Ubuntu Servers :: Website Access Only / When Rootuser Is Logged In

Dec 1, 2010

After a battle with Ubuntu, Django, Apache and wsgi i could reach the website i set up from another computer via ip-adress (10.37.129.6). i then restarted the server and after booting tried to access the website from outside - permission to / denied with the usual 403 error. trying to fix that, i logged in to the server and suddenly the website was available again. typed logout on the server - no access wt. 403. logged in - website can be accessed.i somehow suspect this is some strange permission problem, but i don't have a clue where to start searching. errorlogs just contain information that a / access request has been denied.

View 1 Replies


ADVERTISEMENT

Fedora Servers :: Script Can't Access Mounted Location While Logged Out

Feb 24, 2011

I want to backup some data on my Fedora box to a external Hard Disk (USB). I mounted the external HD on my box. I wrote a bash script to do that and I scheduled a cronjob to execute the script. When I am online the script executes as planned. However when I am logged out the copy does not work. I also tested this with a cifs mount (via fstab) and that does not work either. I set the script to generate some output at the end and that is OK so the script does run when I am offline. I suppose the mounted locations are not reachable while logged out, is that correct? Is there a workaround so I can reach the mounted locations while logged out?

View 2 Replies View Related

Ubuntu Servers :: Can't Access Website Over Internet

Oct 8, 2010

I have ubuntu 10.04 running LAMP and proftpd, I can access over LAN but not when I type my domain name in. I have forwarded all necessary port to to the local ip of that box, added rules to ufw to allow traffic on those specific ports. I use dyndns for a second level domain and have used all their tools to check whether the ports are open and have the results I am looking for.

View 7 Replies View Related

Ubuntu Servers :: No Access To Phpmyadmin And Website After Reboot?

Oct 15, 2010

I installed ubuntuserver edition 10.10 on my old p3.Installation went fine and i installed LAMP and SSH along with it.*everyhting i do past this point is via LAN on my laptop using root account on putty or winSCP.*I installed phpmyadmin, loged in with root, duplicated the root acount and gave the duplicate any host (%) access. Next i created an account with access only to the users database (for use in my php to check username and password).Next thing i did was change the apache2 config 000-default to disable indexing.After that i changed the php.ini file to allow 6GB uploads (for movies).Rebooted... and thats where the problems start.I CANT:Acces phpmyadmin with any acount.Login on my website.I CAN:login to mysql using root.I HAVE:Checked if the mysql database and table for websitelogin still existed, they do.Checked mysql useracounts and they are still there.So something changed after the reboot, because it was working fine before i did.

View 9 Replies View Related

Ubuntu :: Getting Rootuser Terminal Symbol Differentiation?

Mar 31, 2010

I ve installed ubuntu 9.10. Am doing my project. I need to be the root user for doing my project. I use Command "sudo" for being the root user and password is the normal user password.I need to execute the commands as rootuser. when i am the normal user, "$" is the terminal symbol and when i use sudo and become root user ,even then the symbol is $.is that right? Its perfectly fine for some commands.But i need to have a different represention when i am root user??? How do i make it happen? I would also want to know if super user and root user are one and the same?

View 2 Replies View Related

Ubuntu Servers :: No Servers Work Unless Logged In?

Feb 5, 2011

I have the system setup and working, but I want to put it in a corner and forget about it. Problem is, nothing starts running unless I'm logged in. And if I log out, everything stops again.It's running a LAMP server and has VNC and SSH servers as well. I want all of that to start without having to log in. That way I can remote reboot without worries and connect and login with either VNC or SSH.Everything seems to have an entry in /etc/init.dIs the way it's acting normal behavior? It's a fresh install, then I installed everything I needed from the repos.

View 7 Replies View Related

General :: Ubuntu 10.04 - Access VNC On A Server Without Having Been Logged In To The Machine First?

Sep 4, 2010

Possible Duplicate: Automatically start VNC server on startup I have a Linux server at home, and by default no-one is logged in to that box. I'd like to establish a remote desktop connection to it with VNC but this fails, unless I log in first physically. It's strange to me that VNC Viewer doesn't even ask for credentials, it just displays a "connection refused" error message. What's the best way to do this? I'm running Ubuntu 10.04 on the server.

View 3 Replies View Related

Ubuntu Servers :: Use F12 To Execute Script Even When Not Logged On

May 28, 2010

how to bind a script to a F key (F12) that will run as root even when not logged in. I have a headless server on client premises where it'd be easier for them to press F12 to run this script that will be rarely needed than to give them SSH instructions etc. I know this must be do-able, but I can't get my Google-fu on for this question. The only way that I can possibly think of doing it is to touch a file whenever that key is pressed and have the script idly checking for that file every few seconds in a loop.

View 2 Replies View Related

Ubuntu Servers :: Ssh Logged Port In Auth.log Is Different Than 22

Oct 22, 2010

As far as I understand ssh runs on port 22 but in my /var/log/auth.log I see

Quote:

why is this logged 48504 different than ssh port 22?

View 2 Replies View Related

Ubuntu Servers :: FTP Not Responsive Unless Server Logged In?

Feb 1, 2011

I'm a total Linux noob, but I've needed a working development server for a while so I've put together an old celeron box running Ubuntu Server 10.10.The box runs fine, as does the Apache and MySQL servers, even if they did take a little while to fine tune!The problem I have is that vsftpd doesn't respond unless I'm logged on locally or via putty. As long as a local user is logged in, it's fine. If I try to connect when noone is logged in, then the connection times out waiting for the server message, and thereafter I have to login and stop / restart the vsftpd to make it work again.I'm not sure if the vsftpd is set to run on boot or on login and I have no idea how to check. Vsftpd is set to allow only local users, of which there is only one - so I can't check if it would work with any user logged in

View 3 Replies View Related

Ubuntu :: Home Network - Media Drives Are Automatically Mounted To Allow Access If The Admin User Is Not Logged In?

Jul 9, 2010

This is the set up I have: PC downstairs by a tv, with 3TB of storage containing my media, connected to the tv too. HTPC upstairs by another tv and connected to it. A few laptops and other desktops around the house which are windows based

I want the downstairs pc to act as a file server and to run my torrent client, it is running Ubuntu desktop version and has xbmc installed too for use with the tv. The upstairs htpc has xbmc live on and will access the media from the file server. What I am looking to do is to be able to log into my ubuntu machine remotely from a laptop running windows so I can manage the files and add torrents for download etc, but for this to be a complete remote session, rather than taking control over what is already being shown on the downstairs pc, like VNC does in windows.

I have two user accounts set up on the main ubuntu machine, the admin account and a media user account which is set to go straight to xbmc after log in. Also how can I make sure that the media drives are automatically mounted to allow access if the admin user is not logged in?

View 9 Replies View Related

Ubuntu Servers :: Actual IP Not Logged When Requests Come Forwarded By Reverse Proxy

Feb 18, 2011

the apche2.conf and vhost file I gave the link are the machine on LAN when site is actually hosted.When some one from internet access the site then I expect a log of IP in access.log instead of which I see the IP of machine which is working as Reverse Proxy server for all such requests.What mistake did I do above.

View 4 Replies View Related

Ubuntu :: Find Out When A User Last Logged In And Last Logged Out?

Jul 12, 2010

How can I (as admin) find out when a certain user e.g. "karl" most recently logged in and most recently logged out of a system?

View 2 Replies View Related

Ubuntu :: Painfully Slow Access To Particular Website

Sep 1, 2011

I'm having difficulty accessing http://egrants.ed.state.pa.us/v2/default.asp while using Ubuntu 11.04 and Ubuntu 10.04.I've tried chrome, firefox and opera as well as three different ISPs. My Windows machines don't seem to have this problem.

A little background:My agency has several offices, some with different ISPs, but with essentially the same setup: ISP router/modem --> Ubuntu Server with Squid/Dansguardian --> Switches, etc.When we first started encountering this problem I thought I had to have had something going on with Squid/IP Tables or something of that sort. I connect my laptop (running Ubuntu 11.04) directly the ISPs modem/router and have the same slowness. I figure that maybe the site is having problems. I ask the other tech in my office to try it out (he's running Windows 7) and he has no slowness with the site when connected directly to the ISPs modem/router.For the time being I've circumvented the filter box for the Windows users who need access to this site, but I'm not certain that's the best solution.I contacted the site's tech support several times and just gotten a "we'll call you back".Any suggestions on things I can check/change with my setup to get this working?

View 9 Replies View Related

Fedora :: Why Cannot Access Website?

Sep 9, 2010

Using Fedora 13,The Website shows well in Local host, but no able to access it from any other host.I get the error message " The server at xxx.xxx.xxx.xxx is taking too long to respond".

View 13 Replies View Related

General :: Can't Access Some Website

Jun 17, 2010

i'm using fedora 9 and mozilla 3 with dsl internet connection. i can't access some site in my computer but other computers can using internet explorer. i hope this is the right forum for this.

View 8 Replies View Related

Fedora X86/64bit :: Can't Access Website

Oct 12, 2010

Our setup is 64bit F13, Firefox/NoScript, KDE, when trying to access www.nook.com we get a long pause followed by "server not found" message. We can change to another hard drive and boot WinXP/Firefox/NoScript and we a get a redirect to:http://www.barnesandnoble.com/nook/i...refront-_-nook

You can see thread about it here also:http://www.linuxquestions.org/questi...-linux-835160/

View 8 Replies View Related

General :: Unable To Access Website

Sep 29, 2010

I just bought the Barnes & Noble Nook eReader for my wife's birthday and a requirement is to log on to the Nook website and establish an account. Using her Fedora 13 64bit desktop and Firefox she repeatedly tried to access the website www.nook.com to create an account, however consistently got the server not found message. Even using the Firefox addon User Agent Switcher and turning off NoScript did not correct this.

When we switched over to the WinXP install and Firefox we were able to access the website no problem. Anyone else unable to access that website via linux?

View 14 Replies View Related

General :: Apache Website Access

Dec 26, 2010

I have web server apache on linux Centos. I can access it successfully by typing on the address bar http://localhost, 127.0.0.1 or 192.168.0.150 from the local computer server and the site loads normally with graphic. When I access the site from another computer in the same local network, I don't get the correct website. I see the site like html as text not graphic. Please see below text file output from the browser: Also I can only access the site by typing 192.168.0.150 IP address in the address bar. When I type http://localhost or 127.0.0.1, the site does not come up. Do you see what I did wrong? How can I fix this problem.

View 7 Replies View Related

General :: Block Access To A Website On Lucid?

Sep 1, 2010

I am trying to block a few websites on a lucid lynx, I tried editing /etc/hosts and that blocks access via url but the site still open if I enter the ip on the browser, how can I block ip access also? (without using any extra software besides what linux 10.04 have by default)

View 1 Replies View Related

Debian :: Give Access To Website In /etc/host?

Apr 13, 2010

I want to give some web address to host file and except these web address no website will open. For example I give permission for [URL] and [URL]. The user just enter these 2 website. Other websites will be blocked.

View 6 Replies View Related

Networking :: Can't Access RH Enterprise Server 6 Website

Apr 4, 2011

I set up an apache webserver on a redhat enterprise server 6 last week. It works fine on the localhost. However, the webpage can't be accessed from the other computer. I didn't modify anything related to 'allow,deny' in httpd.conf. The only thing I've done is I added a rule in iptables to approve the access from a computer with a specific IP address. Since I am quite new to iptables, I don't know if there is anything wrong with my setting.

Even I stop iptables, the problem is still there. I don't know if my setting of iptables is correct. Or, there is anything else that I should do?

View 7 Replies View Related

General :: Restricting Users To Access A Certain Website?

Apr 22, 2010

I have an internet and mail server installed CentOS, and I want to restrict client machines to access a certain website, e.g. if i want restrict users from accessing the website: www.mydomain.com, How do I do it?

View 6 Replies View Related

Server :: Website Cannot Access Using Squid Proxy

Feb 1, 2010

My company is using Squid Proxy 2.6 for internet connection. Recently we implement a Webmail system. This is the link [URL] can access it using computer directly connect to internet but those using Squid Proxy are unable to Login although the login screen appear. Is this cause by the squid.conf setting or something else?

View 1 Replies View Related

CentOS 5 Server :: Cant Access Website - Cannot See From Any Other Machine On Net

Nov 19, 2010

I have set up a 5.5 installation on a Virtual box VM. The Virtualbox (not for the VM) network preferences have DHCP Server disabled and IPV address and the network mask I believe are valid for my home network. My VM is up and running and it has gotten an IP address from my home router and everything seems fine. From any machine in my house I can ssh into my centos installation. I went ahead and started up the httpd service and the website is up. IOW, I can see it from my centos box - when I navigate to http://localhost However, I cannot see it from any other machine on the net. The IP address of the centos bos is 192.168.0.141. From the centos I can do a ttp://192.168.0.141 and see the Apache 2 test Page. I can see that from anywhere else. Although I can ssh to that machine.

View 4 Replies View Related

Ubuntu Servers :: How To Get Website Available On LAN And Internet

Feb 12, 2010

I am running ubuntu server in a virtual environment (vmware) and have setup apache and got mediawiki up and running which I can access on host machine by going to 172.16.170.130. But this is only available on my host machine and not elsewhere on the network. How do I make it available to others on LAN and eventually on the internet (associated with my host IP address?)

View 3 Replies View Related

Ubuntu Servers :: Run Ssh Commands Though PHP On Website?

Nov 2, 2010

I'm trying to run ssh commands though PHP on my website. I found this tutorial for it: [URL] I've got a few problems here, when I do "apt-get install openssl-dev" I get this output:

Code:
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package openssl-dev

[Code].....

View 7 Replies View Related

Ubuntu Servers :: Website Only Works When SSH?

Jun 15, 2011

My ISP provided me with a static IP and I went and bought a domain name with godaddy.com. The issue I'm having now is that I am getting a 403 forbidden error (You don't have permission to access / on this server). The strange part is that when I ssh into my server, and try to go to my website, everything works fine

View 5 Replies View Related

Ubuntu Servers :: Website Won't Work?

Jul 30, 2011

I was with hostgator before that provided cPanel and i "believe" they used CentOS.Now that i have moved to a different host, unmanaged, i installed copy of ubuntu 10.04 LTS 32 bit.the website is www.terwax.com.I have to put files under /var/www. So i put all the files there, including index.html (a file of joomla), but if you see the website yourself, it shows up blank page with some weird stuf

View 9 Replies View Related

Networking :: Can't Access Website Gives Error 2082 2095

Feb 3, 2010

can't access website gives error 2082 2095

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved