I have the latest Ubuntu (9.10) desktop. My 2 cards are:
WiFi: Intel(R) Wireless WiFi Link 5100
Ethernet: Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller
Is there any way to get drivers working? My hardware switch is on and i have Ubuntu 9.10 running persistently on my usb so i can download the drivers etc. and install them.
I am a user of Ubuntu 10.04 and I use Firestarter because it lets me know which IPs I am connected to, which ports are used, and which applications are using those ports. The problem is that I can't use Firestarter with my non-sudo account (well, I know that I can change my system settings to do that, but I'd rahther not do it).
So the question is: Is there any application that lets the user monitor the internet connection?
I recently installed Fedora 15 now, and during installation I set the internet connection manually, then did update and after reboot, the internet connection settings have been removed. Now I can not set because the network connection to the Internet Connection is inactive. I mention that before the update was functional internet connection.
View 5 Replies View RelatedI've got a Ubuntu Server Linux router that I've got 2 internet connections hooked to. One of them is DSL and the other is cable.
What I'd like to do is have everything go through the DSL connection EXCEPT for one desktop, I'd like that system to go through cable for everything.
Here's a diagram of how I've got things set up.
[URL]
I don't have any more expansion slots on the mainboard of my server for another NIC, also I do a lot of file transferring between a laptop and the desktop I want on the cable connection so I don't want that slowing down the rest of my network.
I've got both providers set up in the providers file and I've got everything going through the DSL connection right now. So far everything I've tried has stopped the desktop from connecting out at all.
While using Ubuntu two other computers lose their connection. One (main) is connected to the modem, other from the switch to the wireless router, and the one with ubuntu wired via switch. Currently connected with Windows 7, other two are connected. Once booted into Ubuntu rest of the computers disconnect?
View 6 Replies View RelatedI Installed Ubuntu which was on the laptop before and this install doesn't want to work with a Internet connection. I know my connections is good and the Laptop is fine because it used to have dual boot and windows connected fine.
View 2 Replies View RelatedI'm trying to set up an openVPN server for a small office. I've gotten the server running, and configured keys, and been able to connect to the server. The trouble is that once I connect with my windows machine to the server, I am unable to bridge through to the www. I have combed through so many settings and tutorials, and I am confused as to how to set up the interfaces configuration file. Here's a sample of my routing table:
Code:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0
XXX.XXX.XXX.0 * 255.255.255.128 U 0 0 0 eth0
10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0
default XXX.XXX.XXX.1 0.0.0.0 UG 100 0 0 eth0
How should I be configuring this so that when I'm in the VPN I can get through to the internet?
I have a question, regarding the use of two internet connection on the same server. So, the thing is like this: The server will have 3 network adapters: connected to a DSL modem (on this adapter I have one of the internet connections, a PPPoE connection. It's only purpose is to share the internet connection to all LAN users using SNAT.
eth1 ----> the other internet connection, a much more expensive one actually, used for hosting a website, a domain name server, and a qmail server. eth2 ----> LAN connection So what I want is to make eth1 the "default gateway" (for outgoing mail, DNS requests, etc) and, as I said, use the ppp0 connection on eth0 only for internet sharing in LAN.
My question is (since I'l configure this server in about one week), does anybody have any suggestions regarding how could I accomplish this? I mean, I'm affraid that ppp0 will also try to use the default gateway from the other internet connection and vice-versa. Now, I know I can use the ip route/ip rule commands, but for many reasons I'd like to keep it simple and not use them.
I have two internet connections. One is wired ADSL Broadband & another is USB EVDO modem. I can use only one source at a time. That means the traffic will pass through either ADSL or EVDO. Other connection just sits idle. I want to use both the connections together so that I will have increased bandwidth. Is there a way to do that?
My computer has one NIC card. Both ADSL & EVDO use dynamic IPs.
I have a firewall ( a pc with debian 5) with 2 internet connections. each connected to a ethernet card (the firewall has 2 ethernet pci cards so it has one connection per card)how can i balance the internet requests from my LAN using this 2 connections?
View 3 Replies View RelatedI have to configure squid server which will have two internet connections on two separate lan cards and both will run simultaneously.I know how to configure squid server with one internet connection
View 4 Replies View RelatedI'm running ubuntu lucid and i was thinking in purchasing one or more extra wifi cards to try to configure my computer to manage different conections at the same time, with different isp's. The thing is that I'm not quite sure if what i want to do is actually possible.
The easiest way that crossed my mind was to try to configure a / multiple virtual machines that are redirected threw proxies to ubuntu and try to configure that each proxie port goes threw a different internet gateaway. This way i might be able to divide threw different sessions of JDownloader, installed on each virtual machine, the things i want to download. The negative aspect of this idea is having multiple jdownloader sessions will make my laptop work to almost 100% for sure...
Another thought i have was to make JDownloader manage its downloads in only one session redirecting them to my internet conections; the negative thing is that i think i will have to try to modify its source and learn java...
And well my last possible configuration i had in mind was to try to make ubuntu directly add up all my internet conections manage as if it was one. the negative thing here is that i might not be able to get multiple downloads from some sites
Well, all this where just thoughts, im struggling whether to buy another card or not to try to setup any of this configurations but im not really sure if any of them are actually possible. Is there an easy way to manage this?
I just want to take the most out of my internet conections... if i'm at college i have to options that are quite slow, adding them up with two cards would be great, i might also be able to add a third and a fourth conection. Also if i'm on a coffe and i need some bandwith i could try to make it go with an open network arround, etc.
Can I bind 2 interent connections or more on same fedora server to create bigger one with double bandwidth ,or it needs a specific router to be able to do this.
View 1 Replies View RelatedI have seen several threads lately about slow internet connections here and elsewhere, but I haven't seen anyone post a reply about blacklisting ipv6 so I am curious as to why?Is ipv6 enabled only on certain distro's or is there some other reason that it's not mentioned?
<If anyone wants to try it, to see if it would work for them>
On Slackware 12.2 and Salix 13.0 just add "blacklist ipv6" to the /etc/modprobe.d/blacklist file. I'm not sure about non-slackware based distro's. Unfortunately, I don't know any way of doing it without rebooting.
My problem is that I would like to load balance or aggregate 2 separate Internet connections on my laptop. Currently a hard line ISP is not available so I'm using an Sierra Wireless 885 USB air card. Thing is the card is quite slow. I also can tether an iPhone to the laptop. The ideal solution would be to have both connections being utilized to help speed up the overall experience, even if it is only a modest gain in speed.
as I do not know much about iptables and basic TCP/IP routing, I'm finding it difficult to implement those solutions. If someone can point me in the right direction ( a slightly dumb down how:to? or better explained? )
BTW, both phone and aircard get dynamic IP's. Running Ubuntu 10.4
My linux box has 3 network adapter. eth0 connects with ISP, eth1 is for staff network, eth2 is for public user. I want to limit the usage of internet bandwidth. for example, the traffic going through eth0, 75% is for staff network, 25% is for public user.In addition, I setup shorewall on it for port forwarding and filtering, but I felt the traffic shaping of shorewall is complex. I don't need the specific TOS, but only the percentage. could you give me some suggestion?Which software or package I should use to achieve this goal?
View 3 Replies View RelatedI have a machine that I'm trying to setup as a reverse web proxy. It will have two NICs, eth0 will face the public network, and eth1 will face the "internal" network (connects to a switch that goes out to the other web servers that are statically assigned a private IP address).
When both interfaces are started, I can ping hosts on the 1.2.3.0 network and the 192.168.10.0 network without problem when doing so by IP, but if I try to run a ping or nslookup command with a DNS name, it does not work. I've tried commenting out my entries in /etc/resolv.conf and adding the DNS entries in the /etc/sysconfig/network-scripts/ifcfg-ethX files directly (DNS1=x.x.x.x and DNS2=x.x.x.x), but the results are the same.
'm running on Ubuntu and I've succesfully setup apache alongside with a working php & mysql configuration - other computers connected to the LAN can access it by typing in my ip: 192.168.0.9however I would like my webserver to be accessible by all internet users...I've got my ports.conf file in the apache setup to listen on ports 80 and 8080 this is my ports.conf:PHP Code:
Listen 80
Listen 8080
Listen 2000
[code].....
I have problem on VPS running opensuse. When I enable firewall outbound connections stop working. I have tried everything I know (not much when it comes to firewall (iptables)) but could not solve this.
Here is my ifconfig:
Code:
I used xxx.xxx.xxx.xxx to hide real address.
I am trying to connect my desktop to my laptop over a non-internet connected LAN, but when i enable the LAN connection on my desktop (the one with the wireless) its internet stops working.
it is a very similar problem to this except that i am using ubuntu for the machine with the two connections.
right now i have my wireless on the 192.168.1.* address space, while the LAN is to be on 192.168.5.*
note: my goal is not to share internet with my laptop, just be able to connect to it and the internet at the same time.
desktop: ubuntu 9.10 , wireless and LAN
laptop: windows xp, LAN only
I have been looking around the forums searching for similar problems, it seems not only me had this problem. About a month ago I did a regular update via Upd Manager. The next day - no wired connection.Still managable, since the local library has wireless. Now that won't work either.Just after I upgraded from Jaunty, I accidentally removed NetwMngr from the top right corner of the screen, but that should not have anything to do with how the program works, right? I now cannot reach NM, if I run it from the terminal, nothing happens visibly.
View 5 Replies View RelatedI have a Dell Latitude D530 Laptop (500 GB HDD). Installed Windows XP and then Ubuntu 10.10 to do dual boot. everything works fine in Windows XP.In Ubuntu 10.10 I had issues connecting to Internet(Through Wirelss), I was able to rectify this issue by dsiable ipv6 from firefox about:config and setting true to network.dns.disableIPv6. After this I was able to connect to internet and browse websites from Firefox.But I am having Issues with Evolution Mail(Connection Timed Out) and Google Talk Client(Connection Timed Out).Empathy Internet Messaging gets connected fine.I was wondering if I will have to disable IPv6 System wide and hence I added the following lines to /etc/sysctl.conf
#disable ipv6
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
[code]....
I have a strange problem for internet. My clients (winxp - S2) can't get internet.Let me explain my scenerios. Fedora 10 with lan (eth0) having direct internet from dsl model, client (XP service pack 2) can use samba shares using dhcp (wlan0) installed in Fedora 10 box. client can ping my linux box.Now problem is: client (dosbox) can ping the google ip address (i.e ping 74.125.39.106) but can't use 'ping www.google.com'. That means ping with ip works for internet from my client. My linux box can. I can use internet from FC10 but can't use iexplorer from my client to have internet. I have enable ipmasquarding in Firewall and dhcpd is running on wlan0 for dynamic ip address of my clients.Can someone suggest me what kind of problem having I? What should i do to success iexplorer for internet? what possibly am i missing?
View 3 Replies View Relatedhave a problem with my network-manager in ubuntu 10.10.when I dial one of my vpn connections, my other vpn connections be disabled and I can't use them!I tried to restart network-manager and gnome-panel, but it does't seem to solve this problem.
View 1 Replies View RelatedI can't upgrade to Ubuntu 10.10 because it said that there's a problem with my network connection. When there's none, since I am typing this now.
View 2 Replies View RelatedFor some reason my Ubuntu computer will not connect to the internet when the router uses WPA but is fine with WEP the sooner this is fixed the better because my ubuntu computer is down until this is solved . But I know the Ubuntu community and I am sure we will resolve this in no time.
View 9 Replies View RelatedI know Ubuntu can do amazing things, but I was wondering if it can use different Internet connections for different websites.
The Setup: We have 1x unshaped ADSL connection at 4MBPS (fastest available) that's used for office related things, Skype, General browsing etc. We have another ADSL connection, this time shaped and running at 4MBPS, I want to send all requests to facebook, twitter and downloading sites like fileserve, filesonic, hotfile etc. to the shaped connection. Can iptables be used to do this? The unshaped ADSL router is connected to eth0 and has an IP of 192.168.0.1 the shaped ADSL router is connected to eth2 and has an IP of 10.0.2.1 Local lan is connected to eth1 and has a range of 192.168.1.0/24 Can iptables send a certain webpage (*.facebook.*) to eth2 and other pages (*.google.*) to eth0 ?
I am trying to write a shell script that will block any outgoing Internet connection, focusing mainly on the HTTP connections.
It would be nice if this command could work on both Mac OSX and Linux.
I can ping my router, i can ping google and i can ping the ip address you get in the ubuntu help.If i type 192.168.1.1 i can get my router control panel/i just cant connect to the web,
View 1 Replies View RelatedOften i have an active connection on the tree network with an internet dongle according networkmanager, but ping is not working and firefox and thunderbird also don't have a connection. Skype however is working at that time. (testcall to skype is working) My present solution is to disconnect and connect a couple of times again until i can ping a commonserver on the internet, and then everything is working normal. Many are stating networkmanager is buggy, is this a known bug and is it worked on or do i need to install another program. Has any of you an idea what could be going on and how to solve it, permanently. In the way it's automatically right when connecting.
My dongle is of type: Huawei E 1550 and often i have a normal connection.
