OpenSUSE :: 11.4 'freezes' Every 10 Seconds Or So
Mar 15, 2011
I just installed OpenSUSE 11.4 - fresh install (no upgrade). However with 11.4 there is a very annoying bug (actually, two of them, but I'll post the other one to a different thread): every few seconds (10 or 15) the system 'freezes' for a split second. anything that is going on (visible) freezes for half a second or so. If you're in the process of moving the mouse, the pointer will stop dead in its tracks for that half second, and then when it resumes (a half-second later) it picks up from where "it would have been" had there not been a freeze (it will jump from one position on the screen to the next, as per the actual movement of the mouse. If I have a window (a terminal window for example) that is scrolling output, the scrolling will stop for the same half-second. I did a quick monitor with 'top' refreshing every tenth of a second, and when this freezing occurs is *seems* to coincide with spikes in the kernel thread 'kworker'. I have a hunch that this *may* be due to new built-in NVIDIA drivers that are in 11.4 that I wasn't using in 11.2 (where I compiled the driver from scratch) as I have seen a few posts about issues with this and the 'nouveau' driver - this is just a hunch. Not that dmesg also reports this log quite frequently:
[code]...
This is a FAST system (3 GHz and four cores) that is otherwise running IDLE, other than logging into KDE. So it's not a case of high CPU usage or I/O usage. The video card is: VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2). I have installed a basic KDE 64-bit distribution, using NO proprietary repositories - it's essentially and "out-of-the-box" install.
View 9 Replies
ADVERTISEMENT
Jun 27, 2010
I decided to install ubuntu again and downloaded 10.04. I had some issues installing with the desktop version, but everything installed fine with the alternate version.Now if I want to log in (on the KDE login-screen) the KDE-loading-symbols show up just as they are supposed to do, the desktop shows up (I can see "Desktop Folder and uBlog) and suddenly the mouse/system freezes. Neither Ctrl-Alt-Del isn't working nor Ctrl-Alt-F2 gives any response, all I can do is to reset my computer.
When I use Gnome as a desktop enviroment the computer totally freezes at the login-screen, without giving me any chance of logging in. Things I already tried: noapic, nomodeset, noacpi settings when booting, I successfully installed the latest ATI-Driver for my 3870, I disabled compiz.The kdm log says that there's some problem with an i-bus-daemon. Disabling/restarting the daemon has no effect on the behavior of my installation.
View 2 Replies
View Related
Mar 15, 2011
I recently installed Ubuntu on my spare comp.
It freezes after about 10 seconds after logging in. I don't know why this happens.
It's a Dell Dimensions 4100. Installation went fine. I did everything, didn't skip any checks. It finished normally.
And now my hopes of another working computer have gone down the drains.
View 9 Replies
View Related
Jul 11, 2009
The system runs just fine then all of a sudden it "freezes". For example an input box doesn't respond nor can I scroll down the page. But when the system comes out of the freeze 5-15 seconds later, it suddenly does all the input that was used during the freeze. The scroll and letters suddenly show up. I don't loose mouse control and I can do some other system functions but not all of them.
Here are some various system info's
[osprey@host ~]$ uname -a
Linux host.tranquilpenguin.com 2.6.27.25-170.2.72.fc10.i686 #1 SMP Sun Jun 21 19:03:24 EDT 2009 i686 athlon i386 GNU/Linux
[osprey@host ~]$ firefox -v
Mozilla Firefox 3.0.11, Copyright (c) 1998 - 2009 mozilla.org
[osprey@host ~]$ df .....
View 6 Replies
View Related
Sep 7, 2011
Every time I launch Firefox and go visiting some websites, I notice it freezes for about 10 seconds. Not always in the same websites, but it always happens sometime in the first 2 or 3 minutes of running. I can see the hard disk led is ON all the time the browser is hung.
My operating system is Linux and I don't currently have any extension/plugin installed here.
I have no form completion, no history and have no more than 20-30 bookmarks.
Has somebody noticed something similar, or know how can I debug this to find out what Firefox is doing or trying to do?
View 1 Replies
View Related
Jan 22, 2010
I have managed to install Ubuntu 9.10 on my pc I have Vista installed on one hard drive and ubuntu on another. When I boot up on Ubuntu, the desktop comes up, then after about 30 seconds the pc freezes.
View 2 Replies
View Related
Mar 28, 2015
I have a very fresh and basic install of the weekly jessie build (this week). I've installed nvidia drivers, some non-free plugins, virtualbox, basic system tools, etc. The issue is while playing in audacious, the song will freeze for about 5 seconds. It's always around 5 seconds. Sometimes it's once or twice per song, sometimes I'll play 10 songs without it happening. BTW, all music is on a separate hard drive on an NTFS partition.
In audacious, I'm using the Winamp skin. I noticed when trying to play for the first time, it wouldn't play unless I changed the setting in audacious to use ALSA. That was the only way I could go to Settings and select my SPDIF digital output. But then doing that, other sounds no longer worked (in iceweasel). So I downloaded pavu, was able to select my onboard digital stereo output, set audacious back to pulse audio, and everything now works. Only issue is audacious is freezing every now and then... Is there a driver or module that I need to check for? Is there a way to get everything to use ALSA?
I once tried AV Linux for the low latency kernel but since it was based on Wheezy and I wasn't familiar with repos, everything was extremely outdated, so I migrated away. Should I need an LL kernel for 320kbps audio playback? I haven't sat and watched a full mkv yet, some of those have 1.5mpbs audio.
View 10 Replies
View Related
Dec 10, 2010
I have this problem on my workstation. The computer would effectively freeze for 2-5 seconds for no apparent reason, then continue as normal. While frozen the mouse would still be movable, but only on one of screens in my multi-screen setup. What can be the likely cause.
System:
CPU: i7-920
Memory: 12G of Patriot DDR3, 6 modules
OS: SLED 11, Suse Linux Enterprise Desktop, using Gnome
Main board: Asus P6T
Video: two Nvidia 9500GT connected to three displays
I am using memory at recommended settings of 8-8-8-1333. It has an XMP profile. Th CPU is a bit overclocked to 3.3 GHz, but my cooling more than allows for it. I ran the computer with all overclocks off and lower memory speed but the issue was still there.
View 1 Replies
View Related
Jan 6, 2010
My problem is this: the video that I receive during a video call will freeze after about 30 to 60 seconds. Before that, it works fine. And the outgoing video (that which I send to the contact on the other end of the call) is fine throughout.
If my contact resets their video by turning it off and then on again during the call, it will usually work again for a few seconds. Then, as always, it freezes.
So, I am clearly receiving the signal. But maybe I am overloading something? Is this a graphics card problem?
SPECS:
* Mobile Intel 915GM Express card
* IBM Lenovo X41 laptop
* Intel Centrino processor
* Ubuntu 9.10 (Karmic)
* Skype 2.1.0.47(Beta)
View 1 Replies
View Related
Feb 17, 2010
Problem: Ubuntu freezes up 30 seconds or so after a successful login.
Background:I am running a Compaq Presario SR5030NX. It has had issues for a while with running Ubuntu properly. My computer suffers from this bug. I have managed to get the LiveCD running by adding the following to my boot parameters:
Code:
vga=792 i915.modeset=0
When I was running the LiveCD I found that it would freeze after about 30 seconds. I solved this problem by again changing the boot options. This time I:Press F6
Check noapic, nolapic, and pci=noacpi
I then proceeded to install Ubuntu.
My problem arose when Ubuntu did not modify grub.cfg to match the setting I needed in order to boot. I managed to modify in some of the settings correctly, I believe at least, but not all of them.
In its current state Ubuntu is able to boot, but freezes 30 seconds or so after a successful login. If I do not graphically login, I do still have access to VTY1-6. The machine does not freeze until a successful graphical login has been made.
Below is the relevant section of my grub.cfg:
Code:
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,2)
code....
On another note:
The liveCD I have been running for 6 months is BackTrack 3 Final. Which does not have this issue at all. I would wager a guess that BackTrack 4 does though as it is based off Ubuntu instead of Slax.
View 2 Replies
View Related
Feb 9, 2011
I am installing Ubuntu for the first time as a result of my Programming teacher starting me on a webserver project that will not work on windows. I dug up an older Dell, about 5 years old, and I keep getting install errors Just under halfway through. The OS will completely freeze for a few minutes then say 'errno 5'.
View 7 Replies
View Related
Sep 26, 2015
So i just finally installed Debian Jessie OS, replacing Ubuntu. But now it is running extremely slow. It's not internet connection. The internet speed is running fine (Videos load quickly), but it's like the system freezes every 30 seconds or so. A video can be fully loaded but still stops and starts constantly. Just browsing the internet, or non-internet things do the same also. I switched back to Ubuntu to see if it was different on there, but Ubuntu is running fine.
View 4 Replies
View Related
Apr 28, 2010
I've been using Thunderbird 3.0.x for some time and found in it a good replacement of TheBat. However, few days ago, ubuntu being ubuntu crashed and since then, Thunderbird freezes after 10 seconds every time I try to start it, sending CPU usage through the roof. I have 8 imap accounts in it and my profile folder is ~2.8gb I tried purging the installation. I tried fsck on all partitions. Windows Thunderbird using the same profile folder works just fine.
View 6 Replies
View Related
Jun 24, 2010
I am having a problem with my Fedora11, I am not sure wether it is software or hardware but this looks serious. My computer is running very slow and freezes up every few seconds. Every time I reboot I would get a kernel failure pop-up.
This is what the message says:
Kernel failure message 1:
Kernel failure message 2:
Call Trace:
View 1 Replies
View Related
Mar 11, 2010
I have an Acer Aspire One Netbook, and I have the Ubuntu 9.10 Netbook Remix installed. I have tried using Cheese to capture video and it captures maybe 2 seconds of movement, then goes black and/or the image freezes. I can take photos just fine, but video capture seems to be impossible. Any help?
View 2 Replies
View Related
Feb 11, 2010
I am stumped. I get random "freezes" for like 20 seconds, then back to normal. Then again the same thing randomly. I thought it was my hard drive...replaced it, reinstalled 9.10 and same issue. Thought it might be the memory...nope!, thought it might be my motherboard, tried to update my bios and it froze and now I can't get in to my bios at all. I bought a new motherboard and did a fresh install of 9.10 and same problem!!! I took my hard drive out and put it in another computer and it ran the same ruling out hardware issues all together.
View 7 Replies
View Related
Dec 10, 2010
I have Dell Vostro laptop with Core2 processor 1.8 GHz, 2 GB RAM. I want to install Fedora. I tried to install it with Fedora_14_ 32 bit and Fedora_14_ 64 bit. After booting by DVD or USB, I get initial blue screen in which I select Install and it starts for few seconds and freezes there, it does not move ahead. I got Fedora 32 bit DVD from Fedora so it should have come with checksum checked. So IMO DVD is ok, it is something else with regard to hardware detection, stopping installation to go ahead. I tried 3 times, but do not go ahead.
View 4 Replies
View Related
Oct 18, 2010
I have something that is poling my hard drive about every two seconds. It's really not necessary I don't think. I am not sure how to find out what process it is. My memory usage is pretty low and I am not using any swap.How do I go about tracking the culprit down?
View 9 Replies
View Related
May 17, 2011
Running openSUSE11.4 KDE I have this problem:
starting vlc gives only 3 seconds sounds, then quits. Message from system: linuxbox kernel: [ 786.386363] ALSA clock.c:233: current rate 0 is different from the runtime rate 44100 All other players like Smplayer
View 4 Replies
View Related
Mar 6, 2010
Movie and translation are 32 seconds out of sync. There are 2 ways to resolve:
1. edit all zillion lines of translation (daunting, I couldnt find tool)
2. add 32 seconds of nothing or whatever to the beginning of a video file
No2 may be quicker, but I do not know how.. I am not good with ffmpeg... also, if I want to join some 32 seconds, lets say of my XVid recording, I need to prepare it to be the same as film, so it is also complicated. how to add 32 sec? I tried openShot (couldnt find option). Cinellera is giving me strange errors, about audio codec and something I dont understand... I am confused in using both tools
View 7 Replies
View Related
Mar 19, 2010
Sometimes when I type something to run apps on krunner (alt + f2) it gets freeze for about 10 seconds. I say sometimes but sure it happens most of times I use krunner. Other times I write it on but then the app doesn't come up until about 10 seconds...Does someone else have this issue on krunner? KDE 4.4.1, openSUSE 11.2.
View 9 Replies
View Related
Nov 23, 2010
I had a problem where my system momentarily hanged for a few seconds. Sometimes when opened a window like Dolphin or when I made a window full screen, sometimes when clicking on the screen while watching a DVD or sometimes when I clicked on a button it just froze for a few seconds and responded.
I have fixed the problem by disabling "Processor Power Managament" in the Bios.
this happenend on my desktop computer. See specs in my signature
View 2 Replies
View Related
Feb 23, 2011
We have a weird problem with two PC's running SUSE 11.3. The built in PC speaker beeps every 2 seconds when you are typing.
One of the PC's (an old celeron with intel graphics, 32 bit suse 11.3) has had this problem for at least a year but we don't use the keyboard much. The other one is a Core i5 with nvidia graphics (suse 11.3 64 bit). This machine was fine until it was upgraded from suse 11.2 (with zypper dup).
It is like a torture and is driving us nuts. It only does this in X11 - text mode is fine. It's probably something obvious but we are stumped.
View 9 Replies
View Related
Feb 28, 2011
Firefox, pidgin, thunderbird, intelliJ, even emacs!!!, or perhaps it's gnome in general will periodically stop responding. All named except emacs tend to gray out while this freeze is happening.
opensuse 11.2
2.6.31.14-0.6-desktop #1 SMP PREEMPT 2010-12-10 11:18:32 +0100 x86_64 x86_64 x86_64 GNU/Linux
cpu: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
nothing obvious in the logs
View 6 Replies
View Related
Jun 25, 2010
I recently downloaded openSUSE (gnome) from the main site. I used ImgBurner to put it on a cd and boot it. After I double click the installation on the desktop, it opens then closes after like 30 seconds. I dont know if the ImgBurner did not burn it on the disk properly, or if my computer is just retarded.
View 9 Replies
View Related
Mar 31, 2010
If I click on the shutdown bottom (in my lower panel) I get an new window to choose if I really want to shut down or restart or suspend or hibernate. Under that alternatives there is an text that says: "[...] The system will automatically shut down in 60 seconds." Why is the text "60" not running down like a countdown? Can I set another (shorter) time for the automatic shutdown (10 seconds)? If so, where? Or shut I just make another bottom to shut down immediately?
I use (normally) OpenSuse/SUSE Linux
Release 11.1
Kernel Linux 2.6.27.45-0.1-pae
Gnome 2.24.1
View 9 Replies
View Related
Nov 21, 2010
i have hd encryption activated on my swap and home disks. now every 20 min or so (not really periodic but definetly reproduceable) my system hangs completely for about 4 - 10 sec while the hd led is on. i have a dual core cpu which makes this even more odd. could this be a side effect of hd encryption especially on the swap partition?
View 3 Replies
View Related
Feb 28, 2010
I recently installed 11.2 and Firefox takes several seconds to connect to each site.I pinged my machine, the gateway, the DNS servers (by IP address), and other various sites (by domain name), all without delay. But when I browse using Firefox, there's a 3-second delay while "looking up", and finally it connects. Any ideas what's causing this? I'm using Gnome and don't have another browser installed to test.
View 3 Replies
View Related
Oct 28, 2010
Sometimes, running "nvidia-settings" will cause the whole desktop to freeze for about 5-10 seconds, spike the Xorg CPU usage up to 100%, until the settings appear where everything goes back to normal.
Running "nvidia-settings" from a terminal does not show any output and restarting X does not help. Any ideas how to figure out what is happening, any places to look for log files?
I am using an up-to-date openSUSE 11.3 (64-bit), KDE 4.5.2, an NVIDIA GeForce 9800GT and the proprietary NVIDIA driver 260.19.12, which I installed manually following the instructions from
SDB:NVIDIA the hard way - openSUSE
View 8 Replies
View Related
Mar 31, 2011
Running 3.3.2 of LibreOffice under 64bit 11.3. When I open a document (.doc) it opens right away, then the cpu spikes for about 8 seconds during which the app is not usable then all is fine. Renamed .libreoffice and made no difference. Tried with both .doc and .odf document types and the same. If I open a empty doc then the spike is a second or 2.
View 9 Replies
View Related
