OpenSUSE Install :: USB Doesn't Work At All Once
Mar 30, 2010
As stated, NO USB functions, not at all, the light on the mouse is on, but it does not move on screen, the PS2 keyboard does not function either. Nothing that would allow you to install it, works at all. I am absolutely shocked not one single person on here has mentioned this.
The last time I tried OpenSuse was version 10, it installed without issue, I noted the installer as the nicest one in the Linux world I had seen to date, only to be utterly let down by this USB fumble.I have Legacy USB support, Legacy Keyboard and Legacy Mouse USB support on, that isn't the issue, and this didn't happen with 10 on the same system.
View 7 Replies
ADVERTISEMENT
Jun 10, 2010
I successfully installed OpenSUSE on a 4gb pen drive using the instructions contained within this portal. However, for the life of me I can't figure out why the persistent feature doesn't work.
Here's my partition table map:
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code]...
View 1 Replies
View Related
Feb 16, 2010
I've got a multiboot system with Windozin the first drive and first partition like everyone recommends. I have several distro's and just let them install their bootloaders, but always on hd0 mbr. I installed Debian 5.0.1 this way and it wouldn't boot, so I got SGD to "fix" it, which it said was successful, but all I get is a partition doesn't exist when I try to boot. I put Debian on /dev/sdb3, I loaded Linux Rescueand mounted sdb3 and verified that its menu.lst had the right boot numbers (hd1,2). fdisk even showns /dev/sdb3 as boot as shown by the asterisk under the boot column. Should I do a complete reinstall of grub, maybe using one of the other distro's as the holder of grub? At one time they did all the grub launching as each addition was made
View 9 Replies
View Related
Aug 23, 2010
I would like to have the opensuse 10.3 DVD for installing gcc. (I lost the original DVD and with opensuse 11 my laptop does not work) Do you know a webpage where I can download it? The official page doesn't work.
View 6 Replies
View Related
May 19, 2010
I've patched my kernel to enable my IDE-mode SATA drivers (ata_piix.c), and everything works fine. But when I attempt to create a Driver Update Disk with this structure, it doesn't work (though the same format works for SLES11):
[Code]....
View 1 Replies
View Related
Apr 21, 2011
I've been trying to figure out how to run/install openSUSE from a usb stick for several days. I downloaded the 11.4 .iso from distrowatch & used the following command in Linux Mint to put it on the usb stick.
Code:
sudo dd if=openSUSE-11.4-KDE-LiveCD-x86_64.iso of=/dev/sdc
It gets to the loading screen and get stuck. It has a small bar going across, that never finishes. I've hit escape to try and get some info, but don't know what I'm looking for and it's too much to write down. I did notice there were several I/O errors. I did check the usb for defects and it returned ok, and the md5sum was correct.
I've also tried safe settings which takes me to a blueish/black screen and stays there. No ACPI starts to load and then drops to a shell.
how to get this accomplished? I've installed many Linux OS's and I've never had this much trouble.
ps. I"ve read the "please read" pre installation page on here, and things just don't make a whole lot of sense to me.
View 2 Replies
View Related
Jun 6, 2010
I have one problem with taking screenshots during SUSE installation. I am using 10.2 version. Button PrtSc does not work and Terminal is not available during installation (at least I think it isnt)Do you have any idea how to do it?
View 4 Replies
View Related
Sep 20, 2010
My dual boot Windows 7 and Opensuse 11.3 doesnt work anymore, i have to keep repairing the OS i want to use, i fix one and that breaks the other, how can i fix this so both work
View 7 Replies
View Related
Apr 20, 2011
The installation went smoothly however, I have installed SuSE11.4 on my 2nd Hard Drive. Now Grub doesn't work and I want to know where and how to install it.
View 9 Replies
View Related
Sep 1, 2011
i have noticed that if vista is not the active partition, hybernate does not work. it just goes black and then back to the user icon screen to log back in. another "slight" problem was that i was not able to apply a service pack. after restoring vistas dominance i was able to install the pack. is there any other work arounds for hybernate? even though you might not be interested in cleaning up after microsoft.
View 1 Replies
View Related
Dec 21, 2008
I'm using openSUSE 11. I'hv tried to upgrade it to 11.1 with a x86_64 installation DVD (as I did earlier), but it failed. It showed the following message:
[Code]...
eventually same type of problem happend when I was trying with fedora 10... fedora 9 and openSUSE 11 install smoothly in my 64 bit machine (compaq SR1730IL, Intel pentium 4, 524 and 1GB DDR2 RAM)
View 5 Replies
View Related
May 6, 2010
I upgraded to OpenSuse 11.2 and just about the only thing that doesn't work is my wireless internet. From my research, I should be using the iwl4965 or iwlwifi driver; however my system seems to be running iwlagn. I have no idea how to switch it as neither of the correct drivers can be found in my yast, and I've failed to find any information about this on the IntelŪ Wireless WiFi Link drivers for Linux* website.
View 9 Replies
View Related
Aug 25, 2010
using suse 11.3 and kde 4.5 I installed kvm, I tried to install widows xp, everything works well until when the windows cd restart, there kvm shows en error like no disk to boot and don't reboot to continue the installation.
View 1 Replies
View Related
Dec 15, 2010
Skype does not work in Suse 11.3. When i start in an terminal, i'm getting this error:
skype: error while loading shared libraries: libQtGui.so.4: cannot open shared object file: No such file or directory
I looked for that library but didn't find it in the repositories.
PS. Running Smeegol on Samsung N150
View 9 Replies
View Related
Jan 4, 2010
I installed from scratch 11.2, but i see now that the Automatic update doesn't work. I run "Refresh" on Updater Applet and it come up with an error: PackageKit Error repo-not-available:
View 9 Replies
View Related
Jan 28, 2010
I have a problem whit this plasmoid.If I add this plasmoid while amarok runs, It works correctly.But if I close Amarok e then I run it again, plasmoid doesn't work.
View 2 Replies
View Related
Feb 10, 2010
I've created the GParted LiveUSB from what I found on the Ubuntu forum. Apparently the instructions given on GParted website doesn't work.
I essentially copied the necessary gparted files to my USB and then made it bootable using syslinux.
I've set the boot sequence properly to boot from my USB but it still doesn't do anything and just brings up the screen where I select my OSs (I have a dual-boot system with WinXP).
I don't have access to a CD-drive so will have to use the USB. Is there a different way to make the LiveUSB?
View 1 Replies
View Related
May 30, 2010
i tried gnome shell from the software center, but it has some graphics issues. Is it my graphics driver?
View 6 Replies
View Related
Oct 26, 2010
So, I jaibroke my iPod touch and have OpenSSH and I can ssh into my iPod, but I cannot ssh back into my Laptop??
I did
Code:
$ echo '192.168.*.*' >> /etc/hosts.allow ##I googled and it said to do this
$ echo 'sshd: 192.168.*.*' >> /etc/hosts.allow
I also uncommented these lines in /etc/ssh/sshd_config:
[Code]....
I am 100% sure I am putting in the right password. I even did that ^ code from my laptop, the one I am ssh'ing into, but it still will not accept my password. I even tried root@ instead of matt@..
View 9 Replies
View Related
Oct 30, 2010
When I clicked the shutdown button through the menu, the computer seem to do not respond. And the command line works well.
View 9 Replies
View Related
Mar 15, 2011
It looks like the ocfs2console is broken on openSuse 11.4 64bit. I tested on several servers and my laptop. It works under 11.3 x86_64 but that uses Python 2.6. OpenSuse 11.4 uses Python 2.7.
I tried to submit a bug but I can't seem to get my email address verified so I can use the bug tracker.
Server1:~/python-gtk/pygtk-2.12.1 # ocfs2console
ERROR: Unable to initialize the windowing
system: The CObject type is marked Pending Deprecation in Python 2.7. Please use capsule objects instead.
Server1:~/python-gtk/pygtk-2.12.1 # uname -a
Linux Server1 2.6.37.1-1.2-xen #1 SMP 2011-02-21 10:34:10 +0100 x86_64 x86_64 x86_64 GNU/Linux
Server1:~/python-gtk/pygtk-2.12.1 # python
Python 2.7 (r27:82500, Aug 07 2010, 16:54:59) [GCC] on linux2
View 2 Replies
View Related
May 23, 2011
have You noticed that mt command doesnīt work anymore on 11.4? We try to install new version to hadle robotic library, but someone has written mt command as a new, and it doesnīt accept mt -f command anymore. cpio based mt command itīs not reliable as old one. Can anyone tell where to get old mt command which is compatrible new 11.4 x64 bit version?
View 9 Replies
View Related
Oct 10, 2009
My CD drive is attached as secondary slave but it doesn't appear anywhere, eg. no /dev/hdd or /dev/cdrom. It is not listet in hwinfo either. I completely re-installed SuSE from network today, so it's the newest version. The drive always worked fine in SuSE 9.x and also booting the Network Setup CD worked properly.
May there be missing packages? What do I have to check next?
View 9 Replies
View Related
Apr 22, 2010
i have a regular ole USB mouse and got a USB hub to expand the number of ports i have. I connected my USB mouse to the hub which worked in Windows but when i booted up linux the mouse did not work. If i plug the mouse in directly then it works again but i would like to figure out how to make the mouse work using a hub but am not quite sure where to start,
View 6 Replies
View Related
Jun 21, 2011
I have a webcam in my monitor (Acer H243HX). It is seen by the system (11.4):
Code:
> kernel - - - [302942.719649] usb 2-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[code]...
View 9 Replies
View Related
Mar 17, 2010
Windows crapped out on me (not surprisingly) and I am using Ubuntu to transfer all of my files to an external hard drive. However, when the computer loads the Ubuntu disk I get to a language selection menu, but my keyboard doesn't work. It won't let me make any sort of selection, and the 30 second timer eventually times out and my system just restarts and the process starts all over again.
I've tried plugging my keyboard in to all of the different USB ports on my computer, but still nothing. The strange thing is that the keyboard works just fine when I changed the BIOS settings to boot from the cd-rom... it just doesn't work when Ubuntu is ready to run..
View 3 Replies
View Related
Apr 1, 2011
I have a 904HA that I am taking to Argentina for my mother to use and video chat with me. It occurred to me though that since I am a total linux newbie, it would be hell for me to setup a PPPOE account as they limit their DSL usage. Last time I was there they used proprietary windows only software. So having said that,need to restore my EEEPC to windows.Unfortunately in the process of installing linux I broke the restore?I didn't delete the restore partition but now when I hit f9 or f10 etc, it doesn't bring up the restore partition.I remember I had a similar problem before and I solved it but I don't remember how.
View 7 Replies
View Related
Feb 18, 2010
Trying out opensuse with gnome.. why ATI drivers works on kde, and doesn't work on Gnome? Fells like theres no installed drivers at all :/
[URL]
View 3 Replies
View Related
Mar 14, 2010
It seems that there is no way for me to install java plugin in firefox 3.6. I've already read some threads about similar problems but none of the solutions that worked for other people work for me. So I decided to open a new thread. Following instructions of other threads, I uninstalled all java packages and installed again just the three that you can see below, but nothing changed.
Opensuse 11.1
KDE 4.4.1
Firefox 3.6
Code:
# rpm --query --all '*java*'
java-1_6_0-sun-1.6.0.u7-20.4
java-1_6_0-sun-plugin-1.6.0.u7-20.4
timezone-java-2008h-2.16
View 9 Replies
View Related
Apr 2, 2010
The main thing preventing me from going Linux although I have it installed in a multi-boot is the probelm I have with Reconnecting the Network (eth0)
If I reboot everything is fine and I am automatically connected to internet via my Ethernet_NAT_router/Homeplug_PowerLine/Cable_Router (using DHCP)
But if I manually disconnect the Network using the tray icon, or through the terminal, when I reconnect the Network Manager says I am reconnected but actually I am not connected to the internet. I can load my Cable Routers configuration page but pages beyond that in the outside world are accessible no longer...
To regain access I have to reboot.
The reason this is important for me is that I reckon if I could get this sorted then if I put the laptop to sleep it will will wake up and reconnect.
As it is using Linux sleep function is unworkable unless I don't mind losing internet.
I am determined to get this sorted eventually as I feel sure there must be a solution. My laptop isn't new but is a good workhorse.
Dell Inspiron 4100 / OpenSUSE Linux 11.2 Gnome
View 9 Replies
View Related
