Can someone tell my why every time I try to use 7z it freezes my system? I can't move my mouse, I can't type, I can't kill my xsession. I then restart my system and everything returns to normal. When I try to use 7z my system again freezes.
View 1 RepliesMy system freezes every time I install "Drapes",why?
View 4 Replies View RelatedLIVECD of 11.3 Gnome works fine in my old PC. I installed several times and each time system freezes/crashes during boot. I am linux newbie, so, I am trying to figure out my problems. In Livecd I noticed Hardware info list's my SATA disk as IDE. Driver Modules: "ata_piix"Attached to: #24 (IDE interface). Is it right? I have posted Hardware information output in 01: None 00.0: 10105 BIOS [Created at bios.186] - Suse 11.3 install problem My machine specs are: Intel DG31PR motherboard, Intel core2duo, 3 GB DDR2 Ram, 250 GB SATA harddisk
View 3 Replies View RelatedWhen booting Fedora 11, my system hangs for a very long time on starting udev. Sometimes I get an I/O error. However, my hardware is fine. I do eventually get in to the system.
View 7 Replies View RelatedJust making one last tweak with my fresh install of F12KDE. I need to . How do I do this
View 2 Replies View RelatedI just upgraded from F11 to F12. Everything seems to be nice except mouse. The mouse buttons (both left and right, except middle one) are accidently frozen for some times. It could happen when opening a new tab in Firefox, launching a program, opening a new windows. I cannot click anywhere but can use mouse wheel. I have to log off/ log in and it becomes normal. It does not happen so frequently (around 3-4 hours) but it is really annoying.
View 2 Replies View RelatedEver since I installed Ubuntu Natty, from time to time, for no particular reason, the entire computer screen freezes, and I am forced to hold the power button on my laptop to restart things with a hard reset. I cannot explain why it happens.
Such an issue never occurred in any of the past installations and versions of Ubuntu. This is a fresh installation of Natty by the way.
Also, I can currently be running a lot or nothing and it does this. Thus, it does not matter what I am actually doing (ie, what programs I might be running).
It has occurred about 10 times since I freshly installed Natty 6 days ago.
I installed Fedora 15 last week, on my main PC, and I absolutely love it. Defintely my favourite operating system. Now I have a few questions. I thought I would put them all in one thread, instead of making seperate ones. I did search before I posted, and I cant seem to find any solution to my problems. So here it goes.
First question, I am using evolution for my e-mail program/client. My email addresses are all hosted by hotmail. Now I have set them all up correctly, but cant seem to send e-mails(I recieve them perfectly fine). I am using the "smtp.live.com" server, and using SSL encryption. I have tried messing with the settings but have had no luck. Has anyone figured out how to fix this?
Second question, I play minecraft frequently, and I am currently starting the program via terminal [java -jar /home/username/minecraft.jar], which works flawlessly. However it is too slow(open terminal, type it in. I need a simple click), is there any other way to start minecraft?
Third and last question, What is the best way to close minecraft? I notice if I just close it(via right click, and close, or clicking the X) it freezes and stays open for a long time. Is there any better way to close it?
I don't know why but since I upgraded the KDE 4.4 desktop from openSUSE 11.3 to 4.5, the desktop just freezes some times.
If i was listening music, or watching a video I can still hear everything and even move the mouse, but nothing works.
So I switch to TTy1, perform a init 3, then init 5 to restart all the graphic system, and start again. This happens without message, without log, and without clue...
Should I downgrade to 4.4 or this has a Workaround?
I upgraded to fedora 11 from fedora 10 yesterday, I like it ok but when I put the machine in sleep mode and then go to turn it back on it comes up to the log in screen and thats it its frozen. I hate to completely shut down the machine every time I get off.
View 2 Replies View RelatedThe system runs just fine then all of a sudden it "freezes". For example an input box doesn't respond nor can I scroll down the page. But when the system comes out of the freeze 5-15 seconds later, it suddenly does all the input that was used during the freeze. The scroll and letters suddenly show up. I don't loose mouse control and I can do some other system functions but not all of them.
Here are some various system info's
[osprey@host ~]$ uname -a
Linux host.tranquilpenguin.com 2.6.27.25-170.2.72.fc10.i686 #1 SMP Sun Jun 21 19:03:24 EDT 2009 i686 athlon i386 GNU/Linux
[osprey@host ~]$ firefox -v
Mozilla Firefox 3.0.11, Copyright (c) 1998 - 2009 mozilla.org
[osprey@host ~]$ df .....
Whenever I press Crtl + Alt + F2 or any F Key Everything just freezes instead of open a new TTY/Terminal ?
View 3 Replies View RelatedI am running the Nvidia driver. My system freezes randomly. I've had to reboot my system over 5 times today alone. When it freezes, everything is frozen, even the second hand on the analogue clock. One more issue, and I'm not sure if it's related, my stupid screen goes black after 5 minutes of no typing or mouse movement. This never happended when I first installed it. The issue just started within the last 3 weeks. Kpackage Kit is hidden. I was using it to do my automatic updates. Now I just use yum. between the time I first installed Fedora 12 and now, something has happened to my build to cause these issues.
View 14 Replies View RelatedI'm getting very random full system freezes with F13. The keyboard stops responding completely. Sometimes the mouse (and the mouse only) still works. I those cases, I can log in via ssh, kill kdm, and everything goes back to normal until the next freeze. However, in most cases, I have to do a hard reboot. Sometimes the system goes on for days without a problem, and sometimes it freezes 10 times in a day (It's in one of those days that the bug-screen saved me from flying out the window). I also had this problem on F12. I'm not sure if its video-driver related as both nvidia and nouveau experience this behaviour. In fact, I'm not at all sure what the cause may be.
View 14 Replies View RelatedJust recently installed fedora 11 64-bit on my laptop. Everything was fine until today. Everytime I boot up, it crashes right after the desktop loads. Everything is loaded except the area where the running programs are on the taskbar is just one big white block. And a bubble popup says "New SELinux security alert. AVC denial." but everything is frozen. Can't move the cursor or use keyboard. and nothing is happening on the screen. Completly frozen. Anybody have any ideas on what is wrong and how to fix it?
View 3 Replies View Relatedevery time I watch a DivX movie on the internet my system freezes permanently. So I have to restart. I can�t recognize any regularities: it happens in periods of 15, 20 or 30 minutes....
I use:
-F13 with latest updates
-Nvidia 8600M GT with nouvau driver
I tried installing F14 and F15 but display resulted in freezing. The display would work upto "Check Media/Skip Test" for media during installation and the system freezes immediately after that. So I did a VNC installation from another system. But the initiation of X would always result in hanging of the box. After googling and trying various solutions, I found a ray of hope in one solution which suggested adding "vesafb:mtrr,ywrap vga=0x318" to the kernel arguments. This resulted in displaying successfully the boot-time flash (Fedora logo being filled with white color) during booting. But "startx" or "inittab 5" result in hanging of the system.
The following is the relevant information:
I see 5 monitors and 5 cards!
Code:
# lspci | grep ATI
09:0c.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
09:0d.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
Code:
# cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
Screen 3 "Screen3" RightOf "Screen2"
Screen 4 "Screen4" RightOf "Screen3"
Screen 5 "Screen5" RightOf "Screen4"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection .....
who is having issues with lockups check their /var/log/messages for this
May 28 11:41:21 shayne dbus: [system] Activating via systemd: service
name='org.bluez' unit='dbus-org.bluez.service'
May 28 11:41:21 shayne dbus: [system] Activation via systemd failed for unit
'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such
file or directory. See system logs and 'systemctl status' for details.
May 28 11:41:21 shayne dbus: [system] Activating via systemd: service
name='org.bluez' unit='dbus-org.bluez.service'
[Code]...
Lately (F14 and F15), Nvidia's drivers have been making my system freeze unexpectedly when running X. The only work around I have is reverting to an older driver (173.14.30). Although no freezes occur when using the older one, I need the latest one to run a few games sometimes. The odd thing is that when running these games within Wine while having the latest driver installed prevents the system from its usual freeze. I'd just like to solve this problem so I don't have to consistently revert back and forth from the two. I have a Nvidia Geforce 8800m gts and I am running F15 x86_64.
View 14 Replies View RelatedI'm having trouble starting Fedora 14 on my computer. The startup procedure freezes while starting system logger. Before this started happening, I had formatted one of my logical disk partitions which is supposed to be mounted under the /var directory. I think may be the cause of this problem. However, I don't know how to fix it, as I can't get into the Linux command line to do a umount. I don't have a CD with which to repair the system, so is there any way to fix this problem without one?
View 1 Replies View RelatedI love it but I have a problem that someone can hopefully help me troubleshoot. The system intermittently crashes, the screen freezes and nothing works except the mouse pointer which can be moved but not used. Is there a way for me to diagnose this
View 4 Replies View RelatedAfter yesterday system update the x server won't start up anymore. It locks immediately with blank screen leaving the computer unresponsible until hard reboot. I hat to once again go with the "vesa" driver, as I mentoined earlier in another thread it is a life saver, always works. My video card is integrated Radeon HD3250 - video driver was fglrx from ATI itself. "radeon" driver now reports that modesetting is not supported and will not load with EE-type X server error.
Anyone else experienced this? Are there any changes in the most recent X server that once again break compatibility with the official ATI driver?
Until a recent software update, I encountered no problems when 'Safely Removing' my external hard drive.
After the following update:
Aug 23 14:36:03 Installed: kernel-devel-2.6.35.14-95.fc14.x86_64
Aug 23 14:36:13 Installed: kernel-2.6.35.14-95.fc14.x86_64
The system freezes when I try to safely remove the drive. What I see is the blue screen with the Fedora logo, the caps lock key lights up and the system is totally frozen. Following is the information on my external drive gleamed from the messages log file when the device was mounted:
Aug 26 07:53:03 localhost kernel: [ 496.855476] usb 1-1.2: new high speed USB device using ehci_hcd and address 7
Aug 26 07:53:04 localhost kernel: [ 496.942025] usb 1-1.2: New USB device found, idVendor=1058, idProduct=0704
Aug 26 07:53:04 localhost kernel: [ 496.942031] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[code]....
I upgraded from FC10 to FC11 yesterday.I had no problems using FC11 after I looked into the bootloader (not intuitive - Ha!).Tried to boot up this morning; and things seemed to work well until I tried to call up Firefox (added a few themes yesterday).The window pops open; but the computer freezes on the spot with an alarm (generic "beep", w/o the finishing "p").Tried it with Epiphany; and I get the same results with the exception of actually getting to the Home Page.Yum works for the most part - I reinstalled Firefox (no effect); but couldn't reinstall epiphany (keeps saying "there is no such package - did you mean 'epiphany'". No typos on my part - go figure). Doing Software/Package Updates (via System Menu) freezes the box as well.Did it with the system monitor on. It doesn't appear to be related to CPU Usage.
Had a FC10 liveUSB and used it for awhile (e.g. to check out the forums). After giving my ISP some grief about downloading speed, immediately received a note from their Abuse Department, saying that my machine had been infected with a virus and had been sending spam emails (post upgrade to FC11).
I have dual boot Windows 7 Pro and Fedora Core 13 (Round 1)If I change the time on Windows it bumps my Fedora time backwards 6 hours (Round 2)if i change the time on Fedora it knocks my Windows time forward 6 hours
This is only a two round bout, the judges are picking the winner. What do you all think? The obvious solution is just change the time zone in one of the systems to compensate. I was just looking for other ideas.
I have a desktop PC with Fedora, Ubuntu and Windows installed and grub used for multibooting. But time in Fedora is always 5 hours behind. If I change the time in Fedora, then Windows and Ubuntu will be 5 hours ahead of the current time. I don't understand how to fix it.
View 2 Replies View RelatedI'd like to install Fedora 14 64bit as a dual boot on an existing win 7 32bit system. When I boot with the Live CD, after selecting "boot" in the Fedora boot selection menu, I get a grey screen with a white cursor, and the system freezes. I checked the Live CD on my laptop and it worked perfectly.
My System:
MotherboardASUS P5Q DELUXE
CPUIntel Core 2 Duo E6750, 2,66 GHz, Sockel 775
[code]...
I am running my Ubuntu 32 bit server on top of Windows 7 64 bit with VirualBox. It's a 2 core Atom. It's been working good for about half a year. But the last about 6 weeks the system time only in Ubuntu is going slow. About -8 per 24 hours! I can only guess because I have more things running in my Windows 7 and Ubuntu.
I can set it right by coping the hareware time to system time with this command:
Code:
hwclock --hctosys
I want to run a crontab to have that command run every minute. But it don't seem to run.
[Code]...
I have the problem using ubuntu 9.10 and 10.04 they both freezes after some time say like 2 or 3 min after login ..even the live cd freezes too but sometimes it works (its strange ) and when i select the advance option form live cd = acpioff, it works fine form the live cd. however my 9.04 ubuntu ultimate edition works fine. but i want to run 9.10 or 10.04. how to turn off the acpi form command like in regular installation i have xp installed side by side.
View 3 Replies View RelatedI'm dual-booting Vista and Ubuntu. Ubuntu freezes all the time, like every 5 mins so I don't ever use it. I just do a new installation every now and then to see if it fixes itself but it doesn't. It says that the battery has a low capacity, could this be the cause?it only freezes in Vista when I take out the charger, about at the same frequency as in Ubuntu.
View 4 Replies View Related