OpenSUSE :: 11.3 Kde Freezes Up All The Time, Presumably Gfx Chip Related?
Jul 28, 2010
11.3 installation appears to be completely unusable for mission critical workit's running/freezing on a Toshiba a300 laptop, intel 965gm gfx, using the drivers that where installed by 11.3whenever the unstoppable screen/monitor saver kicks in, it freezes the machine irrecoverably.same as: 11.3 kde constant lock upsthe unstoppable screen/monitor saver has been a pain in the neck in 11.2 too, is it possible to COMPLETELY REMOVE any code that will make the gfx go on standby? what a pain when you are watching a movie! disabling everything obvious never worked! wtf?
View 5 Replies
ADVERTISEMENT
Oct 26, 2010
I don't know why but since I upgraded the KDE 4.4 desktop from openSUSE 11.3 to 4.5, the desktop just freezes some times.
If i was listening music, or watching a video I can still hear everything and even move the mouse, but nothing works.
So I switch to TTy1, perform a init 3, then init 5 to restart all the graphic system, and start again. This happens without message, without log, and without clue...
Should I downgrade to 4.4 or this has a Workaround?
View 2 Replies
View Related
Dec 7, 2010
LIVECD of 11.3 Gnome works fine in my old PC. I installed several times and each time system freezes/crashes during boot. I am linux newbie, so, I am trying to figure out my problems. In Livecd I noticed Hardware info list's my SATA disk as IDE. Driver Modules: "ata_piix"Attached to: #24 (IDE interface). Is it right? I have posted Hardware information output in 01: None 00.0: 10105 BIOS [Created at bios.186] - Suse 11.3 install problem My machine specs are: Intel DG31PR motherboard, Intel core2duo, 3 GB DDR2 Ram, 250 GB SATA harddisk
View 3 Replies
View Related
May 4, 2011
Ever since I installed Ubuntu Natty, from time to time, for no particular reason, the entire computer screen freezes, and I am forced to hold the power button on my laptop to restart things with a hard reset. I cannot explain why it happens.
Such an issue never occurred in any of the past installations and versions of Ubuntu. This is a fresh installation of Natty by the way.
Also, I can currently be running a lot or nothing and it does this. Thus, it does not matter what I am actually doing (ie, what programs I might be running).
It has occurred about 10 times since I freshly installed Natty 6 days ago.
View 9 Replies
View Related
Sep 30, 2010
Is it possible to do this? I'm just thinking maybe I can run KDE without using the GPU so that I can use the GPU for computation (CUDA). The system I'm thinking of using is a laptop with Nvidia GTX260M video card. I've seen people talk about frame buffer, but I don't quite understand it because it seems that some people are talking about using frame buffer even when they have a video card on their system.
View 9 Replies
View Related
May 22, 2010
if OpenSuse 11.2 supports the new Intel I7 8 core chip and the motherboard (Intel DX580SO) on Linux Platform?
View 1 Replies
View Related
Feb 3, 2011
I have got a server which has a motherboard with nvidia mediashield raid built in, with Centos installed it picked up the raid 5 array that i had configured as one drive so the os install was straight forward. When i booted the netinstaller of opensuse 11.3 run though the setup, when getting to the partition setup is was picking up the three hdd as seperate drives and not one, so i got to a certain point and aborted the installation and i re run the installer, the raid status said the array was degarded or something which i knew there was nothing wrong with it as i had set it up only about 2 weeks ago and there was one drive missing aswell. So i removed the array and re configured the array and rebooted and the raid status said healthy again as it was before on centos, then i run the opensuse installer again and it went though the process again but completely stop at "Searching for linux partitions" , cursor was working fine , but nothing else was so i had to press reset.
This was my problem, i know kind of what the problem is, but what i want to know is , i thought opensuse is based on rhel same as centos but how comes centos has the drivers for the raid chip i have in my board and opensuse has not.
View 5 Replies
View Related
Jun 23, 2011
I just performed a fresh install of Suse 11.4. It worked great except that the network communication would cut in and out intermittently. I managed to solve the problem posting it here for other users and for future suse releases. I will give the hardware I am running, the symptoms and the fix:
Hardware
=======
Motherboard: Gigabyte GA-H67MA-UD2H-B3
Ethernet controller: Realtek RTL8111E
Default module: r8169 (run lsmod to see loaded modules)
[Code].....
1) First make sure that linux kernel source is installed in your system (yast software management)
2) ensure that gcc is installed (yast software management)
3) Download the latest linux driver for RTL8111E from the realtek website The one that I am running is the 8168 driver version 8.024.00
4) unzip the tarball (creates a directory called "r8168-x.xxx.xx")
5) As root run the autorun.sh from inside the newly created "r8168-x.xxx.xx" directory
View 9 Replies
View Related
Apr 10, 2011
Since I was change my mainboard and sound chip of course kmix doesn't work, I can change the volume but it doesn't effect on output volume it look like kmix have 3 level, Mute, Low and high.
View 9 Replies
View Related
Jan 31, 2010
I know 10.3 is old, but my main reason for using Linux is that I can build a machine and then just use it for 3-5 years without dealing with stupid degradation issues like Winblows.
The problem is that I can't access any 10.3 online respositories anymore, so package management is a big mess. Basically I'm down to manual rpm-ing. If I try to install anything with Yast, it attempts to access 10 different repositories for dependencies, all of which fail because I guess they just don't have 10.3 directories anymore.
I really hate updating my Linux all the time to the newest version, because frankly that usually breaks things.
Not sure what do to. This conundrum often makes me consider if any distributions are better in this regard. But then I don't have a lot of time to play with Linux. What started out as a hobby in 1994 is now a tool, like any OS, that I just want to work. I don't use Linux to use Linux, I use it to run programs.
View 9 Replies
View Related
Jul 7, 2011
Can someone tell my why every time I try to use 7z it freezes my system? I can't move my mouse, I can't type, I can't kill my xsession. I then restart my system and everything returns to normal. When I try to use 7z my system again freezes.
View 1 Replies
View Related
Aug 4, 2010
I have the problem using ubuntu 9.10 and 10.04 they both freezes after some time say like 2 or 3 min after login ..even the live cd freezes too but sometimes it works (its strange ) and when i select the advance option form live cd = acpioff, it works fine form the live cd. however my 9.04 ubuntu ultimate edition works fine. but i want to run 9.10 or 10.04. how to turn off the acpi form command like in regular installation i have xp installed side by side.
View 3 Replies
View Related
Aug 16, 2010
I'm dual-booting Vista and Ubuntu. Ubuntu freezes all the time, like every 5 mins so I don't ever use it. I just do a new installation every now and then to see if it fixes itself but it doesn't. It says that the battery has a low capacity, could this be the cause?it only freezes in Vista when I take out the charger, about at the same frequency as in Ubuntu.
View 4 Replies
View Related
Oct 30, 2009
I have two boxes that were originally used as workstations at a school - they upgraded and sold these.The two boxes are identical parts - Lenovo NetVista M42. I installed 5.3, installed RPMforge per the wiki instructions, did a yum -y update && shutdown -h now.The next day I turned the machine on and installed the UT2004 dedicated server. After a few hours I tried logging in via SSH - I could enter my user and password, but could not get farther. I rebooted the server. After another day the same thing happened. I moved the disk from the first box to the second and moved /etc/sysconfig/network-scripts/ifcfg-eth0.bak to ifcfg-eth0 but retaining the correct MAC address.
During this transition where the server "locks up" some things work and others do not. For example, if I type ping 4.2.2.2, wait 10 minutes and CTRL+C it looks like this (note the time of 0ms).
View 11 Replies
View Related
Nov 21, 2010
My system just crashed and I had to reboot. The only interesting message I have found in the logs before the crash was :
Code:
2010-11-22 07:49:22 linux-lx7s smartd[2259] Device: /dev/sda [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 114 to 115
2010-11-22 07:49:22 linux-lx7s smartd[2259] Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 61 to 60
2010-11-22 07:49:22 linux-lx7s smartd[2259] Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 39 to 40
[Code]...
View 9 Replies
View Related
Feb 21, 2010
The system freezes all the time and I have no idea why, and the temp of core goes up to 56. Also, on the boot, right after grub menu selection, it restarts itself sometimes, again I have no idea why. I have lenovo y530. Which logs do you need?
View 2 Replies
View Related
Dec 16, 2010
I installed ubuntu 10.0.4 TLS version and my desktop freezes after a period of inactive time: the screen doesn't change and the apps do not response. It will resume after any key-stroke or mouse action. Is it a feature of 'power-saving' or something else? I need my ubuntu keep 'alive' all the time.
View 2 Replies
View Related
Jun 6, 2011
After some idle time Slackware hangs up/freezes. When, for an example, i turn on music i can hear it on idle time but after some time music still plays but i'm losing picture (monitor detects no signal), num lock is locked, led on keyboard are turned on but won't turn off while pressing num lock. I've switched off power saving options in Slackware and on bios setup.
My spec is:
X4 620 (without overclocking)
AMD 760G (Radeon HD 3000)
Catalyst 11.5 for Radeon graphic.
BTW - computer works fine with Windows. Also, with Slackware i can work for an hours, many hours and everything is fine but as soon as i leave it for some amount of time = it hangs/freezes. There is something wrong with hibernation. Not always computern is turned off correctly. TV is switched off, slackware logged off but i hear drives working and cooler fans. It should be switched off completly.
View 11 Replies
View Related
Jul 22, 2010
I've recently switched over to gnome desktop environment with gnome-shell preview as my compositing manager.Everything is good except for this process xfce4-notifyd which autostarts somehow..
The problem with this process is it acts as the default notification daemon over-riding gnome-shell's built-in notification support and tends to display balloon popups on the top right corner....If i kill this process everything is good.... But on restart it autostarts again somehow..I looked through the items in gnome-session-properties and also in these places:
Code:
/usr/share/autostart
/etc/xdg/autostart
But couldn't find any entries related to xfce4-notifyd.
View 2 Replies
View Related
Jul 23, 2010
I decided I needed to expand my openSUSE partition because I was running out of room. There was some unallocated space following my /home and swap partitions that I wanted to assign to my / partition.
So after taking note that bad things could happen (as I've read everywhere), I got myself a copy of GParted (since Yast! partitioner doesn't move partitions, does it?) to start getting the thing to work. Well, actually, I got PartedMagic which has GParted (I realize it could be a problem NOW if they didn't have the latest version).
So the first step was to move the swap partition. I decided to do it one step at a time and only moved the swap partition to the end. That turned out fine...no problems whatsoever.
The next step is where the problem came in. It was moving the /home partition. It took a while to move but once it got to the end, it showed a message that was similar in nature to "error detected" without giving a long list of error messages. If it did, I probably would have copied it down. There wasn't anything in the "logs" either in GParted besides what it showed. Looking back, I probably should've went into /vars/logs to get additional log information but I guess I wasn't smart enough to do so (provided that GParted does leave log messages there which I think it does).
After that, it refreshed the drive and it ended up showing no partitions with an error and saying the only thing it can do is create a new partition table. After that, openSUSE wouldn't boot. After loading, (both normal and failsafe modes) it gives me the message in the link at the bottom. I can still access those partitions fine. Nothing's corrupted. Windows also boots up fine (it's on a different drive though) and reads the affected drive fine. Linux-based LiveCDs (including openSUSE 11.3) reads the partitions fine too.
I've tried using e2fsck on my ext4 partitions with commands I found during a search and they seemed to "fix" those partitions but it still won't boot and gives me the same message. Looking at it carefully, it seems the reason it can't find a superblock is because it can't find part8 of whatever that thing under /dev/disk/by-id/ is.
I would very much prefer a failsafe (or at least mostly failsafe) solution that won't (or is unlikely) to result in requiring the restoration of a backup but I do understand that there is always the chance of something going wrong that will kill everything. Considering that I can still access the data on that drive, I don't believe the data is corrupted. Maybe the drive itself (as in whatever signatures it may leave) but not the filesystems.
This is what I end up with trying to boot into openSUSE (sorry, I don't know how to get the log when it doesn't put it in logs directory: https://docs.google.com/leaf?id=0B3A...ut=list&num=50
View 9 Replies
View Related
Mar 1, 2011
My current system ==>openSUSE 11.3 / GNOME 2.30.2
When openSUSE 11.4 comes out i want to
==>Download "Live GNOME"
==>When installing it need to retain contents of "/home/.."
Is this possible?
NOTE:-I don't need to retain contents of other system related directories
View 9 Replies
View Related
Feb 11, 2010
Lately I see a lot of posts/threads on NVIDIA cards and disfunctioning desktops. People rely on older posts and howto's, and run sax2 after driver install (either from repos or "hard way"). Symptoms also appear after updating 11.1 to 11.2 The problems IME are 99% related to conflicts with an existing /etc/X11/xorg.conf, which in 11.2 has become obsolete, though it will be read and used if it's (still) there.
On openSUSE 11.2 we have hardware autodetection and -configuration for everything. So no need for an xorg.conf to configure the X-server. on 11.2, follow this, if NVIDIA driver is installed correctly, but still no proper desktop experience:
[Code]....
View 9 Replies
View Related
Nov 23, 2009
I just upgraded from F11 to F12. Everything seems to be nice except mouse. The mouse buttons (both left and right, except middle one) are accidently frozen for some times. It could happen when opening a new tab in Firefox, launching a program, opening a new windows. I cannot click anywhere but can use mouse wheel. I have to log off/ log in and it becomes normal. It does not happen so frequently (around 3-4 hours) but it is really annoying.
View 2 Replies
View Related
Aug 11, 2010
I installed network-manager-vpnc, configured cisco vpn through NetworkManager. It works slow, but the bigger problem is that after minute or so the connection just freezes.Then I tried kvpnc. It works like it should from speed point of view. But it also hangs up after minute or two.Tried to change MTU of my wired connection to 1500 - no good.Tried to uncomment line in /etc/ppp/options "mru 542" - no good.
Created /var/run/vpnc because it was giving some error "can't open pidfile /var/run/vpnc/pid for writing".From logs everything seems fine except for "nm-dispatcher.action:Script '/etc/NetworkManager/dispatcher.d/01ifupdown' exited with error status 1." in last line. If I use kvpnc it gives no errors.SO, how do I debug this thing or does anyone knows something I don't in this case?
View 5 Replies
View Related
Feb 24, 2010
My system freezes every time I install "Drapes",why?
View 4 Replies
View Related
Apr 28, 2010
I've been using Thunderbird 3.0.x for some time and found in it a good replacement of TheBat. However, few days ago, ubuntu being ubuntu crashed and since then, Thunderbird freezes after 10 seconds every time I try to start it, sending CPU usage through the roof. I have 8 imap accounts in it and my profile folder is ~2.8gb I tried purging the installation. I tried fsck on all partitions. Windows Thunderbird using the same profile folder works just fine.
View 6 Replies
View Related
May 8, 2010
Attempting to install 10.04... I can get to the "Where are you?" screen, then the little circular "please wait" cursor spins forever and ever.
Here are a few things I've tried, with no success:Leaving it alone for hours, hoping it was just taking a really long time. No Dice. Unplugging any hardware that might be causing a problem, including the network card. No dice. Burning it to CD, DVD, and booting from a USB key. No dice. Trying every combination of kernel options I could find in the forums, and setting most combinations found in the "more options" menu in the boot screen. No dice. Booting into the live environment, then installing from there (instead of just choosing "install" directly). No Dice. Booting both from the 32-bit and 64-bit ISOs (my machine is 64-bit)
Note: I have not tried just upgrading from my 9.10 install, and I will not try this. If I can't get a live CD to boot, there's no way I would voluntarily hose my current system by upgrading.
Also note: I checked the MD5 of the ISO, and did the "check the disk for defects" menu option as well. Everything checks out fine.
View 5 Replies
View Related
Aug 10, 2011
I installed Fedora 15 last week, on my main PC, and I absolutely love it. Defintely my favourite operating system. Now I have a few questions. I thought I would put them all in one thread, instead of making seperate ones. I did search before I posted, and I cant seem to find any solution to my problems. So here it goes.
First question, I am using evolution for my e-mail program/client. My email addresses are all hosted by hotmail. Now I have set them all up correctly, but cant seem to send e-mails(I recieve them perfectly fine). I am using the "smtp.live.com" server, and using SSL encryption. I have tried messing with the settings but have had no luck. Has anyone figured out how to fix this?
Second question, I play minecraft frequently, and I am currently starting the program via terminal [java -jar /home/username/minecraft.jar], which works flawlessly. However it is too slow(open terminal, type it in. I need a simple click), is there any other way to start minecraft?
Third and last question, What is the best way to close minecraft? I notice if I just close it(via right click, and close, or clicking the X) it freezes and stays open for a long time. Is there any better way to close it?
View 3 Replies
View Related
Jun 28, 2010
I am trying to install ubuntu netbook edition on my Acer aspire one D150. I have tried to do this before with version 9 with no luck so I waited until 10 to see if the problem goes away; apparently it has not. I put the ubuntu install files onto a USB stick according to the instructions from ubuntu here for windows (I have windows xp on the netbook now).
When I shut the PC down and turn it back on with the USB key inserted, the laptop just seems to hang at the ACER splashscreen. This screen is where I could press F2 for setup or F12 for boot order; the buttons do not respond, the USB key appears inactive. Again, it just seems to hang. I've waited for as long as letting it run all night to see if it goes anywhere by the morning with no luck.
View 2 Replies
View Related
Sep 21, 2010
I'm trying to fix a friends EeePC notebook (Asus) running a recently upgraded Ubuntu 10.04 from Karmic Koala. She used the update manager for the upgrade to 10.04 LTS and everything was fine until she had tried to install something from the Ubuntu Software Center (she doesn't remember what happened). After that, both Update manager and Synaptic stopped working.Update manager gives the following error:Quote:Software index is broken. ... Try to use synaptic for something?!...
Then Synaptic manager gives the following error:Quote:E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report.And when I try that command, the terminal just keeps blinking with the cursor and does nothing for more than an hour. This is the output of the comand:Quote:
jasna@Jasna:~$ sudo dpkg --configure -a
[sudo] password for jasna:
Setting up moodle (1.9.4.dfsg-0ubuntu4) ...
[code]...
View 9 Replies
View Related
