/modules/2.6.37.1-1.2-desktop/build: No such file or directory. Stop.
make: *** [all] Error 2
joecamel@linux-1b2w:~/Downloads/rtl_92ce_92se_92de_linux_mac80211_0003.0620.2011>
View 4 Replies
View Related
May 17, 2010
I installed openSuse 11.2 64bit (DVD version). Later I installed the graphic card driver. Then I noticed that it's not working well due to an improper installation (didn't use the manual that you provided here). So I uninstalled the driver. Then, after reboot, instead of a regular desktop, I get a CLI and I'm requested to enter my login information. But in the boot menu, if I enter to the failsafe option, then everything works fine. How can I change the CLI to the regular desktop?
View 9 Replies
View Related
Dec 28, 2010
I'm very new to openSUSE, so I need easy, clear instructions on how to install the driver for RaLink RT2561T wi-fi card. I have the driver and everything, I just don't have a clue on how to install it!
View 5 Replies
View Related
