Networking :: Squid3 Access Log Hostname ?
Feb 3, 2010
I have Squid3 running and SARG for producing report. I would like to see the hostname being logged in the access.log file instead of the client IP address. I have already set the option log_fqdn=on and it doesn't do it. I still see the client IPs in access.log files...
View 4 Replies
ADVERTISEMENT
Oct 21, 2010
I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines
Code:
And
Code:
eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT:
Code:
Code:
But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?
View 1 Replies
View Related
Apr 13, 2010
Right now my setup is as follows: I have an Asus Eeepc 900 running Netbook Remix named eeepc, and a media centre running 64-bit Ubuntu named media.When I try to ping or ssh into one machine from the other, for exampleCode:$ ping mediaI get an "unknown host name" error. However, pinging the device's IP address works. How do I get the computers to recognize each other's host names? Did I miss something in the setup?
View 2 Replies
View Related
Sep 17, 2010
I've completed the installation of a CentOS server.Running the setup utility as root, ive set up a static IP and installed apache. Now this works ok. I can type in the servers IP address from my browser/putty/winSCP and access the server within the intranet. The problem is that i would also like to access the server using its hostname, e.g. http://centos or whatever Currently i cannot do it. I've searched the forums, edited the /etc/sysconfig/network and /etc/hosts to no avail no matter what i do i cannot access it. i've disabled some services so im not sure if this is the fault.
View 1 Replies
View Related
Oct 23, 2009
At school can connect to my computer via SMB/Samba and VNC from the Windows Machines, but not by hostname (I still cannot VNC in at home on my desktop computer and have yet to try Samba there because I wanna setup Samba there from the comfort of my laptop and therefore need VNC first). How come I cannot access this machine by it's hostname?
View 4 Replies
View Related
Aug 16, 2011
The details of "how to access externally with hostname instead of IPAddress in fedora"
View 1 Replies
View Related
Jan 31, 2011
I am using samba version 3 (probably), and the problem is that the linux based nas can only be accessed via its ip 192.168.x.x but not its hostname /server string appointed by the smb.conf file:
Code:
[global]
netbios name = NAS
server string = NAS
smb passwd file = /etc/smbpasswd
[Code]....
View 3 Replies
View Related
Mar 17, 2011
i have successfully set up squid3 with squeeze using guide on this forum viewtopic.php?f=16&t=59301 . The only problem that i have is the size of /var/log/access.log is too big and keep increasing so i run out of free space. The size of it always the same size as my free space hard disk (so it make me run out of free space in just one day, it can have size to 30 Gb ) right now , the only workaround i make is using crontab to rm access.log every hour . I'm sure this is not the right solution . Does anybody know the correct workaround about this ? I have searching in google but seems havent yet have luck with this .
View 5 Replies
View Related
Jan 3, 2010
I have a network of 2 WinXP machines and one linux box. I have fiddled around with the settings as you do when learning. The network is working. The network neighbourhood on the WinXP machines recognise the linux box and vice versa, (the linux Places|Network recognises the 2 WinXP). I can Ping the linux box using its hostname from a WinXp. But I cannot do the reverse. I get an 'unknown host' response. I can ping the linux to itself using its hostname.
View 7 Replies
View Related
Jul 29, 2010
I'm having an issue on two Fedora Core 13 machines where I can ping others by hostname, but the hostname resolution fails whenever I use ssh/scp/vnc/etc. I can still do these things by IP address, just not by hostname. RHEL5.3 machines on the same network with the same configuration do not seem to have this problem.
Here's the not-so-quick-and-dirty description of the situation:
I know that there is a virtual router at 192.168.31.1 and another at 192.168.30.1. I also know that there is another network (let's call it 90.90.90.0) and on that network lies a number of resources. By nature of this configuration, any machine on 90.90.90.0 can be accessed by any 192.168.x.x, but not the other way around. Beyond that is out of my hands and currently out of my scope of knowledge.
I have a dnsmasq server on 90.90.90.10 that operates as a secondary nameserver, another machine out of my sphere of influence is the primary nameserver (90.90.90.31).
The secondary nameserver on 90.90.90.10 holds the hostnames of our development machines. The problem is that in some cases, while I can ping by hostname all day long, services such as ssh, scp, vncviewer, etc all fail to resolve the hostname. In other cases I can do all of these things.
Every machine has an equivalent resolv.conf:
As an example, I will show the output of a handful of my development machines:
I also included columbia as a one-way test -- even though it cannot access 30.x or 31.x, they can access it:
columbia -- physical machine, Red Hat Enterprise 5.3, IP 192.168.100.200
Okay, so here are the various outputs. Remember, nibbler, discovery, and atlantis can ALL:
- Ping by IP address
- Ping by hostname
- ssh, scp, vnc, etc by IP addess
Additionally, the SERVFAIL reply from 90.90.90.31 is expected since my dnsmasq server is on the secondary server.
Note that the only machine that can both ping and ssh/scp/etc by hostname is nibbler, which also happens to be the only one of the three running RHEL5.3 instead of FC13. Other virtual and physical machines running on the 192.168.31.0 and 192.168.30.0 networks (all running RHEL5.3) work just like nibbler does. So the problem seems to only affect machines running FC13.
Final note: selinux is disabled, iptables is disabled, ip6tables is disabled.
Other than that, discovery is a brand-spanking-new install straight off of the FC13 DVD. atlantis has been around longer, but its just a file server so I haven't done anything too crazy to it.
View 3 Replies
View Related
May 24, 2010
I'm trying to ping another Ubuntu computer on my local network. If I try doing,ping <hostname>then I get the messageping: unknown host <hostname>however, if I doping <hostname>.localthen I get a response back. I was wondering how I can change it so that I can ping without having to append .localI've installed winbind and modified my /etc/nsswitch.conf file but this has made no difference.
View 2 Replies
View Related
May 22, 2011
I have an ubuntu 10.04 server with hostname "abc.domain.com". However, due to migration, we had to change to hostname to something else, "xyz".
I have done changing /etc/hosts and /etc/hostname and run /etc/init.d/hostname start.
Checking the hostname and all shows it is now using hostsname of xyz. However, email sending out is still using old hostname. We have some scripts that will send out alerts like failed rsync or hdd space full to my email account. But I see the sender is still "root@abc.domain.com".
How do change that to xyz? I am using postfix. I have edited main.cf and restarted postfix but no go.
View 1 Replies
View Related
Mar 12, 2011
My home LAN (6 computers) is connected to a Dlink 624 router (192.168.0.1). All machines have DHCP addresses exception of the Ubuntu 10.10 box which has 2 NICs (192.168.0.198 and 192.168.0.199) with static IPs.
I've been spending hours reading stuff on Squid3 and I can't make it work, the client computers won't connect to the Internet.
What I'd like to do is a simple Squid proxy to cache the websites I access the most.
Would someone have in hand a squid.conf file compatible with my needs or suggest me another proxy product (with a GUI if possible,)?
View 2 Replies
View Related
Sep 29, 2010
i'am trying to configure Squid3 et SquidGuard on ubuntu Server 10.04 for a school. I'm new in linux, before i post this thread, I searched in the french forum and www. I found nothing to help me to resolve this issue. You can see below to configuration file from Squid3. which is stored in /etc/squid3/
[Code]...
View 1 Replies
View Related
May 20, 2010
I have squid3 proxy and I want to define a default start web site that will be opened force only one time. Is something like it possible?
View 4 Replies
View Related
Apr 20, 2010
On my Linux boxes, I can access another machine using hostname.local as the address. How can I do something similar from Windows (XP)?
View 2 Replies
View Related
Mar 13, 2011
why cant I access samba share by short-hostname from win7.when I ping short-hostname, the answer is the actual ip and short-hostname.mydomain.com pinging short-hostname does work, but accessing it from start-run does not! accessing by ip or short-hostname.mydomain.com works fine.ssh by short-hostname from win7 works fine too.
View 2 Replies
View Related
Mar 13, 2011
Running samba-3.5.6-71.fc14.x86_64. Why cant I access samba share by short-hostname from win7. When I ping short-hostname, the answer is the actual ip and short-hostname.mydomain.com
sa pinging short-hostname does work, but accessing it from start-run does not! Accessing by ip or short-hostname.mydomain.com works fine. ssh by short-hostname from win7 works fine too.
View 14 Replies
View Related
Apr 30, 2010
I got my server set up with 10.04, and with everything installed: DHCP, SSH, Samba, VBox, etc.
DHCP, SSH work fine, but I am having problems where I cannot ping the hostname of the machine.
It worked for a few minutes after I got everything installed and now it's not letting me connect via hostname. I can connect fine if I use the IP address. I cannot ping the machine by hostname unless I add it's IP address to the hosts file.
View 7 Replies
View Related
Sep 20, 2010
I just built an AMD Phenom II Six Core with 4 Gigs Ram a 160Gib / and swap, and (2) Two Tb mirror for Raid (data storage) I had been using DMRAID in the deprecated box but this box has MDADM v3.1.4 - 31st August 2010 from source (on MDADM wikipedia).
I have no permission problems with using the raid and dmraid is un-installed. The raid is working perfectly and is mounted in my fstab with ext4 defaults 0 2 as my options.
I have two exports
/media/raid/Test
/test
Both show IP and subnet on the showmount -e for the server. I can mount the test just fine on the server. I cannot, however, mount the /media/raid/Test error: mount.nfs: access denied by server while mounting hostname:/media/raid/Test Using dmraid I am able to have the deprecated box export and mount nfs shares from the raid but using MDADM on the new computer, I cannot. I get similar results with pointing MYSQL's data folder to a location on the "/media/raid/Database" (even with apparmor entries).
View 1 Replies
View Related
Apr 13, 2011
I have installed Ubuntu on four machines at work and have been blown away. On my machine I have Apache setup for web development and other machines can "see" it using my IP address. I would like to have it so they can access by the name of my computer though. I have no local DNS server so I guess I need to hard code the relationship in each machine? Ideally I'd actually like to be able to use subdomains (which I use locally to avoid annoying .htaccess path problems). i.e. from another machine on the network to go to [URL].
View 3 Replies
View Related
Feb 8, 2010
I am sure this information is out there somewhere, but Googling apache access.log and hostname does not give you any good leads... so I hope someone here might be able to provide me with a quick answer...I am setting up a cluster of web servers, so I would like to name the access.log and error.log with the hostname of the individual servers to be able to distinguish one from another.
View 4 Replies
View Related
Apr 6, 2010
How do I set $HOSTNAME to dynamically update with the hostname that is specified for the ip in DNS?
View 3 Replies
View Related
Jan 21, 2010
the difference between $HOSTNAME and $(hostname)?
View 5 Replies
View Related
Mar 2, 2010
how to allow a specific hostname with specific ports in iptables?
View 1 Replies
View Related
Jul 16, 2010
I have a Fedora 13 desktop I have at work that I want to use to back up data off my laptop, also running Fedora 13. I can ping the hostname of the laptop from the desktop, but not the other way round. I don't think I did anything to have the laptop register its hostname with the DNS server. Since my company uses DHCP, I can't just edit the hosts file on the laptop. I want to be able to use the hostname when I mount the NFS shares for the backup. I also want to run the desktop headless so Remote Desktop needs to be able to find it. Is there a way to force the registration? If I ping the laptop's fully qualified hostname from itself, I get back the correct IP address. If I do the same thing on the desktop, it tells me it can't find its own hostname. I do have the domain name configured in the dns search path under System->Administration-Network
View 1 Replies
View Related
Feb 1, 2010
Running Fedora 11.
Did get a Kimsufi dedicated server through [URL] When I did get it the hostname resolve does not work.
I have never got any of this problems before so this is my first time playing with the network settings.
Nothing works! Lynx, wget, yum and so on. IT works if I do enter the hostname by its IP. But thats not working in the long way
Quote:
ping cnn.com
ping: unknown host cnn.com
Quote:
#nslookup cnn.com
Server: 127.0.0.1
Address: 127.0.0.1#53
[Code].....
View 2 Replies
View Related
Nov 13, 2010
When I use Ubuntu, my DSL modem correctly gets the hostname I call my computer "mertensia", but I'm having issues with Fedora. Yet, when I look at the name assigned by the modem (using URL... in a web browser),I need the PC Name to be mertensia, because otherwise it will complicate how I ssh immensely.
View 4 Replies
View Related
Jul 3, 2011
I have 4 installations of Fedora 14 running on a Win 2008 R2 server in Hyper-V.
When I try to ping my desktop or the host server via the hostname from within any of the Fedora installations, the ping fails. I can ping by IP without issue. Also if I try to ping the VMs from my desktop it fails. I have an XP VM setup that I can ping without issue via hostname and IP.
All of the VMs can access the Internet without issue. I have disabled all firewalls on all systems with no luck. My desktop can ping the Hyper-V server without issue so it would appear that the problem lies with the Fedora installations.
My resolv.conf
Code:
Does anyone have anything I can try to get the name resolution working?
View 4 Replies
View Related
Jul 19, 2010
I just finished installing ubuntu server 9.10 - fairly new. I couldn't run SSH when I use IP address of the server. I've also setup DynDNS that returns responses when I ping. SSH works fine when I use the hostname of my server (leopard) but SSH doesn't work when I use IP.I was expecting IP for "eth0" something starting with 192.168.x.x as are my other computers running WIN on the same network.Any ideas why
1) Why am I not able to run SSH from IP assigned to server by DHCP. It works when I use machine hostname (leopard)
2) Why SSH isn't working from DynDNS web hostname when it responses back the ping command.
View 6 Replies
View Related