Is there any way to stop Dolphin from creating .directory files in all my directories when I am viewing hidden files?
I am pressing Alt+. to view hidden files in a directory.
Other file managers seem to do it fine.
I've discovered that Dolphin seems to lose random files when copying many large folders.
I first noticed this a few months ago when I tried to copy my music library from one folder to another on the same HDD. It consisted of around 600 folders and 6500 files. During the copy there were no errors but after the copy I found that some of the newly copied folders were missing files. I put it down to human error or a glitch.
Yesterday I tried to copy 13 folders containing rips of some of my DVDs. Each folder basically had one film of either 700MB or 1.4GB. Again no errors showed up during the copy but I found 3 of the newly copied folders were empty.
It's not so critical with music or films but I can't afford to lose work data like this.
Has anyone experienced or seen a similar problem with Dolphin? I'm going to have to do some more extensive testing but this is not good.
The first time I noticed the problem I was running KDE4.3.4 (I think) and now the latest was with KDE4.4.0.
openSUSE 11.1, KDE 4.4.1
I'm getting ~/.nfs file being generated and just filling up
Does anyone know the cause - and how to stop it before it fills my HDD?
How do I edit a file (config file, etc.) in KWrite (instead of VI) from the bash shell?I can't seem to "see" certain files using Dolphin and the only way I can locate/see them is using the shell but I'm a complete VI newb and would rather use KWrite for the moment.
View 8 Replies View RelatedI can't open files with anything using Dolphin as superuser. For example with Kate:
Code:
KDEinit cannot launch /usr/bin/kate
Also, I can't launch kwrite or kate as root per below:
Code:
john@vostro:~> su
Password:
vostro:/home/john # kate
kate(3007): Session bus not found
[Code]....
Since I've upgraded to KDE 4.5 on openSUSE 11.3. I am getting some instances of Dolphin hanging or lagging when navigating directories or opening files.
View 9 Replies View RelatedIn Dolphin i have build an ssh-Connection to my homeserver. Now when I edit an file, the save to the remote location occures only when the editor is closing.This is for webdevelopment etc. not practical.Which alternatives are possible?(under Windows i love WinSCP )
View 2 Replies View Relatedon my dell xps M1530 dualcore duo 2.2GHz 4GB ram 500GB harddisk suse 11.3 KDE 4.4 and KDE4.6beta1, when I copy big or a big number of files (20 or 30 files 500MB each) dolphin slow wildly down, especially when I copy from a smb:// to my disk, dolphin start immediately to copy but when I click on a tab or a folder (a one that I didn't opened before) dolphin shows it to me after a couple of minutes, is it possible to solve??
View 9 Replies View RelatedWhenever I go into the folders they're stored in and try to open them. They close so fast, in fact, that it's only after switching over to Konqueror that I found the files simply will not open. VLC/Kaffeine appears to load for a few seconds and then closes again without any indication of a bug or problem - it just doesn't work.
Been trying to sort this out for the last two days now, but I'm a complete simpleton with computers/linux and don't know anything about using the terminal, etc. (I can't even install stuff without using webpins) but now I'm stuck and searching around for people with similar problems really hasn't turned up anything that is familiar or understandable.
All of a sudden, Dolphin is identifying .xls files as "OLE2 compound document storage (application/x-ole-storage)." I searched for xls in Configure desktop, file associations and it still appears as application-vnd.ms-excel. It does not appear as x-ole-storage.
Other spreadsheets (ods, xlsx) are still identified correctly and open automatically in the proper program. This is a new behavior, and I'm assuming it has to do with something I updated in Yast. I'm using KDE 4.6.2 under 11.4.
As a workaround, I added the .xls extension to the file association for x-ole-storage, which allows Dolphin to open the file automatically, but it still asks me to install software to handle the file type. I answer no and then the file opens in Libre Office.
Before adding .xls to the file association, I tried to get this to happen automatically by going through the open with other application menu and checking always use this application. This had no effect.
Every time I try to empty the waste bin I get dolphin error - 'The file or folder /.local/share/Trash/files/IMGP1676.DNG does not exist'I tried to recreate the file 'IMGP1676.DNG' , deleted it i.e. sent i to the waste bin and then tried the empty waste bin again, although this time it was there and deleted it still reported the same error.du -h .local/share/Trash/files/ 12K .local/share/Trash/files
View 2 Replies View RelatedAs soon as i'm starting to copy a large file enough file (>700Mb) to my ubuntu box (connected to an Asus router via wifi) from a Windows 7 client (connected to router via ethernet cable) i get a dramatic drop in speed. upload starts at 1,0Mb/sec with a ping to ubuntu box at <1ms, and in 2 minutes it drops to 200kb/sec with a ping of over 1000ms! The ping increases with every second in a linear progression.
To exlude router as a possible problem copying to a windows 7 notebook connected to router via wifi results in an average of 2,7Mb/sec with an average ping of 150ms.
MB Model: Asus P5B Deluxe wifi
OS: Ubuntu Server 9.10 + desktop installed
Wifi configured via GUI
2. lsusb
3. wlan0
4. lsmod
I have Ubuntu 10.l0 installed on my laptop. I recently install the KDE desktop from the Software Center. Today, I noticed something strange. I tried to move a file to the trash when I got this error message: "The trash has reached its maximum size! Cleanup the trash manually." I don't have any files in the trash. I went back to Gnome, and was able to delete the file. I opened up Dolphin while still in Gnome, and couldn't delete anything, so I know that this isn't a KDE problem
View 5 Replies View RelatedI've been struggling to find an option to hide backup files some applications create when you save a file like "file.ext~", is there a way to tell dolphin not to show them?
View 2 Replies View RelatedJust wondering why Kubuntu 10.10 has a file manager that by default doesn't show the previews of video files? Or did I do something wrong during the install? Does extra software need to be installed to view video files as thumbnails in Dolphin? Or, am I doing something wrong and everyone else who uses Dolphin after installing Kubuntu gets thumbnail previews of their video files? See the attached picture showing a preview of a graphics file. Maybe I'm expecting too much because Nautilus (in Ubuntu), Thunar (in Xubuntu) and Windows Explorer (Win XP/Vista/7) all show thumbnail previews of video files by default.
View 2 Replies View RelatedWhen I am copying from DVD to my comp - Dolphin copies some files and directories and some did not. I have to check what was copied and what was ommited and fix the bad copying by copying again. The DVD is okay, it is perfectly readable. There is also plenty of memory around (8 GB). The behavior is new in Jessie, Dolphin in Wheezy used to work flawlessly.
I have met this strange behavior after copying archived data to my new Debian installation. The copyings were "huge tasks", for example 2000 files, more than 1GB total. "Small tasks" seem to copy okay. Nevertheless, the danger or missing files is annoying. What to do?
I loaded up OpenSuSE 11.4 on a HP DL360 G5 64 bit server. When the server boots up, I can connect via the wan or the local network segment. After some time, I will lose the WAN connection. If I ssh back into the computer from another computer the WAN connection can connect again for a period of time. The WAN connect is from the Internet. The firewall is off and so is AppArmor.
View 9 Replies View RelatedI'm using an Acer Aspire 3000 since Opensuse 9.3. Wireless connection was fine with ndiswrapper. I upgraded to 10.0 and wireless was perfect with the broadcom firmware. Now I just installed openSUSE 11.3 and my wireless connection became a nightmare: connection drops multiple times in a day and network manager remains stuck in "Interface Configuration". Sometimes I'm asked for the wpa password but Network Manager is unable to reconnect until I disable and re-enable my wlan card using the killswitch. The access point is the same zyxel b+g I own since 5 years! I just bought a new eeepc and I installed on it openSUSE 11.3 too. The network connection behaves the same!! The Network Manager says "Interface configuration" and I must switch the wireless off and on to have the network back. I made a radio scan and I'm using a channel on my own. I also tried to disable dhcp without success.
ACER
# uname -a
2.6.34.7-0.7-desktop #1 SMP PREEMPT 2010-12-13 11:13:53 +0100 i686 athlon i386 GNU/Linux
# lspci -vvvnn
00:0b.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
Subsystem: AMBIT Microsystem Corp. TravelMate 2410 [1468:0312]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 17
Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=8K]
Kernel driver in use: b43-pci-bridge .....
Everything worked fine for several updates to the final system, now suddenly when trying to login dropping out at runlevel 5 and login. When doing login the system starts as root with startx but not as user. This is for me a permission problem. Only: I did not change the permissions and I did not log into as a root-X system. I just did set the permissions in yast to secure. Nothing else. The system complains:
[Code]...
Toshiba A215 laptop
Driver is rtl8187
I really need to make the connection constant and non-dropping. I've had opensuse 11.2 since march 7 2010, figured out most of it by lurking and reading threads didn't want to make threads but I really don't know what to do to make this connection stay on. I am posting Terminal commands from when I am both on and offline.
How I attempted to fix this issue myself: I downloaded wireshark, wicd,knetworkmanager. Tried running all of them nothing worked. I went into Yast and switched off networkmanager and went traditional still nothing. Tried adding opendns to traditional. nothing. Went back to NM would get online then after an unknown time I'd lose connection even though NM said i was still connected. Offline running terminal commands from what I read on here in other threads and stickies
:~> ping -c 5 66.70.73.150
PING 66.70.73.150 (66.70.73.150) 56(84) bytes of data.
From 192.168.1.28 icmp_seq=2 Destination Host Unreachable
From 192.168.1.28 icmp_seq=3 Destination Host Unreachable
--- 66.70.73.150 ping statistics ---
5 packets transmitted, 0 received, +2 errors, 100% packet loss, time 4000ms
, pipe 2
:~> /usr/sbin/iwconfig wlan0 | grep Mb
Bit Rate=11 Mb/s Tx-Power=20 dBm
:~> sudo /usr/sbin/iwconfig wlan0 rate 24M
:~> /sbin/lspci -v
00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
Subsystem: Toshiba America Info Systems Device ff10
Flags: bus master, 66MHz, medium devsel, latency 64 .....
I just read the Linux scp command issue question and it reminded me that I regularily forget to specify the colon in the host part of a scp command, and thus copying a file locally instead of copying to a remote host, e.g. I do
scp foo host
instead of
scp foo host:
But I never use scp to copy a file locally. So I wonder if there is a way to make scp fail if both (the source and destination) arguments refer to local files.
I use software where I have to edit a text file in order to get my custom needs from it. Problem is that when the author puts out an update, it always overwrites my changes and I have to spend hours trying to compare the file, re-edit my changes back in, etc. This happens sometimes as often as once per month.
I've wondered if there might be a linux tool or commands which would look through the new file, then at my old file, changing only the text which already exists while not breaking anything else. Most software authors seem to know how to do this but since mine doesn't, how can I accomplish this on my own?
I recently upgraded a 11.0 installation running on Xen Server to 11.3. I am experiencing frequent network disconnections now. The ip address and default gateway is assigned statically. However, the system seems to ignore the default gateway after a while. Then after several minutes it seems like it comes back.
Code:
root@poe5e:~/ > route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.111.0 * 255.255.255.0 U 0 0 0 eth1
172.16.107.0 * 255.255.255.0 U 0 0 0 eth0
link-local * 255.255.0.0 U 0 0 0 eth0
loopback * 255.0.0.0 U 0 0 0 lo
default 172.16.107.254 0.0.0.0 UG 0 0 0 eth0
root@poe5e:~/ > ping 172.16.107.254
PING 172.16.107.254 (172.16.107.254) 56(84) bytes of data.
64 bytes from 172.16.107.254: icmp_seq=1 ttl=255 time=0.515 ms
64 bytes from 172.16.107.254: icmp_seq=2 ttl=255 time=0.484 ms
64 bytes from 172.16.107.254: icmp_seq=3 ttl=255 time=0.496 ms
64 bytes from 172.16.107.254: icmp_seq=4 ttl=255 time=0.473 ms
^C
--- 172.16.107.254 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 2997ms
rtt min/avg/max/mdev = 0.473/0.492/0.515/0.015 ms
root@poe5e:~/ > traceroute orl3akm1n
traceroute to orl3akm1n (10.111.19.19), 30 hops max, 40 byte packets using UDP
1 172.16.107.250 (172.16.107.250) 0.405 ms 0.398 ms 0.357 ms
2 * * *
When my sessions suddenly die and I have to coax it into routing correctly again.
I'm using OpenSUSE 11.4 and the GNOME 3 packages in the GNOME:STABLE repository. I maintain an application and have a remote Mercurial repo hosted at BitBucket, which requires SSH to do any push/pull operation.
My passphrase is just that -- a phrase, not a word -- and it's too long to type accurately without seeing it. I cut and paste it from a web page. When I'm asked by a console app for the passphrase, I can do that. The GNOME SSH passphrase dialog does not allow pasting or dropping, so I can either try to type it or hit cancel. Normally, ssh-add provided a way around this; it would ask you for the phrase on the console, and I could paste it.
This doesn't work in GNOME 3. ssh-add still asks me for the passphrase, but when I try any operation that requires the key, the dialog pops up again. How is it possible to get ssh-add to work, or (preferably) get rid of the dialog?
In summary, I am using openSUSE 11.2 x64 on an Acer laptop with a wireless AR928X card. I can connect to my WEP-secured network when I boot up. After some time (it might be minutes, it might be hours), I am prompted for my WEP password again. This never works, despite being the one which gets me on-line at start-up!. The only solution is a reboot. The problem is intermittent and doesn't seem to depend on my on-line activity. I have tried the following with the same result:
KNetworkManager
Traditional using IFUP
Enabling / disabling IPv6 support
I tried installing the compat-wireless package through YaST and then managed to get no internet connection at all. Went back to KNetworkManager and things "worked" again until I was prompted for the WEP code. I have openSUSE 11.2 x64 working on my office laptop without problem and can connect to my home network without any problem. My issues are with my personal laptop. I have reached the stage of booting into Windows 7 as my default option so that I can access the internet reliably. What I can do to diagnose and repair the problem - could it be that the card is going into powersave mode? If so, how do I stop that happening? I'd prefer to be on openSUSE but need to be able to rely on the internet.
what if the root user by mistakenly stops/starts any service and tried to remove those traces from the log files and save those log files. Then how can we ensure that our log file is trusted. Is there any way where even the root(superuser) also cant edit/modify the contents of the /var/log/* files.
View 2 Replies View RelatedI just noticed that even if I remove read and write permission for my files, another user can access those files if they use 'sudo'. The ls -l for the folder containing my file (let's call is myfile') looks like this.
"
Code:
-rw------- 1 username groupname 43 2010-03-09 20:23 myfile
"
I logged into another account I have made for myself (which had admin privileges) and then did
Code:
sudo nano /username/home/myfile
and ... the file was opened and I was able to read it. So what's the point of having user permissions if someone can bypass them by using sudo?
I'm running Apache2 and PHP5, hosting multiple virtual domains on my server. The directories of the domains (/var/www/<domain>) aren't publicly readable, so the websites can't access each others content as the scripts are run using different user accounts. They can, however, access other folders on the system that have public access for any user. I tried using the following PHP code, which listed the filesystem root:
Quote:
<?php
$handle=opendir("../../../..");
while($file=readdir($handle)){
echo $file . "<br/>";
}
?>
I will be hosting sites for other people so I don't want them to be able to access my entire server with PHP. Is there any way i can do this?
Code:- '-K': Allow users to resume and upload files, but *NOT* to delete or renamethemDirectories can be removed, but only if they are empty. However,overwriting existing files is still allowed (to support upload resume) . Ifyou want to disable this too, add -r (--autorename) .This is pretty much what I want to do, but I only want this done to ONE user on the server. I have many user accounts, but only one of them I want to prevent users from issuing the "delete" command and deleting everything.
View 2 Replies View RelatedThis is the set up
1. Server with ldap for authentication and autofs maps
2. Client machines have home directories on this server (nfs3) these machines also have some 'shared' directories on the same server (nfs4)
Now if I use a terminal I can always create files in the shared directories (subject to the relevant permissions) - I can also always save files in OO and the like. The problem is that Dophin sometimes has the create greyed out and sometimes it doesn't. So now I am at a loss as to why. This is 11.2 with kde 4.4.3 btw