Fedora Networking :: Two Internet Connections On F10 Server?
Feb 25, 2009
I have a question, regarding the use of two internet connection on the same server. So, the thing is like this: The server will have 3 network adapters: connected to a DSL modem (on this adapter I have one of the internet connections, a PPPoE connection. It's only purpose is to share the internet connection to all LAN users using SNAT.
eth1 ----> the other internet connection, a much more expensive one actually, used for hosting a website, a domain name server, and a qmail server. eth2 ----> LAN connection So what I want is to make eth1 the "default gateway" (for outgoing mail, DNS requests, etc) and, as I said, use the ppp0 connection on eth0 only for internet sharing in LAN.
My question is (since I'l configure this server in about one week), does anybody have any suggestions regarding how could I accomplish this? I mean, I'm affraid that ppp0 will also try to use the default gateway from the other internet connection and vice-versa. Now, I know I can use the ip route/ip rule commands, but for many reasons I'd like to keep it simple and not use them.
View 4 Replies
ADVERTISEMENT
Apr 11, 2009
Can I bind 2 interent connections or more on same fedora server to create bigger one with double bandwidth ,or it needs a specific router to be able to do this.
View 1 Replies
View Related
Feb 3, 2010
I have to configure squid server which will have two internet connections on two separate lan cards and both will run simultaneously.I know how to configure squid server with one internet connection
View 4 Replies
View Related
Jun 22, 2009
I have two internet connections. One is wired ADSL Broadband & another is USB EVDO modem. I can use only one source at a time. That means the traffic will pass through either ADSL or EVDO. Other connection just sits idle. I want to use both the connections together so that I will have increased bandwidth. Is there a way to do that?
My computer has one NIC card. Both ADSL & EVDO use dynamic IPs.
View 1 Replies
View Related
May 30, 2011
I recently installed Fedora 15 now, and during installation I set the internet connection manually, then did update and after reboot, the internet connection settings have been removed. Now I can not set because the network connection to the Internet Connection is inactive. I mention that before the update was functional internet connection.
View 5 Replies
View Related
Mar 24, 2011
I've got a Ubuntu Server Linux router that I've got 2 internet connections hooked to. One of them is DSL and the other is cable.
What I'd like to do is have everything go through the DSL connection EXCEPT for one desktop, I'd like that system to go through cable for everything.
Here's a diagram of how I've got things set up.
[URL]
I don't have any more expansion slots on the mainboard of my server for another NIC, also I do a lot of file transferring between a laptop and the desktop I want on the cable connection so I don't want that slowing down the rest of my network.
I've got both providers set up in the providers file and I've got everything going through the DSL connection right now. So far everything I've tried has stopped the desktop from connecting out at all.
View 2 Replies
View Related
Apr 7, 2010
I have the latest Ubuntu (9.10) desktop. My 2 cards are:
WiFi: Intel(R) Wireless WiFi Link 5100
Ethernet: Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller
Is there any way to get drivers working? My hardware switch is on and i have Ubuntu 9.10 running persistently on my usb so i can download the drivers etc. and install them.
View 7 Replies
View Related
Jun 7, 2010
I am a user of Ubuntu 10.04 and I use Firestarter because it lets me know which IPs I am connected to, which ports are used, and which applications are using those ports. The problem is that I can't use Firestarter with my non-sudo account (well, I know that I can change my system settings to do that, but I'd rahther not do it).
So the question is: Is there any application that lets the user monitor the internet connection?
View 1 Replies
View Related
Feb 17, 2010
I have a firewall ( a pc with debian 5) with 2 internet connections. each connected to a ethernet card (the firewall has 2 ethernet pci cards so it has one connection per card)how can i balance the internet requests from my LAN using this 2 connections?
View 3 Replies
View Related
Oct 22, 2010
On my server I some times login from my home where I have an internet connection which does not have a static IP each time I switch on my modem a dynamic IP isgenerated.I see in auth.log logs of following lines Quote:reverse mapping checking getaddrinfo forkkts-kk-dynamic-01.1.168.192.some_broadband.in [192.168.1.2] failed - POSSIBLE BREAK-IN ATTEMPT Accepted publickey for root from 192.168.1.2 port 22852 ssh2when ever I login to my server from home.In this case I do know that it was me who logged in but still why do I see such a log.What is this complaining about?
View 11 Replies
View Related
Sep 18, 2010
While using Ubuntu two other computers lose their connection. One (main) is connected to the modem, other from the switch to the wireless router, and the one with ubuntu wired via switch. Currently connected with Windows 7, other two are connected. Once booted into Ubuntu rest of the computers disconnect?
View 6 Replies
View Related
Oct 29, 2010
I Installed Ubuntu which was on the laptop before and this install doesn't want to work with a Internet connection. I know my connections is good and the Laptop is fine because it used to have dual boot and windows connected fine.
View 2 Replies
View Related
Jul 13, 2011
I'm trying to set up an openVPN server for a small office. I've gotten the server running, and configured keys, and been able to connect to the server. The trouble is that once I connect with my windows machine to the server, I am unable to bridge through to the www. I have combed through so many settings and tutorials, and I am confused as to how to set up the interfaces configuration file. Here's a sample of my routing table:
Code:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0
XXX.XXX.XXX.0 * 255.255.255.128 U 0 0 0 eth0
10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0
default XXX.XXX.XXX.1 0.0.0.0 UG 100 0 0 eth0
How should I be configuring this so that when I'm in the VPN I can get through to the internet?
View 9 Replies
View Related
Sep 18, 2009
I have seen several threads lately about slow internet connections here and elsewhere, but I haven't seen anyone post a reply about blacklisting ipv6 so I am curious as to why?Is ipv6 enabled only on certain distro's or is there some other reason that it's not mentioned?
<If anyone wants to try it, to see if it would work for them>
On Slackware 12.2 and Salix 13.0 just add "blacklist ipv6" to the /etc/modprobe.d/blacklist file. I'm not sure about non-slackware based distro's. Unfortunately, I don't know any way of doing it without rebooting.
View 5 Replies
View Related
May 25, 2010
I'm running ubuntu lucid and i was thinking in purchasing one or more extra wifi cards to try to configure my computer to manage different conections at the same time, with different isp's. The thing is that I'm not quite sure if what i want to do is actually possible.
The easiest way that crossed my mind was to try to configure a / multiple virtual machines that are redirected threw proxies to ubuntu and try to configure that each proxie port goes threw a different internet gateaway. This way i might be able to divide threw different sessions of JDownloader, installed on each virtual machine, the things i want to download. The negative aspect of this idea is having multiple jdownloader sessions will make my laptop work to almost 100% for sure...
Another thought i have was to make JDownloader manage its downloads in only one session redirecting them to my internet conections; the negative thing is that i think i will have to try to modify its source and learn java...
And well my last possible configuration i had in mind was to try to make ubuntu directly add up all my internet conections manage as if it was one. the negative thing here is that i might not be able to get multiple downloads from some sites
Well, all this where just thoughts, im struggling whether to buy another card or not to try to setup any of this configurations but im not really sure if any of them are actually possible. Is there an easy way to manage this?
I just want to take the most out of my internet conections... if i'm at college i have to options that are quite slow, adding them up with two cards would be great, i might also be able to add a third and a fourth conection. Also if i'm on a coffe and i need some bandwith i could try to make it go with an open network arround, etc.
View 1 Replies
View Related
May 18, 2010
My linux box has 3 network adapter. eth0 connects with ISP, eth1 is for staff network, eth2 is for public user. I want to limit the usage of internet bandwidth. for example, the traffic going through eth0, 75% is for staff network, 25% is for public user.In addition, I setup shorewall on it for port forwarding and filtering, but I felt the traffic shaping of shorewall is complex. I don't need the specific TOS, but only the percentage. could you give me some suggestion?Which software or package I should use to achieve this goal?
View 3 Replies
View Related
Mar 22, 2009
When setting up my server I noticed that I could control the amount of connections; the maximum seems to be 256. My server is currently windows 2003 server which is unlimited connections - before I change the server to F10 I need to be able to have unlimited connections (I often go over 256 connections, I have 25 web sites hosted). How do I do this on F10 or is there a better distro for web servers that have thousands of Internet connections at the one time?
View 4 Replies
View Related
May 12, 2010
My problem is that I would like to load balance or aggregate 2 separate Internet connections on my laptop. Currently a hard line ISP is not available so I'm using an Sierra Wireless 885 USB air card. Thing is the card is quite slow. I also can tether an iPhone to the laptop. The ideal solution would be to have both connections being utilized to help speed up the overall experience, even if it is only a modest gain in speed.
as I do not know much about iptables and basic TCP/IP routing, I'm finding it difficult to implement those solutions. If someone can point me in the right direction ( a slightly dumb down how:to? or better explained? )
BTW, both phone and aircard get dynamic IP's. Running Ubuntu 10.4
View 6 Replies
View Related
Feb 20, 2009
'm running on Ubuntu and I've succesfully setup apache alongside with a working php & mysql configuration - other computers connected to the LAN can access it by typing in my ip: 192.168.0.9however I would like my webserver to be accessible by all internet users...I've got my ports.conf file in the apache setup to listen on ports 80 and 8080 this is my ports.conf:PHP Code:
Listen 80
Listen 8080
Listen 2000
[code].....
View 5 Replies
View Related
Feb 25, 2011
I have a bunch of Ubuntu boxes on one subnet, 192.168.1.0. I have a Windows 7 box on another subnet, 192.168.2.0. I am able to ping and SSH to all servers on the .1 subnet except for one server, which I will call PITA. I will attempt to SSH to PITA, and it won't respond, nor does it respond to pings. I will the SSH to PITA from another of the test servers, successfully connect, and then when I SSH from my Windows 7 machine I can connect successfully. If I first connect via console to PITA and send some pings out (to anywhere, like 4.2.2.2), I can also connect from my Windows 7 machine. I've never seen anything like this.
One of the weird things is that I used PITA to create an image that I then used to create many of the other test servers, and they work fine, so I'm not sure what the problem is. I've checked /var/log/messages and syslog and there's nothing in them that indicates a problem. I've rebooted this server, restarted SSH, changed the IP in case it was conflicting with something else, forced an ARP update in case it was cached (since I had bonded the interfaces), cleared the ARP cache on my own machine, verified Network Manager is not installed...and I still have this issue.
Here are some network-related config:
/etc/network/interfaces
Quote:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
[code]....
View 3 Replies
View Related
Feb 18, 2011
Our DBA has an application running on Server2 which needs to connect to Server1 (Linux OEL5.5 server) thru port# 9171. I use telnet to test basic connectivity.What should I do on Server1 in order to open up port#9171 for connection.
View 4 Replies
View Related
Dec 1, 2009
I have a Fedora 11 system and cbq.init-v0.7.3 in it. Now I want to restrict upload speed from my ftp server to Internet (eth1). According to docs I've made a simple file /etc/sysconfig/cbq/cbq- 00.inet_upload_restrict:
DEVICE=eth1,100Mbit,10Mbit
RATE=800Kbit
WEIGHT=80Kbit
PRIO=5
RULE=:20,
So as you can see I want to limit outbound traffic on eth1 from my ftp port 20 to any to the 800Kbit/s (100Kbyte/s). Now I do cbq start, it says: find: warning: you have specified the -maxdepth option after a non-option argument (, but options are not positional (-maxdepth affects tests specified before it as well as those specified after it). Please specify options before other arguments.
find: warning: you have specified the -maxdepth option after a non-option argument (, but options are not positional (-maxdepth affects tests specified before it as well as those specified after it). Please specify options before other arguments. but it starts and works. Now I check the speed and it is...
View 3 Replies
View Related
Jan 27, 2011
I just installed Fedora 14 in a hard disk of my PC. I installed MySQL also. I dontt know if this is the correct site for my question, but nobody MySQL related, have an answer yet. For MySQL accepting remote connections, my.cnf file must be edited (bind-address line or skip-networking line in that file). Well, that file in my Fedora-MySQL installation does not have such lines, so i assume, TCP/IP connections are allowed in MySQL. When i try to connect to the MySQL server it refuses the connection with the error 2003, that in short, means no TCP/IP connections are allowed. I disabled the firewall and retried but with no success, enabled the firewall again, and nothing happen. Is Fedora not accepting TCP/IP connections?
View 5 Replies
View Related
Jul 1, 2010
tell me the maximum limit of connections FTP server
View 2 Replies
View Related
Jun 18, 2009
once I updated , there will be no connections to Internet in GUI , while it's available in TUI . So it's wired , huh ? Before upating, it's available both in TUI and GUI, though all the time the network-manager shows no connection , in fact , there is and both GUI and CUI . Now I updated , and it can't access Internet from GUI.
View 2 Replies
View Related
Sep 1, 2010
Latest kernel update since Fedora 2.6.33 are mapping all my NFS "shares" twice (two sets of icons, etc.). All work, but why is this happening - was fine previously.
View 2 Replies
View Related
May 27, 2009
ok so the router works in windows and i know the config details of it.i can see other wifi access points in the area but not my one. i have tried joining it as a "hidden network" to no avail.is there any reason why fedora would not detect my own wifi when it detects substantially weaker signals instead??
View 2 Replies
View Related
May 11, 2011
I use Fedora 14 and Firefox as my web browser. I use Astrill VPN service. I have the following persistent problem: I start my computer. Astrill is not set to start on boot. I start Firefox. Firefox can not connect to anything, it says 'proxy server refusing connections'. I go to Edit>Preferences>Advanced>Network>Settings I click the radio button 'no proxy'. The problem remains. I am completely unable to connect to the net. Even on reboot, I cannot connect. On reboot, Firefox is set to use a proxy, although it was not on shutdown. Some init script is setting this. My normal connection is often faster than through Astrill, so I only really need to use it when I want to get at a website that is blocked by the govt here in China.
where Firefox is being told to use a proxy, and how to reset it to not use a proxy, assuming Astrill is not active. There must be something left in a .conf file somewhere which is overriding the settings in Edit>Preferences. Because, if I set it now to 'no proxy', I cannot connect to the net.
View 5 Replies
View Related
May 24, 2009
On a Fedora 11 machine, I configured ppp0 on eth0 and ppp1 on eth1, each one is connected to a modem, I also defined ppp0 as the default gateway.. Should I do anything else to load balance the 2 connections or will ppp1 take some of the load by default? Should I add any other routing rules? If yes then please tell me what should I add, keeping in mind that for each pppoe connection both the pppoe address and the remote address are not static so I actually needed some scripting to change the default gateway each time the remote pppoe address changes.
View 4 Replies
View Related
Jul 13, 2009
Just moved over from the dark side (Vista) and was wondering how I can get two (or more) PPTP VPNs connected at any given time. I usually attempt to multi task (although swambo says I can't) and work on various clients' servers at the same time. The GUI network manager thingy only allows me to dial up one VPN at a time. Is there perhaps a cli version and if so where would I go to get a tutorial on this please. BTW, running F11 32bit. Tried Debian and Ubuntu as well and found F11 to blindingly fast on my DualCore Toshiba laptop. Pity I can't see the additional 1Gb of RAM though. (4Gb in total).
View 2 Replies
View Related
