General :: Apache Website Access
Dec 26, 2010
I have web server apache on linux Centos. I can access it successfully by typing on the address bar http://localhost, 127.0.0.1 or 192.168.0.150 from the local computer server and the site loads normally with graphic. When I access the site from another computer in the same local network, I don't get the correct website. I see the site like html as text not graphic. Please see below text file output from the browser: Also I can only access the site by typing 192.168.0.150 IP address in the address bar. When I type http://localhost or 127.0.0.1, the site does not come up. Do you see what I did wrong? How can I fix this problem.
View 7 Replies
ADVERTISEMENT
Jan 22, 2010
I have a LAMP server configured. Yesterday, I had a test.php file displaying everything fine. I transferred some files over to the new server and now I can't connect to the test page, webmin, or phpmyadmin. I think it has something to do with Apache but Im not sure what to do next. I have restarted Apache, MySql and all services are running.
View 3 Replies
View Related
Jul 17, 2011
Where would I go to find a guide on a how-to for Linux website administration? I want to learn how to create a simple site dedicated to my blog. I already have a blog hosted by wordpress. I want to learn how to administrate my own blog using Apache hosted by GoDaddy.com or some other host.
View 2 Replies
View Related
Jun 17, 2010
i'm using fedora 9 and mozilla 3 with dsl internet connection. i can't access some site in my computer but other computers can using internet explorer. i hope this is the right forum for this.
View 8 Replies
View Related
Sep 29, 2010
I just bought the Barnes & Noble Nook eReader for my wife's birthday and a requirement is to log on to the Nook website and establish an account. Using her Fedora 13 64bit desktop and Firefox she repeatedly tried to access the website www.nook.com to create an account, however consistently got the server not found message. Even using the Firefox addon User Agent Switcher and turning off NoScript did not correct this.
When we switched over to the WinXP install and Firefox we were able to access the website no problem. Anyone else unable to access that website via linux?
View 14 Replies
View Related
Sep 1, 2010
I am trying to block a few websites on a lucid lynx, I tried editing /etc/hosts and that blocks access via url but the site still open if I enter the ip on the browser, how can I block ip access also? (without using any extra software besides what linux 10.04 have by default)
View 1 Replies
View Related
Apr 22, 2010
I have an internet and mail server installed CentOS, and I want to restrict client machines to access a certain website, e.g. if i want restrict users from accessing the website: www.mydomain.com, How do I do it?
View 6 Replies
View Related
Feb 6, 2011
I'm using Ubuntu Linux as my operating system.In my network only the ipv4 is suported, and I need to access some website through ipv6. How can I do it, is there a way to tunnel from the ipv4 to ipv6.
View 2 Replies
View Related
Feb 17, 2011
I'm running Ubuntu 10.04 with apache, rails, mysql, etc. My rails site is running at www.example.com. I'm intending to use named-based virtual hosting and I have a virtual hosts file configured/enabled for www.example.com. My site is hosted on Amazon EC2.
The problem is that if I set up a new DNS record -- say test.example.com -- and browse to that, my site www.example.com is served up! That's without configuring any new virtual hosts. And the same is true if I go to my DNS records and define test2.example.com, etc. Without touching my server, these new URLs serve up my website. That's not what I want! I want to use name-based virtual hosting and host different sites for each subdomain.
[Code]...
UPDATE: now I understand a bit more... apparently my real problem is not what I thought it was. My real problem now appears to be that when I copy this virtual hosts file and edit it to add a new subdomain name, set up the corresponding site, etc., and enable the virtual host (a2ensite) and restart (graceful), apache immediately stops serving up any websites. Apparently apache crashes although I do not see any error messages. But all my sites go down and I have to revert and then restart apache.
I thought this was because my virtual host file (pasted above) had an error. So I thought I would start by getting that first file right. Apparently it is right. So now I need to understand why adding a second virtual host causes all sites to stop being served up.
View 1 Replies
View Related
Apr 14, 2011
I am very new to using Linux. I am trying to configure Apache. I have located the default in /etc/httpd and did a yum install httpd. Now, with this done, I am lost as is to how to configure. I am trying to make an ssl website with apache.
View 3 Replies
View Related
Feb 7, 2010
Apache wont picup my website when i dropped my Site folder in the /var/www/html directory even after starting the Apache service.
View 2 Replies
View Related
Apr 29, 2010
I was asked to take over maintenance for a web-site written in .asp. Can Appache handle it installed on linux, as a local test-server?
View 2 Replies
View Related
Feb 27, 2010
Doing my final year project in linux- a Mozilla Firefox extension which providing chat option for two or more peoples,who happen to be browsing the same website simultaneously. It shows you other people who visit the same websites as you are. These people have to be registered with our software. I don't know how to go about this. After a lot of googling and enquiring i have divided the project into three modules: an extension at browser side, chat implementation (probably in ajax) and a server- apache-php-mysql.
The extension keeps track of the URLs visited by the browser. It sends this information to the server. When it receives information from the server, the extension displays the number of users visiting the URL as the user. The extension informs the server whenever the user clicks the EnableChat(which will be embedded in a toolbar in the browser) button to start a chat session. After receiving the information, the extension displays the users in that site. The user clicks on a particular username for chat.
I have installed php mysql and apache. but i do not know exactly what the server must do. I know i have to write the server code in php and put it in the /var/www folder. but what should that code do? how exactly does the extension or browser communicate with the server for the exchange of above info?
View 4 Replies
View Related
Apr 11, 2011
I was able to install and setup Apache on my mint box. I created the site and it was visible to me using the localhost and home address. My instructor tried to view it from his machine and it timed out. I tried to view it from an unused Windows box in the classroom and it was unreachable.The instructor could not figure out why this was happening. The class is using about 4 different distros. There are only 2 of us using Mint and the other guy was not in class. We usually help each other outMost of the class had no problem when the instructor went to view their pages. Some had firewalls issues that were easily remedied. He was stumped when it came to my issue.So what may be going on here? Are there some specific things that need to be done with Apache on a Mint distro that I'm missing? Ubuntu, Opensuse, and Fedora all almost worked without tinkering around
View 6 Replies
View Related
Nov 9, 2010
I have a Name-based virtualhost website in Apache, what i want to do is to disable direct ip access to the site and allow only through web address (www.mysite.com, and not through xxx.xxx.xxx.xxx). Or at least show a default page / not found page
I presume this can be acomplished with Mod_Rewrite and .htaccess but i just wanted to know if there is a more global option for this
I have googled this a lot but i can only find posts related to ip host restriction rules, which is not what i want
View 3 Replies
View Related
Jan 10, 2010
I have Ubuntu 9.1 setup, with ISPCONFIG3, squirrel mail, apache2, mysql, phpmyadmin, phpbb3 so now what, what do I need to do next to setup to get apache to display my website and where do I need to put my web files?
View 1 Replies
View Related
Nov 27, 2010
In my website, I'm putting shared files in a "/global" folder. Both "styles.css" and "library.php" are in this global folder. HTML code seems to be working ok - the following bit works great to pick up a style sheet:
Code:
<link rel="stylesheet" type="text/css" href="/global/styles.css" /> However PHP does not seem to understand my root directory. Using the following does not work:
Code:
include_once("/global/library.php");
I receive a "failed to open stream: No such file or directory" error.Spelling out the entire full path works, like so:
Code:
include_once("/srv/www/mysite/global/library.php");
But this type of code is no good as I may change servers in the future. I have my "DocumentRoot" set correctly in my sites-available file. It seems as if PHP is ignoring it. Is there a config file someplace (htaccess? Local php.ini?) where I should update my root directory for this site only? Or am I following bad form and there's a better way to do this? Relative paths don't seem like the answer here though...
View 5 Replies
View Related
Feb 1, 2011
I've installed Ubuntu server and got everything setup pretty well.My problem is apache.I put my website in /var/www and changed the security on the files to allow them to be executed by other, which is what I finally discovered was my first problem (access denied). But now whenever.I go in and edit my page, the changes aren't reflected on the site unless I completely restart apache.I know I'm doing something wrong because I used to pay for a host and every time I edited a page, it was instantly updated on the site. Could one of you gurus tell me where I screwed up?
View 4 Replies
View Related
Nov 20, 2009
I am getting this error whenever I access the page:
Code:
PHP Warning: fgets(): supplied argument is not a valid stream resource
Any idea whats all about?
I explored and found it permission issue.
I want to put a user call paul in apache group.Any idea how can I do that?
View 6 Replies
View Related
Oct 18, 2009
I have been following the steps mentioned at [URL] Now I want to add authentication through .htaccess.
View 1 Replies
View Related
Aug 11, 2011
I am running a syslogd on my ubuntu 10.10 system. I have a apache2 server on the same machine. I have configured my apache2.conf file to send the error logs to the local syslog server.
The config is as under :-
LogLevel notice
ErrorLog syslog:local1
I have also configured the /etc/syslog.conf as under :-
local1.info /var/log/apache2/error_logs
I have created a file in the /var/log/apache2 dir with the ownerships and permissions as under:-
-rwxrwxrwx 1 syslog adm 77 2011-08-11 18:14 /var/log/apache2/error_logs
Next I restarted the sysklogd and apache2 servers with a service command as under:-
sudo service sysklogd restart
sudo service apache2 restart
I thereafter observed the /var/log/apache2/error_logs file and found the entries for apache2 closing down and coming up as under:-
Aug 11 18:14:14 cc apache2[4940]: [notice] caught SIGTERM, shutting down
Aug 11 18:14:19 cc apache2[5282]: [notice] ModSecurity for Apache/2.5.12 [URL] configured.
Aug 11 18:14:19 cc apache2[5282]: [notice] Original server signature: Apache/2.2.16 (Ubuntu) mod_ssl/2.2.16 OpenSSL/0.9.8o
Aug 11 18:14:20 cc apache2[5285]: [notice] Apache/2.2.16 (Ubuntu) mod_ssl/2.2.16 OpenSSL/0.9.8o Microsoft-IIS/5.0 configured -- resuming normal operations
Now the problem is I donot get any other messages thereafter. So it is hardly useful. How can I increase the logged messages from apache. I tried the facility:
local1.*
Then restarted the sysklogd and apache2, but the contents of the /var/log/error_logs file remained similar. Next, I followed the link. I created the perl script for recording access logs of apache2. I then restarted the apache2 and sysklogd. when I opened my website from a browser, the access log did not work. I think I am getting something wrong with the facility value , in apache2.conf it is ErrorLog syslog:local1 ! but the script is suggesting that it should be local2 in the line 4
openlog('apache','cons','pid','local2');
I therefore changed the script to local1 in above line. But still no access log?
View 2 Replies
View Related
Apr 18, 2011
we have a dual server setup: Windows server 2003 and Ubuntu 10.04 with apache installed with all the goodies. This is all virtualized. What I'm wanting to do, is make the new website we've created run on the Ubuntu machine, which it is, and be accessible outside the office. However, by doing this, we forfeit being able to use remote access or web exchange on Windows server 2003.
How can I create a link from the new website on Apache point to the internal server and it work outside of the office?
View 7 Replies
View Related
Jan 11, 2011
I am trying to host a local website(an wiki application) within a network. Is it necessary that all the files I need to upload should be in the var/www?
View 8 Replies
View Related
Oct 7, 2010
I have a server with a couple of sites on it. Some of them have a webform where people can send them emails that they are interested in their work etc. though the "To:" and "From:" adress can't be change by the enduser, you can only enter text and press send. However it seems that someone (not on the server) has found a hole/exploit to use those webforms to send mails to who ever he wants.. I have the webserver setup with ssmtp (simple smtp) and it just forwards the mail sent from the server to my mail-server and there on it sends it out on the internet. If I check my log on the mail-server I can see the whole smtp session, where it's comming from and where it's going etc. I see that it comes from my webserver and over there I only have these log entries:
Oct 6 22:04:47 ettan2 sSMTP[1771]: Sent mail for itaumail@itau.com.br (221 2.0.0 Bye) uid=204 username=torget outbytes=3290
There are loads of those log entries, mostly at after office-hours between 17:00 and 7:00 I have scanned through all the Apache logs and can't find Anything that point to the e-mail addresses used or something like that. The reason I found this out was because he tries to send to a host that doesn't allow connection on port 25 so all the mails got stuck in the queue, over 1000 atm.. I'm using Apache 2.2 and Postfix 2.6 on a Debian Lenny install. What can I do to find out how he's doing this and close the "exploit"? Who would you recommend to setup the mail() thing in PHP for most security?
View 6 Replies
View Related
Jul 21, 2009
I was unable to access my dedicated server for few minutes. I have checked the apache error logs and found below notice:
[notice] caught SIGTERM, shutting down
I have tried to search from Google but could not find much information about this error.
View 2 Replies
View Related
Apr 23, 2011
There are some log files that I wish to get some information from (Apache Access Log) but it is huge! All I need as of right now is any information from date and time A to date and time B. What commands can I use to extract this information from the access_log and put it into another file with just that information? I created a file called "access_info" by doing
Code:
touch access_info
but I was not sure where to go from there.
View 13 Replies
View Related
Nov 8, 2010
In first place i am sorry about my horrible English. I want to make a web site with a virtual host of apache visible by all the computers connected to my networking. I put this in the end of the file "/etc/httpd/conf/httpd.conf"("192.168.1.194" is the IP address of my computer. The default gateway IP address is "192.168.1.1"):
[Code]...
It works if i go to "http://192.168.1.194/" with the browser of the computer with apache inside, but on the others PC of my networking this method don't work!
View 2 Replies
View Related
Mar 6, 2011
I currently have an Apache Web Server running on Ubuntu 10.4 and I use a DynDNS service to make them accessible to the outside world via a domain and/or subdomain.
My configs currently look like this:
<VirtualHost *:80>
ServerAdmin <obscured>@<obscured>.com
ServerName <subdomain>.<obscured>.com
ServerAlias <subdomain>
[Code].....
This works fine from access outside of the network and all subdomains resolve to the correct directory.
The problem I am having is with accessing a subdomain over my internal network.
I can access the Web Server using the server's IP address: http://192.168.1.123/ but this always takes me to the same virtual host and I don't know how to distinguish between different virtual hosts (different subdomains).
Ideally I would like to access the same subdomains using http://<subdomain>/ where <subdomain> is the same as the subdomain attached to the external domain name.
View 2 Replies
View Related
Jan 17, 2011
Based on some web reference, apache access log file size increased more than 2Gb. It will effect apache performances. Is this correct?
View 4 Replies
View Related
Jan 29, 2011
I am running opensuse with LAMP, and this is my first time setting up this type of server (usually am a windows junkie) My problem i am having is that I am unable to view my website from outside the local network. I have setup my router for a dynamic dns and forwarded all the ports through the router and the local firewall. I ran the apache setup through YAST2 and everything seems fine locally but when i attempt to access it elsewhere its not connecting. computechsolutions.dyndns.biz is the dynamic dns address i have setup through my router.
View 2 Replies
View Related
