Networking :: Can't Access Website Gives Error 2082 2095
Feb 3, 2010can't access website gives error 2082 2095
View 1 Replies
ADVERTISEMENT
Networking :: Can't Access RH Enterprise Server 6 Website
Apr 4, 2011I set up an apache webserver on a redhat enterprise server 6 last week. It works fine on the localhost. However, the webpage can't be accessed from the other computer. I didn't modify anything related to 'allow,deny' in httpd.conf. The only thing I've done is I added a rule in iptables to approve the access from a computer with a specific IP address. Since I am quite new to iptables, I don't know if there is anything wrong with my setting.
Even I stop iptables, the problem is still there. I don't know if my setting of iptables is correct. Or, there is anything else that I should do?
Networking :: Ping To A Website But Can't Access It Graphically Using Webbrowser?
Jul 2, 2010i can ping to 192.168.10.104 but can't access it graphically.i am using firefox.. distro is ubuntu.. i do //192.168.10.104:9345..but it takes no response.can u help me.. i am using direct connection..
View 6 Replies View RelatedCentOS 5 Networking :: Access Website Via An External Server Through Proxy
Mar 30, 2011i have a website named [URL]... now i want to access this website using proxy server(squid,or etc...) under my personal server named [URL]...means that [URL]...
View 4 Replies View RelatedGeneral :: Open PORT 2095 ?
Feb 28, 2011How We can Open PORT 2095 IN linux
View 3 Replies View RelatedFedora :: Why Cannot Access Website?
Sep 9, 2010Using Fedora 13,The Website shows well in Local host, but no able to access it from any other host.I get the error message " The server at xxx.xxx.xxx.xxx is taking too long to respond".
View 13 Replies View RelatedGeneral :: Can't Access Some Website
Jun 17, 2010i'm using fedora 9 and mozilla 3 with dsl internet connection. i can't access some site in my computer but other computers can using internet explorer. i hope this is the right forum for this.
View 8 Replies View RelatedFedora X86/64bit :: Can't Access Website
Oct 12, 2010Our setup is 64bit F13, Firefox/NoScript, KDE, when trying to access www.nook.com we get a long pause followed by "server not found" message. We can change to another hard drive and boot WinXP/Firefox/NoScript and we a get a redirect to:http://www.barnesandnoble.com/nook/i...refront-_-nook
You can see thread about it here also:http://www.linuxquestions.org/questi...-linux-835160/
General :: Unable To Access Website
Sep 29, 2010I just bought the Barnes & Noble Nook eReader for my wife's birthday and a requirement is to log on to the Nook website and establish an account. Using her Fedora 13 64bit desktop and Firefox she repeatedly tried to access the website www.nook.com to create an account, however consistently got the server not found message. Even using the Firefox addon User Agent Switcher and turning off NoScript did not correct this.
When we switched over to the WinXP install and Firefox we were able to access the website no problem. Anyone else unable to access that website via linux?
General :: Apache Website Access
Dec 26, 2010I have web server apache on linux Centos. I can access it successfully by typing on the address bar http://localhost, 127.0.0.1 or 192.168.0.150 from the local computer server and the site loads normally with graphic. When I access the site from another computer in the same local network, I don't get the correct website. I see the site like html as text not graphic. Please see below text file output from the browser: Also I can only access the site by typing 192.168.0.150 IP address in the address bar. When I type http://localhost or 127.0.0.1, the site does not come up. Do you see what I did wrong? How can I fix this problem.
View 7 Replies View RelatedGeneral :: Block Access To A Website On Lucid?
Sep 1, 2010I am trying to block a few websites on a lucid lynx, I tried editing /etc/hosts and that blocks access via url but the site still open if I enter the ip on the browser, how can I block ip access also? (without using any extra software besides what linux 10.04 have by default)
View 1 Replies View RelatedUbuntu Servers :: Can't Access Website Over Internet
Oct 8, 2010I have ubuntu 10.04 running LAMP and proftpd, I can access over LAN but not when I type my domain name in. I have forwarded all necessary port to to the local ip of that box, added rules to ufw to allow traffic on those specific ports. I use dyndns for a second level domain and have used all their tools to check whether the ports are open and have the results I am looking for.
View 7 Replies View RelatedUbuntu :: Painfully Slow Access To Particular Website
Sep 1, 2011I'm having difficulty accessing http://egrants.ed.state.pa.us/v2/default.asp while using Ubuntu 11.04 and Ubuntu 10.04.I've tried chrome, firefox and opera as well as three different ISPs. My Windows machines don't seem to have this problem.
A little background:My agency has several offices, some with different ISPs, but with essentially the same setup: ISP router/modem --> Ubuntu Server with Squid/Dansguardian --> Switches, etc.When we first started encountering this problem I thought I had to have had something going on with Squid/IP Tables or something of that sort. I connect my laptop (running Ubuntu 11.04) directly the ISPs modem/router and have the same slowness. I figure that maybe the site is having problems. I ask the other tech in my office to try it out (he's running Windows 7) and he has no slowness with the site when connected directly to the ISPs modem/router.For the time being I've circumvented the filter box for the Windows users who need access to this site, but I'm not certain that's the best solution.I contacted the site's tech support several times and just gotten a "we'll call you back".Any suggestions on things I can check/change with my setup to get this working?
Debian :: Give Access To Website In /etc/host?
Apr 13, 2010I want to give some web address to host file and except these web address no website will open. For example I give permission for [URL] and [URL]. The user just enter these 2 website. Other websites will be blocked.
View 6 Replies View RelatedGeneral :: Restricting Users To Access A Certain Website?
Apr 22, 2010I have an internet and mail server installed CentOS, and I want to restrict client machines to access a certain website, e.g. if i want restrict users from accessing the website: www.mydomain.com, How do I do it?
View 6 Replies View RelatedServer :: Website Cannot Access Using Squid Proxy
Feb 1, 2010My company is using Squid Proxy 2.6 for internet connection. Recently we implement a Webmail system. This is the link [URL] can access it using computer directly connect to internet but those using Squid Proxy are unable to Login although the login screen appear. Is this cause by the squid.conf setting or something else?
View 1 Replies View RelatedCentOS 5 Server :: Cant Access Website - Cannot See From Any Other Machine On Net
Nov 19, 2010I have set up a 5.5 installation on a Virtual box VM. The Virtualbox (not for the VM) network preferences have DHCP Server disabled and IPV address and the network mask I believe are valid for my home network. My VM is up and running and it has gotten an IP address from my home router and everything seems fine. From any machine in my house I can ssh into my centos installation. I went ahead and started up the httpd service and the website is up. IOW, I can see it from my centos box - when I navigate to http://localhost However, I cannot see it from any other machine on the net. The IP address of the centos bos is 192.168.0.141. From the centos I can do a ttp://192.168.0.141 and see the Apache 2 test Page. I can see that from anywhere else. Although I can ssh to that machine.
View 4 Replies View RelatedUbuntu Servers :: No Access To Phpmyadmin And Website After Reboot?
Oct 15, 2010I installed ubuntuserver edition 10.10 on my old p3.Installation went fine and i installed LAMP and SSH along with it.*everyhting i do past this point is via LAN on my laptop using root account on putty or winSCP.*I installed phpmyadmin, loged in with root, duplicated the root acount and gave the duplicate any host (%) access. Next i created an account with access only to the users database (for use in my php to check username and password).Next thing i did was change the apache2 config 000-default to disable indexing.After that i changed the php.ini file to allow 6GB uploads (for movies).Rebooted... and thats where the problems start.I CANT:Acces phpmyadmin with any acount.Login on my website.I CAN:login to mysql using root.I HAVE:Checked if the mysql database and table for websitelogin still existed, they do.Checked mysql useracounts and they are still there.So something changed after the reboot, because it was working fine before i did.
View 9 Replies View RelatedUbuntu Servers :: Website Access Only / When Rootuser Is Logged In
Dec 1, 2010After a battle with Ubuntu, Django, Apache and wsgi i could reach the website i set up from another computer via ip-adress (10.37.129.6). i then restarted the server and after booting tried to access the website from outside - permission to / denied with the usual 403 error. trying to fix that, i logged in to the server and suddenly the website was available again. typed logout on the server - no access wt. 403. logged in - website can be accessed.i somehow suspect this is some strange permission problem, but i don't have a clue where to start searching. errorlogs just contain information that a / access request has been denied.
View 1 Replies View RelatedSoftware :: Making Copy Of Website With Limited Access
Jul 14, 2010Trying to make a copy of my website to a local ubuntu server - I have very limited access ie: no shell access. What is the best way to make a copy of my site. have ftp cli, lftp, wget ... just not sure what to use and how.
View 3 Replies View RelatedGeneral :: Use Ipv6 To Access Website While Only Ipv4 Is Supported In Network?
Feb 6, 2011I'm using Ubuntu Linux as my operating system.In my network only the ipv4 is suported, and I need to access some website through ipv6. How can I do it, is there a way to tunnel from the ipv4 to ipv6.
View 2 Replies View RelatedUbuntu Networking :: Error "HTTP Error 403.1 - Forbidden: Execute Access Is Denied. Internet Information Services (IIS)" Browsing To Site
May 10, 2011running Ubuntu 10.10 and mozilla and seamonkey... Tried to access a website: [URL] and got the error: The page cannot be displayed You have attempted to execute a CGI, ISAPI, or other executable program from a directory that does not allow programs to be executed. Please try the following: Contact the Web site administrator if you believe this directory should allow execute access. HTTP Error 403.1 - Forbidden: Execute access is denied. Internet Information Services (IIS)
View 1 Replies View RelatedUbuntu Networking :: Open Firefox, Some Website Works, On Some Other Website Firefox Says "Connecting To..."?
Apr 18, 2010I open Firefox, Some Website Works, on some other Website Firefox Says "Connecting to...",but all the Sites I have Tested working on my Windows 7.
View 3 Replies View RelatedSecurity :: Opening FTP Service On Public Facing Website For 3rd Party Maintenance Access
Nov 4, 2010I'd like to know if this is common security flaw or normal to open up FTP to the public which is of course protected with password for 3rd party access to maintain our public facing / production website ? If yes, what sort of FTP application to install in your Linux webserver?
View 7 Replies View RelatedUbuntu Networking :: Get The Error "windows Can Not Access \linux-laptopmovies?
Jan 9, 2011I'm trying to network a Ubuntu 10.04 laptop (192.168.0.11) with a VistaHome 64 desktop (192.168.0.10). I have full access to files from Ubuntu either connecting through Network or by Connect to Server. From Vista I can see linux-laptop under the network.I am trying to share /home/john/movies, /home/john/pictures, and /home/john/music. When I open linux-laptop I can see my shares. However when I try to access a folder lets say movies which is actually located at /home/john/movies I get the error "windows can not access \linux-laptopmovies". This stands true all shares. I think the path is defined incorrectly somewhere. To test this theory I created a file called john2 at root and shared it. I placed a nondescript .txt file in there. When I opened linux-laptop from Vista I saw among the other shares john2. When I tried to open that it allowed me and I was able to see the text file. I believe I have an incorrectly set path for shares somewhere on Ubuntu. I'm not sure if Im using samba or nfs or both. I can post smb.conf if needed.Also, sometimes Vista ask for a password. I have only 2 users on both machines with identical usernames and passwords both with admin access. Sometimes I get not allowed access error or i get users can not access more than one share at a time error.
View 5 Replies View RelatedUbuntu Networking :: Access My Site Using Firefox Get Error - Unable To Connect
Mar 27, 2011When I'm trying to access my site using Firefox I get this error: "Unable to connect
Firefox can't establish a connection to the server at mysite.com.
-The site could be temporarily unavailable or too busy. Try again in a few moments.
-If you are unable to load any pages, check your computer's network connection.
-If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web."
Then I tried to access my site using Opera and Chrome but I get the same error, that the browsers couldn't connect to it.
The site to which I'm trying to connect is definitely up. (I ask a few people and they can access it and I looked at [url] and it says that my site it's up)
Ubuntu Security :: Weird Website With A Error By Firefox?
Mar 19, 2011I went to visit a website that I frequent and firefox through a error that basically said that the internet connection might be being tampered with and that the website was not authenticated. Meaning someone might be trying to load a fake website into my browser and impersonate the website to give me viruses or something.It's a website I frequent. Also the website doesn't have the www. in the url.[URL]..
View 9 Replies View RelatedUbuntu Networking :: Install NIC Wired RC-400 - Error Comes Out - Unable To Access The Internet Or Ping Any IP Address?
May 5, 2010we are trying to install this NIC Rosewill RC-400 Chipset RTL8169S-32 in Ubuntu 9.04 we downloaded the drivers from Rosewill website (For kernel 2.4.x and 2.6.x V 3.1) but when we follow the instruction in the readme file and do make clean modules and error comes out
Code:
make -C src/ clean
make[1]: Entering directory `/home/trinity/Desktop/r8169-6.006.00/src'
rm -rf *.o *.ko *~ core* .dep* .*.d .*.cmd *.mod.c *.a *.s .*.flags .tmp_versions Module.symvers Modules.symvers rset[code]...
So I went do realteak downloaded latest available drivers that seems to be were release yesterday did same command and same error So I made only make and it went fine did then make clean modules and went fine so made make install, depmod -a and modprobe r8169 verify int was up and getting correct ip from router but I'm not able to access the internet or ping any IP address
Code:
xxx@xxx-desktop:~$ uname -a
Linux xxx-desktop 2.6.28-18-generic #60-Ubuntu SMP Fri Mar 12 04:40:52 UTC 2010 i686 GNU/Linux
xxx@xxx-desktop:~$
Ubuntu One :: Website Error Messages When Adding Machine. No Icon Either?
Mar 15, 2010What happened to the cloud icon. Also using sys>prefs>ubuntuone takes me to the login page. It offers to add the machine but then this page pops up with these errors.
View 5 Replies View RelatedUbuntu :: Auction Arms Website - Program Error Coding
Apr 16, 2011Can I get someone that is using Ubuntu/Lucid and Firefox as browser to run a test for me? Can you go to this website and then type the either the word "HIGH" or the word "LOW" in the search box and then tell me if you get the same bunch of program error codings that I get when I try this ? Want to see if this is a problem with just my computer setup or with the websites programming. [URL].
View 2 Replies View Related