I've just installed 11.2 KDE 64bit and I'm having trouble getting CUPS setup. I have a hp5440 deskjet that is not listed but I have used another model in the past with another distro. But when I put in my username and password it doesn't take it. there is no other password. How do I set up CUPS? Can I used hplip instead?
View 3 RepliesI want to setup my Epson Stylus (515W)-A letter before the 5 but not sure what. Basically when I open CUPS I click on add on new printer, I enter add printer but then the page says access denied. Also this is a network printer.
View 2 Replies View RelatedI have been using Opensuse since 11.0, and I never had any problems with the setup of CUPS printing (university based). Now for the first time, after many months of flawless printing using 11.2, after installing 11.3 the printing has stopped working. I use the same method: Print via print server machine -> CUPS server (IPP) and I test the connection. In my 11.2 it shows "OK", in 11.3 (I also tried with firewall off) I am getting the following (I have substituted the actual values with xxx for privacy).
[Code]...
The support unit here at uni doesn't support linux. Only Windows and Mac OS. And I can't quite figure how to get the printing to work. For windows I have to go to:
Code:
\print.plan.aau.dk I think its a samba print server. From here (on windows) I can choose which printer to use. There is an accounting system, so I need to log on with username and password. Is there a way to set this up easily in OpenSUSE 11.2 64bit KDE4?
asus K60IJ intel 4400 dual-core 4gb ram trying to setup suse 11.2 64bit as dual boot. works fine with win7 in dual boot and system boots great. been following forums to setup wireless. after doing all term commands, it see's both built in wireless (atheros ar9285) on the pci-e and the usb verizon broadband modem as (curitel brand modem). after checking kernal dmesg, it see's devices but looking at usr/sbin/iwconfig, it see's no eth0. checked at the asus website and see nothing on getting any kind of ethernet drivers.
View 7 Replies View RelatedI am running Suse 11.3 64bit and OpenOffice 3.2.1.4 it installed with the system.OpenOffice's latest is 3.3 something, is there a repository that I can add to continuously update the program? Or do I need to completely remove the present program and install the latest from OpenOffice.org? It would appear that the one that came with the system was pieced together by the Suse team - do they update this at all?
View 7 Replies View RelatedI have a printer configured on my Ubuntu server using CUPS amd made it available to the local network. The printer is recognized on my other Ubuntu machine without any problems.
But on my Suse laptop, the printer is not recognized. Using the YaST printer Configuations, I choose the option "Recieve Printer Information from Remote CUPS servers. But no printer is found.But... when I choose Do All Yout Printing Directly via One Remote CUPS server and enter the correct IP address (192.168.1.100), the printer is found andI am sure the printer info is broadcasted because it shows up on my second Ubuntu PC. But why is it not recognized by default on my Suse machine
i am trying to set up LAMP on an old pc i have installed linux, apache, mySQL and PHP following this guide Installing Apache2 With PHP5 And MySQL Support On OpenSUSE 11.3 (LAMP) | HowtoForge - Linux Howtos and Tutorials. i have installed phpMyAdmin but when i try and acess it i get this error
Error
MySQL said:
Cannot connect: invalid settings.
phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in your configuration and make sure that they correspond to the information given by the administrator of the MySQL server.
[Code]...
Today I got update notification. I type in terminal yum update, and get this error: Quote: Error: Missing Dependency: libnetfilter_conntrack.so.1()(64bit) is needed by package iptstate-2.2.1-5.fc11.x86_64 (installed) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest
I removed iptstate.x86_64, again run yum update, and than, ibnetfilter_conntrack got installed. I tried to install iptstate.x86_64 again, but i get Quote:
[Code]...
I am told my Epson Perfection V100 Photo scanner requires iscan firmware. I tried to install from a web site and was told I already had a newer version installed. But the YAST hardware setup insists iscan is not installed.
View 6 Replies View RelatedI recently bought an HP OfficeJet 6500 AIO printer. Since the printer has ethernet connectivity, I have managed to setup the printer with the 32bit openSuSE 11.2, 11.3 machines I have in my network. However, the 64bit 11.1 is another beast. I cannot make the printer work. The default and updated from officials repos hplip does not contain the PPD file for the printer/scanner/fax.I added the "Printing" repository (Index of /repositories/Printing/openSUSE_11.1) and downloaded the 64bit versions of hplip, hplip-hpijs packages. Now, the issues:hp-setup does not run with "Segmentation fault" error! Although I can see the printer, setup and modify it's configuration, cups cannot print, not even a test page.The errors I have are:
Code:
Unable to execute /usr/lib64/cups/filter/hpcups: No such file or directory
Regarding the 1st error, I "solved" it by using the hplip-qt3 package from KDE_3 repository. And when I used that version of hplip, (3.10.9-4.2, instead of the 3.10.9-31.1 of the Printing repository), I had no more filter related problems (foomatic etc).For the second one, it is obvious that the problem is related to the location of the 64bit filters.The /var/log/cups/error.log has the following lines:
Code:
I [13/Jan/2011:20:50:52 +0200] [Job 60] Started filter /usr/lib64/cups/filter/pstops (PID 30039)
I [13/Jan/2011:20:50:52 +0200] [Job 60] Started filter /usr/lib64/cups/filter/pstoraster (PID 30040)
code....
I wish to update the drivers for a printer which is being shared using samba - can I just upload the new drivers and overwrite the old or do I need to delete the old drivers before uploading the new ones
View 3 Replies View Relatedwe are having new printers. At the moment we over 1000 machines on multiple sites but no print server they are manually added on the machine ( I know don't ask).
Anyway there is no way they would let use a windows server so the only option I have is to use linux however I little unsure if it is capable of doing the job I need it to do. Basically I want to add the printers on the linux server either using samba or ipp (I would assume samba would be best).
The reason i want to do this is when we have to do around the machines I just want to go around the machines and just the map the printer and it brings down the driver and config etc as we want them to duplex. The issue is I been trying to gain information on the internet and getting conflicting information apparently I can add the windows driver onto the server so when I map the printer it brings it down. However some guides state you still have through the whole process of adding the printer and then choosing the driver etc. Which kinda of makes it pointless to do the printer server since I would already have to do this anyway if we don't have one.
I just want to go be able to go around the machines and for example click star run and do something like \192.168.1.1printer01 and then it done kind of thing.
I'm using Ubuntu 9.10 and previously had a separate partition with another distro on it. I decided to delete the other distro's home and swap partitions and install XP in place of it. I've been following these instructions: [URL] and [URL] I have gotten to the point where I am booting to the XP CD and want to install it, but I get the message, "Setup did not find any hard disks installed on your computer" when I should be getting to the screen that asks me to select a partition to install XP on. This is what my HDD looks like in GParted:
I want to install XP in the unallocated partition, but I have a feeling I screwed up somewhere along the way and probably don't fully understand the whole thing. Even if I try to format the unallocated partition to NTFS I can't make it a primary partition (I assume because it's within sda2). The very last thing I want to do is delete my Ubuntu partition and start from scratch, but if that's my last option let me know.
I'm trying to use the set application to configure Apache. I'm getting a "setup: command not found" error when I type in "setup" at the command line.
However when I try to install setup with yum, it tells me that setup is already installed.
I'm logged in as root. CentOS 5.5.
Is it possible to have both 32 and 64bit java installed? I am trying to run the java SAP GUI. Im using F12 64bit and have got a working 64bit java. The SAP GUI errors when trying to connect and it looks like it wants 32bit. I found a doc saying to run the following which I have done but still not working.
export PLATIN_JAVA=/usr/java/jdk1.6.0_06/jre/bin/java
export PLUGIN_HOME=/usr/java/jdk1.6.0_6/jre/plugin
export JAVA_HOME=/usr/java/jdk1.6.0_6/jre
changing to my location of java. My java setup is as follows but im not sure whats going on.
java -version
java version "1.6.0_17"
Java(TM) SE Runtime Environment (build 1.6.0_17-b04)
Java HotSpot(TM) 64-Bit Server VM (build 14.3-b01, mixed mode)
[ltodd2@UK00855F java]$ alternatives --config java
There is 4 program that provides 'java'.
Selection Command
-----------------------------------------------
1 /usr/lib/jvm/jre-1.6.0-openjdk.x86_64/bin/java
2 /usr/lib/jvm/jre-1.5.0-gcj/bin/java
[code]....
I'm trying to get Rigs of Rods working on Fedora, but I've run into problems. RoR uses wxGTK development version 2.9, but Fedora only uses the stable 2.8. When I compiled and installed wxGTK and other RoR depencies not available with yum, some installed to /usr/local/lib and not the CMake expected location /usr/lib64 (LD_DEBUG=libs /home/user/ror-trunk/bin/rorconfig) I had to add "CMAKE_CXX_FLAGS:STRING=-ldl" to CMakeCache.txt to get RoR to compile, and tried adding "CMAKE_LIBRARY_PATH:PATH=/usr/local/lib" and "wxWidgets_LIBRARIES:PATH=/usr/local/lib" to try and fix
ldd rorconfig | grep -i libwx
libwx_baseu-2.9.so.1 => not found
libwx_gtk2u_core-2.9.so.1 => not found
libwx_gtk2u_html-2.9.so.1 => not found
libwx_baseu_net-2.9.so.1 => not found
libwx_gtk2u_adv-2.9.so.1 => not found
but it didn't work. ldconfig hasn't helped either.
Just installed wine from repository.Trying to install a windows application, but getting the following:
$ wine "f:Setup.exe"
Trying to load PE image for unsupported architecture (I386)
Trying to load PE image for unsupported architecture (I386)
[code]...
I'm trying to install Ubuntu 10.10 64 Bit but when the Setup loads, the fonts are missing, instead I see a lot of squares [][][][][] [][] [] [][][] and I can't continue because I can't read anything, I try to change language at boot menu but I can't solve it. Also I have tried to install it into a VirtualBox, but the problem is still there. I have installed Ubuntu 10.04 64 Bit and it works perfect, I downloaded the ISO today, this is the finale release. What can I do?
This is my screenshot:
I'm having a problem trying to set up my HP OfficeJet 6310 printer with Fedora 12. This is with a clean install, SELinux disabled and Seems to be some issue specific to Fedora, as I've used the same setup with the same hardware without problems in other distributions. I have installed all the HP files I believe should be installed. Anyway, my printer is on my wireless network. I can see the printer on the network, as is the case with my other computers.
I followed the standard setup I use with any other distro....open a terminal and enter "hp-setup." The HP Setup utility opens and I go through the standard procedure of choosing /Network/Ethernet" as my means of connecting. Moving on, the HP OfficeJet 6310 is found without a problem. When I attempt to "Add Printer," however, I am then getting an error. The error shows, "Printer Queue Setup Failed. Restart CUPS and try again." Looking at [URL], I get to CUPS but can get nothing there so far as a printer goes.
I have recently switched to Ubuntu 11.04 64bit from Windows 7. Since installing 11.07 I have experienced random disconnects, slow speeds and just overall poor performance from my ethernet card. Looking into the issue further I noticed that the driver installed for my NIC is "driver=r8169", but the actual NIC card is "product: RTL8111/8168B PCI Express Gigabit Ethernet controller" which I think pretty much says I should be running the 8168 driver.
When I run lsmod I only see "r8169 " installed. How do I go about getting and installing the r8168 driver? I am pretty sure I just need to install this driver and then blacklist the r8169 in blacklist.conf. Any clarification would be great.
I have installed centos 5 64 bit in my machine but all the dependencies like php, httpd, glibc, gcc, gd, openssl and others are 32 bit, I need them to be updated to 64 bit.
View 7 Replies View RelatedI have had no problem installing Fedora OS on any of my Dell servers prior to this post. Anyway, I wouldn't call this a problem but recently, we bought another DELL server with Quad Core, 4GB, etc... AND this model has 2 swappable SAS Harddrives.
I wouldn't call myself an expert but then again I am not a newbie too. However, I have never setup any RAID before and now I am forced to setup RAID1 on this server. So, in a way, I am a newbie in setting up RAID
Would someone please point me in the right direction as I have no idea what I am supposed to do to setup the RAID. FYI, I will be installing Fedora 10 64bit on this server. I would appreciate if you can start from the very beginning, ie. partitioning, formatting the harddrives during OS installation, etc..
The problem relates only to the configuration of services in text mode ("setup", part of the setuptool package). The setuptool package is "setuptool-1.19.4-2.fc9.x86_64". There is no "Services configuration" menu when I start "setup". The tools listed in the setup window are:
- Authentication configuration
- Firewall configuration
- Keyboard configuration
[code].....
IMHO, the reason I don't have a services configuration tool is the missing services configuration files "98services" and/or 99"services" (or something like that) from the setuptool's configuration directory. (Please correct me if I am wrong.) Can someone please let me know what information should be in those two files, and what are the correct file names? Without them I cannot change the services on this computer. (FYI, the GUI (system-config-services) works, however, I need to run this computer in text mode.)
I'm trying to setup Flash on my Fedora 14 x86_64 machine. I originally (mistakenly) ran through the instructions for the 32-bit version (posted here [URL]). I'm now trying to complete the instructions for the 64-bit version with 32-bit wrapper. However, I run into the following error.
Code:
[Walt@localhost]$ su -c 'yum install nspluginwrapper.{x86_64,i686} alsa-plugins-pulseaudio.i686 --disablerepo=adobe-linux-i386'
Password:
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list [URL] : [Errno 14] PYCURL ERROR 6 - ""
Trying other mirror.
Setting up Install Process
Package nspluginwrapper-1.3.0-15.fc14.x86_64 already installed and latest version
Resolving Dependencies
--> Running transaction check .....
Transaction Check Error:
file /usr/share/doc/glibc-2.12.90/NEWS from install of glibc-2.12.90-21.i686 conflicts with file from package glibc-2.12.90-17.x86_64
file /usr/share/locale/en@shaw/LC_MESSAGES/atk10.mo from install of atk-1.32.0-1.fc14.i686 conflicts with file from package atk-1.30.0-5.fc14.x86_64 .....
I know this is listed somewhere but I cannot seem to find it -
How to I add a root users to access the 127.0.0.1:631 interface for CUPS?
Deskjet-F4400-series
--------------------
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: usb://HP/Deskjet%20F4400%20series?serial=CN9C1CK70705C5
PPD: /etc/cups/ppd/Deskjet-F4400-series.ppd
[code]....
how do I get the printer installed in hplip? I can print but cannot scan. xsane will not recognize printer. Jaunty 64bit 2GB Ram 350GB HD
Running: Ubuntu 10.10
I'm in a bind and I don't know how to get what I want. Nmap shows ipp running cups on port 631. Great, simple enough I uninstall cups, along with its dependencies. A new portscan reveals that the port is closed SUCCESS, but... Ubuntu Update Manager nags me @ every restart about the "important security" updates. I can't lock the version of cups in Synaptic, because cups is not installed! So you see I'm in a bind. If I have cups installed I have an open port, and if I uninstall cups the update manager nags me. What do I do? I've tried:
- stopping the cups service and issuing the chkconfig cups off command... (doesn't close the port)
- uninstalling cups... (update manager nags)
- fuser -k 631/tcp (great, but @ reboot the port is still open)
Please teach me how to close this port / stop this service / tell update manager to shove cups.....
So I decided to try something new and fresh. I wanted to try ubuntu. So I download the 64bit version from here. I made a 25GB partition. I then Wubi found out I didn't need the original file since it was downloading something else. I installed it, rebooted.
Windows comes up with a prompt:
Boot from:
Windows 7
Ubuntu
I click on Ubuntu. This comes up: [URL]. I am fairly new and I don't know what to do. I did research and nothing really showed. I then burned the said 64bit version and tried to do a Live CD but it didn't reboot into ubuntu. I really want to try ubuntu? I am going to re-install again.
Been working with this problem for over a week now and has come to a dead end, I have installed pureFTPD with MySQL on Debian 5 Lenny 64bit. My problem is I can't login with the users in the sql-database, but for some strange reason, I'm allowed to loggin as anonymous. Unix users can't login either.
I have followed the guide on: [URL]..
- Created a ftpgroup and ftpuser.
- Created a database ftpd
- Created a user vhosts and given access to ftpd db
My configurations files
/etc/pure-ftpd/auth/30mysql
Code:
/etc/pure-ftpd/db/mysql.conf
/etc/pure-ftpd/db/mysql.conf
[Code]...