Debian Multimedia :: Dolphin In Jessie - Forget Copying Files
May 10, 2015
When I am copying from DVD to my comp - Dolphin copies some files and directories and some did not. I have to check what was copied and what was ommited and fix the bad copying by copying again. The DVD is okay, it is perfectly readable. There is also plenty of memory around (8 GB). The behavior is new in Jessie, Dolphin in Wheezy used to work flawlessly.
I have met this strange behavior after copying archived data to my new Debian installation. The copyings were "huge tasks", for example 2000 files, more than 1GB total. "Small tasks" seem to copy okay. Nevertheless, the danger or missing files is annoying. What to do?
I've discovered that Dolphin seems to lose random files when copying many large folders.
I first noticed this a few months ago when I tried to copy my music library from one folder to another on the same HDD. It consisted of around 600 folders and 6500 files. During the copy there were no errors but after the copy I found that some of the newly copied folders were missing files. I put it down to human error or a glitch.
Yesterday I tried to copy 13 folders containing rips of some of my DVDs. Each folder basically had one film of either 700MB or 1.4GB. Again no errors showed up during the copy but I found 3 of the newly copied folders were empty.
It's not so critical with music or films but I can't afford to lose work data like this.
Has anyone experienced or seen a similar problem with Dolphin? I'm going to have to do some more extensive testing but this is not good.
The first time I noticed the problem I was running KDE4.3.4 (I think) and now the latest was with KDE4.4.0.
I just upgraded my Kubuntu from 10.10 to 11.04, and now Amarok do this with some audio files (some folders) Looks like is copying something, and that brings a dolphin window and interrumpts any mouse action you are working in that instant. This occurs every 3 - 6 seconds during the playback
It really **** me off
I cant understand the pattern for wich files is doing this.
When i try
amarok -debug everything seems fine.
When i see ksystemlog... I cant find what is happen,
Of course, this window appears for 1/2 second, so I cant click CANCEL or Pause buttons or try to read more info.
From jessie, mount a share folder in windows 7, in this way: mount -t cifs //windows7/sharefolder /mnt/windows7 -o user=pychi,password=mypass,uid=pychi,gid=pychi
And work fine, the user pychi and root, copy to windows share folder perfect and fast, but the big problem is:
when i copy a big folder, example 40 gb, after 30% or similar, stop the copy, and this is a list of different errors:
- It's not possible change file proprietary on destiny. - not enough space - can't fix attributes, date, time, proprietary, group.
When I copy files from one partition to another, or from one drive to another, the transfer rates hover around 5-8MB/sec which is kind of slow given that all my hard drives are SATA II. I have the same problem when copying either a single file or a group of files.
I'm running openSUSE 11.2 x64 here (KDE 4.3.5) with three SATA II hard drives that are all formatted with ext3. I have dropped to the CLI and used mv and cp instead - this seems to improve things but I shouldn't have to do this.
Whenever I go into the folders they're stored in and try to open them. They close so fast, in fact, that it's only after switching over to Konqueror that I found the files simply will not open. VLC/Kaffeine appears to load for a few seconds and then closes again without any indication of a bug or problem - it just doesn't work.
Been trying to sort this out for the last two days now, but I'm a complete simpleton with computers/linux and don't know anything about using the terminal, etc. (I can't even install stuff without using webpins) but now I'm stuck and searching around for people with similar problems really hasn't turned up anything that is familiar or understandable.
When I copy files over ( from a PC running Ubuntu 10.10 ) to my Sansa m260 each track is listed multiple times. When I look at the contents with my file explorer on my PC I see only one copy of each track.
I tried deleting all files and starting over again on a fresh battery.
I have recently installed Debian 6.0 Testing with KDE4.4.5. I have two fixed ext3 partitions on the hard drive but when I click on the second partition in Dolphin the following error message appears: "org.freedesktop.hal.device.volume.permission denied, refusing to mount /dev/hda5 for uid=1000". I have searched the kde forum and other sites and have found reference to it on other distributions. It appears to be a hal configuration problem. KMint kde 4.4 seems to have resolved the problem as my other partition is running the same kde version and I can access the debian partitions. Perhaps I should just manually mount the partitions when needed!
I'm running squeeze on i686, my last update was this morning (9/9/2010). Running the stock kernel 2.6.32-5-686
My PC keeps crashing when copying files. The monitor displays the desktop, but the mouse doesn't move, nothing responds and I can't even ssh in to debug it.
This happens when copying files using nautilus and the command line. I'm trying to copy files from my local hard disk to an nfs drive which is mounted in my system and has been working fine for years.
how to debug this after a hard reboot?
This has only just started happening, last night was the first time.
I've observed that if I copy a directory containing some files to an USB stick, files whose names are all upper-case are copied with all lowercase names. Is this expected behavior? The USB stick is shared with a Windows box.
Dolphin showing .iso file as text wants to open in Kate or Kwrite. I reported this bug to Debian so they can get it fixed [URL]...
If you haven't done this fix, download the three iso files to see this problem in Debian 8 32bit: dban-2.3.0_i586.iso shows as normal in Dolphin. [URL]....
Modify: /usr/share/mime/packages/freedesktop.org.xml My freedesktop.org.xml before: <sub-class-of type="application/x-raw-disk-image"/> <alias type="application/x-iso9660-image"/>
In kubuntu, I know of a package kffmpegthumbnailer for video thumbnailing support. For Gnome on Debian, ffmpegthumbnailer is in the repos. I cannot however find kffmpegthumbnailer for my KDE Squeeze in the repos. Where is it? Or, is there a good replacement?
I currently have a problem in running rsync on 64 bit Debian Jessie (although the problem also occurred with 64 bit Debian Wheezy)I am trying to use rsync to archive my home directory (which is on a hard disk) to a USB memory stick. The home directory is about 18GB in size and the memory stick has 32GB.
Unfortunately, rsync hangs after copying a certain number of files and the process eventually has to be killed. Rsync was rerun but hung again at about the same point as before.This has now happened several times. Each time the hang occurs at about the same point.Use of strace after the hang shows that rsync appears to be processing a pdf file at the time, although not always the same pdf file.I originally had the rsync hang problem on a PC which ran 64 bit Wheezy and which used a USB 2.0 port.
I now am running rsync on another PC, which runs 64 bit Jessie and which uses a USB 3.0 port..I have also tried three different USB sticks, two from one manufacturer and the third from another manufacturer.All give similar rsync hangs.
Yesterday pendrives started to misbehave when files are being copied/moved into them: after each major file (like a few hundred megabyte movie) the copying process freezes, stops and doesn't seem to proceed. After a long while (a few minutes), it unfreezes and proceeeds, only to get stuck again on another large file. Thus copying 5 movie files takes half an hour instead of just a few minutes.
The freeze occurs regardless of copying method used: mc (F5), Dolphin, command line cp or mv. During the freeze the process refuses to react to any signals, for example 'killall cp' or 'killall mc' doesn't kill the process, only 'killall -9 mc/cp' works, and also only after a short delay.
This misbehaviour continues across reboots.
What may be the cause of this? Where should I look for the source of the problem or for solution?
This has never occurred before - since I'm on llinux, copying to external devices has always been going smooth and fast. On current Debian this used to be like that as well since install untill yesterday. I don't recall doing anything special to the system yesterday or right before yesterday (I switched from Ubuntu to Debian (squeeze, AMD 64) a week ago).
I'm about to move a lot of folders from an older computer (sarge/etch) over to a newer with Lenny. But I get problems when I reach folders or files with names that contains nordic letters like øå. I'm using an external drive to move the folders. What is the easiest and best way to do this.
I recently upgraded from wheezy to jessie and everything went as planned with dist-upgrade. However I just noticed that I can't play any video file. I thought about upgrading vlc, as it was already installed but it had dependency problems. So I tried to remove it
Code: Select allsudo apt-get remove --purge vlc
Then If I try to install vlc I receive this message:
Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.
The following information may resolve the situation:
The following packages have unmet dependencies:
vlc : Depends: vlc-nox (= 2.2.0~rc2-2) but 2.0.3-5+deb7u2+b1 is to be installed Depends: libvlccore8 (>= 2.2.0~pre1) but it is not going to be installed Recommends: vlc-plugin-notify (= 2.2.0~rc2-2) but it is not going to be installed Recommends: vlc-plugin-samba (= 2.2.0~rc2-2) but it is not going to be installed Breaks: vlc-nox (< 2.2.0~pre2-2~) but 2.0.3-5+deb7u2+b1 is to be installed E: Unable to correct problems, you have held broken packages.
Now, I thought about removing vlc-data but I received this message saying that 253 packages will be removed (624Mb worth of applications). Am I uninstalling my entire system with this?
This is my sources.list
deb http://ftp.us.debian.org/debian stable main contrib non-free deb-src http://ftp.us.debian.org/debian stable main contrib non-free deb http://ftp.debian.org/debian/ jessie-updates main contrib non-free deb-src http://ftp.debian.org/debian/ jessie-updates main contrib non-free deb http://security.debian.org/ jessie/updates main contrib non-free deb-src http://security.debian.org/ jessie/updates main contrib non-free
- Debian boots normally - I get the login screen - Once my credentials entered, I see only the grey foreground of the login screen for a couple of seconds, then a black screen with a prompt for like half a second and then I'm back to the login screen. No error message, nothing.
When booting in recovery mode and use startx, it works fine (it's my setup at the moment). From there, if I start gdm3 (systemctl start gdm.service), I get the black screen with a prompt and I can do nothing, I have to shut down directly by pressing the button.I tried to add Debian-gdm user to the video group (even if I don't use nVidia drivers), to replace gdm by lightdm and even to remove any display manager but the issue is not solved.Here are some outputs:
Code: Select all# dpkg-reconfigure gdm3 Job for gdm.service failed. See 'systemctl status gdm.service' and 'journalctl -xn' for details. invoke-rc.d: initscript gdm3, action "reload" failed Code: Select all# journalctl -xn -- Logs begin at Tue 2015-12-29 19:16:26 CET, end at Tue 2015-12-29 20:20:55 CET
[code]....
Since removing gdm didn't change anything, I assume it doesn't have anything to do with it but still.
I'm trying out a Jessie install and have noticed VNC doesn't work as well as it used to. I often install a desktop environment on a headless machine, disable *dm, and use vnc4server to create a desktop session if I want to use a GUI. When I try to do the same on Jessie, I run into problems.
Using Gnome, all I get is the generic "Oops something went wrong" error. Looking at .xsession-errors, there are some errors that hint at the problem.
Code: Select allXsession: X session started for ryan at Mon Dec 29 06:07:30 CST 2014 X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 109 (X_ChangeHosts) Value in failed request: 0x5 Serial number of failed request: 6 Current serial number in output stream: 8
[Code] ....
Some possibly related bugs: [URL] ...
The same thing seems to happen with Cinnamon. Since I doubt a fix for the above issue will make it into Jessie, I tried XFCE. However, that doesn't work correctly either. When running XFCE via VNC something is misreporting the version of xrandr as 1.1 instead of 1.4. Since xfsettingsd appears to want version 1.2+, many things are broken.
This post on the Ubuntu forums suggests the issue might be fixed in xfsettingsd version 4.11: [URL] .....
Is there a better way of getting a remote desktop in Jessie that I'm overlooking?
I am using Jessie. 64 bits. I have been using Sound Converter in other distros (LMDE, Ubuntu, etc) in the past.Jessie has Sound Converter 2.1.3. I think I have installed the needed codecs. When I try to convert from mp4 to mp3, the program gets stuck, and nothing happens. Other formats can be converted.
When I use SoundKonverter (also in Jessie, version 2.1.1) it works with no problem, converting from mp4 to mp3. Nevertheless I would prefer to use Sound Converter.
A few weeks ago I have installed Debian Jessie on KDE Desktop Version. I have a problem with the Display Manager Kdm, if i log out session the monitor turns off (DVI No Signal), the only option that I have it's forced shutdown or reboot via power button. I try another DM lightdm and this works fine. But i liked to know why log out session crash on Kdm.
Adding : TerminateServer=true at the end of /etc/kde4/kdm/kdmrc (Section :[X-:*-Core], solve the issue.
I'm trying to install KDEConnect on my 64 bit Debian system. It's failing because of dependencies.
Tried installing the first dependency, sshfs. It said it cannot find the 64 bit package. So, I tried the 32 bit. That one depends on fuse. Tried to install fuse 32 bit. hat depends on sed. Tried installing 32 bit sed, but the package manager said it's risky to replace 64 bit sed with the 32 bit variant.
I stopped here thinking that I'm risking some stability and the road to the finish line is not visible till the end, meaning I might lose hours trying to do something that fails at the last step. This happened to me few times in the past (with other software) and I really don't want to repeat the incident. I need a stable system and I need my time.
The question is: how to get installed kdeconnect package on Jessie 64 bit ...
X won't start (awesome WM) after upgrading to jessie. It seems to startup up, then just stops. I'm running startx from the command line after logging in. The xorg log (bottom) looks good and I see an exit code of zero.
I do see this in sysout:
Code: Select alldebian xf86TokenToOptinfo: table is NULL
Googled around but I can't find anything specific on this one.
I'm not using any xorg.conf, as booting into a linux rescue cd everything works ok
Code: Select all[ 2275.960] X.Org X Server 1.16.4 Release Date: 2014-12-20 [ 2275.960] X Protocol Version 11, Revision 0 [ 2275.960] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian [ 2275.960] Current Operating System: Linux jj 3.14.25 #1 SMP Fri Dec 5 10:17:33 EST 2014 x86_64
I'd like to have acestreamplaer installed in jessie, but I am not able to do it....
I tried with Acestream repos: deb http://repo.acestream.org/ubuntu/ saucy main
But I cant install it, I got this
acestream-player-data : Depende: libavcodec53 (>= 4:0.7-1) pero no es instalable o libavcodec-extra-53 (>= 4:0.7-1) pero no es instalable Depende: libavformat53 (>= 4:0.7-1) pero no es instalable o libavformat-extra-53 (>= 4:0.7-1) Depende: libavutil51 (>= 4:0.7-1) pero no es instalable o libavutil-extra-51 (>= 4:0.7-1) Depende: libdvbpsi7 (>= 0.2.0) pero no es instalable Depende: libupnp4 pero no es instalable o libupnp3 pero no es instalable Depende: libx264-120 pero no es instalable
I am running Debian jessie 64-bit with GNOME 3.14.1. I would like to install the CODE::BLOCKS IDE, described here: [URL] ..... I follow the tutorial for Debian, but having added
Code: Select alldeb [arch=amd64,i386] https://apt.jenslody.de/stable jessie main deb-src https://apt.jenslody.de/stable jessie main
to Code: Select all/etc/apt/sources.list, I then run "sudo apt-get update". This gives me the error
Code: Select allE: The method driver /usr/lib/apt/methods/https could not be found. N: Is the package apt-transport-https installed?
Is it safe to go ahead and install apt-transport-https? I really don't want to ruin my Debian-installation...
