Networking :: Unable To Enable Ethernet On Recycled HP Pavilion Win98 Machine
Oct 28, 2010After reading about Linux I decided to try it on an old HP Pavilion model 6617 desktop running Win 98 - so far with limited success!
View 10 RepliesAfter reading about Linux I decided to try it on an old HP Pavilion model 6617 desktop running Win 98 - so far with limited success!
View 10 RepliesI'm using ubuntu 10.04 enterprise cloud server for my project. I use USB NIC to interface with other 2 servers. but the system doesnot detect USB NIC. detect & configure USB NIC in the network.
View 5 Replies View RelatedI recently installed CentOS on a really old computer and while most things are running well, I am unable to connect to the internet. Using a Damn Small Linux live CD I am able to connect just fine and was able to see that that 'hp100' was being used as the netcard driver. When I tried to set up the network card using that adapter (HP10/100VG ....) it gives me the following error code...
View 1 Replies View RelatedIm new to this Cent OS as well as Unix based Operating Systems. Please help me with the below requirement.My Company is a Serach based data collector from different websites like Google, Yahoo & many more..Collecting the data from the search engines is a issue for right now.. As many search engines are blocking us to search and retrive the date after some time.. Taking Google as example : Google Blocks my IP after every 30 mins of retriving.. Application is a Windows based & using Windows 2003 as the Server.. Would like to give a Dynamic IP to the Windows Server via 1st Ethernet Card & enable the 2nd Ethernet for the Internet..Eg : eth 0 = 192.168.1.1eth 1 = x.x.x.x (Public IP)I have check with few of my friends who told me to get Linux or Cent OS installed to do a interface disable after given time & enable a secondary device or virtual interface the next couple of seconds... Like eg : eth 1 = x.x.x.1 eth 2 = x.x.x.2 eth 3 = x.x.x.3 so on.. Would like the eth 1 to be down after 60 mins & eth 2 o be up & again after 60 mins of up time eth 2 down & eth 3 up.
View 6 Replies View RelatedI've had a host of problems since upgrading to 11.04 Natty Narwhal, so let's deal with these 1 at a time.
I've got a Hewlett-Packard Pavilion G60 laptop. Next to the power button is a handy wireless on/off button. This has always worked well with previous editions (9.04,through 10.10). first press toggles the wireless off, second press toggles it on.
Not so in 11.04. The toggle off works great, first time. But, it will not toggle back on. Not after any number of tries, not after restarting, not after booting into other OS's (9.10 and Vista) re-enabling it there and then booting back into Narwhal. to further complicate the issue, this feature bypass the network manager, so toggling the wireless off by the switch leaves me showing no wireless adapter in the network manager. I also restarted, switched from Unity to a Gnome session, but the issue still persists.
As my only network options are wireless, this has become a substantial inconvenience.
----
EDIT: so the network util is actually saying "wireless disabled by hardware switch". Also noticed it I enable it in 9.10, reboot to 11.04 (where I inevitably fail to re-enable it), then reboot into 9.10, it will initially be disabled. The key difference is in 9.10 I have the ability to enable wifi using the hardware button. It seems that 11.04 is remembering that wireless is disabled between boots. Is there a place it might be storing this value? If so, I may be able simply to set the value as enabled, since toggling that silly button isn't working.
-----
EDIT 2:
found this thread:"Wireless disabled by hardware switch" bug? - Natty
seems to be a similar issue. I'll be following how that one develops, too.
I want to transfer the audio file on linux machine using Ethernet port, is it possible?
View 6 Replies View RelatedI have a Fedora Linux machine and a Windows XP machine and I want to enable TCP/IP connection between them using a cross-over cable. I have a type of middleware server running on the linux machine and I want to be able to run the client for the application on the windows machine and work that way. I have heard Samba as a solution but my understanding is SAMBA is mainly for file sharing.. and is not necessary for establishing TCP/IP connectivity. Is this a correct statement? How can I go about setting up TCP/IP connectivity between the two machines?
View 2 Replies View RelatedI recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
View 3 Replies View RelatedI have a ubuntu 9.04 machine i'm using as a file server. I'm able to see that machine from any XP machine, connect to it's shares play music, movies, work off of it NO problems. But i can't view the shares from a windows 7 home edition PC (garbage). AND, from the ubuntu PC, i can't see any of the other shares on network. I get "Fail to receive share list from server".
NOTE: Originally i had this machine connected with wireless card because of location. and I was able to see all shares then - both ways (still not from Windows 7 PCs though). However, when I moved to hard wire connection, the network disappeared. I've tried changing IP addresses, changing switches, but no network. I'd like to keep it hard wire. Can anyone point me in right direction or am i missing information?
I had this sticky problem with b43 drivers. Unfortunately, on my Acer Extensa 5620z I'm not even able to connect via ethernet, so I can't download upgrades, driver or whatever. This was initially with 11.04, so I've decided to get back to 10.04, but the problem persists. Then, here we go with details:
networking checked - is enabled.
Ip configuration (I've got static local address) - is ok.
Ifconfig - recognizes eth0.
Iwconfig - recognizes wlan0.
Ping - 100% packet loss, always.
dig - goes on timeout.
netstat -an - doesn't show any connection with external address.
My Eth0 has 3 virtual Ethernet (eth0:1, eth0:2, eth0:3)
Eth0 -> 202.1.1.1
Eth0:1 -> 202.1.1.2
Eth0:2 -> 202.1.1.3
Eth0:3 -> 202.1.1.4
I am unable to ping them (202.1.1.2 - 202.1.1.4) from Client's PC.
I have a workstation with the two ethernet ports (eth0, eth1), the problem is that i cannot run with both ports up and running. I can run with either one of them, but not both.
Below is the contents of my /etc/network/interfaces file:
Code:
Running on 64 bit Ubuntu 9.10 Desktop
I have just installed a generic PCI ethernet card into a fairly low powered system (Celeron 766MHZ, 512mb Ram, 40 Gb HDD, Generic sound and video). The card came with no drivers. I have since installed Ubuntu 9.10, and up to a point everything is fine and looks great. However when I connect an ethernet cable up to the PCI card (in the hope of connecting with the Internet), nothing happens. I am thinking that I need Ubuntu drivers for the PCI card ? or does Ubuntu 9.10 come with drivers and I need to go into the 'engine room' to sort it all out ?
View 1 Replies View RelatedI have tried the command on ubantu workstation but it giving error : # mii-tools SIOCGMIIPHY on 'eth1' failed: operationsnot support. no MII interface found.
Internet not working. tell me anonymous of kudzu command in fedora.
Unable to access our site via eth0. Can access the same site, via same ISP on wireless laptop, or via eth0, but using ip annonymizer service. Have a feel that it could be something obvious, but after digging through Modems firmware I am running out of ideas
View 3 Replies View RelatedI am using ubuntu (11.04) here, when i connect Bsnl broadband link(wired connection). Internet is connect automatically But unable to instal, upgrad and access Internet pages ..
View 1 Replies View RelatedI have just installed ubuntu 10.04 using the wubi installer to dual-boot my machine. Under ubuntu, I am not able to connect to the internet or my router. Everything works fine under windows. I have tried to find relevant information in the forums, but nothing seems to work for me. I have tried disabling ipv6, setting a static ip, but no go. ifconfig shows no IP, dhclient results in no DHCP offers and pinging my router's IP results in Network is Unreachable.
View 9 Replies View RelatedI am unable to find Atheros AR8132 PCI-E Ethernet Controller driver for CentOS which is installed on my netbook.
I contacted DELL to provide me the driver and they said that they do not support Linux on netbook and I have to arrange it myself.
I told them that I don't need help in installing I just need the driver file to which they said that they don't have driver for Linux.
NIC is getting detected and works fine on the same netbook (Am dual booting Windows7/CentOS) with Windows7
When I type: ls -l /dev/ it does not show up eth0. Same result with ifconfig. When I type lspci | grep net it does show up something like Atheros Communications AR8132 L1 PCI Gigabit .
I have recently installed 11.04 on my ASUS EEEPC 900 and am having problems with getting the wifi enabled and able to pick up any signal. It has a broadcom device in there and although I have downloaded the patch that should be able to fix it Im unable to install it.
View 4 Replies View RelatedI am running 3 guest machines in KVM and also I have bridged the host machine so that I would be able to get the network access on the guest machines and I am getting it also, but the problem is that I am not able to ssh one guest machine from another guest machine moreover I am able to ssh the host machine from any of the guest machine.
View 1 Replies View Relatedhave read [URL] lspci | grep Wireless 10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02
[Code]...
have read [URL] but still could not issue the problem how should I resolve my wireless isusues?
I've just installed Ubuntu 9.10 64 bits on my new HP Pavilion dv6, but it seems to boot almost randomly. I think it might be an issue related to the ATI graphics card, but I don't know how to solve it.
View 1 Replies View RelatedWhenever I try to install 10.4 on my daughter's HP Pavilion dv6000 the installation screens show up as stripes, three of them, on the page.I don't ever see a full screen so I can't run the install. I've tried the 32bit, the 64 bit, and the dual boot for Windows options.
View 1 Replies View RelatedI am using a Linksys WMP11 V27 pci card that supposed to be talking to a Linksys BEFW11S4 wireless router (802.11B) ...I am able to connect directly to internet (ethernet cable hooked to this wireless router) ... but for indepedence I need to go wireless.I defined the configuration using the Network Connections ... also through ndisgtk .. can't seem to get this two to consolidate.On /var/log syslog I see ....
an 22 14:27:10 ubucomputer NetworkManager: <info> Sleeping...
Jan 22 14:27:10 ubucomputer NetworkManager: <info> (wlan0): now unmanaged
Jan 22 14:27:10 ubucomputer NetworkManager: <info> (wlan0): device state change: 2 -> 1
[code]...
I'm trying to establish a connection to my ISP which uses PPTP protocol and a VPN server. The deivce I got from my ISP is a modem, not a router. The problem is my computer is unable to communicate with the ISP VPN server.
P.S Here are the instructions for Windows XP which work: http://portal.bnet.hr/ZG/windows-xp.htm
Here's what I have done so far code...
I have dual boot system and on windows I am able to connect to wireless but on Ubuntu I am not able to connect to wireless.
I desire to learn to trouble shoot the problem my self hence I would appreciate if some one guides me How to look for the problem.
and how to find what is wrong and right
That is why I am not posting any output here but rather would like to learn to solve the problem by myself
I reported recently that I have a problem connecting to a Windows network, and someone suggested upgrading to Ubuntu 10.4 I have done, and still have the problem.
The error message I get is: "Unable to mount location. Failed to retrieve share list from server".
I have setup an OpenVPN server on my server box, it had been working perfectly until today. It operates on port 1194 which I am now unable to connect to (tried telnet). I have checked all the firewall rules and they still allow the port and I have also checked to ensure that OpenVPN is still listening to the port, which it's not but I have tried restarting the service and the box which dosent make any difference. The only thing that has changed is that yesterday I installed Openfire, could this have broken something?
View 1 Replies View RelatedThe wireless on this computer has worked with Ubuntu just yesterday so I know all the drivers work. The trouble is that now the wireless is turned off and the hardware switch has no effect. Is there a way to force enable it through the terminal?
View 1 Replies View RelatedI can't connect to the Internet through my wireless card. Plus, it's disabled and I can't enable it. It's grayed-out in the Network Manager on the top panel.I ran this code in a terminal:
Code:
*****@ubuntu:~$ sudo lshw -C network
[sudo] password for ******:
[code]...