I have RedHat Linux running on my VBox guest on my Windows host. I need to install RedHat Linux on the attached external usb hard disk ,connected to my guest machine.how can install redhat on this external usb hard disk?
View 12 RepliesI have Red Hat linux server with update 8. Explain me in detail how to connect external hard disk to linux server so that it will detect it. Also let me know how can i come to know whether the linux server has detected it. Also how to copy the linux server harddisk content/data to this USB External hard disk
View 8 Replies View RelatedCan i install old versions of redhat linux (like versions 3,4,5) for SATA type hard disk. I heard that SATA disk will allownew versions of redhat linux only.
View 4 Replies View RelatedI had installed Ubuntu 10.04 onto an external hard drive connected by USB to my laptop:
sdd partition
Windoze still resides on the box's internal hard drive:
sda2 partition
I also partitioned the internal hard drive so that I have a repository where my documents etc can be accessed by either linux or windoze:
sda3 partition (FAT32) I'm assuming that Grub is on the external drive somewhere - as is probably now the Windoze MBR. I'd like to be able to give my wife the ability to start the box (and boot into Windoze) when the external drive is not attached (so that she doesn't have to take the latter with her when she needs to be mobile with the computer). What do I need to do to move grub and the MBR back onto the laptop's internal drive? Or, I suppose: What do I need to do to obtain the functionality that I'm looking for? I'm getting somewhat more comfortable with the command line but, I still need a bit of hand-holding
I had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
View 2 Replies View RelatedI have read other posts regarding the installations of different distros on external hard disk, but these did not help..
I want to install fedora 12 on a new external hard disk, so that i can boot from it on any system that supports booting from usb hard disk, and do all my work from the extenal hard disk itself. I want to know the exact procedure to install fedora on extenal hdd, and what do i need to do, so that the grub, (which i will install on the /boot partition of external hdd), get detected by the primary boot loader of mbr..
Or, I just need to boot from external hard disk.. please any one try to make it possible.
I would like to build a bootable system image on an attached hard disk on a running CentOS machine.The hard disk would be moved to a headless server, where only SSH access would be available. It seems that all the documented install methods assume that the installation runs on the taget machine. In this case, I would like to create a bootable system image of CentOS on a running host system. The new install mage would generally have a newer version of CentOS than the running host system where the image is created. Also, I would prefer
to do a text-based install.
The reason for all this is that I have network access to several remote machines. I can ask disks to be moved between machines, but I have no physical access. In order to do software testing, I would like to have several system disks with different installed CentOS versions. It would be easer if I could build the system disks on one single machine. The hardware an all machines is very nearly identical.
Can't delete files from external hard disk.
Getting message,"Input output error or unreadable/corrupted file"
Is there any way to delete this?
I plan to reformat & reinstall my linux (centos).Before doing this, I got to backup my files into my USB external hard disk from Seagate (FreeAgent). The problem I faced is that I could not copy file into the hard disk even I was in root user. It prompted me that it is only read-only. I just wonder why.I have tested with my thumb drive. It worked. May I know why I could not copy file to the USB FreeAgent hard disk. Due to file system?
View 3 Replies View RelatedI recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code:
sundar@sundar-sundar:~$ fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
[code]...
I really need some help here. I was installing Ubuntu 11.04 supposedly on a Desktop but I had my external hard disk connected via USB. This external hard disk had two NTFS partitions with lots of important personal and my works.
I accidentally installed Ubuntu upon it and I believe I had created new Linux partition for the Ubuntu installation. Is there any way to undo everything?
a friend of mine just given me an old 2004 IBM NetVista 8305 desktop and suggested to use Linux Ubuntu which is something new to me. So i installed it via USB memory stick & it works. After installation of the OS I am impressed with functionality & speed. when i conect the external hard drive via usb it doesn't show & i tried my usb flash disc it showed the same problem. I tried both disk in my laptop (Windows XP) & it works.
View 8 Replies View RelatedCopy of IBM Server hard disk data to Another USB External Hard disk?
View 2 Replies View Related1. When booting standalone (no extra display) everything works just fine
2. After plugging in an external display on VGA slot, the boot process hangs during xdm start
Config:
OpenSuse 11.3
KDE environment
DELL Latitude e6510 with 8G of RAM
Graphic card is DDR3 NVIDIA� NVS 3100M 512 Mo
I recently installed openSUSE 11.4 on another hard disk of my 11.3 machine. I have another drive in my computer that is used solely for extra storage. Before installing 11.4 I could boot my computer with or without the drive installed, but now if I try to boot without it I get Error 17 from GRUB. I don't understand this as there is nothing on that drive that should be needed by boot and I can find nothing in the GRUB configuration that references the drive.I am getting ready to clear the whole system for a fresh install anyways, but it would be nice to know for future knowledge what is causing it.
View 9 Replies View RelatedI'm trying to figure out how to perform a minimal install to a USB attached hard drive. A full install works just fine, when I start the install from the LiveCD desktop, all the USB drives are visible and can be installed to. In the minimal install, the requisite kernel modules for USB storage don't seem to be loaded, therefore, my USB hard drive is not visible and cannot be mounted, partitioned, or installed to.
The reason behind this is I'm trying to build an XBMC install on a USB hard drive and want only the minimum backend OS that's necessary as some of the Ubuntu desktop software causes issues with some of the XBMC software. I've posted on the XBMC boards about this, but my questions have gone completely unanswered,
I have an external hard disk for USB port. I formatted it on MS for NTFS system.working fine on MS. But can not write while on Debian. Permission denied. Want to use for both on Debian & MS.
View 1 Replies View RelatedFind external and internal devices attached to a system in Linux
How can i find through terminal that which devices are external and which are internal.
By external i mean devices attached to USB port. For Example, USB Drive, Portable USB HardDrive etc
By internal i mean devices attached internally. For Example, SATA Harddisk etc.
whether all 2TB external hard disks will run on ubuntu 10.04 (lucid)? I was under the impression that Seagate and Western Digital would, but the store where I went to buy it told me they won't. I really need to buy an external hard disk as I'm running out of the space
View 9 Replies View RelatedI have a storedge 3511 array attached to a centos 4 system and need to upgrade to redhat 5. 1) How can I find out how the array was attached to the system? and/or 2) What do I need to do during the install for the array to be recognized?
fdisk -l output:
WARNING: GPT (GUID Partition Table) detected on '/dev/sde'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sde: 4998.3 GB, 4998352076800 bytes
255 heads, 63 sectors/track, 607681 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sde1 1 267350 2147483647+ ee EFI GPT
How can i find through terminal that which devices are external and which are internal.
By external i mean devices attached to USB port. For Example, USB Drive, Portable USB HardDrive etc.
By internal i mean devices attached internally. For Example, SATA Harddisk etc.
I need to know how and what to use to format a USB external Hard disk with linux as i dont want anything that can be read with windows.
View 1 Replies View RelatedMy external hard disk cannot be opened
My Passport Essential
Read more @ : [URL]
I have just updated to karmic, and I found that my external hard disk partitions, previously mounted under /media/disk and /media/fat are now referenced by something looking like a UUID, namely /media/7b096ea4-60ee-46b1-95cd-1851b051c40d and /media/4951-95D9.
Is there a way to revert to the old settings? Any application relying on the files on the external hard disk has now stopped working. While I certainly could just change reference (assuming the UUID does not change every session), I'd rather use the old names if possible.
I've 2 computers (one at the job, one at home), different motherboard types but same chipset, having AM2 AMD CPUs but different clock speed. I don't have (I don't want to buy) internal hard disks for these computers.
I would like to buy one external USB HDD and install the latest Ubuntu. I will carry this HDD to my job and my home. Is it possible to use this HDD as boot HDD on both computer? Even they are not same just similar? Is this a problem for Ubuntu?
I am trying to mount an external hard disk using a USB docking station
I can see the entries for different partitions of the hard disk in fdisk -l but there is no node file created in /dev folder. So, I am not able to mount.
Something like this -
#sudo fdisk -l
Disk /dev/sdd: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xf5bdf0ff
[Code]....
I have an external hard-disk with two partitions, a fat32 and an ext3.I open gparted to resize the partitions but the only allowed operation is to check for information (see screenshot).
View 2 Replies View Relatedmy old pc died not long ago so I retrieved its hard disk and bought a USB enclosure. that HD had a ubuntu 9.04 partition and an XP one. Something must have gone wrong somewhere as, although i could still boot from jaunty, I was not allowed to upgrade.
It therefore seemed to me natural perform a clean install, so here's what I did:
- on a win7 computer, I inserted a 9.10 bootable disk
- with usb-disk creator, I wanted to install via a spare image so re-formatted the HD
- I couldn't install a mythbuntu 9.10 after that as I giot an error message ("can't mount the drive" or something similar). yet, in win7 the HD is recognised.
So, what am I doing wrong? Are USB HDs not included as USB devices that you can make bootable? Or should I be installing a !straight" ubuntu version, then install MythTV?
My ubuntu login window seems to be chrased and seems no way to restore it. I was planning to move ahead with reinstalling it but could any1 tell me how can i copy data to external hard disk. I am in Mannual restore section with promt staying at root@ubuntu :/#
View 9 Replies View RelatedI have an external hard disk with lots of big files and a lot of small matlab script files .m. I would like to grab all the files inside that harddisk that have the .m extension or the *.mat file extension (both are matlab files). Of course this is a
-first-find the *.m files script and
-then copy the files into the hard disk.
What I do not know is how I can also keep the structure of the folders containing the *.m and *.mat files when I will copy them in my local hard disk. As this external hard disk contains 2TB of data it is not possible to copy all the files first and then remove the unnecessary. So I have to find and copy only the files I need but with also keeping the tree structure that the external hard disk has.