Ubuntu Networking :: Error "HTTP Error 403.1 - Forbidden: Execute Access Is Denied. Internet Information Services (IIS)" Browsing To Site
May 10, 2011
running Ubuntu 10.10 and mozilla and seamonkey... Tried to access a website: [URL] and got the error: The page cannot be displayed You have attempted to execute a CGI, ISAPI, or other executable program from a directory that does not allow programs to be executed. Please try the following: Contact the Web site administrator if you believe this directory should allow execute access. HTTP Error 403.1 - Forbidden: Execute access is denied. Internet Information Services (IIS)
View 1 Replies
ADVERTISEMENT
Jun 21, 2011
I have a web application that runs on PHP and MySQL on opensuse 11.4 (web server) and opensuse 11.1 (database server).The web application uses a .htaccess file that causes my site to error with error "403 forbidden". If I add "+FollowSymLinks" at the top, it loads the application just fine.But problem is that I have an issue with the application, and they believe that my .htaccess file is at fault since it's custom. I hightly doubt it but wanted to eliminate that as a concern.
View 1 Replies
View Related
Mar 27, 2011
When I'm trying to access my site using Firefox I get this error: "Unable to connect
Firefox can't establish a connection to the server at mysite.com.
-The site could be temporarily unavailable or too busy. Try again in a few moments.
-If you are unable to load any pages, check your computer's network connection.
-If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web."
Then I tried to access my site using Opera and Chrome but I get the same error, that the browsers couldn't connect to it.
The site to which I'm trying to connect is definitely up. (I ask a few people and they can access it and I looked at [url] and it says that my site it's up)
View 3 Replies
View Related
Feb 9, 2010
Have no idea what I am doing operating a server. Our programmer got a new job and I am the one who has to take it over. Everything was fine til yesterday. You see I made a control panel to easier update the site www(dot)discoverysound(dot)com
but yesterday when I went to update the site I got an error called fopen. I thought I fixed it (and boy did I ever) but now I cannot get to my site because it says Forbidden You don't have permission to access / on this server. Apache/2.0.47 (Unix) mod_ssl/2.0.47 OpenSSL/0.9.7a DAV/2 PHP/4.3.3RC4-dev Server at www(dot)discoverysound(dot)comPort 80.
View 2 Replies
View Related
Jul 22, 2011
I am trying to browse in /var/www/directory and it giving me a following error. Forbidden You don't have permission to access /directory/ on this server. Apache/2.2.14 (Ubuntu)Server at localhost Port 80 I have just copied that directory to /var/www. What might be wrong.
View 14 Replies
View Related
Feb 10, 2011
installation moodle on Ubuntu 10.04.1 LTS.at localhost show message It works!at localhost/moodle show message Forbidden You don't have permission to access /moodle on this server.
View 1 Replies
View Related
Aug 11, 2009
I want to install Codendi softwr to my Centos 5.3.But can not execute the installation script gives an error permission denied./etc/fstab file does not contain a path that holds my CDROM drive.
View 2 Replies
View Related
Jan 20, 2010
I have the following message with apache:
Quote:
Forbidden
You don't have permission to access /site/home.html on this server.Apache/2.2.12 (Ubuntu) Server at localhost Port 80
home.html isn't in /var/www but in my /home/myname/site/ How can visualize my site in my local directory?
View 1 Replies
View Related
Oct 29, 2010
How can I block access to a certain internet site using ufw? Let's say I want to block access to www.xxx.zzz (IP 1.2.3.4) to any program and user; using iptables I can do
sudo iptables -A OUTPUT -d 1.2.3.4 -j DROP how can I do that using ufw? if ufw can not do this, where should I put this rule to persist it over reboot, without interfering with ufw chains infrastructure?
View 5 Replies
View Related
Jan 14, 2010
I can SSH into my RHEL box, but get an "Access denied" error :-
Quote:
login as: root
Access denied
root 192.168.0.10's password:
Last login:.....
#
So, I can SSH in, but it always prints the Access denied!?
View 5 Replies
View Related
Oct 5, 2010
I am trying to install Jinzero a media server on my ubuntu server.
I already had apache2 installed and have installed php5 etc.
When I try to access index.php I get an http error 500 and when I check the logs of my apache2 it shows:
PHP Code:
View 1 Replies
View Related
Mar 13, 2009
I have two folders as :
drwxrwxrwx 2 root root 1368064 Mar 10 18:28 monitor
drwxrwxrwx 7 root root 12288 Feb 18 17:07 monitorDONE
I have created one short cut link for this folder with below command :
ln -s monitorDONE recordings lrwxrwxrwx 1 root root 11 Mar 13 14:30 recordings -> monitorDONE This link is under /var/www/html Now, when I do IP/recordings It show me an Error as Forbidden You don't have permission to access /recordings on this server.
View 19 Replies
View Related
Dec 17, 2010
I have not done the SMTP debug yet but just from basic troubleshooting, I think I know what the problem is. My mail server is rejecting my web server from sending mail due to 'relay access denied':
Code:
root@www:# telnet mail.domain.tld 25
Trying 211.113.101.135...
Connected to mail.domain.tld.
Escape character is '^]'.
[Code]....
View 5 Replies
View Related
Sep 14, 2010
I cannot install files from source (tar.bz, tar.bz2, tar.gz, etc) my latest attempt began at tuxfiles. following the 'tutorial', if you will, I managed to unpack the files; but when it came to the ./configure step, I got the following error:
zsh: no such file or directory: ./configure
Here I figured different distros, slight variances, so instead I tried putting a space in the command (./ configure), and got this error.
zsh: permission denied: ./
So finally I tried both ./configure and ./ configure as su and I still got the same errors... this is the same problem that I've always had when installing from source. I am using Fedora 12.
View 6 Replies
View Related
May 5, 2010
we are trying to install this NIC Rosewill RC-400 Chipset RTL8169S-32 in Ubuntu 9.04 we downloaded the drivers from Rosewill website (For kernel 2.4.x and 2.6.x V 3.1) but when we follow the instruction in the readme file and do make clean modules and error comes out
Code:
make -C src/ clean
make[1]: Entering directory `/home/trinity/Desktop/r8169-6.006.00/src'
rm -rf *.o *.ko *~ core* .dep* .*.d .*.cmd *.mod.c *.a *.s .*.flags .tmp_versions Module.symvers Modules.symvers rset[code]...
So I went do realteak downloaded latest available drivers that seems to be were release yesterday did same command and same error So I made only make and it went fine did then make clean modules and went fine so made make install, depmod -a and modprobe r8169 verify int was up and getting correct ip from router but I'm not able to access the internet or ping any IP address
Code:
xxx@xxx-desktop:~$ uname -a
Linux xxx-desktop 2.6.28-18-generic #60-Ubuntu SMP Fri Mar 12 04:40:52 UTC 2010 i686 GNU/Linux
xxx@xxx-desktop:~$
View 9 Replies
View Related
Mar 25, 2011
I am having difficulties with Pure-FTPD. I had it working at one time. I recently had to reinstall Ubuntu 10.10 because pure-ftpd stopped working for some reason and now I have a fresh install but pure-ftpd still does not work. This is what I did to install it.
Sudo apt-get install pure-ftpd
Using the Ubuntu Spftware Center I installed PureAdmin. I then create a virtual user. Then in the terminal entered the following:
[code]...
I read somewhere that this could be a filezilla issue and to fix it I need to use active mode and use the filezilla external address [URL]... Of course I did this and the filezilla solution did not work this time. I am fairly sure it is a server issue this time.
View 2 Replies
View Related
Sep 20, 2010
I just built an AMD Phenom II Six Core with 4 Gigs Ram a 160Gib / and swap, and (2) Two Tb mirror for Raid (data storage) I had been using DMRAID in the deprecated box but this box has MDADM v3.1.4 - 31st August 2010 from source (on MDADM wikipedia).
I have no permission problems with using the raid and dmraid is un-installed. The raid is working perfectly and is mounted in my fstab with ext4 defaults 0 2 as my options.
I have two exports
/media/raid/Test
/test
Both show IP and subnet on the showmount -e for the server. I can mount the test just fine on the server. I cannot, however, mount the /media/raid/Test error: mount.nfs: access denied by server while mounting hostname:/media/raid/Test Using dmraid I am able to have the deprecated box export and mount nfs shares from the raid but using MDADM on the new computer, I cannot. I get similar results with pointing MYSQL's data folder to a location on the "/media/raid/Database" (even with apparmor entries).
View 1 Replies
View Related
Oct 10, 2010
I mount a partition to a directory and ls -liah tells me that everyone has read/write/execute permissions on the whole thing, but I try to save a file into the partition and I get an access denied error. First of all this doesn't make sense because ls is telling me I do have access.
Then it gets weirder. I run sudo chown -R me:me directory. The command exits without error, but then when I go and look at the directory again with ls, it still shows up as owned by root and I still have the same problem. This is particularly strange because I am still able to change permissions normally in the operating system filesystem. It just won't work on the mounted partition.
View 1 Replies
View Related
Dec 2, 2010
I have been following this guide to install Apache, PHP & mysql - [URL]. When I get up to the step 'mysql -u root' I get given this error:
Code:
tom@tom-laptop:~$ mysql -u root
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO)
How do I overcome this?
View 2 Replies
View Related
Apr 4, 2010
I have same problem with *.bin files.When I try to install software from *.bin file I see error:
Code:
[andrew@notebook Programming]$ ./installbuilder-qt-professional-6.3.0-linux-x64-installer.bin
bash: ./installbuilder-qt-professional-6.3.0-linux-x64-installer.bin: Access denied
[andrew@notebook Programming]$
When I run command ls -la I see this:
Code:
[andrew@notebook Programming]$ ls -la installbuilder-qt-professional-6.3.0-linux-x64-installer.bin
-rwxrwxrwx. 1 andrew andrew 82624164 Апр 4 16:39 installbuilder-qt-professional-6.3.0-linux-x64-installer.bin
[andrew@notebook Programming]$
This error exist if I try to install this application with root access. What I mast do for fix this error?
P.S. I have Fedora 12 x86_64 on my notebook ASUS M51Sn.
View 6 Replies
View Related
Dec 7, 2010
i have tried to follow some the tutorials on google to setup mysql for remote access however, cannot seem to do it. am i missing something.
i have edited /etc/mysql/my.cnf bind-address directive to a static ip address. then, i grant user@'%' access to database and restart mysql
after doing all that, when i try to remote access mysql i get "Access denied for user"
View 1 Replies
View Related
Nov 6, 2009
I can log in Mysql database successfully using
Code:
mysql -u myusername -p mypassword
Now, I need to execute GRANT PRIVILEGES. But, when I try to execute
Code:
mysqladmin -u myusername password mypassword
the below error occured
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'myusername'@'localhost' (using password: NO)'
View 4 Replies
View Related
Jun 24, 2010
I have Samba 3.5.3-61 running on a Fedora Core 13 system. I created a share that is browseable to all systems, and I made sure to create a user account via the smbpasswd utility. When I try to connect to the server from a Windows XP system, I am able to enter the appropriate sharename as well as the username and password.
View 3 Replies
View Related
Feb 13, 2011
for some reason root lost grant privileges and I can't get it back. The user got grant_priv = 'Y' in the usertable. I've tried to reset all the priviliges to the user by killing MySQL process and started up again without grant options with no luck. I've also tried lots of other things but can't seem to get it work. Here is what I get: Quote:
[root@xxxxxxxxx mysqldba]# mysql -p
Enter password:
Welcome to the MySQL monitor. Commands end with ; or g.
Your MySQL connection id is 2
Server version: 5.0.77 Source distribution
[Code]...
View 7 Replies
View Related
Feb 28, 2011
I need to get an old MySQL Client(4.1)to connect to an even older MySQL Server (3.23).The goal is to do a Java/JDBC connect to the old Linux/MySQL 3.23 database, in order to update text information for a Lucene search (which will also run on linuxdev2). The problem is that I can't connect to the Linux/MySQL 3.23 server from a remote Linux/MySql 4.1 client. I can't connect from JDBC; I can't connect from "mysql":
Code:
LOCAL (intranet):
mysql -uSOMEUSER -pSOMEPASSWORD mysql => OK
REMOTE (from linuxdev2):
mysql -uSOMEUSER -pSOMEPASSWORD -hintranet mysql => FAILS:
ERROR 1045 (00000): Access denied for user: 'SOMEUSER@linuxdev2' (Using password: YES)
[code]....
View 1 Replies
View Related
Mar 26, 2010
I set up a servber on my local machine, & also PHp - Both working fine.I'm trying to load up MYSQL i have installed it, & *can* start/stop the server. however if I do anything else with it, I get this error :-
Quote:
root@gordon-desktop:~# sudo mysqladmin -u root -h localhost password MYPASSWORD
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'root'@'localhost' (using password: NO)'
Query :-
1) How do I know MYSQL is actually active ? (apart from the message it says that its statrted (or stopped).
2) Is there a way to
a) Find out the usernames that are recorded on the MYSQL server ?
b) set / RESET the 'root' username (I know MYSQL root user is different to PC root user)
c) anything else I can do on the PHP / website code to see if MYSQL is working
(as yet, no tables / databases etc have been set up - as I can't get past this error message - I get the same error when setting up a database.)
Ps I did allow my usermname (when logged in to ubuntu) to edit / create files in the /usr/www/ directory (but it is still OWNED by 'root' - that directory)
View 4 Replies
View Related
Jan 5, 2010
I receive these messages after I enter my user_id and password in Ubuntu 9.04;
"An error occured while loading or saving configuration information for update notifier. Some of your configuration settings may not work properly." then clicking on details box this can be seen;- {Failed to connect configuration server; some possible causes are that you need to enable TCP/IP networking for ORBIT, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to gconf daemon: Message did not receive a reply (timeout by message bus))}
then there's another error message;
"An error occured while loading or saving configuration information for evolution-alarm-notify. Some of your configuration settings may not work properly." then clicking on details box this can be seen;- {Failed to connect configuration server; some possible causes are that you need to enable TCP/IP networking for ORBIT, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to gconf daemon: Message did not receive a reply (timeout by message bus))}
after clicking Ok. the desktop is just blank.
View 2 Replies
View Related
Nov 9, 2010
I think I screwed up my Administrative username in mysql.
mysql -u root mysql
ERROR 1044 (42000): Access denied for user ''@'localhost' to database 'mysql'
Can I just copy all the files in /var/lib/mysql >>reinstall MySQL >> copy all the old folders into the new /var/lib/mysql ( while MySql is off)
View 9 Replies
View Related
Aug 4, 2010
i've configured my laptop so i can use my domain account (active directory win 2003 DC) to logon to my machine. Now i'd like to browse and mount shares etc using my logon information. Now when i connect to a share with nautilus it tells me 'guest' can't log in and i need to re-enter my user info. This is a real pain since our passwords change often. Is there some way i can use PAM to authenticate? I've searched everywhere, but you only find info about the other way round (win->linux).
View 1 Replies
View Related
Apr 9, 2010
I've tried to install Wine but I get this error: [Errno 14] HTTP Error 400 :http://linuxdownload.adobe.com/linux...ata/repomd.xml Trying other mirror.Error: Cannot retrieve repository metadata (repomd.xml) for repository: adobe-linux-i386. Please verify its path and try again Not sure what is happening here. Can anyone give me some idea and maybe a way to overcome it?
View 4 Replies
View Related
