OpenSUSE :: Gnome No Longer Starts After Update?
Jan 21, 2011
since the last SuSE online update (last Wednesday?) the X server no longer starts on our notebook (ATI HD 4200) so we only have the consoles available, which limits the WAF heavily . We were using SuSE 11.3 with the Gnome desktop for about one months and it worked smoothly, but since the update (which included a kernel update to 2.6.34.7-0.7) the X server tries to start 5 times and then gives up. All logfiles end with:
Code:
...
[ 13.899] Segmentation fault at address 0x3c
[ 13.899]
Fatal server error:
[Code]....
I used the ati driver ati-fglrxG02-kmp-desktop, version 8.762_k2.6.34.0_12-31.1 from the ATI Suse repository. To solve the problem I already switched to the Xorg driver which lead to a color distorted display but no segmentation fault. But I'd like to get the ati driver running again.
View 9 Replies
ADVERTISEMENT
Feb 22, 2010
opensuse v11.2, linux 2.6.31.12-0.1-desktop x86_64gnome desktopLast week (Friday, 19-Feb-2010) evolution worked. Today it does not.The first attempt yielded this:
Code:
> evolution &
jmoe:/home/jmoe> *** nss-shared-helper: Shared database disabled (set NSS_USE_SHARED_DB to enable).
[code]....
View 1 Replies
View Related
Apr 9, 2011
It was running squeeze before it became stable. X was running fine and loading automatically on booting. Then I did not use it for some time. Then I ran apt-get updates and upgrades after squeeze became stable. A few packages were kept back. So I did aptitude dist-upgradeIt installed some things and maybe removed some things. After that it will boot only toconsole. When I do startx on the command line, X session starts and everything seems normal. But it will not boot to the GUI like before. I also checked in the Synaptic and saw xorg and xserver-xorg still installed
View 11 Replies
View Related
May 25, 2010
I have been running thunderbird.2.0.0.24+build1+nobinonly-0ubuntu0.8.04.1 successfully for some time now under Hardy. This morning I tried to run it and I get the "wait" indication but then nothing. I looked in my home folder and the folder .mozilla-thunderbird seems to be liked to .thunderbird, but both are listed in red and black. (Doesn't sound good.) I saw a similar bug for a newer version of thunderbird, but the symptoms in my case seem different.
View 2 Replies
View Related
Aug 26, 2011
after upgrading 11.3 to 11.4 with zypper dup my logical volumes are no longer accessible The YAST Partitioner recognize them as Linux Raid but I could not mount them.
linux-dv06:~ # blkid
/dev/sdb1: UUID="3ed0f7a9-8986-254c-a14d-c8941769f33a" UUID_SUB="b558e84e-6369-8803-f65f-455bd0e5f0f7" LABEL="linux-2zun:0" TYPE="linux_raid_member"
/dev/sda1: UUID="482595d1-cbf0-43fb-8026-1ed4d1229fbc" TYPE="ext4"
/dev/sda5: UUID="f30bb3a9-2690-403f-9f45-45c3379a512b" TYPE="ext4"
[Code]....
View 2 Replies
View Related
Jan 31, 2010
I have a problem. I'm using the latest Debian stable, Lenny. I am trying to get my usb wifi card working.
The Debian wiki advised me to upgrade my kernel to 2.6.30 using backports, because the drivers for my wifi chip are supposedly in the newer kernel.
So thats what I did. The install went fine. However, after rebooting the computer hangs when it is starting gdm. Only the desktop background appears with some fuzzy stripe over it, the mouse doesn't respond. Pressing ctrl+alt+f1 does nothing. I can only restart with ctrl+alt+del.
I can still use the computer with the old kernel. No problems there. I tryed disabling GDM and rebooting again with the new kernel. It boots up and works fine on command line. However when I type startx it hangs, just like before.
I'm not an expert, but I'm suspecting there might be problems with the graphic drivers in the new kernel.
When I installed lenny at first, X started fine. However 3d acceleration was not functioning. I got help from IRC, I had to install some package to enable direct rendering. Don't remember which one anymore.
Here's what lspci gives for VGA:
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS
View 1 Replies
View Related
Sep 11, 2011
Trying to start a running installation of virtualbox I get:
And it seems that it doesn't work with the new 275 build I got pushed when updating. Updating virtualbox didn't help. Besides uninstalling the 275 version of nvidia and installing the 270.
View 4 Replies
View Related
Oct 6, 2010
I recently applied a bunch of updates to my guest OS (Ubuntu) inside VirtualBox (NOTE: NOT updates to virtual box. Updates to the OS) and now on startup, I get the error:
"An error occurred while mounting /media/share. Press S to skip mounting or M for manual recovery"
I tried a fix which said to comment out the mounting in /etc/fstab and instead put it into rc.local, but this does not work.
Also, when I press "M" to try it manually and type:
mount.vboxsf -w mysharedfolder /media/share
I get the error:
mount.vboxsf: mounting failed with the error: No such device
But before I updated Ubuntu, that shared folder worked perfectly!
View 1 Replies
View Related
Jan 6, 2011
I was using tripleboot system in one hard drive. That included Windows 7,Ubuntu 10.10 and Ubuntu 11.04. And yesterday I decided to added openSUSE 11.3 at another partition. I'm using Ubuntu 11.04 grub2 as bootloader.
At first there was no problem. All OS detected well, but after opeSUSE online updates last night my openSUSE partition won't boot. First, at boot I chose openSUSE and it said "Boot kernel first" and nothing happens. And then I boot to ubuntu and ran update-grub then I saw grub no longer detected openSUSE partition.
View 9 Replies
View Related
May 30, 2010
I'm running CentOS 5.4 on i386 machine with 2.6.18-194.3.1.el5Whenever I login into Gnome, a gnome-termial window comes up. Instantly title says root@localhost before settling with user@localhost with current directory as ~/Downloads. Only happens with my particular user account (normal user), not with root as I tried. I also have KDE, Xfce, Fluxbox as other option at login, but terminal only shows up when I log into Gnome (not kde, xfce or fluxbox)I've done and
1. cronetab -e
Nothing there.
2. Don't have ~/.xinitrc ~/.session
3. Nothing in ~/.bashrc or ~/.bash_profile
4. Nothing in /etc/rc.local
View 4 Replies
View Related
Feb 6, 2010
I've installed F12, updated to today. I've set it to boot to runlevel 3. That works. If I run startx, X starts - I see the mouse cursor and the blue/green background. But no panels. No desktop icons.
I tried switchdesk kde, then startx. Same thing. Except kde is running because if I right-click on the desktop, I get a kde dialog that allows me to start an app.
Tried switchdesk gnome. Same thing. Rebooted, same thing.
View 9 Replies
View Related
Nov 22, 2009
Where can I put a script so that it'll be run whenever gnome starts but not kde? I tried creating a file called .gnomerc in my home directory but that didn't work. I'd prefer to be able to do it without the "Startup Application" interface.
View 6 Replies
View Related
May 26, 2010
I love Ubuntu but since upgrading to 10.04 have 2 probs. The first, which I have posted in another thread, is the splash screen. The second is this: with compiz, startup occurs in this order:
1. Gnome do dock and pointer appear on black background with no panels or desktop
2. Some hard drive activity
3. 10 secs no hard drive activity still no desktop
4. Gnome Desktop and panels finally appear with wireless already connected
It seems to me that the Gnome/compiz desktop is loaded only after everything else, including wireless and all services/processes. Compiz works fine, I am not short of ram or resources (2 Gb + Core 2 duo@2.7ghz). My question is then, is there a way to change the order of startup so that the desktop/compiz appears more quickly?
View 3 Replies
View Related
Aug 7, 2010
I have just started up Kubuntu, and it shows the Ubuntu desktop instead of Plasma. Before this, the only change I did was remove my Broadcom WiFi card because Kubuntu sometimes couldn't boot because of some error mentioning the bcm driver and phy5.
I removed the card, and no errors on boot. Now, I can't get on the internet because Kubuntu can't connect to anything. I see all of the networks, but I guess GNOME is interfering with Network Manager...
View 6 Replies
View Related
May 23, 2011
i installed Opensuse oneweek ago.i use gnome and kde.i want to update my gnome to 3.how to do this?i think my current version of gnome is 2.6
View 1 Replies
View Related
Feb 8, 2010
How do I run a script after gnome desktop starts? I want to run asterisk -rx reload as a command or a script AFTER gnome desktop (gui) loads, not during the boot process.For some reason my trunks are not loading in asterisk. If I set asterisk -rx reload in a script and run update-rc.d I can see the script run as everything boots but my trunks don't load. If I run the command after the gui loads the trunks reload and go online.
View 1 Replies
View Related
Oct 14, 2010
I did a clean install of 10.10 on my Asus A6R laptop today. Previously i had 10.04 on it.
After installation and the first reboot my GNOME won't start in normal session. If I select Ubuntu Desktop Edition (safe mode) everything works fine, but on the normal Ubuntu Desktop Edition session, GNOME just won't start. I have a mouse cursor that i can move around and a normal background. Also i can hear the usual startup sound.
View 9 Replies
View Related
May 11, 2011
I have updated GNOME 3 and it no longer works. Having suspected extensions the problem I have manually uninstalled all extensions via command line. This got me to log in instead of the problem screen. However, the desktop is entirely unresponsive, after log in it no longer responds to anything, although the mouse still tracks.
View 9 Replies
View Related
Feb 7, 2010
I ran an update after installing the OpenSuse 11.2 Gnome Live CD and could not start Gnome.Signing in would only get me a blank screen with wallpaper.Changing the display manager in /etc/sysconfig/displaymanager to kdm (from the default gdm) resolves this issue for me:DISPLAYMANAGER="kdm"
View 2 Replies
View Related
Jul 14, 2010
unable to use Gnome when update to 11.2
View 2 Replies
View Related
Sep 17, 2009
Whenever I play streaming videos, (mpg, wmv, etc), the volume will move from where it's set to maximum level. Then I have to adjust the sound. If I play another streaming video it will do it again. I'm using F11 with Gnome. How to stop it from happening? No matter how I adjust player's volume, it starts off at maximum level. This is my sound info I'm using:
Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
View 5 Replies
View Related
Feb 4, 2010
For some reason is not updating. Not sure why, Use KDE for most everything, but have some GTK apps installed.Not sure where to look to get past this error message. I've checked in yast and all the updates are there. did a rpm --rebuilddb, but this hasnt resolved the issue.
View 1 Replies
View Related
May 22, 2011
My openSUSE 11.4 adventure continues apace, and is brilliant! However, recently the Gnome 3 Software Updater has begun to show me an update I cannot get and actually I don't think I need. It doesn't turn up when updating via YAST, which is fine, but sometimes the Software Updater is a handy thing, and I don't know why this should appear.
The update is xorg-X11-server - Mesa 4546 noarch. This seems to be for Radeon and RadeonHD cards, of which as an Nvidia user I have neither. Like I say when using YAST there's no sign of it, but it just turns up in the Gnome 3 Software Updater every day. If I try to install it it tells me there are failed dependency resolutions and it doesn't install it. Is there anything I can do to remove this unwanted update from the Gnome 3 updater?
View 3 Replies
View Related
Jul 14, 2010
yesterday I try to update my system to 11.2 After that my GNOME didnt start in automatic mode ( I`m not able to start GNOME by hanD) What I have to do?
View 9 Replies
View Related
Jun 10, 2009
I upgraded Fedora 10 to Fedora 11 via preupgrade. And now system succesfully boot, but Gnome doesn't starts (i think). There is only black screen and I can only write there.
View 14 Replies
View Related
Apr 30, 2010
I have a minor problem with my "Update Applet 2.28.0" in Gnome. It occurs when I want to make the applet do one or more suggested update(s). It always asks me for the password of superuser/root: "Authenticate : Authentication is required to update packages. [...]". I think under my installation before (11.1 maybe updated from an older version) I could tell the automatic/semi automatic updater to remember the su password (in YaST or in the authentication dialog?).
In the help manual on my computer (and in the internet) there is the possibility to make the updater remember the password via policy kit: ("Access to all privileged operations is controlled via PolicyKit." See: GNOME Documentation Library : gnome-packagekit Manual : Introduction) I could not find any policy kid or any other possibility to give to the automatic updater (or its user) that privilege permanently (=to remember authorization). I think on a system with more (real) users this could be a real problem (not just an inconvenience).
View 9 Replies
View Related
Apr 30, 2011
Just updated to Ubuntu 11.04 this morning, and was immediately overwhelmed. The new panel layout and sidebar thingy looks pretty sweet at first glance, but I can't find a durn thing. :s But to the point, went to run World of Warcraft after the update and the launcher starts, then after hitting play a fatal error pops up.
Code:
This application has encountered a critical error:
Fatal Exception!
Program: Z:home imGamesWorld of WarcraftWow.exe
ProcessID: 70
Exception: 0xC0000005 (ACCESS_VIOLATION) at 0023:F751D270
The instruction at "0xF751D270" referenced memory at "0x00000000". The memory could not be "read". And then of course the other Blizzard error nonsense. I know this isn't so much a Ubuntu thing, but has anyone else maneuvered around this or have any ideas for a fix?
View 8 Replies
View Related
Jun 26, 2010
The automatic updater cannot install bundle-lang-gnome 2233: "A protected system package cannot be removed" ("Ein geschtztes System-Paket kann nicht entfernt werden.")Detail info: "Subprocess failed. Error: RPM failed: error: package bundle-lang-gnome-extras-de-11.2-19.21.1.noarch is not installed"
View 1 Replies
View Related
Dec 2, 2010
I can no longer launch an email to a contact from gnome-do. I select a contact (using Gmail Contacts plugin) in the first pane, "Email" in the second pane, hit return and get nothing. I use Evolution as my email client because I like the tight integration with the gnome desktop. Previously, in Lucid 10.04 if I'm remembering correctly, this action in Gnome-Do would launch an Evolution email window with the To: field already populated. I'm running 32-bit 10.10 Maverick. Evidently there was a similar bug for Thunderbird that has been fixed. [URL] And something similar when using chrome as preferred email client: [URL]
View 4 Replies
View Related
Feb 14, 2011
I've installed Squeeze on my two machines and now I discover that the Gnome Time GUI no longer has the ability to control NTP. Did they move the NTP GUI somewhere else or did we go backwards on this one?
View 6 Replies
View Related
