Ubuntu Networking :: 11.04 Causes Westell 327W To Lose It's Internet Connection
Jul 31, 2011
I use a Westell 327W dsl modem/router to connect to the internet. I installed Ubuntu 11.04 on two computers. My desktop is connected with ethernet and works perfectly. However, when I connect my laptop with wifi, it causes the router to lose it's internet connection. All connected devices are affected. The only way to fix the problem is to shut off and turn on the router again. This problem only happens with with the laptop and Ubuntu. I use the same laptop with Win7, and it connects fine. I also have no problems connecting my Android phone or PS3 to the router. The wifi in the laptop is an Atheros model.
I have tried no security, WEP, and WAP. The result is the same with all three settings. I can still access the router config from any device 192.168.1.1 after the internet goes out. The DSL led on the router stays on, and the config says the DSL connection is active.
View 1 Replies
ADVERTISEMENT
Sep 7, 2010
I have an ASUS G50Vt laptop with Ubuntu 10.04 installed on it. I have a WiFi Link 5100 wireless device. I use these settings to connect to it:URL...My problem is, once I connect, within 30 seconds I lose my Internet connection. It goes on and off seemingly whenever it wants. Is there something I'm missing? Some kind of driver issue or something else I need to change?I can connect to the non-secure connections fine, just when I try to use the secure one it craps out. Halp?
View 6 Replies
View Related
Dec 5, 2010
I have a Acer Aspire 7535-5020 laptop with a Atheros AR5B91 wireless adapter & lose my connection after about 10 minutes.The only way to reconnect is by rebooting.I read in another thread that installing the linux-backports-modules-karmic would solve the problem.However when I try to install it I get the message, Error Dependency is notsatisfiable:Linux-backports-Modules-2.6.31-22 generic.
View 4 Replies
View Related
Apr 18, 2011
I have a server with two ethernet ports. I configured eth0 to be static, set at 10.1.10.148. I plugged in another router into the other ethernet port in order to configure that router. I configured eth1 to use dhcp. Using /etc/network/interfaces rather than gnome network manager. When I did this, I lost internet connectivity (internet routes through eth0 of course)
- Why did I lose internet connectivity?
In order to recover internet activity, I had to disconnect the new router on eth1 of course, and do sudo ifdown eth1. That wasn't enough however. After rebooting numerous times and pulling out my hair, I finally tried configuring eth0 as dhcp, rather than static, and this fixed the problem.
- Why didn't sudo ifdown eth1 solve the problem? What information was saved between reboots that somehow remembered that I plugged in the new router? Because my thinking was if /etc/network/interfaces was identical, and the network topology was identical, after a reboot everything should be restored, but it wasn't.
View 7 Replies
View Related
Mar 3, 2011
Im having trouble with my hp mini 110, i read abit of information about it on the site and installed a package that gets my wifi working, problem being is that as soon as I go upstairs i lose connection, its not really upstairs if I move more than 5 feet away from my router no internet although the laptop reads full signal.
I believe its a problem with the broadcom drivers, is there anyway to resolve this or do I have to go back to Windows 7 because I really dont wanna do that.
View 2 Replies
View Related
Jun 14, 2010
I was introduced to Ubuntu about a year ago and recently decided to come back to using the OS. I now dual boot it with Windows XP Home. My former setup was with Wubi but now I have it installed on an actual partition. (The Wubi install, for whatever reason, had little internet problems.) I use wireless internet, and though my network card was recognized out of the box and can connect to my network, the Internet is very slow. It takes almost a minute to look up Google. Also, Firefox will often report that it cannot find the server for whatever website I try to look up, after trying to connect to it/look it up. I also cannot access the web configuration page for my router. (192.168.1.1). The network app reports that I often have a signal strength of 40% or lower. The following is my hardware/internet:
Ubuntu 9.04 Jaunty
TrendNet TEW-424UB adapter (54mbps)
Westell VersaLink 327W router
ISP: CenturyTel/CenturyLink High speed internet (512kbps)
I am the only Linux computer on my network. (There is no encryption on my network. I know there should be. but my parents are not very computer literate and they are the ones who have access to the network. It is easier just to go without.)
I have tried disabling ipv6, setting custom DNS server names under ipv4, and setting the wlan rate (or something similar) to 1492. Nothing works. This does not seem to be a network problem because my internet works fine in Windows, and I can access the configuration page for my router to change channels, PPP, etc..
View 1 Replies
View Related
Oct 12, 2009
I am losing network bandwidth and I am quite frankly I am not sure why, I don't have allot memory 495.6Mib
But I clean my PC every few days "BleachBit"
I have read some where on the magazine Network receiving suppose to be higher. so how can I fix this issue please i am having allot problems, u use cable from Comcast
I am not quite sure what Information you might need from me to give.
I use Ubuntu 8.04 LTS
View 1 Replies
View Related
Jan 9, 2011
I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies
View Related
Oct 13, 2010
I set up a vpnc connection, and it says it connects fine, but then I have no internet connection at all, and cannot ssh into the remote server(the reason i need this vpn) or do anything else involving the internet.I question if it actually connects at all, as sudo vpnc myconf.conf only shows the connect banner and never progresses from there.
View 4 Replies
View Related
Jan 24, 2010
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
View 5 Replies
View Related
Oct 21, 2010
I tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed. I tried offline/online, that did not work either. when I click the firefox It says you are not connected.
View 1 Replies
View Related
May 1, 2011
I seem to have is trying to get the internet to work. I can go to ..... ect but when I try to run playonlinux it says you do not seem to be connected to the internet, please post if you have anything useful, as I said I am very new to linux so be as detailed as possible.
View 4 Replies
View Related
Jun 21, 2009
I have installed Fedora 11 recently. I want to share my Internet connection.
I have e LAN connection eth0 which is connected to internet.
I have a Wireless connection wlan0.
I want to share my internet connection with wireless connection.
View 3 Replies
View Related
Feb 4, 2010
I have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.
View 5 Replies
View Related
Oct 31, 2010
I have the "Work Offline" problem: when I boot up, the icon on the toolbar tells me I have "No network connection". This is not quite true, since I can access the first page of any website - only subsequent pages are inaccessible. I get a message saying that Firefox is offline. However, when I uncheck "Work Offline" in the File menu, it makes no difference to this behavior.
The problem is on my Ubuntu Dell desktop, which is connected to the internet with cable broadband via a D-Link router (wired connection). It has worked fine up till now. I use Ubuntu 10.04 and Firefox 3.6.11. I am writing this on my Ubuntu Dell laptop which is wired to the same router, so I assume the problem is not the router. I have tried various strategies suggested in threads on these forums, including editing about:config, changing "allow" to "deny" in some lines of /etc/dbus-1/system.d/NetworkManager.conf and changing from Automatic (DHCP) to Automatic (DHCP) Addresses only, but no luck so far. The contents of ifconfig are:
eth0
Link encap:Ethernet HWaddr 001:aa0:91:a7:51
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets: 0 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisons: 0 txqueulen: 1000
RX bytes: 0 (0.0 B) TX bytes: 0 (0.0 B)
[Code]...
If I comment out "auto eth0" as well, it makes no difference. If I uncomment both lines ("auto eth0" and "iface eth0 inet dhcp") then I lose the internet connection altogether.
View 4 Replies
View Related
Sep 13, 2010
I just started using OpenSUSE on an old laptop. It seems that I have my graphical problems at least temporarily solved, but I continued to lose my wireless connection after an hour of use. This is an old and well supported chipset (RT2500) and I had never had any issues with it before. I use WPA security, and one kind poster suggested I had a line for using the old "wext" driver in the /etc/sysconfig/ifcfg-wlan0 file, and that seems to have sorted it since I have not had any further issues since doing that edit. I eventually found the information on my own:
# Note: This option requires a wpa driver supporting it, like
# the 'nl80211' driver used by default since openSUSE 11.3.
# When you notice problems with your hardware, please file a
[code]....
View 9 Replies
View Related
Jun 1, 2011
I just installed Ubuntu 11.04 desktop on my desktop in dual boot with Windows 7.
Heres my problem, I am unable to connect to the Internet even though my wired Ethernet connection says it is connected normally. The wierd thing about this is that I also have a wireless card in my desktop and when I connect through that I am able to connect to the Internet. I am connecting to a router that is functioning as a repeater to my main router/cable modem. I have tried to solve this myself but am having no luck. Ironically, earlier today suddenly my ethernet connection worked for a few minutes without me modifying anything.
The output of some terminal commands are below.
Quote:
Quote:
Quote:
However a pint to that ip address (my router) is successful.
Quote:
Hosts.allow and hosts.deny are both fine (not blank but no entries)
View 1 Replies
View Related
May 31, 2010
I have just removed ndiswrapper and installed Realtek RTL819se!! How ever after I restarted I lose my wifi and have to do change directory to use ./wlan0up to get it working again.
View 1 Replies
View Related
Jul 8, 2010
I'm using ubuntu 10.04 dual boot with windows xp. Recently I'm having problems using the internet, I can connect to our wireless network but can't use the internet, firefox just says error on opening the page. But when im in windows xp i can surf and use the net. Is their a way to diagnose whats causing the problem. I use a Realtek RTL8187 wireless lan, it works fine before its just now that its not working with ubuntu.
View 4 Replies
View Related
Jan 11, 2011
I installed ubuntu 10.10 with windows 7 (dual boot) in my fujitsu lifebook. I use zoom ultra by Sentar EVDO MODEM ST880U. I tried pppoeconf or DSL or mobile broadband but fail to connecte internet. In first exprience on ubuntu 9.04 same via dell latitude with Huawei EC123 Data card.Any one can assist me to overcome the bad condition to like ubuntu as on offline mood in my work zone.Actually i used ubuntu 9.04 for my offline work in Dell. Now also same condition starts. Please help to come internet and enjoy ubuntu.
View 2 Replies
View Related
Jun 17, 2011
OS is Ubuntu 10.04. I have HomePNA-connection which is converted to Ethernet by Netsys NH-300 HomePNA-Ethernet adapter.
The problems that I have: Sometimes when I boot I don't get IP from DHCP. If try to ping any address I am told that host is unreachable. Sometimes this I can get IP by using command dhlient -r and dhclient to request new ip. Sometimes only way to get my connection to work is booting the computer.
Sometimes the connection works fine from the start but disconnects later for short time. Sometimes this happens every ten minutes, sometimes less often. If I wait for a while the connection might start working again, if not dhclient -r or reboot helps usually. But not always.
View 7 Replies
View Related
Apr 27, 2010
If I put my computer into sleep or hibernate, I have no wireless connection when I start up again. I click on the wireless manager in the tray, but wireless is disabled and I can't enable it. This never happened until I updated to Ubuntu 9.10.
I am using the b43 driver (I think), but I'm not sure which command to execute to display information about my wireless card.
View 2 Replies
View Related
Jul 21, 2010
I am running ubuntu 10.04 on a dell xps m1530 and when ever i shut the laptop then re open it I am disconnected from my wireless connection. I would love if when I opened it it would just stay connected. Is this possible?
View 1 Replies
View Related
Jan 16, 2011
I just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
View 7 Replies
View Related
Mar 6, 2010
I have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
View 3 Replies
View Related
Jan 18, 2010
I installed Ubuntu 9.10 using the default setup (Gnome I think) and on my Gateway Notebook using a wireless connection. It appears to be working great and I can even see my Windows drives and network storage on my home office systems.I have also set it up to run my favorite Bible software on Windows running under VirtualBox. I then installed the KDE Desktop so that I can select either desktop when logging on.
However, once I am in the KDE desktop, I cannot connect to the internet. I have checked and double-checked and the wireless settings seem to be the same on both the Gnom and KDE Desktops but still no network or internet connection when using KDE. I might mention that I am using the 64 Bit version of Ubuntu.
View 2 Replies
View Related
Feb 5, 2010
I am using Ubuntu 9.10 and trying to use Internet Connection Sharing through my Dell Mini 9 laptop.
The incoming internet is from wireless The outgoing internet is from Ethernet I am using a crossover cable as I have heard this is necessary I followed the 9.10 method on my Auto Eth 0 connection Here is a link to the Ubuntu Documentation I used The computer I am trying to share to does not pick up the internet being shared from the cable.
View 7 Replies
View Related
Apr 3, 2010
I have an EMachine T3095 with xp home os and ubuntu os. I install ubuntu in windows. In windows I don't load internet software, yet surfing the web fine in both os. Recently did complete re-installation of windows and ubuntu os, for got 3 trojan viruses on windows. Now can't get on the internet in windows. Emachine said I need to get motherboard downloaded to get LAN, which is not on windows software. Isn't the same motherboard used by ubuntu to get on the internet? Obviously some software has been corrupted? Which software could be the problem. Is there a link to download it?
View 2 Replies
View Related
May 6, 2010
I have a system with windows xp, and to connect to internet I use a usb card EVDO (brand ZTE) given by my provider (BSNL India).Now I installed ubuntu 10:04 but I do not know how to make my usb card work to connect to internet (the provider gave the software only for win xp)
View 9 Replies
View Related
May 20, 2010
I'm using 10.04 I tried to connect to a free WiFi connection. I had the password for it too. I had been able to access the connection 2 weeks ago with no real trouble. Now, the thing at the top of my screen indicates I'm connected BUT I can't get Firefox to access any sites. I can't download email using Thunderbird. Pretty strange isn't it?
View 8 Replies
View Related
