Whenever I try to install 10.4 on my daughter's HP Pavilion dv6000 the installation screens show up as stripes, three of them, on the page.I don't ever see a full screen so I can't run the install. I've tried the 32bit, the 64 bit, and the dual boot for Windows options.
View 1 RepliesNot sure exactly where to go on this one... I'm trying to get the embedded/stock webcam on my wife's Dell dv6000 to work.
I'm told that this webcam works fine via uvcvideo and have tried to install the package but am thinking the problem is with ubuntu's detection itself.
Outputs:
Code:
christina@christina-laptop:~$ ls -la /dev/v*
crw-rw---- 1 root tty 7, 0 2010-11-13 15:26 /dev/vcs
crw-rw---- 1 root tty 7, 1 2010-11-13 15:26 /dev/vcs1
crw-rw---- 1 root tty 7, 2 2010-11-13 15:26 /dev/vcs2
[Code]....
I recently upgraded from 9.04 to 10.04 and can no longer connect to the internet, even after enabling wireless networking in the Network Manager. This happened to me on a different laptop recently, but someone here linked me to the proper drivers and solved my problem.
lspci
Code:
00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
[Code]....
I downloaded ubuntu 11.04 on my HP Pavilion dv6000 laptop and the wifi on it doesn't work. I'm running it in parallel with windows xp and the wifi works find on windows (as it has always done) but once I boot the laptop in ubuntu, it doesn't recognise anything, no driver, nothing.
get the wifi working in ubuntu on my laptop. Ubuntu is pretty much useless to me if I can't get the wifi to work on it.
I've just installed Ubuntu 9.10 64 bits on my new HP Pavilion dv6, but it seems to boot almost randomly. I think it might be an issue related to the ATI graphics card, but I don't know how to solve it.
View 1 Replies View RelatedAfter reading about Linux I decided to try it on an old HP Pavilion model 6617 desktop running Win 98 - so far with limited success!
View 10 Replies View RelatedI had a similar problem with previous ubuntu release on the same machine: and again, I have no sound at all.
View 9 Replies View RelatedI am trying to install Ubuntu 10.04 on my laptop, a rather new HP Pavilion dv6-2044el. Windows 7 is already installed, so I've tried "installation inside Windows". I have been using Ubuntu for at least a couple of years, and this is the first time there is no way to complete an installation : The process halts after restarting the system. A few months ago I managed to install Ubuntu 9.10 on this laptop without any trouble, before disinstalling it. I have tried:
ubuntu-10.04-desktop-i386.iso ubuntu-10.04-desktop-amd64.iso both from a CD and an USB flash drive, always with the same frustrating result. I tried also to install 9.10 first and then upgrade to 10.4, but the upgrade didn't work either. Today I even tried Maverick Meerkat (maverick-desktop-i386.iso) from a USB flash drive, but it also halted during the process. [tags: HP, Hewlett Packard, Pavilion, 2044el, Lucid Lynx, Maverick Meerkat]
I create a Ubuntu boot disk 11.4 and selected Install all I got was a little white box near the bottom right of the screen. I got a new hard drive and wanted to try the linux operating system. With the boot disk the computer does boot from the cdrom drive, but I can't get it to install. After hitting forward on the screen preparing to install ubuntu the screen it says installing and gets stuck at that point. Booted from cdrom got as far as the "Who are you?"screen then the screen went blank but I can still see hard drive activity. Is it formating the drive?
View 2 Replies View RelatedDoes anyone have experience installing CentOS on this machine (dual boot with win7)? It is Intel Core i3, 4G RAM, 500GB HDD. After starting from installation CD, when hit enter to install CentOS, a bunch of text was thrown onto the screen, the last message was: Kernel panic, can not sync ...
View 8 Replies View RelatedI completely deleted NTFS as having a boring windows doesn't make any sense today, installed it with ext4:
/boot = 200MB
/swap = 1GB
/ = space left
After successful install, the BIOS screen with HP logo remains stuck, it won't boot anything in another words. I can't get the boot loader, nothing as if it awkwardly trying to boot from external data drive. Did my hard drive go poof? or did I miss something during install? How can I get my hd to read?
I did a clean install, replacing 11.3 with 11.4 (BTW, why couldn't 11.4 recognize a ext4 partition??). When I boot, the cursor is a garbage block in the center of the screen. When I move, the cursor disappears. The display never progresses past the splash and no progress bar appears. When I boot in safemode, it works, but the display is slow and jerky. This is such a show stopper for me that I had to revert to 11.3 which does not like my touchpad.
View 3 Replies View RelatedRecently I tried to install openSUSE 11.2 on my HP Pavilion dv6-2125tx notebook PC which comes preloaded with Windows7. I used a DVD to install the openSUSE. Before installation, I created partitions on my hard drive for root, /home and swap by shrinking the C volume. This is the only way to create partitions on my laptop. I used NTFS filesystem during format of these partitions. During installation, the first error message that appeared was YaST error saying that it could not format the partitions though it was allowing me to set mount points and filesystems for the partitions I had created. The next problem was swap. I was not able to see the mount point and F (for format) for the swap partition. However when I continued by ignoring the warning for swap there was a partition for swap and it was the same partition I wanted to have for swap. So, I clicked the Install button. The next problem was grub error 17: cannot mount the partition. And then when I continued ignoring this too, the computer did not get any of the OSes saying that BOOTMGR (BOOT MANAGER) is missing. I had no options left but to recover it using recovery disks of my laptop.I searched a bit on the internet and found that grub error 17 happens if the corresponding partition exists but the filesystem is not recognized by the GRUB.
I concluded that it was happening bacause YaST was unable to format any of partitions with the filesystem selected. So in my next attempt, I formatted the partitions in FAT32 filesystem in Windows which I think GRUB can recognize. I did that because even if YAST would be unable to format the partition the filesystem could be recognized by GRUB.And I think that happened but I got a new error this time.The grub error 22.Now I don't know what to do. One thing that I am expecting is that my hard drive cannot be partitioned in the correct way for linux. I can only shrink the volume and create logical partitions only from one dynamic partition c. And that may be the reason YaST could not format the partitions in the correct filesystem and inturn the grub error is happening.
I'm clueless about this format I need to use for starting this threadI am trying to connect to the internet but have no network connections available and it says my wireless is disabled. (Ubuntu Studio 10.04)How do I turn it on?
1 ) Machine Brand and Model (PC/Laptop):
Code:
HP Pavilion, a6600f
[code]....
Installing Ubuntu on the laptop said it succeeded and required a restart, then before shutting down and after the cd popped out a string of
end_request: I/O error dev sr0, sector 2xxxxxx...
end_request: I/O error dev sr0, sector
end_request: I/O error dev sr0, sector
Thing is, grub didn't install! I'm pretty sure a full install of ubuntu 10.10 in on a partition that I can't access. To complicate matters further, loading Vista necessitated a restart when it installed a "generic volume driver" by itself. Restarting vista doesn't show any difference (obviously since vista can't see linux formatted partitions).
I want to install suse on hp pavilion dv6 1386et. Hardware Specifications: Microprocessor: 2.66 GHz Intel Core2 Duo processor P8800 Microprocessor CacheLevel 2 cache 3 MB
[Code]...
I have tried suse 10.3, 11.2 and also redhat 5 enterprise, fedore 12 and all of them gave ACPI error. I can not install linux. only suse 11.2 had given some hopeful progress. nevertheless suse default session does not work.In all attempts screen freezes.can anyone help me? and sorry for my bad english
I have a Hewlett Packard Pavilion dv5-1125nr laptop containing factory loaded Windows Vista. I have a lot of hard disk space on it and I wanna install Linux. But I don't know which version/distribution will work on this laptop.
View 4 Replies View RelatedI have an HP Pavilion dv6-2120ca and I'd like to find out where to find the graphics driver. This is the card: TI Mobility Radeon HD 4200 Graphics I plugged in my MP3 player in and it worked with Opensuse.
View 2 Replies View Relatedwith some troubles, i finally installed the broadcom wireless driver. it says it's installed and activated, the blue light on the laptop is on saying the wireless is activated, but for the life of me i can't figure out how to make it connect. the only network connection icon i have is the wired one. it's not showing the wireless, or available wireless signals or whatever.
this is my first time using wireless with linux (thought i've been using linux for about 4 years now), so maybe there's some stupid little box somewhere i didn't check or something. any ideas?
the laptop is an HP Pavilion dv9000, the distro is Ubuntu Studio 10.4, and the wireless card is a broadcom, and is installed/active according to the hardware drivers window. i've seen some posters having a problem in 10.10 with everything appearing to work, but just... doesn't. haven't seen a solution for that particular problem though
I just install Ubuntu 11.04 on an HP dv6000. Everything is working great except the wireless. It sees the wireless networks and tries to connect, but it never does successfully.
View 9 Replies View Relatedrelative n00b to linux, but figured out the whole Osx86 hype and thought id give linux a try. its funnu i just dropped ubuntu 9.04 for mythbuntu 10.04 and everything was fine before the upgrade, now my wifi doesnt work but it now has support for multiple monitors which is nice. i just want my internet back so i can stop useing my windows machine. i believe my card is a broadcom 802.11 g and the computer is an HP pavillion DV6505 us with AMD dual core TK-55, 4 gigs of ram. geforce 7150m/Nforce630m ANY OTHER INFO YOU NEED I GOTS
View 2 Replies View RelatedI'm running dual boot, Windows 7 and Zorin. The Windows Wifi side works fine. The install for Zorin (including updates, programs I selected from the repos, etc) worked fine, but now I can't connect to the net.It recognizes my router (Belkin), recognizes other networks (neighbors, school), and it says I'm connected but anything to do with the net (firefox, chrome, synaptic, etc) won't connect.Checking lspci, I get:
pgirl@leslie-nest:~$ lspci -nn
00:00.0 RAM memory [0500]: nVidia Corporation MCP67 Memory Controller [10de:0547] (rev a2)
00:01.0 ISA bridge [0601]: nVidia Corporation MCP67 ISA Bridge [10de:0548] (rev a2)
[code]....
I recently had sound 'working' as in I had to reload the alsa drivers each time I booted up my computer. After a year of giving up how to fix it, I looked it up again and was told to update my alsa drivers. I updated my drivers to version 1.0.23 and my sound was working but was still acting weird. For example, my sound would play a song, in Adobe Flash, at its highest volume even if the volume wasn't at max. I was just happy that I didn't have to reload the drivers, but this was another problem.Now, for some reason, sound just doesn't work. I've tried reloading the drivers several times and looked for a solution on these forums as well as on google. No luck. So I ask, is there anything I can do to get my sound to work?
View 9 Replies View RelatedI made my HP DV6000 into a single boot system. Red Hat Enterprise Linux 5, 64bit. I have been trying every cure I can find on the internet. I can seem to find the problem. My monitor show's everything on the screen as it's booting but then, when it's done, it goes blank and no keys/buttons work. I have it on the GNU GRUB screen right now. (The monitor is working fine (on this screen)
View 1 Replies View RelatedI have a HP DV6000 series laptop and its integrated webcam is not getting detected in Ubuntu 10.04 lsusb
[code]...
i installed it a few minutes ago,but there is a problem that there is no sound. when i boot with windows 7 sound works perfectly but when i use ubuntu it comes no sound.
View 3 Replies View RelatedI wonder if anybody could possibly help me with my new laptop. I bought a new HP Pavilion DV7-4150ea about a month ago with windows 7 x64 cough cough, hate windows and would love to be able to get Ubuntu 11.04 working on my laptop or any other version that will be ok.
What happens, when I install either live usb or install to hard drive from DVD, it locks up when I do a restart or shut down, it all seems OK until then.
Could it be the video cards installed on this laptop, as there is two 1 x 1GB ATI Mobility HD 5650 and 1 x Intel HD Graphics. Any help would be great as I love Linux and prefer it to windows every time.
If you need more info then please ask, love to get this working with linux.
I have an HP Pavilion laptop running Kubuntu 9.10. The sound worked at one point, but somewhere along the line it broke. When I test the sound in the system settings panel, I get nothing. No errors, no sound. I checked KMix and alsamixer. All channels are unmuted and turned up. I've also tried the headphone jack, and there's no sound there, either. It works fine if I boot into Windows. Here's the output from alsa-info.sh: [URL]... I would also like Amarok to work, too. I had problems in the past getting it to output sound.
View 7 Replies View RelatedBefore I go 100% ubuntu I need a few things. How can I make so if my headphones are plugged in that sound doesn't come out of my speakers? I got a HP Pavilion DV7-3065dx laptop.
Is there a TextExpander for ubuntu? I need to make it so if I hit my left and right mouse button at the same time a middle click is simulated.
I installed lucid lynx on my hp pavilion dm4 laptop, very happy with it. My wireless is not working though (I have ethernet working), I have looked for drivers for the Broadcom card that's supposed to pick it up, the light is orange. I have seen that many people have this problem, tried their solutions to no avail. I have ndiswrapper installed and have found some drivers that detect the hardware, still not getting wireless.
This is my output lshw -C network output:
Code:
rho@Schwarzschild:~$ lshw -C network
WARNING: you should run this program as super-user.
*-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet control
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:01:00.0
Logical name: eth0
Version: 03
Serial: d8:d3:85:28:a9:fb
Width: 64 bits
Clock: 33MHz
Capabilities: bus_master cap_list ethernet physical
Configuration: broadcast=yes driver=r8169 driverversion=2.3LK-NAPI ip=192.168.1.69 latency=0 multicast=yes
Resources: irq:31 ioport:2000(size=256) memory:b0404000-b0404fff(prefetchable) memory:b0400000-b0403fff(prefetchable)
*-network UNCLAIMED
description: Network controller
product: Broadcom Corporation
vendor: Broadcom Corporation
physical id: 0
Bus info: pci@0000:02:00.0
Version: 01
Width: 64 bits
Clock: 33MHz
Capabilities: bus_master cap_list
Configuration: latency=0
Resources: memory:b2400000-b2403fff