Ubuntu Servers :: Lose Network After Reboot - Every Time
Aug 17, 2010
Whenever I reboot my server, it looses all network connectivity. It can't see the LAN nor the internet. I have to issue the following:
Code:
ifconfig eth0 down
ifconfig eth1 down
ifconfig eth1 up
This will get the server talking to the LAN, but still not to the internet. To get that I have to do:
Code:
route add default gw 192.168.0.1
Then I'm up and running.
But why?
Granted I only have to reboot now and then (after a power failure, or, like last night where the server was actually heating the house too much on a hot August day) but why is this happening? It is like these settings are temporary and are lost on shutdown.
View 4 Replies
ADVERTISEMENT
May 31, 2010
I have just removed ndiswrapper and installed Realtek RTL819se!! How ever after I restarted I lose my wifi and have to do change directory to use ./wlan0up to get it working again.
View 1 Replies
View Related
Jan 30, 2011
When I log onto my 10.04 server via ssh, there is the /etc/motd displayed. This motd is made up each time by the files in /etc/update/motd.d/. There is this one file : update-motd-reboot-required The content is exec /usr/lib/update-notifier/update-mot-reboot-required and the content of this one is : if the file /var/run/reboot-required exists, print it.
But who is making this file and why ?we know who it is: it's pam_motd.. but why would I reboot ??!?
editt2 : nvmd [URL]
View 1 Replies
View Related
Oct 12, 2009
I am losing network bandwidth and I am quite frankly I am not sure why, I don't have allot memory 495.6Mib
But I clean my PC every few days "BleachBit"
I have read some where on the magazine Network receiving suppose to be higher. so how can I fix this issue please i am having allot problems, u use cable from Comcast
I am not quite sure what Information you might need from me to give.
I use Ubuntu 8.04 LTS
View 1 Replies
View Related
May 12, 2011
I find that I prefer have both panels located at the screen top. That way I don't have to go to the bottom of the screen for one thing, then back to the top for another. I arranged the panel so the regular top one is on top,then the panel that contains the open applications is underneath.The problem is, when I reboot, the panels lose their order. First, the regular top panel initializes, then the bottom ones starts and pushes the first panel down, which becomes what you see in the picture: I would like to find a way to keep them in the opposite order of what you see in the picture, but every time I reboot they end up in that order.
View 4 Replies
View Related
Feb 10, 2011
Last night I created a fresh install of Ubuntu Server 10.10. I was working through a tutorial to set up a development server for home use, and everything worked perfectly. I was able to install OpenSSH, Apache, MySQL, and PHP (and Vim) with no problems. I was also able to use "ifconfig" to determine the network address of the server and I was able to view web pages on the server from another machine on my home network, using a browser. So, everything was "peachy". [By the way: The server is connected to the router using a CAT5 cable. This is a WIRED connection] I shut the Ubuntu server down at the end of the night and, now that I have rebooted this morning, I have apparently lost the network interface. I cannot ping anything from the server. If I run ifconfig, only the "lo" configuration is listed, with the 127.0.0.1 address.
[Code]...
View 5 Replies
View Related
Jun 8, 2011
I'm running ubuntu 10.10, in a Gateway M-6750. I can't get my wireless to work properly.
After I lose my wireless signal, I can't connect to a network again. I have to restart my computer or, remove the ndiswrapper module and insert it again so that I can connect to the network again.
I do this with:
Also, there are sometimes when the computer freezes up when trying to search for a signal.
View 1 Replies
View Related
Aug 12, 2014
I am using mini.iso to install Jessie from network and I need lose setup command that is required by cryptsetup for mounting the detached header of an encrypted volume. Is there a way to get losetup from network during installation? For example by means of anna-install? Does any package from udeb.list contain losetup?
View 0 Replies
View Related
Mar 23, 2010
what the recommended way to set up real-time (or near real-time) folder synchronization among 2+ servers. I looked a rsync but that doesn't sound real-time and it looks like its something that you might put in a cron once an hour.
View 1 Replies
View Related
Mar 29, 2010
I have several file servers in our offices and I am relatively new to Ubuntu / Linux. I get notices that there are updates for the server software from time to time. Is it typical to update everything when available or should I follow "If it ain't broke, don't fix it..." mentality?I would hate for everything to be working fine and then have an update throw me a curve.
View 9 Replies
View Related
Apr 11, 2011
I am running my Ubuntu 32 bit server on top of Windows 7 64 bit with VirualBox. It's a 2 core Atom. It's been working good for about half a year. But the last about 6 weeks the system time only in Ubuntu is going slow. About -8 per 24 hours! I can only guess because I have more things running in my Windows 7 and Ubuntu.
I can set it right by coping the hareware time to system time with this command:
Code:
hwclock --hctosys
I want to run a crontab to have that command run every minute. But it don't seem to run.
[Code]...
View 9 Replies
View Related
Mar 21, 2010
I am using Ubuntu 9.10. Every time I try to reboot my system it hangs. Shutdowns work properly. I've done multiple re-installations. Nothing I've tried fixes the problem. Does anyone have any suggestions?
View 4 Replies
View Related
Sep 1, 2011
Is there a way to determine the time of last reboot and open all sessions and/or files that were open with a BASH script?
Oh also on this topic, does anyone know where a good repository of BASH, PERL and other Linux System Scripts are?
View 3 Replies
View Related
Oct 3, 2009
I've got fedora 11 set up to use network time protocol to sync my laptop's date & time when I'm on-line. The question is simple really, I've added a local universality's time server (what is public) and it's live. but it's added to the end of the default time servers what come with fedora. How do I get fedora to just use the local time server, is it a case of removing the default time servers for fedora, but there is a box what says advanced options which are. sync system clock before starting service ???? & use Local time source (( is that the same as the local ntp server that I've got set up ))Hope some body can help me with the network time protocol part of Date/Time settings.
View 9 Replies
View Related
Oct 20, 2010
In the right upper corner of your screen,you can see if you have a network connection or not.Most of the time I do not have one according to Networkmanager (?).So I have to enable my wired connection manually.I already tried a lot to change my settings so I would have a network connection at boot,but it doesn't seem to work....Firefox is in Offline modus when I logon..
View 2 Replies
View Related
May 16, 2015
if I have to reset my system for any reason or even logging out my pavucontrol resets to my built in audio instead of sticking to my HDMI like I want it to.I can manually configure a file I will, I just need to know where to start.I will provide hardware info when asked for it, just need a feeler here.I am running Debian Jessie KDE 64bit
View 1 Replies
View Related
Jan 6, 2011
Every time I reboot my computer the system time always comes up exactly 10 hours behind where it should be. So if I reboot it at 16:00 it comes up as 06:00.
This has only been happening since I got back from a trip to Australia, where I naturally changed the computer's timezone to match the local one. I'm now back in Central European Time which is 10 hours behind Australia's. This is on opensuse 11.3.
I've used the YAST date and time tool to set the timezone correctly, and /etc/localtime is set correctly:
Code:
:~> sha1sum /etc/localtime
b065fae6bda0f0642ca6a52b665768e34a99d213 /etc/localtime
:~> sha1sum /usr/share/zoneinfo/Europe/Berlin
b065fae6bda0f0642ca6a52b665768e34a99d213 /usr/share/zoneinfo/Europe/Berlin
[Code].....
View 9 Replies
View Related
Aug 8, 2010
I was wondering if any one came across that issue before. Everytime I reboot my PC something (I assume GNOME) reset my system clock to an hour behind what is was the last time. So if a reboot twice in a row that'll be two hours behind and so on. It used to work fine until I had to change my system time backward temporally to overcome and issue with GPG. Since I put it back I get that phenomena. It's like it's adjusting it for the Day light saving everytime a boot. Problem is Japan does not have any day light saving. I run OpenSuse 11.2 with Gnome 2.28.2 as my interface. I'm currently located in Japan GMT+9 not DST. /etc/localtime -> /usr/share/zoneinfo/Asia/Tokyo
I suspect a bug in Gnome or Yast. It's not user specific because the time is already altered even before I log it.
View 13 Replies
View Related
Jan 2, 2011
Every time I reboot my computer the system time always comes up exactly 10 hours behind where it should be. So if I reboot it at 16:00 it comes up as 06:00.
This has only been happening since I got back from a trip to Australia, where I naturally changed the computer's timezone to match the local one. I'm now back in Central European Time which is 10 hours behind Australia's. This is on opensuse 11.3.
I've used the YAST date and time tool to set the timezone correctly, and /etc/localtime is set correctly:
Code:
:~> sha1sum /etc/localtime
b065fae6bda0f0642ca6a52b665768e34a99d213 /etc/localtime
:~> sha1sum /usr/share/zoneinfo/Europe/Berlin
b065fae6bda0f0642ca6a52b665768e34a99d213 /usr/share/zoneinfo/Europe/Berlin
[Code]....
View 1 Replies
View Related
Jul 15, 2009
I'm running a CentOS 5.2 vm on a W2K8 hyper-v core server. The problem I have is that when I reboot, the system time always resets itself to 6:00 am in the morning. I tried the /sbin/hwclock --systohc command but it hasn't taken hold.
View 1 Replies
View Related
Jul 21, 2010
I change the audio channels to 6 in alsamixer by choosing my sound card and change the channels to '6ch'. But this setting is not preserved. I see that after a reboot the channels are again going back to 2ch. I have to manually change everytime to 6ch after each reboot. Is there a way to save the setting in alsamixer so that I will get 6ch everytime after reboot? I am not sure I have explained my problem in a way so that you can understand.
View 2 Replies
View Related
Sep 1, 2010
Dual boot system. Boot Linux Fedora 13 and the hardware clock is set to GMT. Boot Windows 7, time is wrong, as it expects the hardware clock to be set to the local time. reset the hardware clock each time I reboot in to the other O/S.
View 5 Replies
View Related
May 26, 2011
I upgraded from fedora 14 to fedora 15 yesterday. I live in India (IST) which is GMT +05:30. Every time I boot, my system clock increases its time by 5 and a half hours. For example, system clock on my machine is now Wednesday May 26,2011 22:44. If I were to reboot now, the time I would get is Thursday May 27, 2011 04:14. How do I correct this?
View 14 Replies
View Related
May 30, 2011
Just installed F15 using preupgrade (from F14) and now, every time I reboot, time jumps backwards 4 hours. If I reboot twice in a row without correcting the time, time will be off by 8 hours. Time zone is set correctly (Eastern Time). "Synchronize date and time over the network" is unchecked.
Since the difference between GMT and Eastern time is 4 hours, there appears to be some confusion over that but I can't find anything in the "Date & Time" app relative to that to try to play with to see if I can correct this. II do remember a similar issue many releases ago but I can't remember how it was dealt with.
Any ideas on how to diagnose and fix this?
View 8 Replies
View Related
Aug 28, 2011
I will open firefox then scroll to file-quit firefox, firefox closes fine but when i want to open firefox again it wont, i have to restrate opensuse 11.4 linux 2.6.37.6-0.7 kde 4.6.0.0.
View 3 Replies
View Related
Oct 26, 2010
The CPU frequency scaling monitor won't stay at 800mhz after reboot or a certain period of time. My goal is to always have my dual core CPU locked at 800mhz to have it run cooler. I'm running Ubuntu 10.10 on my toshiba u300 laptop.
View 4 Replies
View Related
Nov 15, 2010
System time was drifting ahead increasingly for several days time in the end. This is what I did with the clock about 6 hours "in the future":
Quote:
sntp -P no -r pool.ntp.org
hwclock --systohc
i.e. I got the (more or less) exact time from the time server and set the hardware / BIOS timer with this value.I renamed "/etc/adjtime" to beginn with a clean slate. During reboot (shut down phase) I noticed a message saying something like: "hwclock set to system time". I checked in the BIOS and there was a new time about one hour early(!). The boot phase then reset the time again, this time several hours forward (usually two to six hours). This is an iterating process, with a net gain of several hours per boot. It is not always whole hours -- like in a time zone error but it involves also minutes. System is set to UTC as affirmed by the "date" command. What could be the cause of this behaviour of the clock / timer?
View 14 Replies
View Related
Sep 4, 2009
After installation of Fedora 11, I click reboot, it ejects out the disk, but is stuck at the screen for a long time and doesn't reboot so I manually had to reboot it. Today, surfing on firefox, it got frozen, and the touchpad worked, but everything was frozen nothing moved so I had to manually shut the laptop down. On bootup everything was ok. Im worried about corrupted files.Should I just reinstall Fedora 11? m using a dell studio 1555 laptop
View 4 Replies
View Related
Feb 25, 2010
I just installed OpenSuse 11.2 3 months ago on my laptop. I'm running with the Gnome Desktop. I live in Chicago and am currently in London. When I set the timezone to Europe/UK the date/time are correct UNTIL I reboot the laptop. After reboot if I type in the 'date' command it shows the time at 6+ hours from London time. When I check the hardware clock 'hwclock' it displays the correct London time. I check the time setup with yast and it shows the correct Timezone but again shows the 6+ hours difference. I change the time in yast and and my applications ( e-mail) display the correct local time again... UNTIL I reboot and then I'm right back where I started - wrong local time ! I suppose I could write a little startup script to do a 'hwclock --hctosys' but I thought I'd check here first to see if anyone out there had any ideas..BTW - I hate to say this but on the same laptop running XP I don't have this problem AND I didn't see this problem in OpenSuse 10.3 or 11.1
View 9 Replies
View Related
Mar 5, 2010
I'm using Ubuntu 9.10, and a usb webcam that is shown as 'Bus 001 Device 005: ID 0ac8:3450 Z-Star Microelectronics Corp.' by lsusb.
The problem is that on connecting the cam, it just works with the first program I start (skype, tokbox, messenger), and if I disconnect it or switch to another program, it stops to work and I have to restart my computer to make it work again.
Is there some good solution to reset the camera without rebooting to make it work again?
View 1 Replies
View Related