I have dual boot system and on windows I am able to connect to wireless but on Ubuntu I am not able to connect to wireless.
I desire to learn to trouble shoot the problem my self hence I would appreciate if some one guides me How to look for the problem.
and how to find what is wrong and right
That is why I am not posting any output here but rather would like to learn to solve the problem by myself
I recently installed Ubuntu 9.10 on my Dell Inspiron 1545 64-bit laptop. Before that I used Windows7. In Windows, the internet connection worked perfectly well. But after installing Ubuntu, I am unable to connect to the internet. The network-manager applet finally says that "You are disconnected". When I do the "ifconfig", I got no IP address.
So, I installed Ubuntu 9.04 in the same system. But the problem persists.
I gone through many posts in this forum but nothing was useful.
Ubuntu 10.10
AT@T
DSL
Wireless
2WIRE modem
i cannot connect to the web with the above services. Even when it says "connection established" it still would not work. there is always a lock next to the server name.
I don't know if i should of put this in either Networking or Dell Forum. But here goes. I have a Dell Studio 1535 Laptop, and i have downloaded the new ubuntu 10.04
The problem is, is that i cannot get a internet connection. On my laptop there is a wifi sign that lights up if it works, and it didnt when i booted it. So i thought i have the driver downloaded and i tried to install it and it installed but after it crashes, so that failed. And then i tried via Ethernet and it does not connect when i connect it to the router!. It just says disconnected everytime .
I have tried to reboot, just incase it was a bad boot or something, and i stil get the same. It just will not connect to the internet
I can't connect to the Internet using firefox in F14. bu I have received update notices presumably from the internet in gnome.
View 2 Replies View RelatedI'm trying to establish a connection to my ISP which uses PPTP protocol and a VPN server. The deivce I got from my ISP is a modem, not a router. The problem is my computer is unable to communicate with the ISP VPN server.
P.S Here are the instructions for Windows XP which work: http://portal.bnet.hr/ZG/windows-xp.htm
Here's what I have done so far code...
I reported recently that I have a problem connecting to a Windows network, and someone suggested upgrading to Ubuntu 10.4 I have done, and still have the problem.
The error message I get is: "Unable to mount location. Failed to retrieve share list from server".
I have setup an OpenVPN server on my server box, it had been working perfectly until today. It operates on port 1194 which I am now unable to connect to (tried telnet). I have checked all the firewall rules and they still allow the port and I have also checked to ensure that OpenVPN is still listening to the port, which it's not but I have tried restarting the service and the box which dosent make any difference. The only thing that has changed is that yesterday I installed Openfire, could this have broken something?
View 1 Replies View RelatedI am trying to setup a dhcp server for my internal network. I have two NICs, a modem, and a wireless router. I have my server connected directly to my modem which is providing me with Internet access on eth1 and is working fine. I have dhcp and dns setup on eth0 which is connected to my router. The router shows that it is connected to the Internet but when the router gives a client computer an IP address, the client is unable to connect to the Internet but can connect to the router. I will post my configuration files below with my current configuration.
[Code]....
I am unable to connect to my wireless network. When I click on Network manager it says under wireless "device not managed".
View 9 Replies View RelatedI'm running ubuntu 9.10 on my desktop.Wireless networks appear on the dropdown menu but when I try to connect to my home network the authentication box appears, after typing my password the box disappears and it continues to connect but nothing happens and after a while the authentication box appears again. So.. no internetz connected.
View 7 Replies View RelatedI have this very weird problem: I'm not able to SSH to 1 specific server on the web. I can access everything, but not that specific server.
When I try to SSH, I get this code...
When I reboot to Windows, I can SSH using Cygwin. I'm using Ubuntu 10.04 Lucid and OpenSSH client 1:5.3p1-3ubuntu6.
I tried sniffing the network with Wireshark, but I cannot understand why the TCP connection cannot be set up. I'm sure it's an Ubuntu problem as I'm able to connect to that server on the same machine, but different OS.
Currently I have an Acer Aspire One netbook with Windows XP on it. I want to switch to Ubuntu, so I have the OS on a flash drive and I can run it fine. The only problem is,I cant see any wireless networks in range. I know the router is working because I can connect with Windows fine. A notification also pops up telling me i have to install missing drivers. But when i click on install, the progress gets to 99% and fails. It says i need the Broadcom B43 driver, but i don't know how to get it.
View 8 Replies View RelatedI've been trying for 3 days now, gone to a couple of ubuntu sites, asked some friends who unfortunately don't have the time to assist me, and gone through several forum responses on here to try to find the solution to my problem.The problem is my inability to connect to my wireless network. I have a linksys USB device for my wireless, and the wireless router is literally right next door to my room. I am able to find my router and my neighbor's router from my computer. However I can not connect to my router. It is WPA enabled, and I have the correct password. It is just unable to connect to the network, it tries for a few minutes then doesn't connect at all and says wireless network disconnected. I am currently hooked up to an unsecured wireless network, but I can't connect to the internet. I am using firefox, but it doesn't seem to connect to any site I try.
Here is the lspci
Code:
captain@The-Ship-Of-Capn-Alex:~$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8375 [KM266/KL266] Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
[code]....
and when I ping I type in [URL] in the terminal and all that comes up is
Code:
ping: unknown host [URL]
I use Hasee L141 notebook and ever since I installed ubuntu, my internet connection using both wire and wireless does not work but for the windows it works alright. I asked friends to help me but it yielded no result. Is there anything that I'm missing? I re-installed it several times but still had the same problems.Someone please help me. I even tried installing using the wubi.exe but still the same problem.
View 9 Replies View RelatedI have a new laptop with me and I am unable to connect to internet from It. i have a wireless router with WLAN connection. I am able to connect from windows 7 But in ubuntu the network manager doesnt show any WLAN connections at all.. I am a newbie and dont know how to start debugging this Issue. I may like to know,
1. How to ensure that my linux distro has detected network card on my system as the first step
2.Then how to make the wireless connection UP and running.
I have been using Windows XP, and last month i had Linux Mint installed. I was connecting to the internet with an external modem and everything was running fine, until while experimenting with the settings,i bust the whole thing. What i did was to do a "right click" on the 'computer icon' at the bottom right-hand corner to disconnect and from that day i am unable to connect from Linux, but i can still do it under Windows.I had done the same thing under Windows but after going to the 'control panel/network settings' i managed to get the thing working.I went to the 'control panel' in Linux, and under 'network ' i get the message: "Auto eth0 => never". i have been trying to 'edit' the 'settings'
View 2 Replies View RelatedJust purchased a Dell Inspiron 580 MT tower pc with Windows Professional. However unable to connect to the network or the internet when I load a copy of Ubuntu Karmic on dual boot. Windows networking and internet working fine. Is this an ethernet adaptor hardware issue? Broadcom NetXtreme 10/100/1000 Gigabit Ethernet controller-PCI Express card Will try later connecting through a usb ethernet adaptor to see if this is really the problem.
View 2 Replies View RelatedI am unable to connect to internet using my wifi network. Though I can share folders on network. Here are the details:
HP Pavalion laptop - DV6149us
lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
[Code]....
I cant connect to the internet wirelessly or with a RJ45 connection. Last week my son came round and thought it was very call the internet worked fine then. Then he downloaded a programme called wireshark. Since the installation of that programme there has been no internet. Even the internet icon on the top bar has gone Aswell as the network manager section has vanished from the preferences menu. I have uninstalled wireshark thinking it will correct its self but havent had much luck. I am running Ubuntu 10.4 (lucid) Kenel Linux 2.6.32-generic GNOME 2.30.2
View 9 Replies View RelatedI have a multiboot system running several versions of linux which do not all use the same software for handling wifi connections or have the same kernel. They have all stopped being able to connect to the internet in the last few days. My Windows 7 set up still connects though it seems to be a slow to establish a connection.Could BT have changed something and if so what?
View 4 Replies View RelatedI installed Ubuntu 11.04 and am unable to connect to wireless internet. I looked under additional drivers and there doesn't seem to be anything listed there.
View 3 Replies View RelatedI have a Samsung netbook with a built in hspa modem. I would like to create a wireless connection to my iphone so that i may share the internet connection. The iphone however picks up the network but is unable to connect to the internet.I am running 10.10. Can anyone please help as I have trie dto find a soln to this problem.
View 1 Replies View RelatedI have installed Fedora 10 on my Intel system. I am not able to connect to internet from it. Mine is a broadband connection with ADSL+2 modem. I could connect once but afterwards it was deactivated and I got following bug report.
Component: system-config-network
Version: 1.5.93
Summary: TBd036c2a6 re.py:237:_compile:TypeError: first argument must be string or compiled pattern
Traceback (most recent call last):
File "/usr/share/system-config-network/netconfpkg/gui/tonline.py", line 79, in on_generic_entry_insert_text
if re.match(str, text):
File "/usr/lib/python2.5/re.py", line 137, in match
[Code]...
Trying to connect to internet. by doing service network restart getting msg "3c501 device etho does not seem to be present, delaying initialization". On running command lspci |grep -i ethernet, getting following info ethernet controller- Realtek semiconductor Ltd.unknown device 8136 (rev 01) subsystem- Gigabyte On running command cat /etc/modrobe.conf, getting the following info
alias usb-controller ehci-hcd
alias usb-controller1 uhci-hcd
alias eth0 3c501
The server connects fine, I can load pages, FTP in, etc. So everything seems good on that end. When I try to use the internet from the Ubuntu box, however, it doesn't seem to want to connect. The internet won't load through firefox, and attempting to update through the repository won't connect. I've tried playing around with refreshing the connection and rebooting and such, but nothing seems to be fixing this. I can't think of what the issue may be as the connection is working, as I can get on the server, but can't seem to get it to connect outward from the actual box.
View 5 Replies View RelatedI am unable to connect to the Internet in lucid via a proxy server using apt-get or synaptic. Opera & firefox connects to the internet fine with the proxy setting.
I have tried the following solutions:
1) set proxy setting using systems|preferences|network proxy
2) editing ~/.bashrc & /etc/.bashrc
3) creating a /etc/apt/apt.conf file.
4) putting the proxy setting in synaptic
For the proxy setting I have used the both the verbose name as well as the ip address. There is no logon requirements for the proxy server. Either formats work in the browsers.
I have Ubuntu Server 10.10 installed which is guest OS on a XP host. The problem is I cannot connect to the internet. I am using bridged network but still it fails to connect. what configuration should I change in VMWare or should I have to modify anything in XP.
View 1 Replies View RelatedI use Windows7 on my laptop. I have got the following version of VMware Server installed on it.
**VMware Infrastructure Web Access Version 2.0.0 Build 122589**
**VMware Server Version 2.0.0 Build 122956**
I am running Fedora Core 10 on VMware, but Fedora is not able to connect to the Internet. However, when I try to ping google.com, it works fine. However, if I try to open google.com in mozilla-firefox, it gets stuck at "Connecting to google.com" and then finally times out. Similarly, yum also gets stuck.
Logs
[root@prats ~]# ifconfig .....
[Errno 4] IOError: <urlopen error (101, 'Network is unreachable')>
Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora. Please verify its path and try again
You have mail in /var/spool/mail/root
[root@prats ~]#
// Prats
I recently installed Ubuntu 9.10. I was unable to connect to the Internet with Firefox or to download packets using command line or Synaptic Package Manager, or run updates. I disabled IPv6 in Firefox and am now able to browse, but I still cannot connect to repositories, I cannot download packages, I cannot run updates either.
View 3 Replies View Related
