Networking :: Wired Setup In Vector 6.0 On Advent 6412 DVD Laptop?
Jun 17, 2011
I am in the process of reviving a legacy laptop using Vector Linux 6.0. Once past the x window issues associated with these old machines (and the SIS 630 chipset in general) the setup worked very well.
However, I have been unable to get the wired network working. Vector linux suggests eth0 is connected but I have no internet access in browsers or for slapt-get etc. The following is the process I have gone through so far (I am a convert to linux as of last month and networking isnt my forte so go easy!).
lspci output:
Code:
root:# lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 31)
00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
[Code]...
View 14 Replies
ADVERTISEMENT
Jul 9, 2011
I have an Ubuntu laptop connected by wifi to a Cisco router and a desktopUbuntu PC conneted by wire to the same router. I would like, if it's possible to connect them without using the Internet (I mean what I want it's not just communicate between them using SSH over the Internet, for instance, but also communicate without connecting to the Internet). My DSL connection it's 4 Mb/s while my router can work up to 100 Mb/s so I would like to take advantage of these 100 Mb/s to transfer files between the two computers instead of using 4 MB/s
View 5 Replies
View Related
Jun 2, 2010
I have BIG troubles trying to set up wired internet connection in Ubuntu! To be able to connect to the internet I have to enter my MAC address, 2 IPs, netmask and 2 DNS address. When I try to edit the default internet connection eth0 with my correct information, the minute I enter my MAC address and save the changes the network manager creates new internet connection with wrong data and use it instead! I can't select the correct internet connection from the top bar where the internet icon is, because it is just not there. The only connection that I can choice is the new default one with the wrong data! If I try to create new separate internet connection with my correct data the same thing happens! The moment I enter my MAC address and save it, the internet connection disapears from the list of internet connections in the internet area in the top bar and I can't select it. I tried googling it, but with no luck I think that if I set up my connection trough the terminal everything will be ok
View 2 Replies
View Related
Jan 26, 2011
Just installed ubuntu 10.10 on a Compaq Presario X6000 laptop... installed it inside Windows 7 and now I'm having problems going to the internet (wired.. or wireless).
View 3 Replies
View Related
May 28, 2010
I'm trying to install Ubuntu 10.04 on my Toshiba A200-12U laptop (with an Atheros AR5007EG wireless card), but networking is being problematic.I entered Network Configurations and tried to get 'Auto eth0' working -- I went to Edit > IPv4 settings and filled in 'Addresses' with the details of my connection:
Address: 192.168.1.254 (the local IP of my router)
Netmask: 255.255.252.0
Gateway: 94.195.208.1
[code]....
View 4 Replies
View Related
Mar 29, 2011
Machine brand: Acer 5253-BZ893 laptop
Ethernet controller: Atheros communication device 1083
Network controller: Broadcom Corp. Device 4357
iwconfig: no wireless extensions
network config: *-network UNCLAIMED
iwlist scan: Interface doesn't support scanning
Ubuntu release: 10.04.2
uname -mr: 2.6.32-28-generic x86_64
I have not been able to get an internet connection wired or wireless on my laptop. I downloaded the drivers from Acer's website and tried installing them using ndiswrapper. Still no luck.
View 3 Replies
View Related
Feb 25, 2010
I'm trying to set up a wireless or wired network (wireless would be better...) to share my connection with my housemate, as well as with some devices. The only guide I found regarding this (I must admit, I didn't have much time to put into research), was dating back to 2005, and although doable, seemed somewhat confusing. Getting to the point: is there a way (maybe a standalone program, or some kind of plugin) to share a connection?
View 9 Replies
View Related
May 1, 2011
I am facing a problem with the management of my network card after installing Ubuntu 11.04 32-bit Desktop edition.
There are two Network Cards and one USB adapter which I'd like to drive:
- Ethernet controller Broadcom Corporation NetXtreme BCM5703X Gigabit Ethernet (rev 02)
- Ethernet controller Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
- Realtek Semiconductor Corp. RTL8187 Wireless Adapter
Actually I need the wireless adapter to connect to the AP, so both of the ethernet card should be disabled. Infact, when I try to access to the AP I must disable the eth0 card by using (sudo ifconfig eth0 down), otherwise the route assigns the default gw (192.168.1.1) to the eth0 device and the network is useless.
View 2 Replies
View Related
Jun 9, 2010
I have no wired or wireless internet after installing 10.04 on a dell e1505 laptop.
View 2 Replies
View Related
Jul 14, 2010
This may be more suited for the networking forums, but I figured Community Cafe would be well rounded enough for someone to tell me if this is even possible (with minimal configuration that is).There are a few places I travel where I only have a wired connection to the Internet (no wifi), but when this happens is there a simple way to create an adhoc network so wireless devices can route through my computer and to the network? Reason I'm asking is I'm thinking of getting an iPad or iPod Touch which have wireless connections, but in the cases where my laptop is using a wired ethernet connection and the wireless card isn't used, I'd like to create an adhoc wireless network that'll let such wireless devices work.
View 4 Replies
View Related
Nov 12, 2010
I am a beginner to ubuntu. I have installed ubuntu 10.04 on my laptop using wubi.When I am trying to edit the IP address using network editor,apply button is not highlighted.I managed to give IP as well as netmask through command prompt.But I am not able to give gateway and dns IP.Please help me configuring this.
View 1 Replies
View Related
Dec 10, 2010
My laptop has been working fine with ubuntu 10.04, and earlier today it shut down after running out of battery. I came to use itr and discovered that the wifi icon had disappeared from the panel bar, and it won't connect to the wireless networkor via a wired connection.I have had a play around with this, tried ping -c5 google.comresult was:ping: unknown host google.comand ping -c5 4.2.2.1result: onnect:etwork is unreachable.I have other computers connecting to this network and know that it is working fine.
View 8 Replies
View Related
Jun 8, 2010
I tried to follow this guide on how to setup wake-on-lan with a laptop, but instead of
Quote:
Auto-negotiation: on
Supports Wake-on: g
Wake-on: g
Link detected: yes
I got this:
Quote:
Auto-negotiation: on
Supports Wake-on: g
Wake-on: g
Link detected: no
I must confess I didn't see any setting in the BIOS that directly referred to WoL, but I enabled something and hoped it should be right. Is this the problem? Is there any way to check if the hardware supports WoL other than looking through the BIOS?
View 1 Replies
View Related
Jul 28, 2010
I have successfully created an access point on my Laptop via Madwifi drivers. A second laptop can successfully associate with the created AP. But ping is not possible from both sides.
AP on the first Laptop:
ifconfig ath0 10.0.0.1 netmask 255.255.255.0 broadcast 10.0.0.255 up
Second Laptop:
ifconfig ath1 10.0.0.50 netmask 255.255.255.0 up
route add default gw 10.0.0.1
Association works, but ping command is not possible from both sides:
ping 10.0.0.50
ping 10.0.0.1
What could be the problem?
View 3 Replies
View Related
Jun 18, 2010
\How can i setup my computer (currently running Ubuntu 10.04 lts) into a router so that other laptop can have a wireless connection to it and be able to access the Internet?
View 4 Replies
View Related
Jun 6, 2010
have Unix and Windows experience. So will need some hand-holding.Need help getting my wireless network to work on my newly installed Oracle Linux on Dell laptop.Not sure what wireless card is installed, or it's mac address (though I can boot into windows and get that info I don't want to - it'll be kind of a let down if I can't fix it all thru Linux).Install has detected a Broadcom wired card, but not the wireless. Funny thing is that it detected the Bluetooth
View 2 Replies
View Related
Oct 27, 2010
I want my netbook to connect automatically to both the office wired/static network and to the usual wired/DHCP networks.
wicd is wicked but netsearching hasn't revealed how to configure it for both wired/static and wired/DHCP except by manually switching profiles.
wicd's profiles can use pre/post(dis)connect scripts but I don't know how to integrate them into wicd when they are upping/downing connections on cable (un)plugging.
If it is not practical to solve this within wicd, I'll explore standalone scripts to configure eth0 on cable (un)plugging, as detected by ifplugd.
View 2 Replies
View Related
Sep 4, 2010
I using clonezilla-live-1.2.5-35-i686 to create an image of my Advent 4211 netbook, this netbook is essentially a MSI Wind. The image is to be saved to an external USB drive. I have used Clonezilla before with success, and a few failures, hope this isn't another.The LiveCD boots fine, I select the first video mode, it then tries to start but reports an 'undefined video mode number :317' it then offers the option to carry on or 'Enter' to try other options or 'Space' to continue, I have tried both options but they end up with the same out come, which is the following.
It does a bunch of hardware detection, 'usbcore' etc etc, then gets stuck at 'libata version 3.00 loaded' for around 5 minutes, then eventually moves onto 'clocksource tsc unstable (delta = -6575758ns) Time:hpet clocksource has been installed', stick on this for around 3 minutes and then eventually I end up with'/bin/sh: can't access tty; job control turned off' Is there a solution to this? Or just have to accept that it will now work with my hardware? The odd thing here is that people have used Clonezilla successfully with this type of Netbook, I also read that people and issue but offered no solution.
View 1 Replies
View Related
Jun 27, 2011
Trying to set up a LAN with an FC14 laptop, FC15 PC and a Windows machine running XP. I have SAMBA installed on both FC machines, but neither of them can see shares on each other or the XP machine. I can ping between all of them. The Windows machine sees all of the SAMBA shares.
When I attempt to Connect to Server under Places on the FC15 PC, I do not have a Windows share option to choose from as I do on the laptop, suggesting smbclient isn't configured correctly on that machine. SMB, NMB and WINBIND are installed and activated on startup on both FC machines. Although I have the Windows share option on the FC14 laptop, it will only connect with the IP address.
Firewalls and SELinux on both machines are disabled. Here are some configuration details:
rpm -qa | grep samba
samba-3.5.8-68.fc15.1.x86_64
samba-winbind-3.5.8-68.fc15.1.x86_64
samba-swat-3.5.8-68.fc15.1.x86_64
system-config-samba-docs-1.0.9-2.fc15.noarch
samba-winbind-clients-3.5.8-68.fc15.1.x86_64
[Code]...
View 3 Replies
View Related
Apr 10, 2011
I can use my wireless at work but at home we just have a wired connection. I am unable to connect. I am using Girlfriends laptop at the moment. My comp is a compaq presario v6000.
View 8 Replies
View Related
Jun 7, 2011
I'm having a BSNL modem connection I want to install it in ubuntu but I don't know how.I'm using windows and running ubuntu side by side.
View 6 Replies
View Related
May 25, 2010
I have recently installed Ubuntu lucid lynx and at my old house I had a regular cable modem (no wifi) and never used wireless internet. I would simply unplug the ethernet from the windows desktop plug it to my laptop and I was good 2 go.have recently moved and my roommate has a cable modem w/ wifi capabilities. When I plug in I am told that I am connected but......Nothing. dont know if the problem is due to the modem having wireless capabilities when my old one did not or the fact that my roommate has a win7 laptop that is connected via wifi etc. There have been a FEW times that I have walked out plugged in and everything has ran well. when I do plug in I look under connection information and I am told that I am connected at 100Mbps but whenever I try to visit a page I am out of luck. I define newbie (as far as Linux distros) and I have tried everything including going to work w/no sleep because I'm going through massive trial & errors
View 10 Replies
View Related
Jun 18, 2014
I need to share internet connection through wired-ethernet with another computer which does not have a wifi card.
However, no eth* interface shows up on ifconfig. Even more surprinsingly, neither lshw nor lspci shows anything related to wired ethernet controller/adapter:
Code: Select alllshw -C network
*-network
description: Wireless interface
product: WiFi Link 5100
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: wlan2
[Code[ ....
Why isn't my laptop's wired ethernet not showing? I have a Toshiba Satellite PSAG8U-04001W.
The installation of Debian wasn't originally on this system: it was on an older laptop whose motherboard fried, so I rescued the hard drive as well as the Debian installation. However, I doubt this should have anything to do with lspci not even detecting the wired eth controller.
View 2 Replies
View Related
Oct 22, 2010
Just set up my home server (xubuntu 10.04), its wired to my router. I can connect to the server on my laptop (10.10 ubuntu) via Ethernet, but how do i go about connecting wirelessly?
View 2 Replies
View Related
Mar 11, 2011
I have just done a new install of the latest opensuse 32bit and for some reason I cannot connect to the internet, when I click on mange connections the vpn tag is highlighted and all the other tabs are grayed out and I cannot select them. So I can't setup a internet connection wired or wireless. I was just using Kubuntu and did not have this problem. My card is broadcom.
View 9 Replies
View Related
Sep 22, 2010
I'm trying to set up Lubuntu on an old laptop, and I decided to install skippy-xd on it, to get expose type effects. That bit worked, hurrah! However, I can't seem to get skippy-xd to start automatically on boot. I always have to start it manually with the run command. Boo. I have tried adding
Code:
skippy-xd.desktop
to
Code:
~/[user]/.config/autostart
I have tried adding
Code:
skippy-xd
[code]....
View 1 Replies
View Related
Sep 22, 2010
I've got a long road trip day after tomorrow, and thankfully, I'm not driving. I own 3 working laptops which I'm bringing with me, along with 2 brothers who enjoy starcraft (1). I've never setup a LAN before, how would I do it? My laptop's dual booting slack and lucid, the other two are vista/karmic and standalone 7. All 3 have cards capable of wireless G and Ethernet ports.
View 4 Replies
View Related
Apr 7, 2009
I am upgrading my old 40G hard drive to a new 160G one and want to know the best way to set it for use with my system. I currently have a Windows partition which I want to keep & reinstate onto the new drive. Then I want to have another 3 partitions for different distros.
What should I do as a first step when I put the drive in boot off a live CD. I am assuming that I will need to do. If I do a, # grub-install, will this then format the MBR and then create a small partition for /boot. Following that, do I just restore the Windows partition immediately after the /boot partition, and then create new partitions for the distros accordingly.
I would also like to create a seperate swap partition and then install F10. Is there an option in Anaconda to not use LVM (can't remember).
View 5 Replies
View Related
Jan 22, 2011
Fresh installation of Fedora 14 x86-64 on Lenovo T510. I'm trying to setup graphical remote connection to this laptop via VNC. I installed vnc-server package and altered /etc/sysconfig/vncservers accordingly:
Code:
VNCSERVERS="2:awajda"
VNCSERVERARGS[2]="-geometry 800x600 -nolisten tcp -localhost"
I found Remote Desktop which opens vino-preferences and ticked the check boxes there. I started vnc-server and then I tried to connect to it from the same local host using vncviewer. I got no errors and the window with correct resolution came up. The problem is - that window is black and empty. I tried looking into Fedora docs but I haven't found anything useful there. I tried google and I found about 487693746874363 solutions and different ways of installing and configuring VNC server. I tried a few - none helped.
I wonder if there is a decent and consistent documentation about how to make remote desktop working in Fedora without having a real pain in the ass trying out those gazillion tweaks and tricks from various forums and blogs? After all Fedora 14 comes with that Remove Desktop thing available out of the box. Is it a real working thing or just a marketing Should I uninstall all the preinstalled VNC stuff and follow one of those painful instructions found on the internet from A to Z praying for it to eventually start working after all the magic is done and hours or days are wasted?
View 1 Replies
View Related
Aug 1, 2011
I have installed Fedora 15 on a Acer Aspire one computer laptop. I have some missing windows for Network settings windows.First issue:When setting wep or wpa or wapa2 there is no windows to type in the passphase and key so the laptop can connect to the wireless netgear wireless router.Second issue:Once a password is typed in the one line access there is no way one can reset what has been typed in. Gassp! Check this out....one can highlite wireless and options does not light up. When one highlite wired options lightup and you can click on the tab 801.11something like that for wireless but this is for the wired not for wireless.....I know because I have tried it and had to reinstall fedora software because I could not remove the password and user name
View 2 Replies
View Related
