I want to know if there any way to find out interface of Linux Box(Suse 9>)is onboard or externally attached (pci slot)?
Note:- This is a problem which I am facing in my work. In onsite server we need to configure n/w card too. So some time when we configure, I'm confusing which interface should be configured. Client insisting us to configure embedded(onboard) interface. How to find out that.
Find external and internal devices attached to a system in Linux
How can i find through terminal that which devices are external and which are internal.
By external i mean devices attached to USB port. For Example, USB Drive, Portable USB HardDrive etc
By internal i mean devices attached internally. For Example, SATA Harddisk etc.
How can i find through terminal that which devices are external and which are internal.
By external i mean devices attached to USB port. For Example, USB Drive, Portable USB HardDrive etc.
By internal i mean devices attached internally. For Example, SATA Harddisk etc.
from vuze(bit torrent client) it shows my total download speed to be 20.56 KB/s....while my network monitor tool shows a speed around 72.41 KB/s. Similar is the case with upload speed. In much simple words the download/upload speed that vuze shows appears to be less than that shown by the network monitor tool.I must mention that at the time vuze was running there was no other simultaneous downloads.I don't understand why this is so?Is there any tool that can give me the exact information of downloading & uploading speed or rather any tool that can give me the details of uploads/downloads presently going on.
View 2 Replies View RelatedI have two machines, a laptop and a desktop, both running Lucid. each works fine, but... I can't seem to mount the external drives attached to either machine over the network. I can share folders from the internal drives fine but when I try to access an external drive from either machine I get "unable to Mount volume". Is it possible to mount the external drives across the network? If so, How?
View 1 Replies View RelatedHow can I find a MAC of hardware attached via ethernet cable? I have been working nicely with an industrial scanner that is controlled by a Linux PC via an ethernet cable, but the hard drive has died I need to get it working again. The problem is that the main PCB has a Realtek RTL8019AS ethernet controller chip: [URL] which I believe is used in the most basic way possible, applied straight off-the-shelf and unconfigured. To utilise the chip ARP commands are used to assign an IP address to the chips MAC address e.g. something like:
arp -s 192.168.2.5 00-05-a4-00-a8-f8
Unfortunately the actual MAC address was lost along with the HD Th only thing I could have a reasonable guess at is that the chip will have a default subnet of 255.255.0.0 or 255.255.255.0
I have a DELL running CentOS 5.4 with 2 active NICs, one with an external IP address (eth0) on 123.456.78.9 and another that is connected to our internal network (eth1), 192.168.2.x. When I reboot the server, everything works glowingly. External traffic is correctly routed over the external interface (eth0) and internal traffic over the internal interface (eth1). After some random amount of time, a couple of hours and sometimes a couple of days, all traffic starts getting routed over our internal network, so DNS requests fail, internet pages don't load, smtp connections fail, etc.
I'm assuming that everything that's not headed for our .1, .2 or VPN internal networks would go out the external interface. And why this works for a period of time and then stops working is beyond me. And when external traffic starts going over the internal interface, I just reboot and it starts working like it's supposed to again.
I had installed Ubuntu 10.04 onto an external hard drive connected by USB to my laptop:
sdd partition
Windoze still resides on the box's internal hard drive:
sda2 partition
I also partitioned the internal hard drive so that I have a repository where my documents etc can be accessed by either linux or windoze:
sda3 partition (FAT32) I'm assuming that Grub is on the external drive somewhere - as is probably now the Windoze MBR. I'd like to be able to give my wife the ability to start the box (and boot into Windoze) when the external drive is not attached (so that she doesn't have to take the latter with her when she needs to be mobile with the computer). What do I need to do to move grub and the MBR back onto the laptop's internal drive? Or, I suppose: What do I need to do to obtain the functionality that I'm looking for? I'm getting somewhat more comfortable with the command line but, I still need a bit of hand-holding
I have a 9.10 fully updated install on an old P4 HP desktop that otherwise runs flawlessly. We moved it to the bedroom to use as a media center and when I plug in a Thermolake toaster with a Hitachi 750G SATA drive it is recoginized and available no problem. I can read/write no problem. It works via nfs4 no problem. The issue is if I reboot while the drive is attached it the machine refuses to reboot and hangs on the initial hardware screen not even showing a grub screen. This has always been a native ubuntu machine with no dual boot or any weird grub2 issues previously. Interestingly, I am getting the exact same issue with another HP desktop (Celeron machine) with 9.10 Server 32bit that I' using as a home server. This is obviously a bigger problem because if the server updates or requires a reboot for any reason I can't just leave the drive attached. This drive houses our movie and music collection.
View 9 Replies View RelatedI am using ATI HD3200 graphics card, and running Ubuntu 10.04 Lucid on a laptop. It have VGA port so I can attach external LCD monitor to the laptop. I am using fglrx driver.
My question is how should I configure the xorg.conf file so that when I attached external monitor, the GNOME menu bar (Applications, Places and System, etc) will be put on the external monitor instead of laptop LCD monitor.
I have checked varies web resource that saying you can drag and drop the GNOME menu bar to the new screen, it never worked. Someone also suggested to add new bar into the screen and GNOME will remember it, I can't even find the option to do that.
I have RedHat Linux running on my VBox guest on my Windows host. I need to install RedHat Linux on the attached external usb hard disk ,connected to my guest machine.how can install redhat on this external usb hard disk?
View 12 Replies View RelatedI just built a computer and the onboard nic pluggin is loose and won't register or connect right... so I had to put another nic card in pci to connect to wired network for internet. Problem now is its delaying something fierce... i'm thinking if i can manage to uninstall or disable the onboard nic maybe things would work better... problem is i wouldn't know how to do it... I know hardware is connected via a document somewhere in the file system... if I were to delete the file would that disable the nic or would it just reinstall itself on the next boot?
View 1 Replies View Related1. When booting standalone (no extra display) everything works just fine
2. After plugging in an external display on VGA slot, the boot process hangs during xdm start
Config:
OpenSuse 11.3
KDE environment
DELL Latitude e6510 with 8G of RAM
Graphic card is DDR3 NVIDIA� NVS 3100M 512 Mo
Having had an old machine running SMEServer for some time, I've decided it doesn't suit my needs and I've gone the Ubuntu Server 10.04 root. I'm having trouble connecting to a HP LaserJet 5P attached to the parallel port of the server. I had no trouble connecting to it when the server was running SMEServer, however, as this distro is aimed at Windows clients, the printer was configured as a Samba share.
In the new 10.04 configuration, I do not have Samba installed as I have no need for it. I'm exclusively Linux based (Ubuntu 10.04 desktop). Surely I do not have to install Samba in order to print?
My PC is connected to a HW router which in turn is connected to a modem
Code:
internet-----modem----router----PC1
Is there a console command (e.g. in telnet) to get my external (public) IP?
i am going to buy a netgear wpn311 internal wireless networking card for my desktop i believe it has an atheros chipset.
can i install the wireless card in my desktop's pcie x16 slot?
Bought a couple new cards to do some bitcoin mining (just an experiment) and before I hook them up I want to know how to use p2pool. im not that good with ports and was wondering how to correctly configure it. I keep getting Bitcoin is downloading blocks errors.
Edit: Im also getting a low mhash rate of 1.5. Is this correct for a geforce 9400m? Im not too worried about it after I use these new cards. and is there a difference in using laptops vs a pci slot desktop video card?
I just had an ATT Uverse RG installed. However my Smoothwall router that previously worked fine with the ADSL SpeedStream is no longer accepting an address assignment DHCP ip address from this new gateway. (3800HGV-B)Any thoughts ideas or experience working with this hardware? ATT only supports Windows and Mac
View 2 Replies View RelatedI have a ppp0 entry with post-up options like this
mapping ppp0
map none photon-plus motorola
map timeout: 12
[code]...
I have a Lenovo W510 loaded with Ubuntu 10.04 but it does not detect my onboard 3g modem
View 4 Replies View RelatedI am facing problem with onboard lan card. i think its not detecting. when i type ifconfig command it shows below details
I have installed red hat. but not able to give ip.
This is my first attempt switching to Ubuntu from Windows, and I am having some trouble getting the on-board ethernet to work in Ubuntu 9.1. I have a MSI KM2M Combo-L VIA KM266 and VT8235 Chipset which uses the Rhine II chipset. I am trying to use the onboard ethernet, however it does not connect to the network after installing Ubuntu, although the driver appears to have been automatically installed. I also tried this with several other network cards (Intel, Dlink, Netgear) with various chipsets, but none seem to work.
Our network Netgear switch/router has DCHP enabled, and all of the Windows computers connect just fine. This is true even when we plug another computer into the ethernet cable serving the Ubuntu computer. When I manually configure the IP address, it shows the network connection as connected, but it is unable to ping and/or connect to the internet (except for localhost and the assigned IP address). I used 192.168.11 as the IP, 255.255.255.0 as the netmask, and 192.168.1.1 as the gateway. Below are several commands, that I've run to provide some additional information (using auto eth1).
[Code]....
I own a Tascam US 122l USB audio interface. I just figured out how to run this thing with jack. Unfortunately the (output) sound is very very choppy and I am not able to use the volume control at all. how i could fix that? Or is there maybe a way to use my interface without jack and directly through alsa?
View 6 Replies View RelatedI just bought a gigabyte sniper motherboard and when I installed ubuntu 11.04 it does not recognize my internet bigfoot E2100 1 x Bigfoot Killer E2100 chip.
View 5 Replies View RelatedI have two onboard gigabit Ethernet ports and 3 10Gb add-in fiber ports. When everything is cabled but nothing is IP'ed yet, I do an ifconfig -a and the two gigabit ports are showing as "__tmp2143330114" and "__tmp1076785124", eth0, eth1 and eth3 show as the 10Gb addin cards. On other (identical) servers, eth0 and eth1 are always the gigabit ports and eth2, 3, and 4 are the 10Gb ports. Anyone know what is going on?How can I make sure that Red Hat detects and assigns these ports correctly on boot, or at least can I reassign what ports are designated eth0-eth4?
View 6 Replies View RelatedDoes anyone know what is the best open source proxy solution out there? What we need out of the proxy are the following: Access Control - There should be a web interface for managers to login and create proxy user ID's for external people Good password complexity requirement Lock down the allowed websites
View 1 Replies View RelatedI have used a wireless LAN PCI card for 3 years and now I want to switch back to the onboard wired LAN card but I cant get it to recognize and I have enabled it in BIOS also the wireless LAN card has been removed.Should I put it back in and then try to switch?
View 6 Replies View Relatedwas assign to set up a network server that has 4 land card including the onboard 3 dsl connection
View 1 Replies View RelatedI have installed Fedora 14 on Intel's DH67BL mother board, which has a on board LAN port, Fedora 14 does not detect on-board LAN. Unfortunately, intel does not provide any driver support for linux OS :-(. However, if I install an additional LAN card, Fedora 14 detects it and everything works fine.
View 5 Replies View RelatedI have a 2nd ethernet card in my system that I use to share my internet connection. eth0 is connected to the internet, and eth1 is used for my 2nd computer to connect into. Whenever the 2nd computer is turned off, eth1 forgets its ip address, then when then 2nd computer is turned on, it can't access the internet until I reset the ip address on eth1 ("ifconfig eth1 up 192.168.1.1). I only see this behavior under ubuntu 10.04, not the previous distro that ran on this box, slackware 12. How do I keep eth2 from forgetting the ip address when no computer is attached?
View 6 Replies View Related