Networking :: Allow Hostname In Iptables?
Mar 2, 2010how to allow a specific hostname with specific ports in iptables?
View 1 Replies
ADVERTISEMENT
Networking :: Https://hostname:8834/ Is Blocked By Iptables?
Jul 22, 2010https://hostname:8834/ is blocked by iptables ?
I have nessus application is running in the target machine and the url
is https://hostname:8834/ - which is not accessible
But when i login in the target machine via ssh and check that this application and the service is running fine So i think it is blocked by the iptables in the same machine, where the nessus is running
find the iptables status when iptables -L
iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
RH-Firewall-1-INPUT all -- anywhere anywhere
ACCEPT tcp -- anywhere anywhere tcp dpt:nessus1
ACCEPT tcp -- anywhere anywhere tcp dpt:nessus1
[Code].....
General :: Ubuntu 9.10 Networking Hostname / Can Ping The Linux Box Using Its Hostname From A WinXp. But Cannot Do The Reverse?
Jan 3, 2010I have a network of 2 WinXP machines and one linux box. I have fiddled around with the settings as you do when learning. The network is working. The network neighbourhood on the WinXP machines recognise the linux box and vice versa, (the linux Places|Network recognises the 2 WinXP). I can Ping the linux box using its hostname from a WinXp. But I cannot do the reverse. I get an 'unknown host' response. I can ping the linux to itself using its hostname.
View 7 Replies View RelatedNetworking :: FC13 Install Can Ping By Hostname - Ssh By Hostname Fails
Jul 29, 2010I'm having an issue on two Fedora Core 13 machines where I can ping others by hostname, but the hostname resolution fails whenever I use ssh/scp/vnc/etc. I can still do these things by IP address, just not by hostname. RHEL5.3 machines on the same network with the same configuration do not seem to have this problem.
Here's the not-so-quick-and-dirty description of the situation:
I know that there is a virtual router at 192.168.31.1 and another at 192.168.30.1. I also know that there is another network (let's call it 90.90.90.0) and on that network lies a number of resources. By nature of this configuration, any machine on 90.90.90.0 can be accessed by any 192.168.x.x, but not the other way around. Beyond that is out of my hands and currently out of my scope of knowledge.
I have a dnsmasq server on 90.90.90.10 that operates as a secondary nameserver, another machine out of my sphere of influence is the primary nameserver (90.90.90.31).
The secondary nameserver on 90.90.90.10 holds the hostnames of our development machines. The problem is that in some cases, while I can ping by hostname all day long, services such as ssh, scp, vncviewer, etc all fail to resolve the hostname. In other cases I can do all of these things.
Every machine has an equivalent resolv.conf:
As an example, I will show the output of a handful of my development machines:
I also included columbia as a one-way test -- even though it cannot access 30.x or 31.x, they can access it:
columbia -- physical machine, Red Hat Enterprise 5.3, IP 192.168.100.200
Okay, so here are the various outputs. Remember, nibbler, discovery, and atlantis can ALL:
- Ping by IP address
- Ping by hostname
- ssh, scp, vnc, etc by IP addess
Additionally, the SERVFAIL reply from 90.90.90.31 is expected since my dnsmasq server is on the secondary server.
Note that the only machine that can both ping and ssh/scp/etc by hostname is nibbler, which also happens to be the only one of the three running RHEL5.3 instead of FC13. Other virtual and physical machines running on the 192.168.31.0 and 192.168.30.0 networks (all running RHEL5.3) work just like nibbler does. So the problem seems to only affect machines running FC13.
Final note: selinux is disabled, iptables is disabled, ip6tables is disabled.
Other than that, discovery is a brand-spanking-new install straight off of the FC13 DVD. atlantis has been around longer, but its just a file server so I haven't done anything too crazy to it.
Ubuntu Networking :: Pinging Hostname Rather Than Hostname.local?
May 24, 2010I'm trying to ping another Ubuntu computer on my local network. If I try doing,ping <hostname>then I get the messageping: unknown host <hostname>however, if I doping <hostname>.localthen I get a response back. I was wondering how I can change it so that I can ping without having to append .localI've installed winbind and modified my /etc/nsswitch.conf file but this has made no difference.
View 2 Replies View RelatedUbuntu Networking :: Hostname Changed But Email Still Using Old Hostname?
May 22, 2011I have an ubuntu 10.04 server with hostname "abc.domain.com". However, due to migration, we had to change to hostname to something else, "xyz".
I have done changing /etc/hosts and /etc/hostname and run /etc/init.d/hostname start.
Checking the hostname and all shows it is now using hostsname of xyz. However, email sending out is still using old hostname. We have some scripts that will send out alerts like failed rsync or hdd space full to my email account. But I see the sender is still "root@abc.domain.com".
How do change that to xyz? I am using postfix. I have edited main.cf and restarted postfix but no go.
OpenSUSE Install :: Set $HOSTNAME To Dynamically Update With The Hostname That Is Specified For The Ip In DNS?
Apr 6, 2010How do I set $HOSTNAME to dynamically update with the hostname that is specified for the ip in DNS?
View 3 Replies View RelatedGeneral :: Difference Between $HOSTNAME And $(hostname)
Jan 21, 2010the difference between $HOSTNAME and $(hostname)?
View 5 Replies View RelatedNetworking :: Registering Hostname In DNS?
Jul 16, 2010I have a Fedora 13 desktop I have at work that I want to use to back up data off my laptop, also running Fedora 13. I can ping the hostname of the laptop from the desktop, but not the other way round. I don't think I did anything to have the laptop register its hostname with the DNS server. Since my company uses DHCP, I can't just edit the hosts file on the laptop. I want to be able to use the hostname when I mount the NFS shares for the backup. I also want to run the desktop headless so Remote Desktop needs to be able to find it. Is there a way to force the registration? If I ping the laptop's fully qualified hostname from itself, I get back the correct IP address. If I do the same thing on the desktop, it tells me it can't find its own hostname. I do have the domain name configured in the dns search path under System->Administration-Network
View 1 Replies View RelatedFedora Networking :: Hostname Cannot Be Resolved
Feb 1, 2010Running Fedora 11.
Did get a Kimsufi dedicated server through [URL] When I did get it the hostname resolve does not work.
I have never got any of this problems before so this is my first time playing with the network settings.
Nothing works! Lynx, wget, yum and so on. IT works if I do enter the hostname by its IP. But thats not working in the long way
Quote:
ping cnn.com
ping: unknown host cnn.com
Quote:
#nslookup cnn.com
Server: 127.0.0.1
Address: 127.0.0.1#53
[Code].....
Fedora Networking :: DSL Modem PC Name Is Not Hostname
Nov 13, 2010When I use Ubuntu, my DSL modem correctly gets the hostname I call my computer "mertensia", but I'm having issues with Fedora. Yet, when I look at the name assigned by the modem (using URL... in a web browser),I need the PC Name to be mertensia, because otherwise it will complicate how I ssh immensely.
View 4 Replies View RelatedFedora Networking :: Cannot Ping By Hostname On 14
Jul 3, 2011I have 4 installations of Fedora 14 running on a Win 2008 R2 server in Hyper-V.
When I try to ping my desktop or the host server via the hostname from within any of the Fedora installations, the ping fails. I can ping by IP without issue. Also if I try to ping the VMs from my desktop it fails. I have an XP VM setup that I can ping without issue via hostname and IP.
All of the VMs can access the Internet without issue. I have disabled all firewalls on all systems with no luck. My desktop can ping the Hyper-V server without issue so it would appear that the problem lies with the Fedora installations.
My resolv.conf
Code:
Does anyone have anything I can try to get the name resolution working?
Ubuntu Networking :: SSH Not Working By IP But With Hostname
Jul 19, 2010I just finished installing ubuntu server 9.10 - fairly new. I couldn't run SSH when I use IP address of the server. I've also setup DynDNS that returns responses when I ping. SSH works fine when I use the hostname of my server (leopard) but SSH doesn't work when I use IP.I was expecting IP for "eth0" something starting with 192.168.x.x as are my other computers running WIN on the same network.Any ideas why
1) Why am I not able to run SSH from IP assigned to server by DHCP. It works when I use machine hostname (leopard)
2) Why SSH isn't working from DynDNS web hostname when it responses back the ping command.
Ubuntu Networking :: No Address Associated With Hostname?
Oct 6, 2010ok so when i sudo apt-get update i get a bunch of crap that says no address associated with hostname
ive googled this and changed my /etc/hosts to all sorts of things and no luck apache wont even work now either. this server is for a few websites the company i work for hosts. currently i swaped it over to another windows based comp but we want it on ubuntu.
ive heard this is dns related? and that a FQDN is needed? if so im not sure how to re write my /hosts file but as of not it looks like this:
Code:
127.0.0.1localhost
63.119.120.135speed
# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
[Code].....
Ubuntu Networking :: Can't See Server On LAN With Hostname
Mar 22, 2011I have set up an Ubuntu 10.10 server with SAMBA shares and Apache web server. Everything was working fine. Then there was a power failure and after I restarted the server the XP pc's can see the server using the hostname. They can only see it using the ip adress. I haven't change anything on server or client side. Just the restart of the server.
View 3 Replies View RelatedNetworking :: Gateway Changing Hostname?
Mar 14, 2010I am coming across a strange error with my gateway. When I do a "ping", this is what I get below:k-63a5b848c6cb4:~ # ping simba PING simba.gateway.2wire.net (192.168.1.69) 56(84) bytes of data.
64 bytes from k-63a5b848c6cb4 (192.168.1.69): icmp_seq=1 ttl=64 time=0.041 ms
64 bytes from k-63a5b848c6cb4 (192.168.1.69): icmp_seq=2 ttl=64 time=0.029 ms
64 bytes from k-63a5b848c6cb4 (192.168.1.69): icmp_seq=3 ttl=64 time=0.023 ms
[code]....
Networking :: Cannot Ping Via Hostname Ubuntu 10.10 VM
Apr 6, 2011I have a Windows 7 machine that I have an installation of Ubuntu 10.10 via VMware and am having an issue with pinging by hostname thorugh the VM. From the Windows 7 machine I can ping by name without any issue but not with the VM. I have the VM as bridged so it is pulling all the network stuff via DHCP including the correct DNS servers. I can ping all the DNS servers and host without any issue. I have verified my /etc/resolv.conf entries are all correct.
If I run nslookup via the VM it says:
PHP Code:
I have also verified that AVAHI is running to cache the DNS stuff and still no success.
Networking :: Configure DNS To Resolve Hostname
Sep 8, 2010I got an application deployed on Websphere Application Server on SUSE Linux V 10. We are accessing the application using the IP address in the URL. Please let me know how to configure the DNS, so that we can use the Host name in the URL and the Host name is automatically mapped to the IP address.
View 1 Replies View RelatedNetworking :: Gateway Changing The Hostname?
Mar 14, 2010I am coming across a strange error with my gateway. When I do a "ping", this is what I get below:
k-63a5b848c6cb4:~ # ping simba
PING simba.gateway.2wire.net (192.168.1.69) 56(84) bytes of data.
64 bytes from k-63a5b848c6cb4 (192.168.1.69): icmp_seq=1 ttl=64 time=0.041 ms
64 bytes from k-63a5b848c6cb4 (192.168.1.69): icmp_seq=2 ttl=64 time=0.029 ms
64 bytes from k-63a5b848c6cb4 (192.168.1.69): icmp_seq=3 ttl=64 time=0.023 ms
64 bytes from k-63a5b848c6cb4 (192.168.1.69): icmp_seq=4 ttl=64 time=0.015 ms
Does anyone know what the problem could be?
Networking :: Specify Hostname (in Local Box, Not In DNS Server)
May 31, 2010What is the right way to specify hostname(in local linux box, not in DNS server):
myhost1
or
myhost1.mydomain1
Networking :: HOSTNAME Shows As None From Terminal
Feb 12, 2010I had always worked fine with my Red hat 4.0 untill yesterday night when i logged in i had an error saying: "HOSTNAME could not be found, you can resolve this by editing the /etc/hosts"eventually it logged me in but when i launch the terminal ...i now see 'username@(none)dir' .In other words my HOSTNAME shows as 'none'.I looked into /etc/hosts file but everything looks the same, which for is:127.0.0.1 mluboya,
View 8 Replies View RelatedNetworking :: Ping Debian On Hostname
Mar 31, 2010How I can ping my debian computers on their hostname?
I have installed both samba and winbind and I have also changed the line in /etc/nsswitch.conf to:
Hosts: files wins dns
I have done the same thing on another linux box (ubuntu) just to see if that worked and it did - I could ping it on the hostname.
Also, I have trid to add the ip/hostname in /etc/hosts and even that didn't work.
The /etc/resolv.conf seems to be as it should.
In the /etc/hostname the hostname is updated.
I have tried to restart the samba service and the networking service and even the entire computer but none of it worked.
Networking :: Ping Hostname - Just Like Windows?
Feb 7, 2011Is there a way to ping the hostname in linux just like windows?
View 3 Replies View RelatedNetworking :: Setting Hostname For Install ?
Apr 28, 2011Coming from a regular syslinux prompt is there any way to set the node's hostname? Basically I'm trying to start an install and the syslog= parameter needs to have the hostname set. It doesn't look like it's getting set by DHCP.
View 7 Replies View RelatedNetworking :: Squid3 Access Log Hostname ?
Feb 3, 2010I have Squid3 running and SARG for producing report. I would like to see the hostname being logged in the access.log file instead of the client IP address. I have already set the option log_fqdn=on and it doesn't do it. I still see the client IPs in access.log files...
View 4 Replies View RelatedNetworking :: How To Learn What's Hostname / So Others Can Login To PC
Apr 30, 2010I've setup openssh in my ubuntu.How can I learn what's my hostname so the others can login to my pc?
View 3 Replies View RelatedNetworking :: Unable To Resolve IP To Hostname
Aug 1, 2010i searched the internet on how to resolve IP to hostname in my internal network. However, i could not find any solution to it. Any gurus around have any knowledge on this? i have tried whois, dig and nslookup however it doesnt give me anything.
View 1 Replies View RelatedFedora Networking :: No Hostname On Windows Workgroup?
Mar 8, 2009So everything seams to be fine on my F10 boxes networking. I can ping computers on the network with both LAN IP addresses, and their hostnames. However, I can only access my F10 box with a LAN IP. In windows, I go to view workgroup computers... only the windows systems. If I go to the F10 system with samba via the IP address it works fine, just can't get to it with a hostname.
I'm wanting a static IP of 192.168.1.22. And on the windows workgroup "workgroup".
I'm new to doing things with linux that are remotely difficult... and well, this has proven to be. I can't work out if this is a SMB problem, general networking...
smb.conf (I've ommited the top info segment due to forum character limit, as well as the SELINUX notes)
Code:
#======================= Global Settings =====================================
[global]
# ----------------------- Netwrok Related Options -------------------------
#
[Code].....
Fedora Networking :: How To Change Hostname To Rodder
Oct 1, 2009Yesterday, while trying on establishing mobile broadband, my hostname changed, and I can't make it yet. My /etc/hosts is
1 127.0.0.1 pc-194-101.fysik.uu.se localhost.localdomain localhost
2 127.0.0.1 pc-194-101.fysik.uu.se roddur
3 ::1 localhost.localdomain roddur
The second line I edited but after a reboot it inserted the first line all automatically and my /etc/sysconfig/network is
1 NETWORKING=yes
2 HOSTNAME=roddur
What I have to do if I have to change my hostname to "roddur"?
Fedora Networking :: Edit The Hostname File?
Sep 5, 2011I got a diferent domain. I got a modem-router (192.168.1.254 ) thats connect my computer with apache (192.168.1.68) I got dinamic dns with inadyn to update the ip adress for my domains. My question how to edit the hostname file (/etc/hosts)?
[Code].....