Networking :: Set An Ip Address On A Computer Remotely?
Mar 20, 2011
there is a way to set an ip address on a computer remotely. Here's my issue : Have a debian computer (plug computer) on which, after upgrade, i m not able to log in back anymore. At the moment it seems i have no chanche to connect something like a monitor but i m pretty sure the computer it boots up cause wireless is on and i can see ssid and mac address of the ap.
I ve tried to assign an ip to the mac address (from my laptop) by arp and in the table it shows the link between the mac and ip, but i m unable to ping the ip after that. I was trying to think of maybe set up a dhcp server from my laptop and see if the plugcomputer gets an ip automatically, but i m not sure if it is working and at the moment i have little experience on set up a dhcp server on linux (sabayon). Do you think is it possible to manage the network card of my plug computer by eth/wlan from my laptop?
Remotely, I can do the first two no problem, but the ifup command causes some problems since the ethernet interface is no longer functioning. Is there some kind of script that can be written for this purpose? Maybe something that will check eth0 every so often and make sure it is running and bring it up if it isn't. Or else a script run with nohup?
I do not intend that changing the IP address will be a frequent occurrence, but when it needs to be done, it must be done reliably and without the possibility that the computer will no longer be reachable for more than a couple minutes or so.
i have a computer at another house that i would like to controll from my house (both run ubuntu lucid lynx) how do i connect to the other computer using the viewer and remote server pre-installed in ubuntu
I have my Linux box in my Lan environment. I want to connect my Linux computer remotely from my windows PC using command line . how can I connect it remotely over the Lan ?
i want to find ip address of other computer which are connected in LAN..suppose ther are 5 compter in LAN and i want to find ip of all remaining 4 computer using my computer only in command or any other way is ther....
i have 2 computers.both have pidgin messenger with the same accounts (yahoo, msn, aim, facebook...). both can connect at the same time. both connect at startup.both work well.some of the chat protocols disconnect upon sensing multiple connections (as in, when one account signs in from two places).good.others don't.bad.
is there a way to remotely disconnect the OTHER computer's pidgin while using the current computer? while both instances of pidgin are running, the OTHER computer will see all incoming messages on pidgin. anyone at that computer will see a one-sided conversation.simple solution would be to stop them from connecting at startup. that still doesn't solves the problem of "what if i forgot to turn one off" or "what if someone runs pidgin on the other computer."
I need to change my Mac address to be the same as another computer. My university for some reason only allows 2 computers per jack i think! and i have 3. for some reason when i plug my 3rd PC in i lose connection on my other two. i have a win 7 laptop and a Ubuntu laptop. I want to setup a small server since my school blocks all ports off campus i can't use it off campus but i want to use it on campus.
My 3rd PC is a ubuntu Desktop is there a program i can use or a command i can use to spoof the mac address.
One of the computers attached to the network is giving localhost instead of 192.168.x.x in Remote Desktop config page therefore I'm unable to access it:
Quote: Your desktop is only reachable over the local network. Others can access your computer using the address localhost. Other computer and even other accounts on the same computer are showing something like:
Quote: Your desktop is only reachable over the local network. Others can access your computer using the address 192.168.0.8. How can I fix this?
I have read in a forum that a computer can have the same MAC Address with its router in the sane LAN but how is that possible? Isn't every MAC unique? Also I have not understood, when we send a packet to a PC that is not in our LAN the packet should have the IP Address or the MAC Address of the computer that we want to send?
I'm not terribly new to Linux, but I am new to the forums, so hear me out! I am in the process of creating an electronic mapwall for our meteorology program, and have designed the computing system from scratch. I have two Linux Boxes, each with capabilities for 6 attached monitors...a total of 12 displays driven from two machines. My intention is to have one machine be the master...it has a touchpanel control. The inputs to the touchpanel will then trigger events for the both the master and the slave machine to display. Each of them has a specific IP address (DNS entry), and are not on a subnet.
Now...is there a way to remotely login to the slave machine and have it display on it's OWN monitors? The code is Java and which works on the master machine to animate directories of .gifs for each of the master's attached monitors. I will most likely have Java execute shell commands for the remote login (ssh), but I believe the answer lies somewhere in the X-configuration. Do I have the machines in an adverse configuration (creation of a subnet would be better)? Lots of questions...lots of desire...few answers!
I couldn't find an answer to this question (not including vpn) on different threads so decided to eventually post it, though it's probably easy one. I would like to connect to some application on known IP and port in the internet from my LAN computer. However to do so (I have some application, not any administrative constraints or not being allowed to) I would like to use local addresses. So, let's say - I want to connect to the external host VV.XX.YY.ZZ, port AA using 192.168.EE.FF port BB. Baically so far I have limitation in my application (too many places for possible error, to correct it right now - will change it in future). Is it possible that after my application sends request to 192.168.1.EE port BB, my Linux transparently translates it to VV.XX.YY.ZZ:AA? I tried iptables tutorials and some forums, but nothing seems to be addressing this issue. I don't know if it's event possible with iptables but am pretty sure this should be possible.
I recently setup motion on one of my computers with a USB camera. On that computer if I type [URL] I can see my live video. If however I type [URL] on that computer or any other on my wireless network, I get a page cannot be displayed. I checked that UFW was disabled and I am able to ping the motion computer from any other computer on my network. Also I am not sure if it matters but I do have apache installed on my motion computer as well. why I cant view my live video from different computers I am using Ubuntu 10.4 on all computers
I'd like to have my Linux box (a QNAP TS-210 NAS) send the order to go to sleep (or hibernation) to my main Windows 7 computer.As the NAS is running Linux, I can't use psshutdown from SysInternals' PsTools. Is there any Linux equivalent? Or some "magic packet" that can order the Win7 computer to sleep.I know I could install a SSH daemon and trigger a shutdown command from the Linux box using ssh, but ideally I do not want to install anything on the Win7 computer. I can install Linux software on the NAS, no problem about this. PHP, python and perl are also available on it.
how you remotely enter another computer and take control of it. (with or without the owners permission) the reason is because my grandparents are constantly having problems with their comps(reasons for the admins
I have quick question, How to install on the remote computer.currently I wan to install sugarcrm to the computer that I access remotely from mine. How can I do it?
Is there a command to remotely shutdown a computer on the local network? I have a computer running as a file/print server and I have no screen or keyboard connected to it. Would be great if I could shut it down from my laptop. I have the needed credentials (as I'm guessing these would be needed in the command?)
Currently my OS is Ubuntu 9.04 Jaunty Jackalope Desktop OS and my web server is Apache2. I have a public address 60.x.y.z and my pc local address is 10.x.y.z. I have a web app in my Apache2 which currently run in localhost(10.x.y.z).
I would like to enable the web app so that it could be browse from outside. I know there maybe some port forwarding process and some commands involved in order to do that. But I have no idea on the steps to do that.
I am working on implementing a protocol on NS2.34 .I really need help to solve this problem . Actually , I don't now whether the problem is generated by the tcl code or the c++ code when I run the simulation, I get this result :
Code: num_nodes is set 64 INITIALIZE THE LIST xListHead 34 45 channel.cc:sendUp - Calc highestAntennaZ_ and distCST_ highestAntennaZ_ = 1.5, distCST_ = 550.0 SORTING LISTS ...DONE! code....
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
I'm running Ubuntu 10.10 and I'm having problems trying to assign it a static IP address. No matter what I put in the Preferences->Networking area (identifying the interface as Manual)... it still will query DHCP for an address if I run the dhclient command. I'm using to using ubuntu server where I just set the IP in the interfaces config file.
I am running my own Postfix mail server. Some time ago I noticed that most email was rejected because of the server's dynamic IP address. So I got a fixed IP address. However then I noticed that some mails got rejected due to failing the reverse DNS check. So my ISP told me to get a range of IP addresses and they could then create a PTR record for one of those addresses. That is now running but it turns out that the IP address used for the PTR record is a ... dynamic IP address. So Spamhaus PBL rejects my emails again.
I have a few external IP's assigned to me by my ISP. I have IPcop as my router/firewall. I am wondering how to bind 1 of my external ip's to my internal ip address. So I do not have to port forward, etc. For Example, 77.77.77.77 to 192.168.1.123 and on the server it see's the external IP address.
After logging onto a linux machine via SSH, I would like to be able to retrieve the name of the computer from which the connection was made. Ideally I am looking for some command like hostname or uname but that would retrieve the name of the client instead of the host.
This information must be accessible somewhere, since when I log on I get a message that contains the clinent name from the last login:
Last login: Thu Mar 11 18:42:01 2010 from my.address.com
The reason for wanting to do this is to be able to take different action in my .login file depending on which computer I am currently connecting from.
I want to transfer files from my laptop to my desktop remotely over the net. Both these computers access net via different service providers and have dynamically assigned IP addresses. If I know the IP address, I can use ssh to accomplish my task. However if I don't have physical access to the desktop, I cannot know the IP address. Is there a way by which a the desktop sends its public IP address to me so that I can establish ssh connection ?
I closed all Internet related apps and the connection persisted. After a reboot it did not reconnect (yet).The IP address appears to belong to esomniture.com - some sort of web analytics company. How do I prevent my computer from connecting to these rascals. I have found a lot of documentation regarding stopping inbound connections to services on my computer but not the other way. I have various filtering addons installed in Firefox however, this connection seems to be at a lower level as no program is specified as being responsible for the connection.
