I am a user of Ubuntu 10.04 and I use Firestarter because it lets me know which IPs I am connected to, which ports are used, and which applications are using those ports. The problem is that I can't use Firestarter with my non-sudo account (well, I know that I can change my system settings to do that, but I'd rahther not do it).
So the question is: Is there any application that lets the user monitor the internet connection?
I want to find out which server/service a streaming box connects to and maybe also take a look at some packets. The box connects to the Internet via a Linux gateway running Debian I have root access to. I have some basic knowledge about iptables, tcpdump, netstat etc. but couldn't yet figure out how to get this info.
My first approach was with netstat, but this traffic seems not to be visible (which somehow makes sense to me). My next guess was that with iptables it should be possible to log this connections, however I couldn't yet figure out how to.
I have the latest Ubuntu (9.10) desktop. My 2 cards are:
WiFi: Intel(R) Wireless WiFi Link 5100
Ethernet: Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller
Is there any way to get drivers working? My hardware switch is on and i have Ubuntu 9.10 running persistently on my usb so i can download the drivers etc. and install them.
I recently installed Fedora 15 now, and during installation I set the internet connection manually, then did update and after reboot, the internet connection settings have been removed. Now I can not set because the network connection to the Internet Connection is inactive. I mention that before the update was functional internet connection.
View 5 Replies View RelatedI've got a Ubuntu Server Linux router that I've got 2 internet connections hooked to. One of them is DSL and the other is cable.
What I'd like to do is have everything go through the DSL connection EXCEPT for one desktop, I'd like that system to go through cable for everything.
Here's a diagram of how I've got things set up.
[URL]
I don't have any more expansion slots on the mainboard of my server for another NIC, also I do a lot of file transferring between a laptop and the desktop I want on the cable connection so I don't want that slowing down the rest of my network.
I've got both providers set up in the providers file and I've got everything going through the DSL connection right now. So far everything I've tried has stopped the desktop from connecting out at all.
While using Ubuntu two other computers lose their connection. One (main) is connected to the modem, other from the switch to the wireless router, and the one with ubuntu wired via switch. Currently connected with Windows 7, other two are connected. Once booted into Ubuntu rest of the computers disconnect?
View 6 Replies View RelatedI Installed Ubuntu which was on the laptop before and this install doesn't want to work with a Internet connection. I know my connections is good and the Laptop is fine because it used to have dual boot and windows connected fine.
View 2 Replies View RelatedI'm trying to set up an openVPN server for a small office. I've gotten the server running, and configured keys, and been able to connect to the server. The trouble is that once I connect with my windows machine to the server, I am unable to bridge through to the www. I have combed through so many settings and tutorials, and I am confused as to how to set up the interfaces configuration file. Here's a sample of my routing table:
Code:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0
XXX.XXX.XXX.0 * 255.255.255.128 U 0 0 0 eth0
10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0
default XXX.XXX.XXX.1 0.0.0.0 UG 100 0 0 eth0
How should I be configuring this so that when I'm in the VPN I can get through to the internet?
I have a question, regarding the use of two internet connection on the same server. So, the thing is like this: The server will have 3 network adapters: connected to a DSL modem (on this adapter I have one of the internet connections, a PPPoE connection. It's only purpose is to share the internet connection to all LAN users using SNAT.
eth1 ----> the other internet connection, a much more expensive one actually, used for hosting a website, a domain name server, and a qmail server. eth2 ----> LAN connection So what I want is to make eth1 the "default gateway" (for outgoing mail, DNS requests, etc) and, as I said, use the ppp0 connection on eth0 only for internet sharing in LAN.
My question is (since I'l configure this server in about one week), does anybody have any suggestions regarding how could I accomplish this? I mean, I'm affraid that ppp0 will also try to use the default gateway from the other internet connection and vice-versa. Now, I know I can use the ip route/ip rule commands, but for many reasons I'd like to keep it simple and not use them.
I have two internet connections. One is wired ADSL Broadband & another is USB EVDO modem. I can use only one source at a time. That means the traffic will pass through either ADSL or EVDO. Other connection just sits idle. I want to use both the connections together so that I will have increased bandwidth. Is there a way to do that?
My computer has one NIC card. Both ADSL & EVDO use dynamic IPs.
I have a firewall ( a pc with debian 5) with 2 internet connections. each connected to a ethernet card (the firewall has 2 ethernet pci cards so it has one connection per card)how can i balance the internet requests from my LAN using this 2 connections?
View 3 Replies View RelatedI have to configure squid server which will have two internet connections on two separate lan cards and both will run simultaneously.I know how to configure squid server with one internet connection
View 4 Replies View RelatedI'm running ubuntu lucid and i was thinking in purchasing one or more extra wifi cards to try to configure my computer to manage different conections at the same time, with different isp's. The thing is that I'm not quite sure if what i want to do is actually possible.
The easiest way that crossed my mind was to try to configure a / multiple virtual machines that are redirected threw proxies to ubuntu and try to configure that each proxie port goes threw a different internet gateaway. This way i might be able to divide threw different sessions of JDownloader, installed on each virtual machine, the things i want to download. The negative aspect of this idea is having multiple jdownloader sessions will make my laptop work to almost 100% for sure...
Another thought i have was to make JDownloader manage its downloads in only one session redirecting them to my internet conections; the negative thing is that i think i will have to try to modify its source and learn java...
And well my last possible configuration i had in mind was to try to make ubuntu directly add up all my internet conections manage as if it was one. the negative thing here is that i might not be able to get multiple downloads from some sites
Well, all this where just thoughts, im struggling whether to buy another card or not to try to setup any of this configurations but im not really sure if any of them are actually possible. Is there an easy way to manage this?
I just want to take the most out of my internet conections... if i'm at college i have to options that are quite slow, adding them up with two cards would be great, i might also be able to add a third and a fourth conection. Also if i'm on a coffe and i need some bandwith i could try to make it go with an open network arround, etc.
Can I bind 2 interent connections or more on same fedora server to create bigger one with double bandwidth ,or it needs a specific router to be able to do this.
View 1 Replies View RelatedI have seen several threads lately about slow internet connections here and elsewhere, but I haven't seen anyone post a reply about blacklisting ipv6 so I am curious as to why?Is ipv6 enabled only on certain distro's or is there some other reason that it's not mentioned?
<If anyone wants to try it, to see if it would work for them>
On Slackware 12.2 and Salix 13.0 just add "blacklist ipv6" to the /etc/modprobe.d/blacklist file. I'm not sure about non-slackware based distro's. Unfortunately, I don't know any way of doing it without rebooting.
My problem is that I would like to load balance or aggregate 2 separate Internet connections on my laptop. Currently a hard line ISP is not available so I'm using an Sierra Wireless 885 USB air card. Thing is the card is quite slow. I also can tether an iPhone to the laptop. The ideal solution would be to have both connections being utilized to help speed up the overall experience, even if it is only a modest gain in speed.
as I do not know much about iptables and basic TCP/IP routing, I'm finding it difficult to implement those solutions. If someone can point me in the right direction ( a slightly dumb down how:to? or better explained? )
BTW, both phone and aircard get dynamic IP's. Running Ubuntu 10.4
My linux box has 3 network adapter. eth0 connects with ISP, eth1 is for staff network, eth2 is for public user. I want to limit the usage of internet bandwidth. for example, the traffic going through eth0, 75% is for staff network, 25% is for public user.In addition, I setup shorewall on it for port forwarding and filtering, but I felt the traffic shaping of shorewall is complex. I don't need the specific TOS, but only the percentage. could you give me some suggestion?Which software or package I should use to achieve this goal?
View 3 Replies View RelatedI'm using ubuntu 11.04 and have a DSL connection straight from my local telephone (landline) provider.I need a ubuntu app, preferably a daemon/service (that I can start up on boot) that, in essence, can simply log to a file, on a per session basis (with timestamps of course), the bandwidth I use (download + upload bytes).
I'm not interested in logging site info etc., just want raw data usage so at the end of the month I can run some summary reports on it.Basically I was to see if my ISP is cheating me or not (and in general to control myself on my HUGE ..... + ISO download habbits)..I need nothing fancy, even a basic command will do in which case i'll be happy to write my own basj script for that...
Is there a nice easy to use tool that displays (in KB/s) the internet traffic from every IP on a network?
Currently I'm using iptraf, but it's very hard to understand at times.
A little info on my network:
I'm using SNAT for internet sharing.
Ubuntu system monitor applet doesn't show internet traffic although my wireless is working just fine. I use a conky to monitor bandwidth through vnstat and had no problem till I upgraded to maverick.
**ifconfig
wlan0 Link encap:Ethernet HWaddr 00:24:d2:c4:3e:da
inet adr:192.168.0.100 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: fe80::224:d2ff:fec4:3eda/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
I have a 2 machine LAN with both machines having an ethernet card and a wireless card. There is a Netgear router, both eth and WiFi, allowing both machines to access the internet.
On my Linux machine I am looking for some software that allows me to keep track of my broadband usage on that machine, excluding traffic between the two machines.
There are numerous such programmes for this in XP, which use Winpcap and a GUI frontend. The "other" machine on my LAN is XP and uses just such a program.
For windows, zonealarm will pop up a window when someone attempts to connect to a port on your computer.Is there a GRAPHIC utiliity like that for Fedora/linux? Not Command Line. (ss, tcpdump,. etc...)
View 8 Replies View RelatedWhere can I find a complete list of all the logs in the system?
I would like to know the following:
Which were the last connections to my machine (IP addresses) What were the files accessed by that IP address
I am using CentOS (don't remember the exact version it's probably 5.6 or 6.0).
have a problem with my network-manager in ubuntu 10.10.when I dial one of my vpn connections, my other vpn connections be disabled and I can't use them!I tried to restart network-manager and gnome-panel, but it does't seem to solve this problem.
View 1 Replies View RelatedI know Ubuntu can do amazing things, but I was wondering if it can use different Internet connections for different websites.
The Setup: We have 1x unshaped ADSL connection at 4MBPS (fastest available) that's used for office related things, Skype, General browsing etc. We have another ADSL connection, this time shaped and running at 4MBPS, I want to send all requests to facebook, twitter and downloading sites like fileserve, filesonic, hotfile etc. to the shaped connection. Can iptables be used to do this? The unshaped ADSL router is connected to eth0 and has an IP of 192.168.0.1 the shaped ADSL router is connected to eth2 and has an IP of 10.0.2.1 Local lan is connected to eth1 and has a range of 192.168.1.0/24 Can iptables send a certain webpage (*.facebook.*) to eth2 and other pages (*.google.*) to eth0 ?
I am trying to write a shell script that will block any outgoing Internet connection, focusing mainly on the HTTP connections.
It would be nice if this command could work on both Mac OSX and Linux.
When setting up my server I noticed that I could control the amount of connections; the maximum seems to be 256. My server is currently windows 2003 server which is unlimited connections - before I change the server to F10 I need to be able to have unlimited connections (I often go over 256 connections, I have 25 web sites hosted). How do I do this on F10 or is there a better distro for web servers that have thousands of Internet connections at the one time?
View 4 Replies View RelatedI am wondering if it is possible to force internet/external SSH connections to authenticate with a public key and allow local connections to connect via user and password?
View 5 Replies View RelatedI am using Red Hat Linux enterpriser 4 using two physical LAN cards.There are two different ISP internet lines coming into a single gateway computer. Is it possible that if in our one network we are using 2 MB bandwidth and from another network we are getting 2 MB bandwidth.(Two different Networks) and combine it into 4 MB. In bonding it combine the bandwidth or it do loadbalancing ?
The question is can we accumulate or add these two bandwidth in Linux machine and it sent total bandwidth 4 to the end users ?
Lan Card A
IP Address: 192.168.1.250 2MB Bandwidth
l
l
l
[Code]....
I'm having a bit of Internet trouble with a fresh install of Ubuntu Natty and I haven't been able to track down the problem. I have my desktop running over a wireless network, which connects without fail. Somewhat frequently, however, connections to particular websites will start timing out (google, facebook, stackoverflow, us ubuntu archive, etc.). I'm also having a strange issue where my home page [URL] is redirecting to [URL].
Initially I thought it might be an issue with Comcast DNS, so I updated the router to use OpenDns servers. When that didn't work I started to try accessing some of the problematic sites through my laptop (which is using the same router) and they all connect without problem. The issue seems to be with my Ubuntu install, but I'm not sure where to look.
EDIT After doing some further digging, this is starting to look like a DNS issue. My home page appears the resolve to an incorrect ip address when the redirect issue occurs. Still not sure how to track down the problem, however.