Networking :: Transfer The Audio File On Machine Using Ethernet Port?
Feb 25, 2010I want to transfer the audio file on linux machine using Ethernet port, is it possible?
View 6 Replies
ADVERTISEMENT
Networking :: File Transfer Using Ethernet Cross Over Cable?
Apr 18, 2010I am running Ubuntu Linux 9.10 on my laptop and desktop. I would like to transfer files from one to the other using an Ethernet Cross Over Cable. Is there software already installed in the bundle, that would allow me to setup network drives for each machine when the cable is connected. Also how would I setup the configuration.
View 10 Replies View RelatedNetworking :: Transfer Files From A Machine To A Windows Machine Which Are Not In The Same Network?
Jul 6, 2010I had run one script in unix machine and want to copy the results to a windows machineBoth the machines are on different networksIn linux machine trying to do the ftp to the windows machine its giving connection refused. How to chech whether ftp is running on that linux machine or not?Also tried scp and ssh , both are failing
View 6 Replies View RelatedNetworking :: Ethernet Port Connection With An E1/T1 Port
Aug 30, 2010i have an embbeded hardware that uses bootp for booting from a Network Managemnt Host (NMH)on the same ethernet. The embedded hardware has both kind of ports i.e ethernet as well as E1/T1. I would like ask, what do i require to establish a communication-link between the embedded hardware and the NMH throuh E1/T1 ports of embedded hardware, so as to make it boot through from E1/T1. Further, NMH possesses only ethernet port. Just to refine my questions i'd like to know what additions do i need to do on my NMH , like may be i have to put an E1/T1 port or is it possible that the E1/T1 port can be directly connected to an ethernet port on the other host.
pardon me if i am not making absolute sense here as my knowledge is limited on Layer 1 and layer 2.
Networking :: Transfer Rate For Gigabit Ethernet
Apr 1, 2010We have a Linux box which acts a a file server. Currently, files and directories are exported using NFS.At the moment, we are a bit concern on its data transfer performance. FYI, we are using a embedded Gigabit Ethernet port on the file server. We ran a few simple write tests between NFS client (also utilizes GigE port) and the NFS server. In these tests, both NFS server and client are both connected directly to each other with a Cat5E cable. Unfortunately, the write/transfer speed results are not as per our expectation. It scores roughly about 11-12MByte/s, where as theoretically Gigabit Ethernet transfer rate is able to reach up to approximately 120MByte/s.I wouldn't expect to reach the theoretical max transfer rate (it would be great if we can , but I would appreciate if you guys can share with us in terms of the following :
1) What's the practical max data transfer rate which you guys managed to observe in a normal Gigabit based connection? What about jumbo frames configuration?
2) Is there any additional tuning/configuration we need to do within the OS to reach those practical max data transfer rate figure?
3) Does PCI-e / system bus plays a role in achieving this speed? For example, we are using the embedded GigE port and we heard some people says embedded ports are actually sharing the system bus and resources with other devices, which might adds into performance issue. Correct me if I'm wrong.
4) Does converting to Cat6 cabling will guarantee an increase in the data transfer performance?
5) In the future (once we are clear on how much single GigE transfer rate we can go) , we are looking into doing bonding since that the NFS server's shared directory/volume read-write speed is way much higher (i.e 400-600MByte/s). Will bonding allow us to achieve higher NFS read/write speed? What are the bonding modes best used for this purposes? Appreciate if anybody who has experience in doing bonding for NFS can share their experience.
Networking :: Directing Packet From One Port To Another Port Of Another Machine
Apr 25, 2009How can i redirect data received on a port to another port located in a different machine? Can i do this using IPTABLES ?
View 4 Replies View RelatedUbuntu Networking :: Expected Transfer Rate For Gigabit Ethernet
Sep 26, 2010I have 2 10.04 machines connected through a switch, both with gigabit on board ethernet. Both machines show 1000 Mb/s connections.When I transfer large files (gig plus up to multi-gig) the maximum I get according to ftp 11472 kB/s.I did rough computer school math in my head and that seems low but I'll admit I know very little about network transfer rates.My question is what transfer rates should I expect to get between the 2?
View 9 Replies View RelatedGeneral :: Transfer File From Local Mac To Remote Machine
Aug 12, 2010How do you transfer a file from a local Mac to a remote Linux machine
View 5 Replies View RelatedGeneral :: Transfer File From System Machine To Windows?
Apr 9, 2010I want to make a script which will copy the certain data from Linux machine to Windows machine.
Can u please give me some help in how would i go about it?
Ubuntu Servers :: Shared Folders - Transfer File From Host Machine?
May 27, 2010I have ubuntu server as a guest in virtualbox and xubuntu as my host os. I have a shared folder on my host that can be accessed by my network. I'm trying to use my server without the need to install a desktop, so how would i transfer a file from my host machine to my ubuntu server guest?
View 5 Replies View RelatedFedora Networking :: No LAN Using Ethernet Port
Jul 29, 2010I can't figure this out for the life of me. I am new to Linux too. Wireless works fine. I plug my Ethernet in and turn off wireless and I cant surf the web, download, etc...Network Manager finds the wired network under eth0 and it works perfect on my non-linux desktop (nervous to even mention Vista around here). Firewall was set up with basic setup (I didn't make any changes). I have a Sony vaio VPCCW21FX with fedora 13. Can anyone point me in the right direction?
View 10 Replies View RelatedUbuntu Networking :: Ethernet Port Not Recognized?
Jul 27, 2011I am running 11.04 on a Dell Inspiron 1501 (the first gen.). I was using my Ethernet port to connect to the internet until about two weeks ago - suddenly the system no longer recognised that port even existed and just kicked me offline. I am able to get online now with a wireless card (replaced the broadcom card, that was a whole different can of worms...).
why my system is unable to connect with the Ethernet port? If I plug in the cable nothing happens.
Ubuntu Networking :: Bridging Wireless With Ethernet Port?
Apr 29, 2010I have a Dell Studio 1501 Laptop and I want to bridge the wireless with the ethernet port so I can hook my xbox360 to my laptop.
I've spent the last 2 hours trying different techniques but nothing is working.
I'm running Ubuntu 9.10 so the last thing I tried was going into the network manager, clicking on wired, editing the ethernet port and allowing it to share. This did nothing.
I tried to share the connect with firestarter but that did not work either.
Ubuntu Networking :: Usb Broadband Not Working (Ethernet Port Not Available)
Apr 20, 2011I am using ubuntu 9 but unable to connect to internet via my usb Siemens c110 modem. I have a dual boot system of both windows7 and ubuntu9. I am using the same modem in windows7 and have installed virtualbox where i have installed the same ubuntu9 but there it automatically detects the wired connection(usb)[eth0] but in the actual boot it doesnt detect anything. I have typed in the terminal sudo ppconfig but it was unable to find anything.
View 1 Replies View RelatedUbuntu Networking :: Sharing Internet Through Ethernet Port?
Jun 21, 2011I am running Ubuntu 11.04 and i am curious to if there is a way to share my established wireless connection through my Ethernet port.. I know it was possible in Windows by going to adapters and bridging the wireless, and Ethernet adapters. how to make this work in Ubuntu?
View 1 Replies View RelatedNetworking :: Dhclient Running On Disconnected Ethernet Port?
Nov 8, 2010I have a simple server running Ubuntu Server. Usually the server connects to the network by Wifi, so there is usually no cable connected to the Ethernet port. I noticed that there is a dhclient3 running on eth0 anyway. It is causing undesirable disk activity. Obviously, it is never going to get a response as long as no cable is connected. I can kill the responsible process manually, but I wonder first what is starting the process and how I can prevent it from being started. If there is a way to get the server to boot without starting this process, I wonder whether this is the right solution. Connecting to the network by Ethernet is the failsafe when Wifi doesn't work. I guess what I would like to see would be a way for the server to detect when eth0 does not have a cable connected and not start dhclient in that case, but to activate dhclient when a cable is connected.
View 4 Replies View RelatedCentOS 5 Networking :: How To Restrict Ethernet Port Speed
Jul 6, 2010I have a server in a colocation environment where I'm allotted 25Mbps. I'd like to avoid exceeding that for obvious reasons. Is there a way I can set the link speed or at least throttle the bandwidth for all services?
View 2 Replies View RelatedUbuntu Networking :: Can't Access Internet On 4 Port Ethernet Router
Mar 1, 2010I changed to a 4 port ethernet router (D-Link DSL-2542B Adsl2+)with intention to share Internet access with my brother (he's on Vista).Initially it all went well,but 3 days ago there were connection problems occured on the part of the ISP. Without realized the problem,I had reset the router.This morning I've been informed by the ISP that the connection has been re-established.So,I accessed the Internet via the 4 port router but failed to do so (server not found).Suspecting that the problem was from the 4 port router,I reverted to my old Adsl router (DSL-520B single port) and without any problem I managed to access the Internet back.I really need help to configure back the 4 port ethernet router to its initial state.
View 9 Replies View RelatedUbuntu Networking :: On-board Ethernet Port Not Detected - Have To Use PCI Card?
Jul 21, 2011I'm running an ubuntu maverick server, and I'm having a slight problem with networking. I've only got one ethernet line running into my room, and I've got loads of computers. The server has 2 ethernet ports, one integrated into the motherboard, one on a PCI card that I took from my old server. The on board ethernet never worked on my old server- but I only tried it out post-install, it was hooked up to the card during install (For the record, networking on linux has *never* worked for me if I installed then plugged in the networking stuff after the fact). So I just used the card instead. Transferred the hard drive into a new machine, and lo and behold, it would only work after I transferred in the card from the old one. What I wanted to set up is a basic NAT system, where the network connection is routed through from my server to my main desktop- but when I run ifconfig, my card is not detected, just lo and eth0. How can I fix this?
View 3 Replies View RelatedNetworking :: VMWare 2.0 Server - Ubuntu 10.04 Lucid And Ethernet Port ?
Aug 13, 2010I am using Ubuntu 10.04 Lucid and VMware 2.0 server. I have a an XP virtual machine that is needed for work. When I am at home and I place my cat 5 cable to my cisco catalyst switch, my XP VM recognizes the ethernet card on my laptop and bridges fine with ubuntu and works fine and I can get to my network. When I take my laptop to work and I go to a site and I plug it into a World Wide Packet 311 management port on the switch, my XP Virtual Machine does not see the network no matter what setting I set it too(100 full, 10 full, 10 half and etc). It simply says that the network card is disconnect. Ubuntu see the network fine and I can ping and talk to the network without any issues but the VM does not.
View 2 Replies View RelatedUbuntu Networking :: Bridging Ethernet Ports & Keeping Static IP On One Port
Mar 11, 2010I'm currently using Ubuntu 9.1, and a motherboard which has two Ethernet ports on it.
What I would like to do is bridge these ports, so I can plug in another Ethernet cable and run it to an unmanaged switch in my room (handy for my work laptop when on-call and building other PCs, etc).
I.e. Router --> 8-Port Switch --> My PC.
Eth 0 --> 192.168.1.100 static
Eth 1 --> 5-Port Switch --> DHCP
I believe this is the config to make the ports bridged:
ifconfig Eth0 0.0.0.0
ifconfig Eth1 0.0.0.0
brctl addbr Bridge0
brctl addif Bridge0 Eth0
brctl addif Bridge0 Eth1
ifconfig Bridge0 up
- How do I save this so upon reboot it sticks?
- How do I force Eth0 to remain as a static IP of 192.168.1.100?
Ubuntu Networking :: Dell WLAN Card - Ethernet Port Does Work
Jul 28, 2010I have a Dell WLAN 1397 Half Minicard, 802.11 b/g card in my laptop, and I can't seem to get ubuntu to work with it. I tried this method:
1. Synaptic Pack Manager
2. Check "Install from Boot Disc"
3. Reload
4. Install and apply bcmwl-kernel-source
5. Reboot
This didn't work for me, so I tried entering sudo apt-get install bcmwl-kernel-source and that also didn't work. Another thing I tried is formatting my Ubuntu partition and reinstalling, and retrying both of those methods. The ethernet port does work, however.
General :: RSYNC Error .tar.gz 14gb File / Transfer Huge 14 Gb File Over Network,vpn,wan Transfer?
Mar 10, 2010i am trying to transfer a file from my live linux machine to remote linux machine it is a mail server and single .tar.gz file include all data. but during transfer it stop working. how can i work and trouble shooot the matter. is there any better way then this to transfer huge 14 gb file over network,vpn,wan transfer. the speed is 1mbps,rest of the file it copy it.
rsync -avz --stats bkup_1.tar.gz root@10.1.1.22:/var/opt/bkup
[root@sa1 logs_os_backup]# less remote.log
Wed Mar 10 09:12:01 AST 2010
building file list ... done
bkup_1.tar.gz
deflate on token returned 0 (87164 bytes left)
rsync error: error in rsync protocol data stream (code 12) at token.c(274)
building file list ... done
code....
Ubuntu Networking :: Ethernet Port Isn't Showing Up Under Ifconfig - Install Additional Drivers?
May 20, 2010I recently installed a new CPU and motherboard in my Media Server, but the ethernet port isn't showing up under ifconfig. Is there any way to install additional drivers? EDIT: The model is Realtek RTL8111/8160B.
View 3 Replies View RelatedUbuntu Networking :: Ethernet Lan Port On The Computer Seems To Not Be Activiating As No Wired Connection Is Recognized
Oct 6, 2010while my brother was browsing the web on my windows partition he had a blue screen pop up, one of the soft/hardware error ones, not a true BSOD, anyways, ever since my lan port on the computer seems to not be activiating as no wired connection is recognized. The lan port/card is directly attached to the Mother Board, it's a gigabyte motherboard in a self-build computer. I'm just wondering if there's anything I can do to troubleshoot this and see if it is truly a hardware problem or if its something else.
View 9 Replies View RelatedGeneral :: Transfer Files On A Machine With Ftp / Sftp And Scp Disabled Onto A Remote Machine?
Nov 30, 2010How do you transfer files on a Linux machine with ftp,sftp and scp disabled onto a remote machine
View 2 Replies View RelatedNetworking :: Unable To Enable Ethernet On Recycled HP Pavilion Win98 Machine
Oct 28, 2010After reading about Linux I decided to try it on an old HP Pavilion model 6617 desktop running Win 98 - so far with limited success!
View 10 Replies View RelatedNetworking :: Port Redirection In Same Machine
Mar 29, 2009I am using squid proxy server in my Linux machine for caching. Now i want run my squid in transparent mode not set proxy settings in browsers.Like squid is running port 3128. If we redirect the port 80 packets to port 3128, looping is occurred.How to avoid looping?
View 5 Replies View RelatedNetworking :: Can't Login To The Port On The Local Machine?
Feb 28, 2010I have a reverse ssh connection established from a remote machine to my local machine - it is established with autossh from the remote machine - I know it is connecting because I can see the two ssh processes on the local machine - and, when I kill the two ssh processes, two new ssh processes are immediately established. But I cannot login to the port on the local machine. I have tried everything - it simply refuses to connect. This remote machine is miles away and not readily accessible.
Code:
ssh -p 7766 -vvv user[at_sign]192.168.1.108
OpenSSH_5.1p1 Debian-6ubuntu2, OpenSSL 0.9.8g 19 Oct 2007
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
[Code]...
I'm wondering if there is some way I could utilize netcat or socat to "tap into" this connection from my local machine??? (My ultimate goal would be to get to a shell on the remote machine.)
Ubuntu Networking :: Redirect Port 25 To A Remote Machine Via A VPN Connection
Feb 19, 2011I have had a look at the the information on the ubuntu forum about this but am having trouble getting the server to do what i want it to do.
I have a VPS running ubuntu 9.10 and i am trying to set it up to redirect port 25 to a remote machine via a VPN connection (remote machine connected via VPN)
i have tried setting this up in the firewall using webmin but it is not working.